Fast and slow when issued by app SQL query on the issue mnaually
HelloI have a more general question concerning a specific behavior of Oracle.
I update a feature of an application. The application is not responding and I finally put end. I checked Oracle if a request is long running by using the following statement:
Select s.username,s.sid,s.serial#,s.last_call_et/60 mins_running, q.sql_text from v$ session s
Join v$ sqltext_with_newlines q
On s.sql_address = q.address
When status = 'ACTIVE'.
Type <>'BACKGROUND '.
and last_call_et > 60
order of sid, serial #, q.piece
The result of the above query is:
WITH CONNECTION AS (SELECT * FROM WW_CONN C WHERE (C.FID_FROM I))
N (SELECT FID FROM WW_LINE WHERE FID_ATTR =: B1) AND C.F_CLASS_ID
FROM = 22) OR (C.FIDto IN (SELECT FID FROM WW_LINE WHERE FID_AT))
TR =: B1) AND C.F_CLASS_ID_TO = 22)) SELECT MIN (P.FID_ATTR) AS FI
CONNECTION C, WW_POINT D_FROM P WHERE (P.FID = C.FID_FROM A
C.F_CLASS_ID_FROM ND = 32 AND C.FLOW = 1) OR (P.FID = C.FID_TO
C.F_CLASS_ID_TO ND = 32 AND C.FLOW = 2)
I have another tool that shows me the connection parameter values. So I know that the value of: B1 is 5011 - the id of the feature updates. This query runs for 20 minutes and finally more time stops in front of him. The update process involves several sql statements - if it does not have the update, but is part of the process.
Here's the bit I don't understand: when I run the query in SQL Developer with value 5011: B1 it takes 0.5 seconds to return a result.
Why did the sql statement taking so long on the issue by the application, but takes less than one second when I run it manually?
I sent a dump of the data to the vendor of the application that is not able to reproduce the problem in their environment. Could someone explain to me what is happening here or give me key words for the search?
We use 11 GR 2, 64-bit.
Thank you very much
Rob
Hi Rob,
at least, you should see some differences in the statistics for the child cursor different (one for running the application must show at least a higher value for ELAPSED_TIME). I would like to use something like the following query to verify the information for the child cursors:
select sql_id
, PLAN_HASH_VALUE
, CHILD_NUMBER
, EXECUTIONS
, ELAPSED_TIME
, USER_IO_WAIT_TIME
, CONCURRENCY_WAIT_TIME
, DISK_READS
, BUFFER_GETS
, ROWS_PROCESSED
from v$sql
where sql_id = your_sql_id
Concerning
Martin
Tags: Database
Similar Questions
-
The fan frequently betwenn oscilates fast and slow
My satellite phone to old is 15 months - for the past 2 months, he developed a tendency to switch from one mode of ventilation of fast and slow in a cycle of a second. A colleague IT tried air compressed to clean any dust - this made little difference.
Is this likely to lead to failure problem? Is this a case of dissambling fan housing and more thorough cleaning? Any suggestion would be appreciated.
Thank you.Hello
It of a simply that after awhile of use of the laptop it s necessary to clean the cooling module.
During the use of the laptop fans suck up dust all the time. Usually, the dust is responsible for a bad performance of the cooling modules. -
Original title: blocking or scrolling
Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place. It scrolls upwards or downwards, when I try to open a place to file an open letter from mail, or trying to do some work. Please notify.
Hello
1 how long have you been faced with this problem?
2 don't you make changes on the computer before this problem?
3 what e-mail client or browser you use?Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Also, viruses or malware scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
Understanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
Procedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
My hard drive on my IMac has only been replaced and now when I log in Lightroom it asks the serial number. I bought LR3 years and upgraded to 4 via the web. I have original in my LR3 product code number but not the serial number for my LR4. How can I get that?
If you have purchased lr4 where registered with adobe, consult your Adobe ID account - using the same adobe id for purchase / register.
-
Single SQL query for the analysis of the date of customs declaration under the table of Stock codes
Dear all,
Please tell us a single SQL query for the below,
We have a Table of Stock as shown below,
STOCK_TABLE
ITEM_CODE
(item code)
BAT_NO
(lot no.)
TXN_CODE
(transaction code)
DOC_NO
(number)
BOE_DT
(date of the customs declaration)
I1
B1
I1
I2
I3
B70
I4
B80
I5
B90
T102
1234
JULY 2, 2015
I6
B100
We have to find the date of customs declaration (i.e. the date when the items have come under this particular table) for items that are not attached to any document (that is, who have TXN_CODE, DOC_NO and BOE_DT fields with a NULL value).
For each item in the table of actions, which is not attached to any document, the customs declaration date is calculated as follows.
- If (code section, lot number) combination is present under HISTORY_TABLE, the date of customs declaration will receive the UPDT_DT, the transaction code (TXN_CODE) is an IN or transactions (which can be analyzed from the TRANSACTIONS table).
- If (code section, lot number) combination is NOT currently at the HISTORY_TABLE (or) the transaction code respective to item - batch number combination code is an operation then customs declaration date will be the date of the document (DOC_DT) that we receive from one of the 3 tables IN_TABLE_HEAD that contains the element of that particular lot.
- If the case 1 and case 2 fails, our customs declaration date will be the last date of document (DOC_DT) that we receive from one of the 3 tables IN_TABLE_HEAD containing that particular item and the BAT_NO in expected results will be that corresponding to this document, as appropriate, to another NULL.
- If the case 1 or case 2 is successful, the value of the last field (in the output expected, shown further below) BATCH_YN will be 'Y', because it fits the lot. Otherwise it will be 'n'.
-
Vs. runtime vs. ViewObject ViewObject SQL query in the xml file.
Hello
I wonder what is the difference between query SQL in the long term, creating a view object in the duration and the creation of a display with an XML object.
I'm not trying to have the result set cached just to pick once.
My code for a creation of a view in a run-time object:
HashSet<Integer> allPersonIdThatUserHasAccessTo = new HashSet<Integer>(); AppModuleImpl am = (AppModuleImpl)ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl"); String sqlStr = "SELECT up.person_id FROM user_person up where up.user_id = " + userId; ViewObjectImpl vo = (ViewObjectImpl)am.createViewObjectFromQueryStmt("AllPeopleUserHasAccessToVo", sqlStr); vo.executeQuery(); RowSetIterator rsi = vo.createRowSetIterator(null); while (rsi.hasNext()) { Row personRow = rsi.next(); Integer personId = ((BigDecimal)personRow.getAttribute(0)).intValue(); allPersonIdThatUserHasAccessTo.add(personId); } rsi.closeRowSetIterator(); vo.remove();
When should I use SQL query, when the view object use at time of execution and time to create the view object to an xml file?
In general you should not write this code in a managed bean. Access code or in your case creating a VO belongs behind the façade in the module of the application.
You can create the original Version, but the main difference is that it takes more time. Code everything that the definition of VO created in the data model of the application module would make too and it clears directly after the query only to create the same code again the next time you call the method.
If the goal is not to keep the data, you can create the hashset class and call executeEmptyRowSet() on the VO (https://blogs.oracle.com/smuenchadf/entry/what_does_executeemptyrowset_d for details). This way you only need a VO that takes a parameter and gets you the same result in less time.
