FDMEE integration possibilities

Similar Questions

• FDMEE integration with SAP ERP GL and Netsuite

  Hi team,

  Please tell us what to connect FDMEE to SAP ERP GL and Netsuite. I was able to connect to Oracle EBS system default source. I need to extract data GL of SAP ERP GL and Netsuite to FDMEE.

  I am new to setting up the connections with FDMEE. Please notify

  Concerning

  Roshi

  At the moment the SAP ERP Financials provided by Bristlecone adapter is only available for the integration of SAP

• With ESSBASE integration possibilities

  Hello

  I want to create reports using essbase, but my data are in dataware House.

  How do I take the data from the Data Warehouse and store it in essbase? What tools do I need? Should what steps I use?

  Can someone guide me in the right direction

  Concerning

  Hello

  You can load data into Essbase through ETL/ELT, flat custom SQL filegroup, writing code using the Essbase (e.g. java) API.

  I'm just curious: why do you want to create a report using Essbase as one would say that you do not use often Essbase? No real need that Essbase can do and can't your DB?

  Essbase is a completely different way of doing things, so it's not about loading data inside (hybrid vs ASO vs BSO, formulae, calc MDX instead of SQL script...).

• Indkob af nyt SAN

  Hej folkens.

  Skal vi til at skifte our gamle EMC CX300 (Dell) SAN, city og lige om der var nogle foreslag til herinde kandidater hore.

  VI har I dag 5 ESX 'er med godt 45 invited og en SQL, og bruger ca 6 dataplads pa SAN to information' and.

  Skal vi til at kore Sharepoint med approx. 2000 aktive brugère og vi regner med at bruge ca 1 TB plads til det pa SQL' in. Summa summarum, det er ikke vilde maengder plads vi skal bruge, snarere performance.

  H er so performance og mulighed for Iscsi.

  Want: Like dildo med med backupsoftware, og uddannelse integration possibilities.

  Budget: 500.000,-Vi er en uddannelses institution, sa vi plejer at fa dildo snuff.

  MVH.

  Rune Z.

  Det er Fujitsu som har kontrakten pa Netapp, men det er reelt Proact (Europe also Netapp distributor) som saelger og har - I have used sager jeg kender til fäld.

  Det undrede is so gang stodte pa Proact jeg mig to of kunne levere pa FM, men har abenbart en lokumsaftale med Fujitsu. Eller is har brugt naked Proact Fujitsus ekspertise pa udbudsomradet til at indga kontrakten.

  Ifølge kontrakten skål silver as 10% ned Paul ar 1. December, sa det er and heldigt kommer ind tidspunkt

• Integrations of data FDMEE to Hyperion Financial Management

  Hello Experts,

  
  

  I do an integration of Oracle DB with HFM tables using Open Interface adapter.

  
  

  How should implement us this in FDMEE?

  
  

  Please advice.

  
  

  Thank you
  

  You do not use import scripts (it was only an FDM option when you need to directly load information from an RDBMS instead of a file), you use the open Interface Adapter (OIA). Take a look in the FDMEE Administrator's guide because it has a section on the use of OIA. Essentially, you will need to complete the AIF_OPEN_INTERFACE table with the data in your source database tables. You can do this in a number of ways i.e. event in FDMEE script, ODI etc. See the Administrator's guide

• FDMEE with Oracle ERP integration

  Hi Experts,

  I'm new to FDMEE. I am comfortable with FDMEE, but not obvious with the system tables.

  Is it possible to integrate data from all the other modules are engaged in other than the GL tables Oracle ERP.

  I just want to know if it is possible to integrate data from the inventory module in Oracle ERP.

  Can anyone share some documents related to this issue and specify if the data of the inventory module can be integrated.

  I have done some research on the ground, but ended nowhere.

  Thank you in advance

  Then you must follow the instructions in the section Customizing ODI to load data from a custom Source to the Administrator's guide.

  To configure the topology of the ODI, I recommend creating schema dataserver/physics/logic for your EBS server and not reuse the EBS_DATA_SERVER that is used for pre-packaged EBS GL integration. Then you can reverse your view or any table you use in the ODI Interface

  To fill the IO Table you can use the open Interface adapter model: AIF_OPEN_INTERFACE

  

• EBS to the integration of FDMEE - GL data and assets

  Hi team,

  Am new to FDMEE and Oracle EBS. Trying to integrate GL and capital given to FDMEE EBS for loading applications for EMP. The Question I have is.

  I was given with ODI configured for the server of EBS data with apps username. When I create an adapter of Native for EBS and connected with the context code. In the accounting entity FDMEE Source I am able to see the accounting entities. I would like to know which table the details comes to FDMEE and how.

