request intervento Técnico poweredge 1900 Server

Similar Questions

• Request intervento Técnico

  Buongiorno,

  Abbiamo need intervento di UN tecnico by individualization guasto vs e riparazione di Server PowerEdge R210II S. Tag 8QJJC5J.

  It PC if starts my TR blocca in fase di con start there 1 e 2 accesi.

  Restiamo in attesa di una vs cortese risposta.

  Saluti

  .

• Memory of PowerEdge 1900

  Hello. I have a Poweredge 1900 server, we have improved the memory of 4 GB to 16 GB.

  • Locations: 8 (4 banks of 2)

  The problem is that when I rebooted the server, he sees more than 4 GB. What Miss me?

  Thanks for any help.

  Yes, the 32 bit is limited to 4 GB.

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/aa366778 (v = vs. 85) .aspx

• PowerEdge 1900 and Poweredge 840 and NO hardware RAID SATA HD, FreeNAS with ZFS

  I searched these forums and the web in general a concise my questions answer, but nothing is done.  I just happen to find someone who is using 'old' technology and it retarget as much as you might think (I am a broke student by the way).

  I bought a Poweredge 1900 Server & server Poweredge 840 ebay about last year.  I've been busy and have yet to work with these two units.  I wanted to use the PE 1900 as a file server and then push a backup of these files on the server off site, the PE840.  I intended to buy four 1 TB or four disks SATA 2 to (WD Black or RED WD) for each system, respectively.

  I've been through a few videos on youtube the other day and discovered FreeNAS.  This seems to be a much better solution than the use of Ubuntu Server, but it also made me think about the hardware Raid with these systems.  If FreeNAS uses ZFS (software raid controller), you want to avoid a hardware raid controller.

  My current assumptions, please correct me if I'm wrong on any of the following:

  I think that each of these systems to support drives up to 2 TB?, I think that I can use the SATA drives and not SAS, four discs in each system drives.

  I believe that I can boot from USB flash drive (a quick, which I intend to install FreeNAS on which they recommend)

  I think I can connect readers to the Perc/Raid Controller controller (& just turn 'off' RAID), or simply directly on the motherboard.  (What woud be the advantages/disadvantages of the use of the card or simply by using the Council)

  I intend on working with what I have right now (cheap and available), then once I get this configuration work that I take it out of the sand/lab sandbox, upgrade the processors and ram up my budget will allow and go live with the installation program (if it is still possible)

  From now on, they are sitting in a corner, begging to consume energy, and fans of polute the soundscape with their cries (PE1900 precisely).  I know that I could pursue other options but I already these two units.

  I really want to utilze FreeNAS its serving capacity file and ZFS for its reliability.  Is it possible with this camera?, or should I junk them and move on?

  Thank you for your answer!

  I've done some research more and since FreeNAS is built off of FreeBSD supported hardware is the same.  I couldn't find a list for FreeNAS specifically so I looked to FreeBSD.  I was still confused about the material and decided to go forward with the poweredge 840, for two reaasons, there already 8 GB of ram and it is not as heavy to move on (from 1900). I shoot the raid controller (for simplicity) and I plugged in three 250 GB SATA drives and a 40 GB SSD.  I had to set the bios for the usb key is recognized and also due to adapt to be considered as a hard drive, then had to define the sequence of boot to the usb drive, acting as a hard drive.  Once all that has been said and done, I wrote my FreeNAS image on my USB and booted up.

  It took maybe 10 minutes and I was up and running (once I had configured the hardware and bios), I created a RaidZ (as proposed FreeNAS) and with my three 250 GB drives, it produced 453 GB of usable disk space.  The 40 GB SSD is used as L2ARC (from my cache of understanding), I tried the installer with and without the 40 GB SSD.  The difference was impressive, just opening the photos or streaming video on my laptop Win 8.1 (Dell 17r) is almost flawless, as if the files were stored locally.

  I was impressed by how quick and easy to use FreeNAS, simple and fast network shares can be configured with permissions that works quite simply not in less than 5 minutes.  I don't have Windows Server down, but generally configuration active directory takes a little more effort.

  I am satisfied for the moment and continues to experiment with the Poweredge 840 until I commit to a processor upgrade.  Once I acquire 16 GB memory for my Poweredge 1900 I will perform with her, as it has only 1 GB now, crazy.

  Thank you for your help.

• URGENT: su material guasto Poweredge 1900 - request intervento [GRO]

  Dell Poweredge 1900 fuori co

  Service etiquette: 5Wxg74J

  If e SC yesterday he server da solo. ORA non riconosce più I have brain Sarotherodon. The feeling e che mia he sistema vede non più scheda dove sono collegati RAID controller I have brain.

  Piccolo it display sul front yesterday era led colorato ambra e dava error PCI express Server B0 D4 F0 error fatal

  Codice of it leggo nella scheda Controller Raid E2K-UCS-51

  Chiedo con urgenza preventivo by di intervento UN tecnico vs a domicilio per risoluzione del problema. Grazie.

  Salve,

  The sto contattando by mail

  Saluti,

• PERC 4/Di in Poweredge 1900?

  Hello

  You can use the PERC 4/Di from a PowerEdge 2600 server in a PowerEdge 1900 or it is not compatible?

  Thank you.

  No, the PERC 4/Di is a built-in controller (RAID logic is on the motherboard) and is activated by the RAID key (otherwise, it's just a SCSI disk controller). The 1900 doesn't have the built-in ability to take a key or manage the RAID. You need a card. Get the PERC 6 / i.

  If you're talking about the PERC 4/DC (which is a card), it can work, but I still wouldn't use it.