Timo
-
Dynamic SQL query in the DB adapter
Hello
I want to use the following custom SQL query in the DB adapter:
SELECT EMP_ID, EMP_NAME, EMP_LOCATION FROM EMP WHERE EMP_ID IN (#iNPUT_PARAMETER)
the problem I'm facing is that I don't know at the time of the development that EMP_ID how much will be passed to the process so that I can not use the input parameter specific number. I cannot use it IN the query within which statement I concatenate all the EMP_ID separated by comma and passed under INPUT_PARAMETER, but when running, he read the full concatenated string as a single string rather than identify them as a list of different: with comma separation. could someone help me in this case
Thank you
SunilUse the following query with two parameters. Build the string with delimiter when running and pass this string and delimiter to query... (in this example, the input value would be the same for both Delimiter1 and Delimiter2.)
Select * from EMP WHERE deptno IN (SELECT SUBSTR (STRING_TO_TOKENIZE, DECODE (LEVEL, 1, 1, INSTR (STRING_TO_TOKENIZE, SEPARATOR, 1, LEVEL-1) + 1), INSTR (STRING_TO_TOKENIZE, SEPARATOR, 1, LEVEL)-DECODE (LEVEL, 1, 1, INSTR (STRING_TO_TOKENIZE, SEPARATOR, 1, LEVEL-1) + 1)) FROM (SELECT #StringToTokenizer | #Delimiter1 AS STRING_TO_TOKENIZE, #Delimiter2 AS DELIMITER FROM DUAL) CONNECT BY INSTR (STRING_TO_TOKENIZE SEPARATOR) ((, 1, LEVEL) > 0)
Thank you
-Sreeny -
For the MONEY and to break on a column SQL query
Hello
I have a situation where the data in the table are as below
AA
BB
1
FG
1
FG
1
FG
2
SS
1
FG
I need to write a sql query that would give output like below. Basically, it must break BB of the column and the value of the sum up to what it breaks.
AA
BB
3
FG
2
SS
1
FG
Please suggest.
Thank you
Shankar
Hello
770914 wrote:
Hello
I have a situation where the data in the table are as below
AA
BB
1
FG
1
FG
1
FG
2
SS
1
FG
I need to write a sql query that would give output like below. Basically, it must break BB of the column and the value of the sum up to what it breaks.
AA
BB
3
FG
2
SS
1
FG
Please suggest.
Thank you
Shankar
Remember, there is no order integrated to the rows in a table. The table you have posted is exactly the same as:
AA bb
-- --
1 FG
1 FG
2 SS
1 FG
1 FG
and both are exactly the same as:
AA bb
-- --
2 SS
1 FG
1 FG
1 FG
1 FG
If you use words like 'first', 'previous' or 'row' when it comes to lines, then we must define what these words mean. This is usually done by making reference to a column in the table. For example, if you had a column called r_num, like this:
AA bb r_num
-- -- -----
1 FG 1
1 FG 2
1 FG 9
2 SS 10
1 FG 10.5
Then, it would be wise to say things like 'the table starts with 3 lines consecutive "FG", followed by "SS". After that there is another "FG", which is the last line in the table, WHEN TRIE BY R_NUM. If the part about "WHEN SORTED BY R_NUM" is not known, the words 'begins '. "consecutive", 'followed', 'after' and 'last' have no meaning.
If (and only if) you have somehting like r_num in your table. Then you can get the resutls you want like this:
WITH got_group_num AS
(
SELECT aa, bb, r_num
ROW_NUMBER () OVER (ORDER BY r_num)
-ROW_NUMBER () OVER (PARTITION BY bb
ORDER BY r_num
) AS group_num
FROM table_x
)
SELECT SUM (aa) AS total_aa
, bb
OF got_group_num
GROUP BY bb
group_num
ORDER OF MIN (r_num)
;
-
R12 Payables: SQL query for the list of invoices and their status of Validation
Hi all
I am looking for a SQL query that gives me the list of all invoices of AP and their Validation status.
Thank you
AnilSelect invoice_id, invoice_num, invoice_amount, invoice_currency_code, AP_INVOICES_V approval_status_lookup_code;
Prasanna-
-
SQL query for the set of data rows not values
Hello!
I use Oracle 10 g (10.2.0.1.0) and I need help to solve this difficult task. I have a huge table with more than 145000 records and I shows you only a sample of it:
ID TEAMNAME_EN DT TEAMNAME_EN HPROB AM APROB FT
324813 31/8 / 2012 DEN HAAG GRONINGEN 1.90 3.30 3.10 2
324823 31/8 / 2012 MAINZ GREUTHER FÜRTH 1.75 3.25 3.65 2
324805 31/8 / 2012 GAZELEC DIJON 1.60 3.15 4.75 1
324810 31/8 / 2012 ÖREBRO DJURGÅRDEN 2.80 3.25 2 2.05
324795 31/8 / 2012 FC KÖLN COTTBUS 1.85 3.20 3.35 2
324837 31/8 / 2012 PORTLAND WOOD COLORADO RAPIDS 2,00 3.20 2.95 1
324828 31/8 / 2012 DROGHEDA UNITED, DUNDALK 1.45 3.65 5.25 1
324827 31/8 / 2012 CORK CITY SHAMROCK ROVERS 3,30 3,80 1.70 2
324833 31/8 / 2012 BARUERI ASA 2.45 3.20 1-2.30
324798 31/8 / 2012 GENÇLERBIRLIGI ORDUSPOR'A 2.00 3,10 X 3.00
324814 31/8 / 2012 ALMERE CITY FC OSS 1,80 3,50 3,20 2
324830 31/8 / 2012 CRICIÚMA BRAGANTINO 1.25 4.35 1 8.00
324820 31/8 / 2012 VOLENDAM FC EINDHOVEN 1.80 3.25 3.45 1
324818 31/8 / 2012 MVV MAASTRICHT TELSTAR 1.40 4.00 X 5.25
324819 31/8 / 2012 DORDRECHT VEENDAM 1.80 3.25 3.45 1
324834 31/8 / 2012 CEARÁ GUARATINGUETÁ 1.40 3.85 X 5.50
If this table consists of
dates
teams (hometeam, awayteam)
numbers for homewin, shoot, awaywin probability
and the final result as 1, X, 2
What I want is a sql query that returns to me for each hometeam, awayteam and (if possible in a single line)
all documents of the hometeam which had the same number of prior probability. For example:
CEARÁ (last line), I would like to the sql to show me all the records of CEARA who had _1.40 3.85 or 5.50_ in each of the three issues of probability, BUT the problem is that I do want separate lines... I can do so far is to calculate a sum of House probability, probability of drawing, close probability for each team but the same records are calculated again in each game of probability!
This means if CEARÁ has 1.40-3.85-5.50 in the past it will return me this line only once, and not 3 times (one for each set of probability)
I hope that I've done my duty,
Thank you for your time and lights
N. SaridakisIs that what you are looking for:
select hometeam, awayteam, hw, hd, hl from (select hometeam, awayteam, ft, SUM(CASE ft WHEN '1' THEN 1 ELSE 0 END) OVER (PARTITION BY hometeam) hw, SUM(CASE ft WHEN 'X' THEN 1 ELSE 0 END) OVER (PARTITION BY hometeam) hd, SUM(CASE ft WHEN '2' THEN 1 ELSE 0 END) OVER (PARTITION BY hometeam) hl from plays) where ft is null
-
DA on updatable report items Sql query using the class
Request Express 4.2.5.00.08
10-11 g Oracle
I have a page, so it has a link/button when he clicks then modal region will appear. Modal region has a as a table (Type SQL Query (updateable report)). All work very well so far.
However, I've now added some complex things.
for example. My region is based on the query of SQL Type (editable report).
