Fatal error after replacing msvcrt.dll

Similar Questions

• Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

  Original title: try to put wrong question ID problem!

  Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

  I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
  #
  # Version JRE: 6.0_30 - b12
  # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
  # Problematic frame:
  # V [jvm.dll + 0x94dca]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  #

  Hi Verisetti,

  Have you installed security software after formatting windows?

  If so, you can uninstall the security software temporarily and check if you receive the access violation error.

  If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you install the security software after the trial.

  What about Windows vista product ID, you can try to validate Windows and check if it helps.

  For more information, see the following articles:

  What is the validation, and how does it work?

  Genuine Windows: Frequently asked questions

• FATAL error after Power Cycle - GVRP associated?

  Hi all

  Happy new year!

  I have a network of four 300 switches of the series of small businesses. All are running the version of the 1.3.5.58 software (latest version).

  Three of them are connected by 2 groups of LAG to the central switch that in turn connects to the router facing the internet. There are no loops in the architecture and protocols spanning tree is running. There are a total of 4 VLANS and GVRP Protocol is enabled with the four VLANS created statically on the main switch.

  Normally, everything works very good and is perfectly stable.

  However, a power outage this morning resulted in a cycle of power on two of the switches. They did not recover gracefully and kept restarting.

  I removed the ports belonging to groups LAG in the main switch (not affected by the power cycle) and then rebuilt in order to recover the connectivity and restore normal operation.

  Both of the switches which restarted several entries in their logs like this: -.

  % GVRP-F-NOSTATREG: GVRPP_checkStaticToDynamic_update: Port is not declared statically on vlan 100 * FATAL ERROR * task Reporting: BRMN. Software version: 1.3.5.58 (date October 10, 2013 time 17:15:41) 0x16adbc 0x166f28 0x6df2b0 0x48fad8 0x4903e8 0 x 490608 0x51a234 0x79dfd8 0x7b9f8c 0x7c1500 0x445d 88 0x41e04c 0x7d4c80 0x61cb68 0x1223f0 * END OF FATAL ERROR *.

  Has any seen this before? I made a mistake of 'beginner' with GVRP configuration?

  Kind regards

  Andy.

  Hi Andrew, Yes, that sounds all right. Essentially every change made to the master advertising GVRP wide affects each vlan, not one of them. So I think that restarting the switch downstream which forces to join will update properly for the master join message.

  -Tom
  Please mark replied messages useful

• CHKDSK error after replacing screen

  Hi all

  I have an old T60, I am preparing to give to my mother. To get this loan, I have replaced the screen SXGA + dead with a XGA almost nine. Everything went well, the new screen is beautiful and probably better for my mother, since there res more weak and so large icons. However, after that I turned it back on, I continued to get a message at startup saying that one of the disks should be checkd, and he then started very well.

  I try to run chkdsk two or three times, and he acted like he had to do, but after a few seconds he said "chkdsk cancelled" and started normally. I went into the BIOS and run the drive test utility, but it doesn't give me any errors or problems, it just say something like "the disk was read" after a few hours.

  If this could have something to do with the new screen? If the driver for the old screen is originally a mistake because the new screen is a different resolution?

  Thank you.

  Thank you for your response.

  I ended up reinstalling Windows. In this way, it will be a new installation without any problem. No problems so far - the installation went well, and I am just running all the updates. I'll try to run chkdsk once everything is up to date.

  I want to thank you for taking the time to answer. Best.

  Robert

• SMART hard disk error after replacing HD

  Hello!

  I SO hope that this someboidy is able to help me.

  I'm NOT a novice but I am confused.

  I replaced with the same model HD HD CQ58 provided with COMPAQ because the old HD was shot - how it happened escapes me.

  Anyhoo, after screwing a new HD I wanted to put OS on it, but I get the following error just after pressing set button / stop:

  SMART disk error

  INTELLIGENT drive control has detected an imminent failure. So no los data, please backup the content immediately and run the system diagnostics hard drive.

