Fatal error of Run-Time with function Decimate

Similar Questions

• ActiveX error message: "run-time error '429': ActiveX component can't create object" when running FSX 2004

  Hello, I hope someone can help. I use Windows 7 64-bit. on a high spec pc. When you run FS2004 (Flight Sim program) I get the error message "" run-time error '429': ActiveX component can't create object ". " That seems to relate to the flight or the CMF management computer program. This error seems to inhibit access to the CMF. I tried to load the latest ATI driver, but that makes things worse. Has anyone encountered this problem before? Hope it

  Thanks in advance

  Ianzee

  Hello Diana

  Unfortunately, none of the above worked. However, I downloaded a file recommended by Flight1 (the creators of one of the 2 games I had problems with) surprisingly, thisinstantly solved the problem it is called http://www.flight1.com/dx7vb.exe.

  Perhaps in the future someone else have this same problem with Vista 64-bit where the game, they could also try this "correction". Of course, it worked for me!

  Thank you very much for your help & trouble in front of me, it is appreciated.

  Cordially Ianzee

• Fatal error: call to a member function find() a non-object in www/index.php on line 27 /app/

  Fatal error: Call to a member function find() on a non-object in www/index.php on line 27 /app/,.

  I get this message when I try to open a Web page, is there an easy solution?

  Hello

  1 - is the question confined with any particular Web site?

  2. what web browser do you use?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try the steps from the link below.

  Can't access some Web sites in Internet Explorer: http://support.Microsoft.com/kb/967897

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  Method 2: How to troubleshoot script errors

  in Internet Explorer on Windows computers: http://support.microsoft.com/kb/308260

  Hope this information is useful.

• Error when run through the function of path to add-in with writing to the amusement of the worksheet

  Hello world

  I wondered why the error no. 7 is coming as being attached, when I run the program.

  My intention is to write (from the FIFO) data in the worksheet by using entry for measuring function. I connected 1 d table at the entrance of table 1 d of this function. I connecetd the file port add this sub VI to the controller of the file add. I couldn't connect with indicator file add. Wire broken watch by doing this.

  Can you give me a suggestion needed to overcome this error and accomplish my data record using this sub VI (write to spreadsheet.vi)?

  Required attachments are provided for your convenience.

  Thank you.

  
  

• Dial 1172 error, a run-time error of a VI in the second time in the DLL

  Hi all

  I am a beginner in labVIEW.

  I have to write a test program in labVIEW that uses a DLL created by another programmer.

  I called the DLL of my labVIEW for control of DIOs, a serial port, communicate with a slave device, a flashing task.

  During the test program, I found that the program is OK if I use it just once, however, if I want to execute coninuously using one-loop While, it failed with

  Error 1172.

  As far as I could understand, it seems that the DLL creates a log file in C:\ so that he was called for the first time, and the process does not take control of this logfile even after the closure of the DLL.

  Then when the DLL is called for the second time, it looks for the same log file to write new info, but as he was taken control by the previous process, there is an error.

  Please find the attached files.

  Hope there will be someone who can help me to point out my mistakes in my vi or suggest me a solution for this.

  Thank you and best regards

  Aung

  (Because the system does not accept the attachment of the DLL, I changed the extension to .pdf for the DLL file)

  This is the DLL file (I have lack of attachment in the post)

• An another [FATAL] [INS-30131], this time with 11.2.0.4 and AIX 7.1

  Hello guys, this is my question about INS-30131 on AIX 7.1 and Oracle DB 11.2.0.4 error

  I noticed there are a lot of mistakes like this on OTN networks, and I tried the following possible solutions:

  1. develop / tmp to 2 G;

  2. change $TMP variable, so it would point to a larger FS;

  3. change the permissions of the directory $TMP, including: 1777, one + wr and 777

  4 created under various owners, including $TMP: location: location (default), root: System (after following the installation guide) and oracle: oinstall.

  5. I've tried silent installation;

  But I still get the error. I followed the step by step installation guide. And I can write in the temporary directories when using the oracle user. I can touch, vi and cp $TMP files, I have same cp´d the installation of oracle zip files in / tmp (up to 2 G) with success.