SELECT id, name of family, Traghetti, area, d_date, start_time, End_time, displacement, role of table where id =: P10_ID;
I can also add a new line of course.
My problem is, (point) Shift display based on the value of Start_Time point) and so I made sure the class for two items.
for example, Start_Time (' class = "st_tm" ') and Maj ('class to = "Shift_time" '). Start_Time is based on (LOV) and shift is off the point in the sql query, but change the Start_Time.
And now, I created the DA.
1. event: change
Selection type: jQuery Selector
jQuery Selector: .st_tm
Condition: No.
1. action: set value
Set type: Expression Javascript
The JavaScript Expression: $(this.triggeringElement) .val ();
The element affected: P10_X1 (it is a hidden item)
2. action: Plsql Code
Code: start to null; end;
Page items to submit: P10_X1
3. action: Plsql Code
Code: start
If: P10_X1 between '03' AND '11' then
: P10_X1: = 'EARLIES ';
elsif: P10_X1 then '12' and '18'
: P10_X1: = 'LATES ';
on the other
: P10_X1: = 'NIGHTS';
end if;
end;
Page items to submit: P10_X1
NOW another DA
Event: change
Article (s) P10_X1
Condition (in list)
value (HASTY, LATES, NIGHTS)
Action:
Set type: Expression Javascript
The JavaScript Expression: $(this.triggeringElement) .val ();
Affected item:
Selection type: jQuery Selector
jQuery Selector:. Shift_time
Well, I look forward all the above work well, but I'm having a problem.
If I have more than 1 lines on a modal region and if I change the Start_Time value for a row then MAJ (point) is changing but he effect on all lines.
I want, if I make the changes on the line line # 2 while only 2 # MAJ (point) must be not performed any other lines?
Help, please!
Kind regards
RI
I found the solution me thank you.
I removed all the DA mentioned above and created a new.
1. event: change
Selection type: jQuery Selector
jQuery Selector: .st_tm
Condition: No.
Scope of the event: dynamic and light on page load.
Action (Javascript code)
ROW_ID = $(this.triggeringElement).attr('id').substr (4);
If ($(this.triggeringElement). val() > = 03 &. val() $(this.triggeringElement))<= 11)="">=>
.Val ('EARLIES') $(«#f11_» + row_id);
}
ElseIf ($(this.triggeringElement). > 11 val() & $(this.triggeringElement). val())<= 18)="">=>
.Val ('LATES') $(«#f11_» + row_id);
}
ElseIf (. val() > $19 (this.triggeringElement)) {}
.Val ('NIGHTS') $(«#f11_» + row_id);
}
also created another DA because I have a disabled report items.
Event: before the page is sent.
$('_:_disabled').removeAttr ("disabled");
and finally created manual process of DML for tabular and everything works fine. (Insert, Update, and delete).
Kind regards.
-
SQL query for the region of the tree
Hello
I was wondering if someone is able to help me work on a SQL query, to format the data in the table required in a part of the tree... I've never used a tree and I'm fighting to get the right data (if possible).
The data in the table looks like this:
I want to put it in a tree, using level 1 level6 with a final layout that would look like this:
As you can see, the data are formatted in level6 down in the tree, but are filled in the table from level 1. Not all of the columns will be filled, so level2 for anyone 4 (France) is the equivalent of level in the tree like level6 to person 1 (Spain).
This is Apex 4.2.5
Oracle 11.2.0.3.0
Sample data:
CREATE TABLE employees ( employee VARCHAR2(100), level1 VARCHAR2(100), level2 VARCHAR2(100), level3 VARCHAR2(100), level4 VARCHAR2(100), level5 VARCHAR2(100), level6 VARCHAR2(100) ); INSERT INTO employees (employee, level1, level2, level3, level4, level5, level6) VALUES ('Person1','Team One','Recruitment','Human Resources','Fictituous Company','Murcia','Spain'); INSERT INTO employees (employee, level1, level2, level3, level4, level5, level6) VALUES ('Person2','Team Four','Testing','IT','Big Corporate','Hanover','Germany'); INSERT INTO employees (employee, level1, level2, level3, level4, level5, level6) VALUES ('Person3','Big Corporate','Hanover','Germany', null, null, null); INSERT INTO employees (employee, level1, level2, level3, level4, level5, level6) VALUES ('Person4','Brittany','France', null, null, null, null); INSERT INTO employees (employee, level1, level2, level3, level4, level5, level6) VALUES ('Person5','Team Three','Testing','IT','Big Corporate','Hanover','Germany'); INSERT INTO employees (employee, level1, level2, level3, level4, level5, level6) VALUES ('Person6','Public Relations','Government Agency','Brittany','France', null, null);
Added example given.
Hello
Apex-user wrote:
Thanks Frank, this is a good example, I can work with that! Your assumptions are correct.
A question I came, however, is that I have a data segment that comes across poorly formatted so to speak... where only the lower levels (1-2, etc.) have been filled from the bottom up.
An example of this data would be:
- INSERT INTO employees (employee, level 1, 2, level3, level4, level5, level6) VALUES ('Person7', 'One Team', 'Test', null, null, null, null);
As you can see that if you rerun the select, the test team is now duplicated, both at the level of the root in the tree as it should.
You are not sure if the sql can be adjusted to account for this, or if it's too hard?
It is obviously a question of data and I am trying to solve this separately (extracted data from another system out of my control).
Thank you!
Sorry, I'm confused.
You say that my assumptions were correct. What includes supported that "If test ' occurs under 'IT' in a row, then the extent of the 'Testing' occurs, it must be under"IT "? Right after you say that assumptions are correct, you give an example where 'Testing' occurs under 'IT' to a single line, but it is not less 'IT' to another line and where is 'One Team' under 'Testing' in a line, but is 'One Team' under 'Recruitment' in another row.
When a situation like this occurs, how you cope? Whenever you have a problem, please post the exact results you want from the given sample data, and an explanation of how you get these results. If you don't know about what would be the ideal results, or if you are flexible on the exact results, then at least give an example and explain your reasons.
Maybe you want to change the got_parent of subquery like this:
WITH unpivoted_data AS
(
SELECT *.
Employees
UNPIVOT (node_name
FOR lvl (level1 AS 1
level2 AS 2
level3 AS 3
level4 AS 4
level5 AS 5
level6 AS-6
)
)
)
got_parent AS
(
SELECT c.node_name
MIN (p.node_name) AS a parent
Of unpivoted_data c
LEFT OUTER JOIN unpivoted_data p ON p.employee = c.employee
AND p.lvl = c.lvl + 1
GROUP BY c.node_name
)
SELECT LPAD (' ' ')
2 * (LEVEL - 1)
) || Node_name AS entity
OF got_parent
START WITH parent IS NULL
Parent = node_name PRIOR CONNECTION
;
In this way, if 'Test' is current 'IT' in one line, but not under what in another line, whether under would consider the 'IT' request and not to be a root. If 'One Team' sudden 'Testing' in a line, but under "Recruitment" in another line, it will be (arbitrarily) consider it under "recruitment".
-
SQL Query - store the result for optimization?
Good day experts,
I'm looking for advice on a report. I did a lot of analytical functions to get the basic data that I have to do my report and its takes about 50 min for SQL finish. Now, with these data, I need to create 3 different reports and I can't use the SQL even since there are a lot of aggregation (example would be product group in one case and by customer in 2nd). For each of these different group garages I need another report.
So how to create 3 reports of 1 SQL query without running the query 3 times?