  Also when I create the Import Format I can see the displayed source columns in dropdown. I am totally blank on how it's getting picked up. If you can tell me where I can relate and I'm working on a part of the integration. Please help on this.

  Please advice and help on this.

  Thank you

  Roshi

  Thanks Frank! It clarified my doubt.

  I believe that I can use any technology (PL SQl / SQL scripts) to extract the data from the tables of FA and put in open Tables to Interface to use OIA.

• Integration of PeopleSoft source FDMEE

  Hi all

  We have FDMEE 11.1.2.3 and PeopleSoft as a source system. Now, we have an obligation to connect our FDMEE to PeopleSoft to extract the metadata and the data and load it into the planning. In FDMEE administration guide, it says in this version, FDMEE automatically did most of the configuration of the ODI and we have only 3 steps manual as below.

  1. configure the database server based on the Source ERP system.
  2. place the physical patterns.
  3. set up the context of ODI to Global Code

  We did it and our FDMEE - ODI connection is successful, but we are not able to see fields of table of table source FDMEE Source adapter/Source entities screens... I know with certainty, that I'm missing a few steps here. So can you please guide me wit the steps required to integrate with PeopleSoft FDMEE.

  Thank you

  Siva

  You must link the logical schema PSFT_APPS with the physical schema of your TFTP in the GLOBAL context.

  Go to ODI Studio Console, topology, open the GLOBAL context, linking physical and logical servers.

  BTW, you don't need to turn the model. Diagram logical and physical links (which should be bound by default if you did anything change it manually?) and then to initialize your source system.

• Satellite R630 - integrated webcam does not

  Hello

  I hope someone can help me.

  My built-in webcam on my Toshiba Satellite R630 spontaneously stopped working in the last two weeks.

  I tried:

  -Check if it is enabled in the BIOS and there is no option to select a webcam here.
  -Restore my laptop computer to a previous state when the camera worked. This no longer works.
  -Updated the driver for the webcam - it installs the driver but then it disappears and nothing happens.

  A few things that it might help to know:

  -In Device Manager, "imaging devices" are missing, so I can't find the driver for the webcam here.
  -J' used to get a pop-up whenever I turned on my laptop which was loading a webcam bluetooth but saying that he could not. This stopped happening; I think I turned it off in msconfig.
  -It is not a hardware problem
  -Yesterday, I had a weird time breakthrough - I downloaded an app on my phone to try to use it as a webcam through bluetooth. I had activated bluetooth on my phone and laptop. I plugged my phone into my laptop and the pop-up the camera bluetooth (see previous point) came, but this time worked without the error message. However, instead of my phone works like a webcam, the blue light came next to my integrated webcam and who has started working. I thought it was fixed then all closed and ejected my phone and webcam stopped working again. I tried to repeat this sequence, but with no joy.

  I'm really frustrated and ideas. Can anyone help?

  Hello

  If imagine device isn't listed in Device Manager, it means that the module is not found. Even if the driver is not installed, the module must be included in the BIOS as imagine device, unknown device, etc.
  But this isn't the case

  So I think there are two possibilities: the module's fault or the connection between the module and the motherboard (Controller) isn t put in place.

  As far as I know the internal webcam module is connected to the USB controller.
  If the connection drops (cable) the module will not be recognized in Device Manager

  From my point of few, it must be a nuisance material

• Cisco VCS and integration Lync2013

  Hello!

  Could you tell me please, when CISCO officially support Lync2013 - free new software for VCS - C and documentation on integration?

  The main interest is the possibility of transferring video between CISCO/MCU and Lync endpoints on the H.264 Protocol, who hails from Lync2013.

  Right now, I've got VCS - C and RTM Lync2013 X7.2. During the video call without AMGW appeal established as audio only.

  When using with Lync2010, it worked on Protocol H.263 and CIF resolution.

  Evgeniy salvation,

  We are currently investigating the possibilities to achieve interoperability between Lync 2013, VCS and video devices on the side of the VCS standards-based, it is a work in progress and at this stage, it is to early to provide any factual information on when interop will be available.

  In contrast to Lync 2010, Lync 2013 does not support H.263 for video and it so that will remove the OCS/Lync integration. I do however think that you should be able to make a two-way video between Lync 2013 and VCS-joined endpoints if you use an AMGW tried that yet?

  Thank you

  Andreas

• To spend on the possibilities of WiFi in Windows 7 Home Premium

  I have a notebook from Medion MD 98550, with Windows 7 Home premium installed. The performance was great, but then gave up my hard drive, so I got a new installed. Since then, the integrated WiFi capability is turned off and I just can't turn it on:

  -The internal wifi card seems fine as it is fully read by Windows, but a Red Cross is displayed and a message "not connected".

  -In the Net work of the adopter properties, "the device is functioning.

  -Network adopting diagonostics returns 'possibilities of WiFi are turned off.