  The software is correct, I have checksum´d files and they´re OK.

  I do not use ASM or CI.

  I download 11.2.0.2 so I can test if this is a problem of version. I´ll you inform to happen.

  Best regards

  Matt

  I managed to make it work. Hope it help other users. The error that showed the newspaper was:

  SEVERE: Installation failed [fatal] [INS-30131] Initial required for execution of the controls of the installer.

  CAUSE: Cannot access the temporary location.

  ACTION: Make sure the current user has required permissions to the temporary location.

  So I did everything I could to resolve the problem/tmp. The problem just disappeared when I made as follows:

  1. installs the installation zip files - files 1 and 2 of 7 - to a Linux machine using scp Pei (option Preserve);

  2 chmod´d 644 both files, you know, just in case.

  3. has generated the MD5 checksum for both files. There was a game;

  4 unzipped both files, Linux;

  5 return to AIX, again using scp Pei and-r (recursive), for all of the directory;

  6. connected to AIX and ran YES. Worked like a charm.

  Down the line: it is indeed a problem of permission, but not in regard to / tmp. The didn t of log files show any hint, but fixing permissions of Installer solved the problem.

  Best regards

  Matt

• I get the Extended player Fatal Error Message every time my laptop boots to the top and I have no idea why

  I have no idea where this fatal of the extended drive error message. I don't play the games on my laptop, but my wife does in his user ID. We are both this error under our separate message ID. We don't remember to delete all programs, but when I try to install Extended Player it tells me that a critical file is missing. I tried using the Microsoft Cleanup utility, but the extended player does not appear on the list. I don't know where to go from here. Can I get help please?

  Hi Justamurray,

  1. How have you tried to install the extended player?

  2. did you of recent changes on the computer?

  3. What is the version of Windows installed on the computer?

  I suggest that you check and uninstall if you have the extended player program installed on the computer using the control panel.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Note: The link above is also applicable to the operating systems Windows 7.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to solve the error message "run-time error '3170', cannot find installable ISAM"

  Hello!
  Recently I was faced with a great difficulty to install a computer simulation problem.
  "International Futures" (you can here access the IFs - http://www.ifs.du.edu/ifs/index.aspx)

  After completing all installation of a software process ' IFs, I got an error message "runtime error '3170', cannot find installable ISAM" when the execution of the simulation program installed.

  How could I solve this problem? Please give me an easy solution!

  Hello

  What operating system is installed on your computer?

  This problem occurs if the application fails to access the database, this is why I suggest you to report your query in the community International Futures. Please visit the link below to find a community that will support what ask you:

  http://www.ifsforums.du.edu/

• ORA-00600: internal error code, arguments: [17012] with function pipeline

  The package is containing a type of function and the table declaration.
  the function returns the type of the collection is in pipeline
  
  When I recompile the plu sql package I get this error
  ORA-00600: internal error code, arguments: [17012].

  Hello!

  There is a known bug 2280512. But this info is no longer valid for version 9.2 of the db... If this is the case (you have'n give your version of db) you need to pass your database to a higher version (9.2.0.8 is good enough confirmed of my practice)

  T

• overloading a DATE with time STAMP function to avoid the "too many declarations.

  CREATE OR REPLACE PACKAGE util
  AS
    FUNCTION yn (bool IN BOOLEAN)
      RETURN CHAR;
  
    FUNCTION is_same(a varchar2, b varchar2)
      RETURN BOOLEAN;
  
    FUNCTION is_same(a date, b date)
      RETURN BOOLEAN;
  
    /* Oracle's documentation says that you cannot overload subprograms
     * that have the same type family for the arguments.  But, 
     * apparently timestamp and date are in different type families,
     * even though Oracle's documentation says they are in the same one.
     * If we don't create a specific overloaded function for timestamp,
     * and for timestamp with time zone, we get "too many declarations 
     * of is_same match" when we try to call is_same for timestamps.
     */
    FUNCTION is_same(a timestamp, b timestamp)
      RETURN BOOLEAN;
  
