FDM ERPI

Similar Questions

• FDM & ERPI to FDMEE - update approach/challenges?

  Hello

  We are in FDM/ERPI 11.1.2.2.300 (used for loading the data of EBS systems and files in HFM 11.1.2.2.300) and planning to upgrade (in the existing environment [upgraded on-site]) to 11.1.2.3. As we see that FDM/ERPI are integrated together as FDMEE in 11.1.2.3, we had gray on how FDMEE would work contrary to FDM/ERPI disparate large area.

  We needed contributions from veterans, or anyone who had lived the upgrade to answer subsequent queries.

  Queries:

  [1] we have come to know that the FDM and ERPI are integrated together as FDMEE in 11.1.2.3.

  [a] since we have FDM and ERPI as separate components in 11.1.2.2.300, how should set FDM and ERPI components upgraded to FDMEE? Specific measures which must be followed to approach?

  [b] are there any known issues / challenges involved in the upgrade of disparate FDM & ERPI to FDMEE?

  [c] how would work artifacts (11.1.2.2.300) ERPI in FDMEE - is there any specific migration, or any required manual adjustment after upgrade (11.1.2.3) to have artifacts of the ERPI (as the system source, time mapping, location, import formats, data load mapping etc.) running in the FDMEE?

  [d] Similarly how artifacts FDM (of 11.1.2.2.300) would work in FDMEE? Are there specific migration or manual configuration required after upgrade (11.1.2.3) having FDM artifacts (such as mapping, validation etc rules) running in FDMEE?

  [2] since only ODI 11.1.1.7 is compatible with 11.1.2.3 (from the compatibility matrix), how we improve 11.1.1.6 to 11.1.1.7 ODI? Y at - there a patch available to upgrade or should we uninstall ODI 11.1.1.6 and install 11.1.1.7 ODI?

  Any insightful answer will be helpful for us because it will help us gain clarity/confidence and comfort in the upgrade to 11.1.2.3.

  Kind regards

  Sirot

  Hello sirot

  That you upgrade 11.1.2.2.300 for EMP 11.1.2.3 (in the existing environment [upgraded on-site]), it is called application patching EMP 11.1.2.3 on EMP 11.1.2.2

  [a] when you apply the patching, FDM 11.1.2.2 gets upgraded to FDM 11.1.2.3,.

  and ERPi gets upgraded to FDMEE 11.1.2.3

  [b] I have not encountered any questions while improving the FDM

  [c] Please check epm_install.pdf for EMP 11.1.2.3 for upgradation to FDM and FDMEE task (see page 257 / 258)

  Kind regards

  -DM

• With FDM/ERPi of Oracle Data Source incremental data loads

  Hello
  
  I use ERPi 11.1.2.1. In the workspace, it is possible to set the option of the rule of the data load to be instant, or incremental. However, I use FDM/ERPi set to load data from Oracle GL in Essbase. Is it possible for me to put in place the FDM for the data to load incremental data rules charges? Could be a parameter in the source ERPi adapter?
  
  Thanks for any information you could provide.

  Yes, the source ERPi adapter there is an option for "Method of Load Data" that will allow you to define how the rule of the DL is run. By default, it is "FULL REFRESH" but can be changed.

  (A) connecting to the application via the workbench and the source system adapters
  (B) make a right click on the Source ERPI adapter and choose "options".

  You will see an option to load method and it will be the full refresh value, choose the value of the option you want in the menu drop-down and save.

• Is it possible to use FDM ERPI drill-through via Excel Add-in, V11

  Hello
  
  I use FDM ERPI 11.1.2.1 to load data from Oracle eBS GL (11.5) in Hyperion Planning 11.1.2.1.
  
  The drill-through of Hyperion Planning to Oracle eBS GL by FDM ERPI is permitted through Smartview and data forms.
  
  Do you know if it is permitted through the Excel Add-In V11?
  
  Thanks in advance for your help
  
  Fanny

  You cannot use the add-in classic spreadsheet (Excel) if that's what you are referring.

  As indicated in the other post, it works through Smart View.

  Thank you

  Todd Rebner

• Charge several months with FDM ERPI

  Hello
  
  I use FDM ERPI to load the data from the eBS planning (11.1.2.1).
  
  Probably a very basic question, but I can see in the script of 'LOAD' in the Essbase adapter it is possible to load several months at a time.
  
  But how could I do?
  
  Thanks a lot for your help
  
  Fanny

  I don't think that the ERPI-C adapter can process several points simultaneously. Instead, you can create a simple order process which is the range of periods necessary.

• How to load several books in planning using FDM ERPI?

  Hello
  
  I use FDM and ERPI 11.1.2 to load data from Oracle GL R12 to Hyperion Planning 11.1.2.
  
  In Oracle GL, I have several books: one for each accounting entities.
  
  In ERPI:
  -an import format is associated with a single entity accouting
  -a location is associated with an import format, then with a reporting entity
  -a rule of data loading is associated with a place, then with a reporting entity
  
  In FDM, when configuring the ERPI adapter, you must enter the data load rule name that you want to use.
  
  So: How to load data from several reporting entities (= books) in planning through FDM/ERPI?
  
