FAQ section for formatter.iso does not exist!

Similar Questions

• a key for the table does not exist in the table

  Hi guys,.
  
  I imported several tables of physical layer in the administration tool. So, I want to do new foreign key between tables join in the physical schema.
  Required fields for posting a link between these tables are set up. When I press the ok button, an error message is displayed:
  "a key corresponding to the table does not exist in the table blablabla. You want to create a? »
  
  In fact, what is this error? I don't have all the idea about it. The number of the type of the fields is the same, the names are also the same. I think that he should not have problems to make the new foreign key. But why is it happening?
  
  Thank you

  Hello

  It is the primary key of the first table. You might not have set this column as the primary key of this table at the level of the db.

  Thank you
  Imtiaz.

• HP pavilion slimline s5370t - msg when you start asking for disk that does not exist

  After my HP Pavilion Slimline s5370t WIN 7.0 open and ready to go, a message appears saying that I did not insert the disc on the DVD player.  The thing of it is that there is no disc inserted, because there is no program, file, etc. that I want to run.  After that I click on 'Cancel' repeat the box and I cancel and repeats and cancel and then it disappears.  Later, when you use the PC the same thing happen sometimes without apparent reason.  The PC works fine otherwise.  Any ideas?

  Hi Paulsproblem,

  This exact error message, this is what I needed! This status.msi is part of a HP printer installation. You have recently installed a HP or made a update to one? The solution is to uninstall and reinstall the printer software. If you have an HP printer not informed me the model and I can give you a link to the software online if you don't have the original CD.

  Thank you

• error 1075 the dependency service does not exist or has been marked for deletion

  Im trying to find solutions for this error with windows vista. The only solutions with microsoft in the VISTA section is for xp machines. Go figure. Im trying to reboot the Client DHCP service and this is the error I get. (error 1075 the dependency service does not exist or has been marked for deletion). I tried to fix the registry key to match a working vista machine, but it did not work. This is the registry that I corrected. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP

  Just delete the registry entry and restart the system. It should work perfectly. It worked for me.

  1. Click Start, click run, type regedit in the Open box, and then click OK.
  2. In the registry editor, find and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP
  3. Right click on the entry DependOnService , and then click remove instead of change

• AppleID asks a password for an ID that does not exist

  When I try to update my apps on my phone I wonder to enter a password for an AppleID that does not exist.

  I am connected and can't seem to download applications, but not updated.  I don't have this problem with my iPad using the same account, just the iPhone.

  Help please!

  Girlactik wrote:

  When I try to update my apps on my phone I wonder to enter a password for an AppleID that does not exist.

  This identifier Apple is not simply "composed" without any basis.

  • The iPhone is already possessed?  Maybe it's the Apple ID of the previous owner?
  • Maybe it's the Apple ID you entered by mistake at settings > iTunes and App Store?  Or settings > iCloud?
  • Wouldn't be the Apple ID of the owner of the apps?  You use apps (or music or books) someone else bought?

• Save for precedent: the "Attachment" object does not exist in the previous version

  I'm trying to save a very simple VI from LabVIEW 2013 SP1 to LabVIEW 2009 but I get this strange error.  The VI contains only basic ex that are available in all versions of LabVIEW (shift logical AND Select,<=, u8). ="" when="" i="" try="" to="" save="" it="" for="" labview="" 2009,="" it="" gives="" me="" the="" following="">

  Missing object.  The "Attachment" object does not exist in the previous version.

  I thought first of all it had to do with being possessed by a lvclass, but even after that I removed the class (and unplugged from the lvclass) it always gives me this warning.

  When I try to open it with 2009, it will fail to load the schema-block (error 6).

  The next thing I tried was to copy the block diagram for a new VI and re - create the connector pane, but that doesn't change anything.

  Any ideas?

  Maybe "attachment" made reference to an attached comment (the arrow of a free label for an object on the diagram). I don't expect the presence of attached comments to cause a SFPed VI to not open, but it's the only thing I can think of. Try to remove any comment attached to your diagram and SFPing and see if that solved the problem.

• D110: Printer Destination does not exist - for D110 all-in-one

  This printer is connected via a Charter Communications wireless router wireless. Printing and scanning has been working well. 2 nights ago he stopped and we started getting the message "the destination printer does not exist" in the window of the printer.

  I am currently working on an iMac 10.6.8 running, but the same thing happened on a Macbook running the same. I just tried on this macbook again and he did print, although he had problems yesterday. Of course I tried earlier once more on the iMac and it did not work. I can print a page of test here, however.