First thing that comes to mind is to store the result set in a fictitious table, and then query the table since I get the basic data are about 300 lines and then perform different garages group.
Best regards
Igor
So how to create 3 reports of 1 SQL query without running the query 3 times?
You already know the obvious answer - store data 'somewhere '.
If any 'somewhere' depends on your needs and you have not provided ALL the.
MV - if the query is always the same, you might use a MV and make a complete refresh when you want that new data. The data are permanent and can be queried by other sessions, but the query that accesses the data is frozen in the definition of MV.
GTT (global temporary table) - If a NEW charge of data AND three reports will be ALWAYS executed by a single session and then data are no longer necessary so a TWG may work. The application that loads the TWG can be different for each race, but the data won't be available for a single session and ONLY for the duration of this session. So if something goes wrong and the session ends the data are missing.
First thing that comes to mind is to store the result set in a fictitious table, and then query the table since I get the basic data are about 300 lines and then perform different garages group.
Which is commonly called a "table of REPORT-READY." Those that are useful when data must be permanent and available for multiple sessions/users. Generally, there is a batch (for example the package procedure) that periodically refreshes / updates the data during a window of failure. Or the table can have a column (for example AS_OF) that allows it to contain multiple data sets and the update process let alone the existing data and creates a new set of data.
If your database is about 300 lines you can consider a table report and even use it to contain multiple data sets. Then, the reports can be written to query the data by using a value AS_OF that wraps and returns the appropriate data. You don't need a window of failure since the oldest data are still available (but can be removed when you no longer need.
If you need a set of data, you can use a partitioned table work (with only one partition) to collect the new set of data, then a SWAP PARTITION to 'swap' in the new data. Only, this "Exchange" takes a fraction of a second and avoids a window of failure. Once the swap done no matter what user query will get new data.
-
SQL query for the mapping of a set of prizes to a group of classrooms
Hi all
I use Oracle database 11g Release 2.
I have the following data set:
Classrooms
ClassId ClassName ability group
------ ---------------------------------------------- -------------- -----------
Babbage/software Engg Lab 1 24 1
Basement 2 - block PG 63 1
3 1 56 1 class
Class 4 1 24 10
Class 5 1 24 11
Class 6 1 35 12
7 13 42 1 class
8 14 42 1 class
9 15 42 1 class
10 2 35 1 class
11 3 35 1 class
12 4 35 1 classroom
13 5 35 1 class
14 6 25 1 class
15 7 25 1 class
16 1 24 8 class
17 9 24 1 class
18 control Sys Lab 1 24
19 dig & Embd Sys Lab 20 1
20 PSD & Comm 20 1 Lab
21 electromechanical system Lab 28 1
Farabi 22/Web Tech Lab 1 36
23 gen purpose Lab 40 1
Shirazi/24dB Tech Lab 1 36
ADV 25 elect Lab 30 2
26 16 42 2 class
27 17 49 2 class
28 18 56 2 class
29 19 42 2 class
30 20 49 2 class
Class 31 21 35 3
32 22 35 3 class
33 20 3 MDA lab
DegreeBatches
BatchId BatchName force
--------------- ----------------------- --------------
1 BIT - 11 79
2 BIT - 12 28
3 BS (CS)-1 35
4 BS (CS) 78-2
5 BE (SE)-1 69
6. BE (SE) 84-2
7 BE (SE) 64-3
8 84 BYTČA-7
9 43 BYTČA-8
BEE-1 10, 112
11 151 BEE-2
BEE-3 12, 157
13 BEE-4 157
I want to map a combination of batch of degree for a class rooms group of such distance that they make full use of the maximum capacity of the class rooms within a group (ideally), or as close to this as possible. Can it be done with a SQL query?
Any response will be appreciated.
The SQL Scripts to generate the required tables and populate data is less to:
CREATE TABLE classrooms (ClassId NUMBER, ClassName VARCHAR2 (50), capacity NUMBER, group NUMBER);
INSERT INTO the classrooms of the VALUES (1, "Babbage/software Engg Lab', 24, 1");
INSERT INTO the classrooms of the VALUES (2, 'basement - PG block', 63, 1);
INSERT INTO the classrooms of the VALUES (3, '1 class room', 56, 1);
INSERT INTO the classrooms of the VALUES (4, '10 class room', 24, 1);
INSERT INTO the classrooms of the VALUES (5, '11 class room', 24, 1);
INSERT INTO the classrooms of the VALUES (6, 'class room 12', 35, 1);
INSERT INTO the classrooms of the VALUES (7, 'class room 13', 42, 1);
INSERT INTO the classrooms of the VALUES (8, 'class room 14', 42, 1);
INSERT INTO the classrooms of the VALUES (9, '15 'class, 42, 1);
INSERT INTO the classrooms of the VALUES (10, 'class 2', 35, 1);
INSERT INTO the classrooms of the VALUES (11, 'class room 3', 35, 1);
INSERT INTO the classrooms of the VALUES (12, 'class room 4', 35, 1);
INSERT INTO the classrooms of the VALUES (13, 'class room 5', 35, 1);
INSERT INTO the classrooms of the VALUES (14, 'class room 6', 25, 1);
INSERT INTO the classrooms of the VALUES (15, '7 class room', 25, 1);
INSERT INTO the classrooms of the VALUES (16, 'class Room 8', 24, 1);
INSERT INTO the classrooms of the VALUES (17, 'class room 9', 24, 1);
INSERT INTO the classrooms of the VALUES (18, 'Control Sys Lab', 24, 1);
INSERT INTO the classrooms of the VALUES (19, 'Dig & Embd Sys Lab', 20, 1);
INSERT INTO the classrooms of the VALUES (20, 'DSP & Comm Lab', 20, 1);
INSERT INTO the classrooms of the VALUES (21, 'system ELECTROMECHANICAL Lab', 28, 1);
INSERT INTO the classrooms of the VALUES (22, ' Farabi/Web Tech Lab', 36, 1);
INSERT INTO the classrooms of the VALUES (23, 'Gen purpose Lab', 40, 1);