  Thank you in advance for your help!
  
  Fanny

  Fanny,

  You have no need to fill the data rule option - load adapter. By the documentation, you can also fill the places metadata integration Option n ° 1 with load rule name. This lets you use an adapter in the application of FDM; but the pull of several great books.

  Of course, each book would be a separate location of the FDM.

  Thank you

• Load the account with FDM ERPI

  Hello
  
  Is it possible to use the reconciliation account in the Source of FDM ERPI?
  
  I don't think but want to be sure.
  
  I use Oracle eBS R12, FDM ERPI 11.1.2 and Hyperion Planning 11.1.2.
  
  I have a hierarchy of GL account:
  Level 1: account
  Level 2: back
  for example:
  Income1
  Account A
  Account B
  Years2
  Account C
  
  I would like to have a map like:
  
  Source: Income 1; Target: 1 member
  Source: Income 2; Target: Member 2
  
  Thank you in advance for your help!
  
  Fanny

  Fanny,

  You cannot configure ERPI to provide parents of the segment values. Mappings for each account will be the only way to do it. Wild cards can make this easier, but it will still be a fair amount of work.

  Kind regards
  Matt

• FDM ERPI Pierce to EBS

  Hi guys,.
  11.1.1.3 worm
  
  I am load of EBS data into Essbase using FDM and ERPI as source.
  
  On a form of planning the extraction is enabled, but extraction is of FDM. (Extraction FDM). On navigation to a page FDM, I can't see any link to BSE.
  
  I was expecting to see a drill to link back to the EBS, which I get when I load the data directly from ERPI.
  
  Is it possible to drill at EBS, if I'm loading data using ERPI\FDM? Or rear drilling stops at FDM?
  
  Any help would be appreciated to geratly.
  
  Thank you.

  Hello

  This problem should have been created in a new thread. Now, it will be unfortunately less likely to be found by others.
  The problem with you set 'WebService' into the adapter incorrectly.

  It should be the : space not your deployment ERPi

  Thank you

• FDM/ERPi 11.1.2.2 - able to load EBS translated currency?

  We are currently running Hyperion 11.1.2.1 in our Production environment. We have Hyperion loaded 11.1.2.2 in our DEV environment. When we look at data load ERPi 11.1.2.2 rules, it seems that we could learn the currency translated from Oracle EBS and not only the functional currency. This would be useful for our environment. I looked through the 11.1.2.2 online documentation and it says that ERPi can only shoot the functional currency. Is this correct? If so, what is the purpose is the currency Type field in the source data ERPi load rule filter menu?
  
  Thank you.
  
  Terri T.

  Functional currency only

• FDM 11.1.2.2 FDM 11.1.2.3 or FDMEE 11.1.2.3?

  Hi all

  I am very new to FDM.

  We plan to perform upgradation of EMP 11.1.1.3 to EMP 11.1.2.3

  We will apply the path for upgradation as epm 11.1.1.3 11.1.2.2 EMP and EMP 11.1.2.3

  our current environment is EMP 11.1.1.3 on which we

  HSS, EPMA, plannning, essbase, HFM and FDM,

  as a new for FDM, I have reservations as part FDM & ERPi

  Source = flat files & JD edwards

  Target = HFM

  for the flat file, it will be FDM

  and for jd edwards will be integrating ERPi

  I went thought this forum for FDM upgration and now I have some doubts

  [A]. how to perform upgradation of FDM of EMP epm 11.1.1.3 11.1.2.2

  [B]. after upgradation of EMP 11.1.2.2 and then applied the EMP 11.1.2.3 maintenance release.

  our application of FDM will work in EMP 11.1.2.3 he worked in the epm 11.1.1.3 or EMP 11.1.2.2?

  [C]. it will modernize of EMP EMP 123 122 as

  FDM classic 122 to FDM 123 classic?

  or classical FDM 122 to 123 FDMEE?

  [D] as our JD edward souce and HFM's target, will work in EMP 11.1.2.3 after upgradation or having to build from scratch.

  Hello

  B. your FDM application will work in EMP 11.1.2.3 after up gradation

  C. When are you going to apply corrective update on EMP 11.1.2.2.

  It will be FDM 11.1.2.2 FDM 11.1.2.3 classic classic

  to ERPi.

  It will be ERPi 11.1.2.2 to FDMEE 11.1.2.3

  Kind regards

  -DM

• ERPI holes in security

  What guarantees do I need to give my planners so that they can use the ERPI drill through? Currently, they can see the drill by button, but when they click on it they get an error saying that they have rights (this is before they drill in the book, it's just data drilling in the FDM/ERPI repository.)
  
  This is version 11.1.2.1

  Have you tried to define the role of ERPI drill by - http://docs.oracle.com/cd/E17236_01/epm.1112/hss_admin/apas15.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Write access is necessary GL_TRACK_DELTA_BALANCES?

  Hello, I'm under FDM/ERPi version 11.1.2.2 extracting data from Oracle R12.  Our Oracle R12 GL_TRACK_DELTA_BALANCES table has only read permissions.  The data seem to shoot and charge in FDM very well, but I wonder if this will create a long-term problem.  Can someone comment on why we should change to write permissions?  Thank you much for the help!