  Hard drive 1 (301)

  F2 System Diagnostics

  ENTER - Continues start

  For more information, please visit: www.hp.com/go/techcenter/startup

  I will return the LINK later.

  First of all, I pushed ENTER. What has emerged is:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  F2 System Diagnostics

  For more information, please visit: www.hp.com/go/techcenter/startup

  I pressed F2 and this is what happens:

  I get the diagnostics Menu.

  Version 1.6.0.0 - BIOS

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  Memory test

  Check the hard disk

  Language

  Output

  I pressed Hard Drive Test is the "Quick Check" and that is the message I get:

  INTELLIGENT control: NOT AVAILABLE

  DST short: NOT AVAILABLE

  ==============================

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  I tried the LINK, it does not exist.

  I also went in the Boot Options in the BIOS to boot from a USB and put the USB HD in the first place.

  When I restart it does not recognize a USB key. I tried Windows 8 and UBUNTU which ususally works on all the machines I've fixed so far.

  No chance whatsoever.

  As I mentioned earlier:

  I'm puzzled.

  I have no recovery CD and cannot make one because I'm not running Win8 on any of my PC.

  Thus, any suggestions?

  Help, please

  Thanks in advance

  Henry of Kai

  First of all:

  Thank you all very much for taking the time and you answer!

  And now, for what happened after I did all what has been proposed:

  Nothing.

  The message remained the same.

  Still no hard drive (even if it was new)

  Then I took a hard drive to work with Win7 on it from another machine, put it in the Compaq and... nothing.

  I tried the USB with Win8 (NTFS with Rufus) does not.

  I don't know why, I tried again, but when I used the same USB with UBUNTU Live - 14.04. on that I had taken or tried before... He recognized at startup.

  Weird hard drive wiped completely since it was not recognized by the BIOS (one with Win7 on it... data paths but I had backup ).

  So, now I'm running the faithful Tahr on the Compaq and it works fine.

  I will try to put the original Win8 on it, but the system doesn't seem like more since USB NTFS NTFS are not recongised at startup.

  Well Anyhoo, I got the machine to work.

  Would have been nice to know what was wrong with him to solve future problems, but at least I had to register in this forum

  So I could bore you guys with questions in the future.

  Take care

  Kai

• The experience of blue screen error after replacing the hard drive

  bought a new hd.   have windows 7 pro on the computer that goes blue screen in about 5 minutes after the start.

  diagnosis indicated the bad hard drive.

  I think I have an oem copy,

  key # is

  [Deleted by MaRoselle Cag]

  I was able to copy a version of windows 7 online and enter the key number?

  I have also another computer with vista dell on what does not work but the os system is fine.

  What is my best alternative for windows on this machine?

  any help appreciated

  Hello

  Thank you for reaching out again.

  We would be happy to help you. For more information on the Windows 7 download, please click on here.

  Please do not hesitate to contact us if you need assistance.

  Kind regards.

• Fatal error C6380 install on Windows 7 32-bit

  As the title suggests, HP C6380 AIO install the software on a laptop HP with Windows 7 32 bit. First, the closed disc had only driver for XP/Vista and Mac package. I helped the owner by telephone with the installation in a first time. He has inserted the disk and started installing program. Gets through extraction, spash HP install and starts actual installation by checking the system and install then real begins. Almost immediately, he gets a fatal error showing the folder Data/Local/Temp/xxxxx of user/Application as the location of the error. Through a process of checking online for the solution. Said the solution found and loaded on the desktop. Completed unsuccessful installation uninstalls and asking to reboot.

  To restart, I run the solution file. No really help. I have the printer set up on its wireless network and checked that it is there and works. The problem seems to be with the software package and the installation on Windows 7. I downloaded the package in 32-bit Windows 7 and tried to run to settle. I get the same fatal error after unpacking and checking system. Same spot, same error message.

  The user is configured as an administrator account.

  I have a right-click the software downloaded and run as administrator.