INSERT INTO the classrooms of the VALUES (24, ' Shirazi/DB Tech Lab', 36, 1);
INSERT INTO the classrooms of the VALUES (25, 'Elected Adv Lab', 30, 2);
INSERT INTO the classrooms of the VALUES (26, 'class room 16', 42, 2);
INSERT INTO the classrooms of the VALUES (27, 'class room 17', 49, 2);
INSERT INTO the classrooms of the VALUES (28, '18 'class, 56, 2);
INSERT INTO the classrooms of the VALUES (29, '19 'class, 42, 2);
INSERT INTO the classrooms of the VALUES (30, 'class room 20', 49, 2);
INSERT INTO the classrooms of the VALUES (31, 'class room 21', 35, 3);
INSERT INTO the classrooms of the VALUES (32, 'room 22', 35, 3);
INSERT INTO the classrooms of the VALUES (33, 'MDA Lab', 20, 3);
CREATE TABLE DegreeBatches (BatchId NUMBER, BatchName VARCHAR2 (50), membership NUMBER);
INSERT INTO DegreeBatches VALUES(1,'BIT-11',79);
INSERT INTO DegreeBatches VALUES(2,'BIT-12',28);
INSERT INTO DegreeBatches VALUES (3, 'BS (CS) - 1', 35);
INSERT INTO DegreeBatches VALUES (4, 'BS (CS) - 2', 78);
INSERT INTO DegreeBatches VALUES (5,'BE (SE) - 1', 69);
INSERT INTO DegreeBatches VALUES (6,'BE (SE) - 2', 84);
INSERT INTO DegreeBatches VALUES (7,'BE (SE) - 3', 64);
INSERT INTO DegreeBatches VALUES(8,'BICSE-7',84);
INSERT INTO DegreeBatches VALUES(9,'BICSE-8',43);
INSERT INTO DegreeBatches VALUES(10,'BEE-1',112);
INSERT INTO DegreeBatches VALUES(11,'BEE-2',151);
INSERT INTO DegreeBatches VALUES(12,'BEE-3',157);
INSERT INTO DegreeBatches VALUES(13,'BEE-4',157);
Best regards
Bilal
Published by: Bilal on December 27, 2012 09:52
Published by: Bilal on December 27, 2012 10:07Bilal, thanks for the nice problem! Another possibility to double check is to write a small PL/SQL function that returns 1 if a duplicate id is found, then equate to 0: "NUMBER of RETURN of Duplicate_Token_Found (p_str_main in VARCHAR2, p_str_trial VARCHAR2). It should analyze the second string and could use p_str_main LIKE '%', | l_id | ', %' for each id. In any case, the query complete (without that) is given below:
Solution with names SQL> WITH rsf_itm (con_id, max_weight, nxt_id, lev, tot_weight, tot_profit, path, root_id, lev_1_id) AS ( 2 SELECT c.id, 3 c.max_weight, 4 i.id, 5 0, 6 i.item_weight, 7 i.item_profit, 8 ',' || i.id || ',', 9 i.id, 10 0 11 FROM items i 12 CROSS JOIN containers c 13 UNION ALL 14 SELECT r.con_id, 15 r.max_weight, 16 i.id, 17 r.lev + 1, 18 r.tot_weight + i.item_weight, 19 r.tot_profit + i.item_profit, 20 r.path || i.id || ',', 21 r.root_id, 22 CASE WHEN r.lev = 0 THEN i.id ELSE r.nxt_id END 23 FROM rsf_itm r 24 JOIN items i 25 ON i.id > r.nxt_id 26 AND r.tot_weight + i.item_weight <= r.max_weight 27 ORDER BY 1, 2 28 ) SEARCH DEPTH FIRST BY nxt_id SET line_no 29 , rsf_con (nxt_con_id, nxt_line_no, con_path, itm_path, tot_weight, tot_profit, lev) AS ( 30 SELECT con_id, 31 line_no, 32 To_Char(con_id), 33 ':' || con_id || '-' || (lev + 1) || ':' || path, 34 tot_weight, 35 tot_profit, 36 0 37 FROM rsf_itm 38 UNION ALL 39 SELECT r_i.con_id, 40 r_i.line_no, 41 r_c.con_path || ',' || r_i.con_id, 42 r_c.itm_path || ':' || r_i.con_id || '-' || (r_i.lev + 1) || ':' || r_i.path, 43 r_c.tot_weight + r_i.tot_weight, 44 r_c.tot_profit + r_i.tot_profit, 45 r_c.lev + 1 46 FROM rsf_con r_c 47 JOIN rsf_itm r_i 48 ON r_i.con_id > r_c.nxt_con_id 49 WHERE r_c.itm_path NOT LIKE '%,' || r_i.root_id || ',%' 50 AND r_c.itm_path NOT LIKE '%,' || r_i.lev_1_id || ',%' 51 AND r_c.itm_path NOT LIKE '%,' || r_i.nxt_id || ',%' 52 ) 53 , paths_ranked AS ( 54 SELECT itm_path || ':' itm_path, tot_weight, tot_profit, lev + 1 n_cons, 55 Rank () OVER (ORDER BY tot_profit DESC) rnk, 56 Row_Number () OVER (ORDER BY tot_profit DESC) sol_id 57 FROM rsf_con 58 ), best_paths AS ( 59 SELECT itm_path, tot_weight, tot_profit, n_cons, sol_id 60 FROM paths_ranked 61 WHERE rnk = 1 62 ), row_gen AS ( 63 SELECT LEVEL lev 64 FROM DUAL 65 CONNECT BY LEVEL <= (SELECT Count(*) FROM items) 66 ), con_v AS ( 67 SELECT b.itm_path, r.lev con_ind, b.sol_id, b.tot_weight, b.tot_profit, 68 Substr (b.itm_path, Instr (b.itm_path, ':', 1, 2*r.lev - 1) + 1, 69 Instr (b.itm_path, ':', 1, 2*r.lev) - Instr (b.itm_path, ':', 1, 2*r.lev - 1) - 1) 70 con_nit_id, 71 Substr (b.itm_path, Instr (b.itm_path, ':', 1, 2*r.lev) + 1, 72 Instr (b.itm_path, ':', 1, 2*r.lev + 1) - Instr (b.itm_path, ':', 1, 2*r.lev) - 1) 73 itm_str 74 FROM best_paths b 75 JOIN row_gen r 76 ON r.lev <= b.n_cons 77 ), con_split AS ( 78 SELECT itm_path, con_ind, sol_id, tot_weight, tot_profit, 79 Substr (con_nit_id, 1, Instr (con_nit_id, '-', 1) - 1) con_id, 80 Substr (con_nit_id, Instr (con_nit_id, '-', 1) + 1) n_items, 81 itm_str 82 FROM con_v 83 ), itm_v AS ( 84 SELECT c.itm_path, c.con_ind, c.sol_id, c.con_id, c.tot_weight, c.tot_profit, 85 Substr (c.itm_str, Instr (c.itm_str, ',', 1, r.lev) + 1, 86 Instr (c.itm_str, ',', 1, r.lev + 1) - Instr (c.itm_str, ',', 1, r.lev) - 1) 87 itm_id 88 FROM con_split c 89 JOIN row_gen r 90 ON r.lev <= c.n_items 91 ) 92 SELECT v.sol_id, 93 v.tot_weight s_wt, v.tot_profit s_pr, c.id c_id, c.name c_name, c.max_weight m_wt, 94 Sum (i.item_weight) OVER (PARTITION BY v.sol_id, c.id) c_wt, 95 i.id i_id, i.name i_name, i.item_weight i_wt, i.item_profit i_pr 96 FROM itm_v v 97 JOIN containers c 98 ON c.id = To_Number (v.con_id) 99 JOIN items i 100 ON i.id = To_Number (v.itm_id) 101 ORDER BY sol_id, con_id, itm_id 102 / SOL_ID S_WT S_PR C_ID C_NAME M_WT C_WT I_ID I_NAME I_WT I_PR ---------- ---- ---- ----- --------------- ---- ---- ----- ---------- ---- ---- 1 255 255 1 SEECS UG Block 100 100 1 BIT-10 35 35 2 BIT-11 40 40 6 BICSE-7 25 25 2 IAEC Building 70 70 4 BSCS-3 40 40 7 BESE-3 30 30 3 RIMMS Building 90 85 3 BSCS-2 35 35 5 BEE-4 50 50 2 255 255 