  Write access is required to allow EBS GL keep track of shipments of additional data that have been performed by ERPI. This allows only the differences between the last load for a period and a new charge for a period to be charged, rather than load the full set of data each time. If you plan to use incremental data loads then write access would be necessary.

• Assessment of HFM

  Hi guys,.
  
  I think it's a silly question, but for me it's a challenge. I am a HFM implementation resource, so I generally follow the project plan and build the application according to the needs of the customer. However, this time my boss asked me to do an evaluation for a customer who has already HFM upward and the work. I'm supposed to understand the company, the application and recommend improvements. For a technical resource like me, it is quite difficult.
  So here's my question:
  
  How would you start the assessment? What are the suggestions that you can do to a (good) job application? More calculations (I fear, it could impact the performance of the application)? Ratio analysis (this corresponds more to business)?
  
  I know that it sounds that I need to Self-Help group, but believe me... For me, it's a huge challenge!
  
  Thank you all for your suggestions.
  
  Read

  Hey read,

  Looks like you'll want to review the infrastructure (that should be easy for you), but also the design of the application. I think that the first thing you want to do is to ensure that you are meeting the right people, those who have an interest in the application and processes. If they have a good administrator, he or she may be a starting point. The next thing is to make sure that you ask the right questions. There are many, but essentially, you will need to identify the current pain points.

  Is physical or virtual infrastructure?
  Is the infrastructure up to date?
  How many environments are set up (prod/qa/dev)?
  Moves production to dev and vice versa easy?
  Is there a disaster recovery plan and has it been tested?
  The it Department is able to handle questions?
  Is there any pressing IT issues?
  Are there future initiatives which would impact HFM/tools (deployment of Office 2010)?
  End-users have a process to report issues, especially during critical moments such as fence?

  What version of the application, they are on?
  Is there a reason to update (new features, performance 64 bit)?
  What entries are there for HFM (FDM, ERPi)?
  How data flows from the source systems?
  What outputs are there and for which functional groups (who are the customers, is how the retrieved data, it respects their needs)?
  How is training and could be better?
  End users are comfortable with their process (SmartView, FR)?
  Y at - it a power user groups and systematic of calls?
  What are the existing major pain points?
  It is a slow consolidation?
  Metadata could be cleaned?
  If the design of the application today, what could be done differently?
  How custom dimensions were used?
  Is there too much data into the consolidation system?
  Pourraient added additional data (taxes, cash, by product/customer)?
  Is all high-level respected requirements?
  Eliminations and currency conversion currently work correctly?
  Are they taking advantage of the app has to offer (lists, process management, reporting, reviews, plot i / c matching, etc.)?
  All new hierarchies would be beneficial? Some could be deleted? It would be advantageous to rebuild the app and clean some things?

  I'm sure you could go on for days with these questions. In respect of the rules file that does the calculations, you'll want to just dig and understand (this is a vba file and the admin can you provide an extract or help you with it). It may or may not be means to drive some efficiency gains and reduce delays in consolidation. There are third-party tools to help with this, but take some time and walking through it all works very well.

  Good luck!

• Question about the ImportAction script

  Hello
  
  I use FDM ERPI to load data from BSE to Planning (11.1.2.1).
  
  I would like to use the script ImportAction in FDM only relevant data (delete accounts of class 1 to 5 for example).
  So I think that I have to delete the data duiring the event StartMapProcess, isn't?
  
  to join this event, I do the following test:

  If strEventName="StartMapProcess" Then
       
       'Show user a message
       RES.PlngActionType = 2
       RES.PstrActionValue = "Dans StartMapProcess " 
  
  Else
  
       'Show user a message
       RES.PlngActionType = 2
       RES.PstrActionValue = CStr(strEventName) 
       
  End If

  but nothing happens :-/
  
  could you please help me please?
  
  Thank you
  
  Fanny

  Because a series of events occurs during the import, the user messages will appear not unless you stop the import immediately after the message you want to display. You can test your code with writing a logfile instead.

• 1 source of eBS - 2 planning targets - how to divide the data?

  Hello
  
  I use FDM ERPI to load the data of the eBS in Hyperion Planning (eBS 11.5 and EMP 11.1.2.1).
  
  I have load data in planning of 2 databases (which are in the same application of planning), target adapters so 2 and two locations.
  
  The two locations have the same source and the same mapping.
  
  But some accounts must go to app1, while others must go to app2.
  
  But no information in gl on the target application.
  
  How could I do?
  
  The EPMA table or source file to see what plan enter each account is used?
  
  And when I should exclude accounts: in the import action? in the exportToDat?
  
  Thanks in advance for your halp, hoping it's clear...
  
  Fanny

  Fanny,

  If you will be cutting back, you will need to make separate FDM apps for each target card - it is the only way. FDM creates the drill by definition based on the "installation Code", as some call the default adapter. There cannot be an adapter by default, so to drill at work, it can be a card in the application.

  Until the FDM/Oracle solves this problem, you should not use multiple cards in one drill active FDM app.

  Kind regards
  Robb Salzmann