  -Fn + F7 does nothing, the WiFi light remains also remain off.

  -My laptop has no external button for this purpose.

  -Windows Mobility Center does not provide a solution.

  -BIOS offers only 2 options: "Disable" and "like standing." Of course, my only choice to select is this one. (There is no option 'Activate')

  -A card WiFi external, if plugged into the USB port, works very well.

  Also the web built in cam, as well as the touch screen zoom function stand out too, perhaps the result of a common reason/problem.

  I'm sure that Microsoft / Microsoft Community can help you.

  Kind regards.

  Alamgir

  Hi Alamgir,

  Thanks for posting your question in the Microsoft Community Forums.

  You may encounter network or problems of Internet in Windows for several reasons. Some common problems that can cause these problems are:

  -A switch to wireless network adapter that is not enabled.

  -WEP, WPA or WPA2 key or password security issues.

  -The cables are not connected properly.

  -Corrupt or incompatible drivers.

  -Missing updates.

  -Network connection settings.

  -Hardware or software problems.

  Networks rely on complex technology, in order to diagnose the cause of a network problem can often be a difficult task. For example, if you are unable to access a Web site, you will see an error message, but the message may not necessarily very useful since it will not usually identify the exact problem. The problem may be caused by a number of problems with your computer, the web server or the network between your computer and the web server.

  Follow these methods and check if that helps.

  Method 1.

  To the question of the integrated webcam, you can try the fn + F9 key and check if that helps. In addition, you can run the hardware troubleshooter, and check the status.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  For the touch screen zoom function, you can update the display driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Convenience store network in Windows 7 provides a way for anyone diagnose and fix network problems.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Reference article.

  Why I can't find a wireless network?: http://windows.microsoft.com/en-us/windows/cant-find-wireless-network#1TC=windows-7

  Method 2.

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows. This tutorial are excluded programs about the lines of connection of network problems.

  Wired and wireless network problems: http://windows.microsoft.com/en-us/windows/network-connection-problem-help#network-problems=windows-7&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Of reference articles.

  Setting up a wireless network: http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

  Updates: frequently asked questions: http://windows.microsoft.com/en-us/windows/updates-faq#1TC=windows-7

  Response with the State of the question and we will be happy to offer you our help.

• Filtering of data entry in FDMEE EBS

  I have install a direct integration of FDMEE with EBS. I am able to load the data and all works fine now. My only question is that I need to put some filters.

  for example, when loading data for an entity/accounting entries from other entities for this entity there but I want to only load person connected to this entity only

  e, g I'm loading accounting company and there region/company/entity data 01, 02, 03, 04, but I only want to load the data for 01.

  Is it possible that I can restrict the data to 01 only. It will depend on the location/accounting so for each book, I want to only load the data from the related company.

  It is even possible with direct integration EBS or I have to use the open interface adapter.

  If anyone can help on how to do this whatever the method load is?

  Thank you

  

  There are several option you need to filter the data source to the target load. You can you map explicit... or between the mapping so you know the beach please, see the guide FDMEE for more option to go. You can filter data for each dimension.

• FDMEE vs FASTTRACK

  Hello

  
  I saw a tool for the integration of SAP with EPM (SAP Enhancing Hyperion integration|) E.M.P. Fasttrack). -We used previously? which one should one use?

  FDMEE or FASTTRACK if only SAP integration is required.

  Concerning

  Never heard before. If you want my advice to stick with FDMEE

• FDMEE - SAP bristle cone adapter (SFTP)

  Hi team,

  We are trying to integrate FDMEE with SAP using the adapter to hair-cone. Read me says that we can have the FTP or Shared folder for this. My organization won't drive Shared and FTP, they only have SFTP. Can we use SFTP Setup for this integration within ODI. Please provide your valuable feedback people.

  Kind regards

  Mouline

  Hello

  There are two points here. When we have an FTP server:

  (1) SAP download the file to the server using FTP. SAP does not support SFTP out of the box, even if the secure transfer can be configured to your SAP database.

  (2) the officer of the ODI will get the file from the FTP server using SFTP. (In fact, the KMs ODI) adapter is not configured by default with SFTP. You must set the options of LKM in case you use SSH, identity file, etc..

  All this is documented in the ODI - KMs for SAP guides.

  See you soon

• FDMEE - map target in HFM - what security?

  Hello

  Should be easy. When you create maps in ESSONNE, users can only take members target in HFM when provided as an "Application Admin".

  What security is required to allow users to view the members of the target of a HFM application, but not to be defined as a full blown Admin?

  Not practical unfortunately. Security by location is necessary.

  Turns out, you need to activate the role of "Integrations run" to the title of Shared Services, at the same time to the provision of security FDMEE and HFM.