1 SEECS UG Block 100 95 4 BSCS-3 40 40 6 BICSE-7 25 25 7 BESE-3 30 30 2 IAEC Building 70 70 1 BIT-10 35 35 3 BSCS-2 35 35 3 RIMMS Building 90 90 2 BIT-11 40 40 5 BEE-4 50 50 3 255 255 1 SEECS UG Block 100 100 3 BSCS-2 35 35 4 BSCS-3 40 40 6 BICSE-7 25 25 2 IAEC Building 70 65 1 BIT-10 35 35 7 BESE-3 30 30 3 RIMMS Building 90 90 2 BIT-11 40 40 5 BEE-4 50 50 4 255 255 1 SEECS UG Block 100 100 3 BSCS-2 35 35 4 BSCS-3 40 40 6 BICSE-7 25 25 2 IAEC Building 70 70 2 BIT-11 40 40 7 BESE-3 30 30 3 RIMMS Building 90 85 1 BIT-10 35 35 5 BEE-4 50 50 5 255 255 1 SEECS UG Block 100 95 2 BIT-11 40 40 6 BICSE-7 25 25 7 BESE-3 30 30 2 IAEC Building 70 70 1 BIT-10 35 35 3 BSCS-2 35 35 3 RIMMS Building 90 90 4 BSCS-3 40 40 5 BEE-4 50 50 6 255 255 1 SEECS UG Block 100 100 2 BIT-11 40 40 3 BSCS-2 35 35 6 BICSE-7 25 25 2 IAEC Building 70 65 1 BIT-10 35 35 7 BESE-3 30 30 3 RIMMS Building 90 90 4 BSCS-3 40 40 5 BEE-4 50 50 7 255 255 1 SEECS UG Block 100 100 2 BIT-11 40 40 3 BSCS-2 35 35 6 BICSE-7 25 25 2 IAEC Building 70 70 4 BSCS-3 40 40 7 BESE-3 30 30 3 RIMMS Building 90 85 1 BIT-10 35 35 5 BEE-4 50 50 8 255 255 1 SEECS UG Block 100 100 1 BIT-10 35 35 4 BSCS-3 40 40 6 BICSE-7 25 25 2 IAEC Building 70 70 2 BIT-11 40 40 7 BESE-3 30 30 3 RIMMS Building 90 85 3 BSCS-2 35 35 5 BEE-4 50 50 9 255 255 1 SEECS UG Block 100 100 1 BIT-10 35 35 4 BSCS-3 40 40 6 BICSE-7 25 25 2 IAEC Building 70 65 3 BSCS-2 35 35 7 BESE-3 30 30 3 RIMMS Building 90 90 2 BIT-11 40 40 5 BEE-4 50 50 10 255 255 1 SEECS UG Block 100 100 1 BIT-10 35 35 3 BSCS-2 35 35 7 BESE-3 30 30 2 IAEC Building 70 65 2 BIT-11 40 40 6 BICSE-7 25 25 3 RIMMS Building 90 90 4 BSCS-3 40 40 5 BEE-4 50 50 11 255 255 1 SEECS UG Block 100 100 1 BIT-10 35 35 3 BSCS-2 35 35 7 BESE-3 30 30 2 IAEC Building 70 65 4 BSCS-3 40 40 6 BICSE-7 25 25 3 RIMMS Building 90 90 2 BIT-11 40 40 5 BEE-4 50 50 12 255 255 1 SEECS UG Block 100 95 1 BIT-10 35 35 3 BSCS-2 35 35 6 BICSE-7 25 25 2 IAEC Building 70 70 2 BIT-11 40 40 7 BESE-3 30 30 3 RIMMS Building 90 90 4 BSCS-3 40 40 5 BEE-4 50 50 13 255 255 1 SEECS UG Block 100 95 1 BIT-10 35 35 3 BSCS-2 35 35 6 BICSE-7 25 25 2 IAEC Building 70 70 4 BSCS-3 40 40 7 BESE-3 30 30 3 RIMMS Building 90 90 2 BIT-11 40 40 5 BEE-4 50 50 14 255 255 1 SEECS UG Block 100 100 1 BIT-10 35 35 2 BIT-11 40 40 6 BICSE-7 25 25 2 IAEC Building 70 65 3 BSCS-2 35 35 7 BESE-3 30 30 3 RIMMS Building 90 90 4 BSCS-3 40 40 5 BEE-4 50 50 98 rows selected. Elapsed: 00:00:01.42
Published by: BrendanP on January 20, 2013 11:25
I found the need to deduplicate regular expression:AND RegExp_Instr (r_c.itm_path | r_i.path, ',(\d+),.*?,\1,') = 0)
-
Page reports there are two 2 day points of selector (a datefrom and dateto a) as well as a text field with AutoComplete element
When the page load query is called
SELECT
"COL1",.
"COL2",.
"COL3",.
the "table".
WHERE MYDATES BETWEEN: DATEFROM AND: DATETO
Which returns no records as no dates have been set.
How can I modify this search in the clause WHERE on the date element is called only when the dates are chosen, and by default, all the records are displayed.
The other related issue is when I chose a from and to date and research when I return in the view page of report after consulting other pages in the application of the apex, the form fields are always met, how can I delete the session down for these fields when the user leaves the page?
I hope that all makes sense?To_date('01.01.2100', 'dd.mm.yyyy')
will give erroneous results on 02.01.2100 :D
A solution (perhaps there's a cleaner...):
WHERE ((:DATEFROM IS NOT NULL AND mydates >= :DATEFROM) OR :DATEFROM IS NULL) AND ((:DATETO IS NOT NULL AND mydates <= :DATETO) OR :DATETO IS NULL)
You can change the message "No data found" by changing the attribute of report "when no. found data Message."
EDIT: And for the 2nd question, Alex is right, but also be aware that Firefox retains the values of form element when the page refreshes, you must change the Security page 'Form Auto Complete' to 'Disabled' attribute if you do not want to keep the form element values.
Published by: Yann39 on June 27, 2012 06:30
HISTORY_TABLE
ITEM_CODE | BAT_NO |
TXN_CODE
DOC_NO
UPDT_DT
I1
B1
T1
1234
JANUARY 3, 2015
I1
B20
T20
4567
MARCH 3, 2015
I1
B30
T30
7890
FEBRUARY 5, 2015
I2
B40
T20
1234
JANUARY 1, 2015
TRANSACTION
TXN_CODE | TXN_TYPE |
T1 | IN |
T20 |
OFF
T30
ALL THE
T50
IN
T80
IN
T90
IN
T60
ALL THE
T70
ALL THE
T40
ALL THE
IN_TABLE_HEAD_1
H1_SYS_ID (primary key) | TXN_CODE | DOC_NO |
DOC_DATE
H1ID1
T1
1234
JANUARY 1, 2015
H1ID2
T70
1234
FEBRUARY 1, 2015
IN_TABLE_ITEM_1
I1_SYS_ID |
H1_SYS_ID
(foreign key referencing H1_SYS_ID in IN_TABLE_HEAD_1)
ITEM_CODE
I1ID1
H1ID1
I1
I1ID2
H1ID1
I100
I1ID3
H1ID2
I3
IN_TABLE_BATCH_1
B1_SYS_ID | TXN_CODE DOC_NO (now in IN_TABLE_HEAD_1) | BAT_NO |
B1ID1
T1
1234
B1 / can be empty
B1ID2
T70
1234
B70
IN_TABLE_HEAD_2
H2_SYS_ID (primary key) | TXN_CODE |
DOC_NO
DOC_DATE
H2ID1
T30
4567
FEBRUARY 3, 2015
H2ID2
T60
1234
JANUARY 3, 2015
IN_TABLE_ITEM_2
I2_SYS_ID | H2_SYS_ID (foreign key referencing H2_SYS_ID in IN_TABLE_HEAD_2) | ITEM_CODE |
I2ID1 | H2ID1 |
I1
I2ID2
H2ID1
I200
I2ID3
H2ID2
I2
IN_TABLE_BATCH_2
B2_SYS_ID |
I2_SYS_ID
(foreign key referencing I2_SYS_ID in IN_TABLE_ITEM_2)
BAT_NO
B2ID1
I2ID1
B30 / null
B2ID2
I2ID2
B90
B2ID2
I2ID3
B60
IN_TABLE_HEAD_3
H3_SYS_ID (primary key) | TXN_CODE | DOC_NO | DOC_DATE |
H3ID1 |
T50
1234
JANUARY 2, 2015
H3ID2
T80
1234
JANUARY 3, 2015
H3ID3
T90
1234
JANUARY 4, 2015
H3ID4
T40
1234
AUGUST 5, 2015
IN_TABLE_ITEM_3
I3_SYS_ID |
H3_SYS_ID
(foreign key referencing H3_SYS_ID in IN_TABLE_HEAD_3)
ITEM_CODE
BAT_NO
I3ID1
H31D1
I2
B50
I3ID2
H3ID2
I4
B40
I3ID3
H3ID3
I4
I3ID4
H3ID4
I6
There is no IN_TABLE_BATCH_3
Please find below the expected results.