• Fan sostitutiva Poweredge 1900

  Salve,

  If e una di UN nostro Server Poweredge 1900 fan rotta (serial number: FKLWM3J), could stuffed UN preventivo by a prodotto di ricambio?

  It would be preventivo da mandare a: [email protected]

  By the spedizione:
  1 nome società: Colorit Srl
  2. address: Via Tempio Pausania 4
  3 cities: Torino
  4 Provincia: to
  5 cap: 10137
  6 name/last name/number phone/e-mail del referent in loco: Alessandro Grasso / 011 311 94 96 / [email protected]

  With the fatturazione
  1 nome società: Colorit srl
  2. address: Via Tempio Pausania 4
  3 cities: Torino
  4 Provincia: to
  5 cap: 10137
  6 name/last name/number phone/e-mail del referent in loco: Alessandro Grasso / 011 311 94 96 / [email protected]
  7 partita IVA IT08060180018

  Grazie,

  Buona day

  .

• Request urgent di assistenza PowerEdge 840 [MS]

  Request urgent di assistenza PowerEdge 840

  Urgent in quanto if non abbiamo UN serverpoweredge 840 sul quale in vorremmo vostra assistenza Salvo production more...

  The luce arancione lampeggia al centro, con to display it I brought ABCD, pero e spento not everyday altre directions...

  The ha 3 brain in RAID macchina con vs controller proprietario. soluzione servirebbe by riaccenderla o cash i dati contenuti nei brain.

  Grazie attendiamo riscontro quanto prima... the bloccata e attivtà!

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  -Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• PowerEdge 1900 w / PERC5 / i or SAS5 / I under compatibility Win 2008

  I have a PowerEdge 1900 (internal SATA only now) that I plan on the deployment of Windows Server 2008 Standard (64 bit) on short time.

  When I bought the camera, not to not order any controller RAID; before installing Win2008, I would add one of the system.  The only options I can find are for the PERC5 / i and the SAS5 / I.

  Does anyone know if or the other of these controllers are supported on Windows Server 2008?  I would like to know before I have shell out money to buy a...

  Matt

  
  

• PowerEdge 1900 perc 5 / I controller battery replacement

  I have a replacement battery message in the Application to manage Open Dell for a Dell PowerEdge 1900 Perc 5 / i controller. If I replace the battery I lose the current RAID configuration? Also all the procedures available for the replacement of the battery?

  Thank you

  Jeff Hicks

  Here is a link to the manual, page 92 will give you the steps to replace the battery: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-1900_Owner%27s%20Manual_en-us.pdf

  Your RAID configuration is stored on the discs. Turn the power off and replace the battery, then start back. Upon request, accept the configuration of readers and move forward.

  Kind regards

• PowerEdge T105 server with SAS HBA PCI card compatibility model UCS - 70

  Hello

  We have a PowerEdge T105 server and want to connect Dell LTO-6 SAS Tape drive to this server.

  There are available PCI slots... but I wanted to know if this server can host this HBA card?

  Thank you

  Hello Suren24,

  Here is a link to the map you need to connect the drive LTO6 to. Accessories.us.Dell.com/.../ProductDetail.aspx

  Please let us know if you have any other questions.

• PowerEdge 1900 & WS2012r2

  Gents

  I decided to migrate my old WHS2011 about her inherited PowerEdge 1900.

  I have 10 SATA drives to transfer (sizes 1 to - 4TB). I started by moving the 3 x 2 TB SATA B, C & D Port drives so that they know. SATA is occupied by the SSD.

  Now, everything went sooth (hardware wise) all disks are recognized, to 3 x 2 disks are added to WS2012r2 Essentials Poll.

  I started the migration of data to free the other drives which I hope for you connect to Perc 5 and other PCIe SATA card, but what I've noticed, it's as writing speeds (when moving data on GBit NIC) 33.5 MB/s with occasional spikes 67.4 MB/s.

  I think it's because one of the SATA Ports (B, C or D) is ATA and limited at 33 Mbps. unfortunately I am struggling to find info on this.

  Someone knows the speed of the built-in SATA ports? or how to improve transfer speeds?

  As mentioned, I have some readers go so behalf of all ports.

  Thank you

  Daniel

  You are right. the bottleneck is not caused by SATA.

  I forgot to mention that the pool, I created the WS2012r2E using parity as a measure of redundancy. Apparently, the parity is to blame for low writing speeds - problem applicable only to the Scriptures known. Readings are fine.

  Thanks for responding

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  I have a PowerEdge 2850 server, that when he was initially put in place (by someone else) had Windows 2003 R2 top.  However, when they put in place, the partitioned the C: drive with so little space that it is running out of space.  We got a newer Dell server and I turned that 2850 off the coast.  It was interrupted for a month or two.

  But I would like to use it as a backup of database server.  Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  You need to install RAID drivers during the installation of 2008R2.

  1. Configure and initialize the RAID in the CTRL-M utility.
  2. Download and extract the drivers put on USB (or CD).
  3. Start on media 2008R2.
  4. On the screen that asks you where you want to install Windows, click on load a driver link at the bottom left.
  5. Navigate to the location of the RAID drivers.
  6. Choose the drive to install, then install.

• Request preventivo per batteria Controller PERC 6 / i by PowerEdge 1950 Server

  Buongiorno,

  come da oggetto sono a take UN preventivo per sostituzione di una batteria per controller it PERC 6 / I integrated by a server PowerEdge1950 in quanto it software Dell di administration lo tell in stato FAULT, low voltage.

  Speaking saluti.

  Buongiorno,

  the batteria Può acquistare online:

  Accessories.euro.Dell.com/.../ProductDetail.aspx

  Oppure take it supporto a pagamento tramite questo link:

  www1.euro.Dell.com/.../SS

  Todas

  Marco