    FUNCTION is_same(a timestamp with time zone, b timestamp with time zone)
      RETURN BOOLEAN;
  
    /* These two do indeed cause problems, although there are no errors when we compile the package.  Why no errors here? */
    FUNCTION is_same(a integer, b integer) return boolean;
  
    FUNCTION is_same(a real, b real) return boolean;
  
  END util;
  /
  
  CREATE OR REPLACE PACKAGE BODY util
  AS
    /********************************************************************************
       NAME: yn
       PURPOSE: pass in a boolean, get back a Y or N
    ********************************************************************************/
    FUNCTION yn (bool IN BOOLEAN)
      RETURN CHAR
    IS
    BEGIN
      IF bool
      THEN
        RETURN 'Y';
      END IF;
  
      RETURN 'N';
    END yn;
  
    /********************************************************************************
       NAME: is_same
       PURPOSE: pass in two values, get back a boolean indicating whether they are
                the same.  Two nulls = true with this function.
    ********************************************************************************/
    FUNCTION is_same(a in varchar2, b in varchar2)
      RETURN BOOLEAN
    IS
      bool boolean := false;
    BEGIN
      IF a IS NULL and b IS NULL THEN bool := true;
      -- explicitly set this to false if exactly one arg is null
      ELSIF a is NULL or b IS NULL then bool := false;
      ELSE bool := a = b;
      END IF;
      RETURN bool;
    END is_same;
  
    FUNCTION is_same(a in date, b in date)
      RETURN BOOLEAN
    IS
      bool boolean := false;
    BEGIN
      IF a IS NULL and b IS NULL THEN bool := true;
      -- explicitly set this to false if exactly one arg is null
      ELSIF a is NULL or b IS NULL then bool := false;
      ELSE bool := a = b;
      END IF;
      RETURN bool;
    END is_same;
    
    FUNCTION is_same(a in timestamp, b in timestamp)
      RETURN BOOLEAN
    IS
      bool boolean := false;
    BEGIN
      IF a IS NULL and b IS NULL THEN bool := true;
      -- explicitly set this to false if exactly one arg is null
      ELSIF a is NULL or b IS NULL then bool := false;
      ELSE bool := a = b;
      END IF;
      RETURN bool;
    END is_same;
  
    FUNCTION is_same(a in timestamp with time zone, b in timestamp with time zone)
      RETURN BOOLEAN
    IS
      bool boolean := false;
    BEGIN
      IF a IS NULL and b IS NULL THEN bool := true;
      -- explicitly set this to false if exactly one arg is null
      ELSIF a is NULL or b IS NULL then bool := false;
      ELSE bool := a = b;
      END IF;
      RETURN bool;
    END is_same;
  
    /* Don't bother to fully implement these two, as they'll just cause errors at run time anyway */
    FUNCTION is_same(a integer, b integer) return boolean is begin return false; end;
    FUNCTION is_same(a real, b real) return boolean is begin return false; end;
    
  END util;
  /
  
  declare
   d1 date := timestamp '2011-02-15 13:14:15';
   d2 date;
   t timestamp := timestamp '2011-02-15 13:14:15';
   t2 timestamp;
   a varchar2(10);
   n real := 1;
   n2 real;
  begin
   dbms_output.put_line('dates');
   dbms_output.put_line(util.yn(util.is_same(d2,d2) ));
   dbms_output.put_line(util.yn(util.is_same(d1,d2) ));
   dbms_output.put_line('timestamps'); -- why don't these throw exception?
   dbms_output.put_line(util.yn(util.is_same(t2,t2) ));
   dbms_output.put_line(util.yn(util.is_same(t,t2) ));
   dbms_output.put_line('varchars');
   dbms_output.put_line(util.yn(util.is_same(a,a)));
   dbms_output.put_line(util.yn(util.is_same(a,'a')));
   dbms_output.put_line('numbers');
   -- dbms_output.put_line(util.yn(util.is_same(n,n2))); -- this would throw an exception
  end;
  /

  Originally, I had just the a function with the arguments of VARCHAR2. It worked not correctly because when the dates were gone, the automatic conversion into VARCHAR2 lowered the timestamp. So, I added a 2nd function with the arguments to DATE. Then I started to get "too many declarations of is_same exist" error during the passage of time stamps. This made no sense to me, so, although documentation Oracle says you can't do this, I created a 3rd version of the function, to manage the TIMESTAMPS explicitly. Surprisingly, it works fine. But then I noticed that he did not work with TIMESTAMP with time zones. Therefore, the fourth version of the function. Docs of the Oracle say that if your arguments are of the same family, you can't create an overloaded function, but in the example above shows, it's very bad.
  