OUTPUT
ITEM_CODE | BAT_NO | TXN_CODE | DOC_NO |
BOE_DT
BATCH_YN
I1
B1
T1
1234
JANUARY 3, 2015
THERE
I1
B30
T30
7890
FEBRUARY 5, 2015
N
I2
B60
T60
1234
JANUARY 3, 2015
N
I3
B70
T70
1234
FEBRUARY 1, 2015
THERE
I4
T90
1234
JANUARY 4, 2015
N
I6
T40
1234
AUGUST 5, 2015
N
Controls database to create the tables above and insert the records.
CREATE TABLE stock_table()item_code VARCHAR2()80),bat_no VARCHAR2()80),txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), boe_dt DATE );
INSERT EN stock_table
VALUES ('I1', 'B1', '', '', '');
INSERT EN stock_table
VALUES ('I1', '', '', '', '');
INSERT IN stock_table
VALUES ('I2', '', '', '', '');
INSERT EN stock_table
VALUES ('I3', 'B70', '', '', '');
INSERT EN stock_table
VALUES ('I4', 'B80', '', '', '');
INSERT EN stock_table
VALUES ('I5', 'B90', 'T102', '1234', '02-JUL-2015');
INSERT EN stock_table
VALUES ('I6', 'B100', '', '', '');
SELECT *
FROM stock_table
CREATE TABLE history_table()item_code VARCHAR2()80),bat_no VARCHAR2()80),txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), updt_dt DATE );
INSERT IN history_table
VALUES ('I1', 'B1', 'T1', '1234', '03-JAN-2015');
INSERT IN history_table
VALUES ('I1', 'B20', 'T20', '4567', '03-MAR-2015');
INSERT IN history_table
VALUES ('I1', 'B30', 'T30', '7890', '05-FEB-2015');
INSERT IN history_table
VALUES ('I2', 'B40', 'T20', '1234', '01-JAN-2015');
SELECT *
FROM history_table
CREATE TABLE transaction1()txn_code VARCHAR()80),txn_type VARCHAR()80));
INSERT INTO transaction1
VALUES ('T1', 'IN');
INSERT INTO transaction1
VALUES ('T20', 'OUT');
INSERT INTO transaction1
VALUES ('T30', 'ALL');
INSERT INTO transaction1
VALUES ('T40', 'ALL');
INSERT INTO transaction1
VALUES ('T50', 'IN');
INSERT INTO transaction1
VALUES ('T60', 'ALL');
INSERT INTO transaction1
VALUES ('T70', 'ALL');
INSERT INTO transaction1
VALUES ('T80', 'IN');
INSERT INTO transaction1
VALUES ('T90', 'IN');
SELECT *
FROM transaction1
CREATE TABLE in_table_head_1()h1_sys_id VARCHAR2()80) PRIMARY KEY,txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), doc_dt DATE );
CREATE TABLE in_table_head_2()h2_sys_id VARCHAR2()80) PRIMARY KEY,txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), doc_dt DATE );
CREATE TABLE in_table_head_3()h3_sys_id VARCHAR2()80) PRIMARY KEY,txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), doc_dt DATE );
INSERT IN in_table_head_1
VALUES ('H1ID1', 'T1', '1234', '01-JAN-2015');
INSERT IN in_table_head_1
VALUES ('H1ID2', 'T70', '1234', '01-FEB-2015');
INSERT IN in_table_head_2
VALUES ('H2ID1', 'T30', '4567', '03-FEB-2015');
INSERT IN in_table_head_2
VALUES ('H2ID2', 'T60', '1234', '03-JAN-2015');
INSERT IN in_table_head_3
VALUES ('H3ID1', 'T50', '1234', '02-JAN-2015');
INSERT IN in_table_head_3
VALUES ('H3ID2', 'T80', '1234', '03-JAN-2015');
INSERT IN in_table_head_3
VALUES ('H3ID3', 'T90', '1234', '05-JAN-2015');
INSERT IN in_table_head_3
VALUES ('H3ID4', 'T40', '1234', '05-AUG-2015');
CREATE TABLE in_table_item_1()i1_sys_id VARCHAR2()80) PRIMARY KEY,
h1_sys_id VARCHAR2 (80) REFERENCES in_table_head_1()h1_sys_id),item_code VARCHAR2()80));
CREATE TABLE in_table_item_2()i2_sys_id VARCHAR2()80) PRIMARY KEY,
h2_sys_id VARCHAR2 (80) REFERENCES in_table_head_2()h2_sys_id),item_code VARCHAR2()80));
CREATE TABLE in_table_item_3(i3_sys_id VARCHAR2(80) PRIMARY KEY,
h3_sys_id VARCHAR2 (80) REFERENCES in_table_head_3()h3_sys_id),item_code VARCHAR2()80),
bat_no VARCHAR2 (80));
INSERT IN in_table_item_1
VALUES ('I1ID1', 'H1ID1', 'I1');
INSERT IN in_table_item_1
VALUES ('I1ID2', 'H1ID1', 'I100');
INSERT IN in_table_item_1
VALUES ('I1ID3', 'H1ID2', 'I3');
INSERT IN in_table_item_2
VALUES ('I2ID1', 'H2ID1', 'I1');
INSERT IN in_table_item_2
VALUES ('I2ID2', 'H2ID1', 'I200');
INSERT IN in_table_item_2
VALUES ('I2ID3', 'H2ID2', 'I2');
INSERT IN in_table_item_3
VALUES ('I3ID1', 'H3ID1', 'I2','B50');
INSERT IN in_table_item_3
VALUES ('I3ID2', 'H3ID2', 'I4','B40');
INSERT IN in_table_item_3
VALUES ('I3ID3', 'H3ID3', 'I4','');
INSERT IN in_table_item_3
VALUES ('I3ID4', 'H3ID4', 'I6','');
SELECT *
FROM in_table_item_1
SELECT *
FROM in_table_item_2
SELECT *
FROM in_table_item_3
CREATE TABLE in_table_batch_1()b1_sys_id VARCHAR2()80) PRIMARY KEY,
txn_code VARCHAR2 (80), doc_no VARCHAR2 (80), bat_no VARCHAR2 (80));
CREATE TABLE in_table_batch_2()b2_sys_id VARCHAR2()80) PRIMARY KEY,
i2_sys_id VARCHAR2 (80) REFERENCES in_table_item_2()i2_sys_id),bat_no VARCHAR2()80));
INSERT IN in_table_batch_1
VALUES ('B1ID1', 'T1', '1234', 'B1');
INSERT IN in_table_batch_1
VALUES ('B1ID2', 'T70', '1234', 'B70');
INSERT IN in_table_batch_2
VALUES ('B2ID1', 'I2ID1', 'B30');
INSERT IN in_table_batch_2
VALUES ('B2ID2', 'I2ID2', 'B90');
INSERT IN in_table_batch_2
VALUES ('B2ID3', 'I2ID3', 'B60');
Please advise a solution for the same.