  Also checked and resolved any issue of property to the admin user.

  I tried to download and run the XP/Vista package, but it does not, claiming that it is not for Windows 7.

  I WAS able to install the new printer in the printers from Windows 7 folder. He recognized and installed the C6380. Print test page with success. All right. But we cannot use all the features and options without the bundled software. I need a solution to get this loaded software.

  Thank you

  Dave

  I found a fix for the problem so I thought I would post it here. I did go to the printers & Devices folder and do a printer installation. I leave install and search for Windows 7. After the installation is complete, I restarted the AIO software and it went flawlessly. I have now all features.

  Good luck to all.

  Dave

• C4580 printer Installation failed with fatal error 'HPSLPSVC32. DLL failed to register.

  Try to install Windows XP Pro

  Around 58%, I get the following error

  «Fatal error during installation of the Module C:\Program Files\HP\DigitalImaging\bin\HPSLPSVC32.» DLL failed to register. HRESULT - 2147467259. Personal support contactyour.

  Please go to http://www.hp.com/support fortroubleshooting of information about "Fatal Error" and "MSI.netdevicemanager01"

  I tried after downloading the last tank and reduce the software, but the result is the same. I followed the deactivation of all services (as suggested by an online solution) and was always reboot the system after unsuccessful installsI, it did not work... googled and tried all the possible solutions.

  I use of antivirus, trend micro which is disabled for this installation. I'm intending to connect wireless printer is already installed and works wirelessly with my machine running windows xp home

  Any help to solve this problem will be appreciated because I am really stuck
  Message edited by arb_uk on 09/14/2009 16:50

  Thanks a lot DexterM for getting back to me.

  I'm happy to make you and everyone (which could face the similar question) know that the problem has been resolved with the help of the HP support. It was a problem with permissions in the registry.

  HKEY_LOCAL_MACHINE-> SOFTWARE-> Microsoft-> Windows NT-> SvcHost

  Right-click on SvcHost and select "permissions".

  Administrators and users should have "full control". Restart the machine and software should install

• Fatal error: unable to load library "pdh.dll."

  When I double click on Skype icon, a dialog box appears. It says "Fatal error" at the top, and inside, it says: "cannot load library 'pdh.dll.'" "I can't Skype to open at all.

  I used Skype without problem the day before, and I did nothing for all the files or anything like that. I don't think so.

  I restarted my computer, uninstalled and reinstalled Skype and entered %APPDATA%\microsoft\windows\sendto and renamed the Skype folder, tried to open Skype, then renamed the file back again. None of this has worked.

  I did a scan for Malware, and he came clean. I am running a virus scan.
  Can someone help me?

  Try to run the tool (sfc.exe) System File Checker

  http://support.Microsoft.com/kb/929833

• HP Pavilion dv6: System recoovery after replacing the HD because of the disk hard 301 error

  I have problems with the original of my HP Pavilion dv6 PC hard drive portable. I get an alert (SMART disk error 301) every time that I reboot, but I can still load my Windows 7.

  I just bought a new hard drive (SSD SATA3), but I would like to recover my original OS using my license key.

  How can I do? Should I create a partition on the new disk (D, copy the contents of my RECOVERY disc and use Esc + F11 after reboot?) Do I need a recovery CD/DVD? In this case, can I create one of my system?

  Thanks in advance.

  Hello
  
  Drive smart error 301 indicated fall drive hard/failed hard drives
  
  If you have recovery disks, no need for product key, insert the disc after replaced by the new fair SSD & insert the recovery disks to reinstall everything, including the recovery partition.
  
  You can also order HP recovery discs
  
  You must ensure that the size of the SSD is equal to or greater than the size of the previous HARD drive to perform successfully the recovery discs recovery.
  
  If you have not created recovery disks, you can create one - http://support.hp.com/us-en/document/c01867418
  
  Back up all your personal data now first.
  