  I tried the following:

  1 remove the printer and selling it.

  2 download a new copy of the driver and install it.

  3. follow the instructions to change the IP address via the web interface, stop the router and printer and then start up the two, router first, then the printer after it increased. relisted to the printer. The iMac certainly sees the printer for purposes of installation and status, but not for printing.

  What now?

  Thank you

  Ellen

  Hi@Ellen_B,

  I see you are having problems printing from Mac. I will definitely do my best to help you.

  Print a Network Configuration page to get the printer IPv4 address.

  Go to settings, wireless, print the Network Configuration Page.

  If you have a valid IPv4 address for the printer, then try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Safari)

  It loads the page Web has?

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If multicast is disabled on the router, you will not be able to add the printer as a Hello device.

  If you encounter network problems, and then add the printer via the IP protocol.

• diskette drive 0 seek failure. If I hit f1 continue, then every thing works normally. Looks like it's looking for an active drive that does not exist

  diskette drive 0 seek failure. If I hit f1 continue, then every thing works normally. Looks like it's looking for an active drive that does not exist

  This message comes to the BIOS screen that appears before Windows starts?  If so, go to the BIOS Setup and disable the floppy drive.

• error 1075 the dependency service does not exist or has been marked for removing windows xp

  The DHCP Client has stopped, but it is configured to start automatically.  When I try to reboot, I get the following message: error 1075 the dependency service does not exist or has been marked for deletion.  I need help to solve this problem.  Because of this problem, I can not connect to the internet.  My connection continues to try to acquire a network address and I lost my IP address.  I need help to fix this error on my Windows XP machine.  Thank you!

  See if this article solves your problem:

  "Error message when you start the DHCP Client service on a Windows XP-based computer:"error 1075.
    <>http://support.Microsoft.com/kb/915162 >

  HTH,
  JW

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• [SOLVED] Backup Windows 7 gives an error message 'file ignored' for a subfolder that does not exist in Documents

  I am running with "Backup and Restore" backups in Windows 7 Professional and constantly get this error in the logs:

  Backup has encountered a problem during the practical C:\Users\Tim\Documents\Blender file backup. Error: (the system cannot find the specified file. (0 x 80070002))
  "Practical Blender" is a folder I previously removed documents and backup should not be looking for it. I tried to remove the job from the scheduled backup with Windows Task Scheduler and create and execute a new backup job, but the problem goes away. It is only this specific file gives me this problem. I deleted the other folders of Documents before and since it was started without any problem of backup.

  Is it possible that I can stop backup to find this file that does not exist?

  What happens when you recreate this folder?

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Surface for xbox 360 "play to" option does not exist... ?

  I recently downloaded a video on my rt surface. I go to the video and have no problem, I look on the surface through the app. The problem is that when I try to connect to the Xbox 360 and "play to" the Xbox so I can watch it on a bigger screen. Apparently you are supposed to be able to slide up from the bottom of the screen and as well as options such as the back, next, play, stop etc. There should be a button that says play for, but unfortunately this button does not exist on my tablet. Everything on it is greatly appreciated and I thank you in advance for any help I receive.

  Pat

  Hi Pataruto,

  A simple way to start streaming is through an Xbox 360 console. When you choose the device to sink to, select the Xbox 360 rather than on devices. Follow the suggestions in this article from Microsoft if you have a problem to play your photos, videos and music using game.

  Tips for solving problems with the game

  http://Windows.Microsoft.com/en-us/Windows-8/fix-problems-play-to

  You can also see this article:

  Photos of video streams and music using game

  http://Windows.Microsoft.com/en-us/Windows-8/use-play-to

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• OIC-21700: object does not exist or is marked for deletion

  version: 11.2.0.4.0

  Hello guys, I have a user that when accessing a us01.tab1 of the table becomes the "BEAK-21700: object does not exist or is marked for deletion" error.

  when its "select * of us01.tab1 ' it's getting that error."

  but he is able to access this table if he types in individual column names of the table "select < column-1 >, < column-2 >, < column-3 > us01.tab1.

  the user is also able to "select count (*) from us01.tab1.

  It's just with "select *", is having problems with. "" It has all created necessary synonyms.

  Now when I do a "select * from us01.tab1" I get the result I wanted. As far as I see it, there is nothing wrong with the table, it is in a valid state and it does not exist in the schema us01.

  Can one help me to find what I'm missing here.

  Thank you

  The problem with that was the nested tables. I have granted execute privileges on tables nested and created of synonyms for the nested tables, and it worked. Thanks for the suggestions guys.