  Finally, just for grins, I created the functions of number two, one number, the other with REAL and even these are allowed - they are compiled. But then, at runtime, it fails. I'm really confused.
  
  Here's the apparently erroneous Oracle documentation on this subject: http://docs.oracle.com/cd/B12037_01/appdev.101/b10807/08_subs.htm (see overload subprogram names) and here are the different types and their families: http://docs.oracle.com/cd/E11882_01/appdev.112/e17126/predefined.htm.
  
  Published by: hot water on 9 January 2013 15:38
  
  Published by: hot water on 9 January 2013 15:46

  >
  So, I added a 2nd function with the arguments to DATE. Then I started to get "too many declarations of is_same exist" error during the passage of time stamps. It makes no sense for me
  >
  This is because when you pass a TIMESTAMP Oracle cannot determine whether to implicitly convert to VARCHAR2 and use your first function or implicitly convert to DATE and use your second function. Where the "too many declarations" error exist.
  >
  , even if said Oracle documentation you can not do, so I created a 3rd version of the function to manage the TIMESTAMPS explicitly. Surprisingly, it works fine. But then I noticed that he did not work with TIMESTAMP with time zones.
  >
  Perhaps due to another error "too many declarations? Because now, there will be THREE possible implicit conversions that might be made.
  >
  Therefore, the fourth version of the function. Docs of the Oracle say that if your arguments are of the same family, you can't create an overloaded function, but in the example above shows, it's very bad.
  >
  I think that the documentation, of the family of 'date', is wrong as you suggest. For WHOLE and REAL, the problem is that those are the ANSI data types and are really the same Oracle data type; they are more like "alias" that different data types.

  See the doc of SQL language
  >
  ANSI SQL/DS and DB2 data types

  The SQL statements that create tables and clusters allows also ANSI data types and products IBM SQL/DS and DB2 data types. Oracle recognizes the ANSI or IBM data type name that differs from the Oracle database data type name. It converts the data type for the equivalent Oracle data type, stores the Oracle data type under the name of the column data type and stores the data in the column in the data type Oracle based on the conversions listed in the following tables.

  INTEGER NUMBER

  INT

  SMALLINT
  NUMBER (38)

  FLOAT (Note b)

  DOUBLE-PRECISION (Note c)

  REAL (Note d)
  FLOAT (126)

  FLOAT (126)

  FLOAT (63)

• adcfgclone.pl error: RC-50014: Fatal: failed to run the auto configuration service

  Hi all
  
  I got following error while cloning an instance of R12 on HP UX.
  
  After having copied from source to target, I ran perl adcfgclone.pl dbTechStack.
  
  error...
  
  Start the synchronization context file system and its models with those of the database
  
  Database connection: impossible
  Support changing context OAM function: unverified
  Support OAM customization feature: unverified
  
  File system model: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
  .
  .
  .
  No download file of context and its data base models. Connection to database failed
  .
  .
  .
  [AutoConfig error report]
  The following report lists the errors autoconfig met in each
  execution phase. Errors are grouped by directory and by phase.
  The format of the report is:
  < file name > < phase > < eventually return code >
  
  [INSTANTIATE PHASE]
  AutoConfig impossible successfully to instantiate the following files:
  Directory: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/install/RSU_reeldev
  adcrdb.sh INSTE8
  
  
  Fate of automatic configuration with State 1
  
  RC-50014: Fatal: failed to run the auto configuration service
  Asked by oracle.apps.ad.clone.ApplyDBTechStack
  
  Kind regards
  Sandeep.