Thank you and best regards,
Séverine Suresh
very forced (question subfactoring used to allow easy testing/verification - could work with these test data only)
with
case_1 as
(select s.item_code,
s.bat_no,
h.txn_code,
h.doc_no,
h.updt_dt boe_dt,
cases where s.bat_no = h.bat_no then 'Y' else ' n end batch_yn.
cases where h.txn_code is not null
and h.doc_no is not null
and h.updt_dt is not null
then 'case 1' '.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, boe_dt
of w_stock_table
where bat_no is null
or txn_code is null
or doc_no is null
or boe_dt is null
) s
left outer join
w_history_table h
On s.item_code = h.item_code
and s.bat_no = h.bat_no
and exists (select null
of w_transaction1
where txn_code = nvl (s.txn_code, h.txn_code)
and txn_type in ('IN', 'ALL')
)
),
case_2 as
(select s.item_code,
NVL (s.bat_no, h.bat_no) bat_no.
NVL (s.txn_code, h.txn_code) txn_code.
NVL (s.doc_no, h.doc_no) doc_no.
NVL (s.boe_dt, h.updt_dt) updt_dt.
cases where s.bat_no = h.bat_no then 'Y' else ' n end batch_yn.
cases where h.txn_code is not null
and h.doc_no is not null
and h.updt_dt is not null
then 'case 2'.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, boe_dt
of case_1
where refers_to is null
) s
left outer join
w_history_table h
On s.item_code = h.item_code
and exists (select null
of w_transaction1
where txn_code = nvl (s.txn_code, h.txn_code)
and txn_type in ('IN', 'ALL')
)
and not exists (select null
of case_1
where item_code = h.item_code
and bat_no = h.bat_no
and txn_code = h.txn_code
and doc_no = h.doc_no
and updt_dt = h.updt_dt
)
),
case_31 as
(select s1.item_code,
NVL (S1.bat_no, W1.bat_no) bat_no.
NVL (S1.txn_code, W1.txn_code) txn_code.
NVL (S1.doc_no, W1.doc_no) doc_no.
NVL (S1.updt_dt, W1.doc_dt) updt_dt.
cases where s1.bat_no = w1.bat_no then 'Y' else ' n end batch_yn.
cases where w1.txn_code is not null
and w1.doc_no is not null
and w1.doc_dt is not null
then "case 31'.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn, refers_to
of case_2
where refers_to is null
) s1
left outer join
(select i1.item_code, h1.txn_code, h1.doc_no, h1.doc_dt, b1.bat_no
of w_in_table_item_1 i1
inner join
w_in_table_head_1 h1
On i1.h1_sys_id = h1.h1_sys_id
inner join
w_in_table_batch_1 b1
On h1.txn_code = b1.txn_code
and h1.doc_no = b1.doc_no
) w1
On s1.item_code = w1.item_code
),
case_32 as
(select s2.item_code,
NVL (S2.bat_no, W2.bat_no) bat_no.
NVL (S2.txn_code, W2.txn_code) txn_code.
NVL (S2.doc_no, W2.doc_no) doc_no.
NVL (S2.updt_dt, W2.doc_dt) updt_dt.
cases where s2.bat_no = w2.bat_no then 'Y' else ' n end batch_yn.
cases where w2.txn_code is not null
and w2.doc_no is not null
and w2.doc_dt is not null
then "case 32'.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn, refers_to
of case_2
where refers_to is null
) s2
left outer join
(select i2.item_code, h2.txn_code, h2.doc_no, h2.doc_dt, b2.bat_no
of w_in_table_item_2 i2
inner join
w_in_table_head_2 h2
On i2.h2_sys_id = h2.h2_sys_id
inner join
w_in_table_batch_2 b2
On i2.i2_sys_id = b2.i2_sys_id
) w2
On s2.item_code = w2.item_code
),
case_33 as
(select s3.item_code,
w3.bat_no,
NVL (S3.txn_code, w3.txn_code) txn_code.
NVL (S3.doc_no, w3.doc_no) doc_no.
NVL (S3.updt_dt, w3.doc_dt) updt_dt.
cases where s3.bat_no = w3.bat_no then 'Y' else ' n end batch_yn.
cases where w3.txn_code is not null
and w3.doc_no is not null
and w3.doc_dt is not null
then "case 33'.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn, refers_to
of case_2
where refers_to is null
) s3
left outer join
(select i3.item_code, h3.txn_code, h3.doc_no, h3.doc_dt, i3.bat_no
of w_in_table_item_3 i3
inner join
w_in_table_head_3 h3
On i3.h3_sys_id = h3.h3_sys_id
) w3
On s3.item_code = w3.item_code
)
Select item_code, bat_no, txn_code, doc_no, boe_dt, batch_yn
of case_1
where refers_to is not null
Union of all the
Select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
of case_2
where refers_to is not null
Union of all the
Select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn,
ROW_NUMBER() over (partition by item_code of updt_dt desc order) rn
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
of case_31
where refers_to is not null
Union of all the
Select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
of case_32
where refers_to is not null
Union of all the
Select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
of case_33
where refers_to is not null
)
)
where rn = 1
ITEM_CODE | BAT_NO | TXN_CODE | DOC_NO | BOE_DT | BATCH_YN |
---|---|---|---|---|---|
I1 | B1 | T1 | 1234 | JANUARY 3, 2015 | THERE |
I1 | B30 | T30 | 7890 | FEBRUARY 5, 2015 | N |
I2 | B60 | T60 | 1234 | JANUARY 3, 2015 | N |
I3 | B70 | T70 | 1234 | FEBRUARY 1, 2015 | THERE |
I4 | - | T90 | 1234 | JANUARY 5, 2015 | N |
I6 | - | T40 | 1234 | AUGUST 5, 2015 | N |
Concerning
Etbin
Maybe you are looking for
-
How to limit the messages to a recent period in separate folder
I use Thunder manage may email on the server using POP 3 and use the filter to separate different email to a different in thunderbird folder for example folder and folder b. e-mail on file B not of equal importance, so how can I limit the messages to
-
Satellite S50T-B - adding RAM and swapping HDD to SSD
Hello I recently bought portable satellite S50t-B and have a few questions about the upgrade: 1. What is the recommended RAM to add (8 GB) 2. What is the DVAR to add? 3 are there instructions for adding more RAM and an SSD for my laptop? 4. I void my
-
Upgrade to Win7 from damaged Vista DVD
Here's the scenario. Vista Ult x 64 developed a problem starting after the installation of a system app would not start. Original OS DVD inserted to run the system restore I had created just before the installation application. Could not get the syst
-
Router extension antenna cable
We have the router WRT54G of Cisco in many offices in this building. This router has two antennas. These antennas are screws at the back of the router unit. The antenna is male and side router is female connector. Can you please tell me what are thes
-
access the sql server database in my widget
I just started to build widgets for blackberry in visual studio 2008 and I want to know if its possible to use data from the sql Server database server in my widget and how can I do?