  Thank you

• DLL from the Windows API (user32.dll) causes a fatal error

  Hello
  On installation, we using a touch screen. LabView software is running in full-screen. I need to deactivage my Panel before if the screen saver is to warn the user start anyting. I use user32.dll SystemParametersInfoA and it works well, except, if I left the software. "myexe a fin a mistake and should be closed" (something like that my XP is in french).

  I have no issues in debug mode, this error happens in exe mode.

  I use LV 8.6.1. Do you have any idea why?

  Thank you

  CFiset wrote:

  Thanks, I'll take care of the details. But unfortunly, it does not.

  uint32_t SystemParametersInfoA (uint32_t SPI, uint32_t 0, uint32_t * value, False uint32_t);

  SPI = 114 = SPI_GETSCREENSAVERRUNNING

  If * value! = 0, screen saver, ON the other scresaver OFF

  Still have the fatal error of Windows.

  Thank you

  I noticed the node having a rather odd way of user32.dll on the initial load of the library call. You happen to have copied this DLL somewhere and SEO with full path to your VI?

  It is a very big NO-NO! User32.dll and several other Windows system dll weird for the system and are all bad behavioured if you try to load another copy elsewhere on the disk as the system directory. Just rename the user32.dll library only and let Windows choose the good DLL from the system directory.

  Another problem with specifying the full path to a copy of such a DLL, it of that LabVIEW you will think that you must have this built application-specific DLL and will include it in the build. However your user32.dll is almost 200% VERY incompatible to any other Windows system there, because of the Windows Service Pack version and upgrades of the correction of a bug, as well as different versions of Windows.

  Rolf Kalbermatter

• Remove the error and check the time cartridge after replacing my black cartridge in my HP 7200 printer.

  After replacing my black cartridge in my HP 7200 printer, it says remove and check right cartridge. It also says this if I put the old cartridge in. Worked well before ink has low cartridge-more

  Cartridge OT:Ink

  Hi Jim,.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Error message: remove and check ink cartridges
  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00054462&LC=en&product=391151

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Fatal error: mscorlib.dll

  When I open certain programs this error message.
  Fatal error: cannot delay load mscorlib.dll (error Win 32: 127) library
  This program may no longer work and will end now

  This error message has to do with Microsoft Framework.

  Any ideas?

  Help would be well evaluated. Thank you

  Try to uninstall / reinstall or repair facilities of the .NET Framework, you have on your system.  Select "Add / Remove Programs" in the control panel for the entries of the .NET Framework.

• Error fatal c0000022 after the installation of Windows updates.

  Original title: error fatal c0000022

  Hello

  I was running an update on my windows computer and it crashed. My computer came into repair mode, but when performing a restore of the system, he said:
  error 0xa - a patch prevents system from starting normally

  It then close and when it is restarted app updates he says:
  The fatal error C0000022 operation apply update 107860 105136.
  Any help or advice would be much appreciated.

  Hi Emily,.

  Thanks for posting your question in the Microsoft Community Forums.

  According to reports, after the Windows Update, receiving the fatal error C0000022, the computer crashed and entered into repair mode.

  It would be useful that you can answer questions to help you best.

  1 update you tried to install?

  2 have you tried to run safe modesystem restore?

  If you are unable to boot in normal mode, then refer to section and try the steps to solve the problem.

  Advanced Troubleshooting for General startup problems in Windows XP

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Note: The above link also contains measures to run the disk check. Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Error in msvcrt.dll, rename it now error c000021a.

  I had problems with the msvcrt.dll in windows XP. So I've followed the steps to rename the file but got an error (access denied) by, and now I'm in the reboot cycle, then the blue screen with the error code c000021a.

  I did a HinesbootCD but I can't seem to load.

  Help, please. (I use the laptop with Vista of this post)

  Hello

  ·        Why have you tried to rename the .dll file?

  ·        You're able to boot in safe mode?

  
  Method 1:

  I suggest to start the recovery console, rename the file and check if you're able to boot.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  If this does not work, then I suggest you follow method 2.

  Method 2:

  Follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.