  Hi user;

  Please check:

  12 adcfgclone release fails with AC-00423, RC-50014 adcrdb.sh lack of filesystem [549872.1 ID]
  RC-50004: Fatal: error occurred running adcfgclone.pl dbTier RDBMS 64 bit [336875.1 ID]

  It may be useful

  Respect of
  HELIOS

• How can I get rid of the message "Run Time Error" in Windows XR home when I open my computer?

  When I opened my computer I get the error message "run time error. Your computer wants to close in an unusual way. I clicked and after it appears once again twice more, and I click it every time, he goes and I can use the OK computer.

  With the utility 'disk cleanup', & defrag, within a normal time, try

  R.clicking my computer, properties, advanced, performance, file, change

  button with selected C:, the value to "let the system manage", click on set 2 X, close, restart

  PC.

• A VB6 application does not work under Windows 7 (32 bit). Run-time error '339'.

  Hello. I have a problem you're trying to start my program I wrote long ago on VB6. When it is run, it displays an error message: "run-time error '339': component ' COMCTL32." "OCX' is not correctly registered: a file is missing or invalid. I searched "comctl32.ocx", but it doesn't seem to be anywhere in C:\Windows (including subfolders). Using this installation - first http://www.microsoft.com/en-us/download/details.aspx?id=10019 , then System File Checker do not solve the problem - the program still does not work and ' COMCTL32. OCX' is not found. What should I do?

  Start here: http://msdn.microsoft.com/en-us/vstudio/ms788708

  This link to the download for the execution time extended to http://support.microsoft.com/kb/957924

  and

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=7030

• CVI 2013 ' FATAL RUN - TIME ERROR: pointer to free memory passed to the function of library "when you access a struct of struct

  #include 
  #include 
  #include 
  
  typedef struct StringsStruct
  {
    char A[10];
    char AA[10];
  
    char B[10];
    char BB[10];
  
    char C[10];
    char CC[10];
  } StringsStructType;
  
  StringsStructType Strings = {0};
  
  char *const SelectedStrings[3] =
  {
    Strings.A,
    Strings.B,
    Strings.C
  };
  
  int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
                         LPSTR lpszCmdLine, int nCmdShow)
  {
    if (InitCVIRTE (hInstance, 0, 0) == 0)
      return -1;    /* out of memory */
  
    strcpy( SelectedStrings[1], "TEXT" );
    /*** FATAL RUN-TIME ERROR:   "main.c", line 32, col 11, thread id 0xXXXXXXXX:   Pointer to free memory passed to library function. ***/
  
    Breakpoint();
  
    return 0;
  }
  

  Any chance to get this working in 2013 CVI?

  "& Strings.A [0]" does not work either.

  Hello CVI - User!

  Thank you for reporting the issue. I filed the bug report # 423491.

  I did have a chance to get rid of the error by changing the definition of the structure, but I was able to get the program running by disabling execution checking when the fields in the structure are initialized:

  strcpy( (char*)(uintptr_t)SelectedStrings[1], "TEXT" );
  

  Or perhaps a more descriptive workaround solution:

  #define UNCHECKED(x) ((void*)(uintptr_t)(x))
  strcpy( UNCHECKED(SelectedStrings[1]), "TEXT" );
  

  Thank you

  Peter

• receive the following error code when searching for a piece of music I did several times without a music problem but have recently updated Firefax: Fatal error: Call to undefined function AmazonData() in/home/boss/public_html/mc on line 13

  I am in the page web http://www.songarea.com/ and after searching a piece of music, I get the following error message:
  "Fatal error: Call to undefined function AmazonData() in/home/boss/public_html/mc on line 13.
  I did this several times before without a problem, but have recently updated Firefox with the Skype add-on and wonder if the two things are related.

  URL of affected sites

  http://www.songarea.com/

  Hi John,.

  It is an error message from the web server providing this site. Specifically, it is something wrong with their PHP code.

  It is not browser specific and would go into another browser besides Firefox.

  You will need to contact the webmaster of this site to report this problem. A quick test does not show this problem, but you do not specify what search query, you tried:

  http://www.songarea.com/music-codes/test.html