Feature E1200

Hello!

I have a question about the function of an E1200 compared to a WRT54G. We currently have the 54G plugged on our local network, the Ethernet cable plugged into one of the Ethernet ports, no not the Internet port on the back. It gives customers wireless IP addresses according to our main DHCP LAN as if they were wired which is correct. Bad thing is, I don't know what IP address is/has been assigned to the 54G himself that it was not connected when, well before my time. Thanks to this I can not connect to it and take a look at its parameters and try to imitate what happens out there on something like an E1200.

Therin is my next questions. What could be produced on the 54G that allows it flat like a WAP browser and the E1200 does support WAP function? If this isn't the case, what models can be added to the 54G?

If any help greatly appreciated!

Hey Skagnatti,

I don't know if it is even possible to addresses on your configuration of the class b E1200.

Tags: Linksys Routers

Similar Questions

  • E1200 V2 with no 'Internet strategy' in the configuration of the integrated webmail

    I just bought a refurbished factory E1200.  The label beneath says that it is a Version 2 template.  When I bought it, it was loaded with 2.0.02 firmware but I have updated the firmware to 2.0.04

    My problem is that I try to install MAC restrictions based on the addresses through the Setup program based on the manual/web and when I click on the "Access Restrictions" tab, I have that simple "Parental control" and advanced "Internet political access."

    Is it possible that I have a mislabeled the V1?  If this is the case, how is it that I was able to update the firmware using the firmware of the V2 downloads section.

    V do! and V2 units use the same firmware, but more importantly, how to spend the integrated software while I advanced commands of "Internet access policy?

    Thank you!

    Eric

    Hello

    The E1200 V2 comes with version 2.0.02 or original 2.0.1 firmware and the two support internet access policy, unfortunately, the new firmware (2.0.04) does not support this feature and leaves you alone with parental controls.

    Your router is not listed and it is not defective, so do not change, it's just a firmware issue, I recommend you contact your country support team and ask them for a downgrade of firmware to the previous version (2.0.02).

    I hope this helps...

    Chehab

  • E1200 1 month, 2 reboots / restarts old router, 5 zero

    Twice I shot the computer on my network to find no connectivity... after waiting on the Windows XP or Windows 7 Enterprise (2 different computers) to repair only to result in "unable to set", I finally corrected the two instances by unplugging the power cord to the e1200 and re - plug.

    What is going on? A router from another company's previous wireless ran for 5 years without rebooting... radio went wobbly, but that's another story.

    Firmware 2.0.04 build 1 30 July 2012

    Essentially the Log function on the router will help you track all activities in your network. It also records the errors that may occur. Tech geeks generally use this feature to read and questions of identity through the router.

    Here is the link to guide you to configure the router manually, http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

  • Cannot use the search feature on the App Store

    Hello

    I have a problem with the search feature in the App Store. This problem only occurs when connected with my Apple ID, everything in the App Store itself works very well. Only when it comes to the search I get an error "the App Store is temporarily unavailable. Try again later. I tried all methods I found online and on Apple's site, including: restarting the unit, check the time and date, iOS is updated, various wireless as well as the 4 G network, signing in and out of the account and App Store refresh method. Unfortunately, nothing has worked so far.

    I am currently using iPhone 5s device

    iOS 10.0.2

    Same thing here.

    But if I register the App Store, the search works very well.

    There is clearly something wrong with the App Store.

  • How to activate slide it to unlock the feature in iOS 10

    Can any body guide how to go back to 'slide to unlock' feature iOS 10 as we have it available in iOS 9. (it is required without use of contact id)

    Concerning

    I have a question too, can not use the "slide to unlock".

  • new feature in the new software update

    I think my tip can be really useful.

    Is "function for emergency assistance. It consists inform his voice of the user of the iPhone to Siri, saying 'HELP SIRI' so that it doesn't become a way for pranks. Therefore, in case of emergency (flight, Gapur, rape...), the user will scream "HELP SIRI" and Siri will be directly and automatically call 911 or an emergency line, share location and record the scene of the crime by the microphone and two cameras that will be too much work (many other options can be added) without the need for opening or even touching the phone.

    I think this feature will be very useful in a phone and a breakthrough and will help police be informed of crime happening a a complete description of it. As a result, the crime will be solved, a life could be saved (especially girls will escape rape or violation).

    Thaks for considering my idea.

    It is mainly a forum for technical support to users. You can make the suggestion to Apple via: http://www.apple.com/feedback/iphone.html

  • new operating system mac Sierra would have all the features and capabilities that El Capitan?

    Hi all

    new Sierra mac OS is available for download. My current OS is El Capitan. If I install this Sierra he would have all the features and capabilities El Capitan has?

    As far as I know, they have not eliminated all the features; They added a few however; You can read about them here:

    https://www.Apple.com/MacOS/Sierra/

  • RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.

    RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.

    You can not. However, I'm not sure why you think it's a privacy or security threat. The only thing that can be accessed without unlocking the phone is the camera to take pictures. No one can access your data already on the phone.

    You can send feedback to Apple here:

    http://www.Apple.com/feedback

  • Updated my phone to iOS 10.0.2. The auto lock feature disappeared from the General settings. Where is it now?

    Updated my phone to iOS 10.0.2. The auto lock feature disappeared from the General settings. Where is it now?

    You will find the auto lock settings in settings > display and brightness.

  • Can I use the search feature to locate my ipod classic (stolen)?

    My ipod classic (I have the serial number) that I bought in 2007, was stolen from my room, Marriott Seattle Waterfront.  Can I use find it my ipod have a this old?

    N ° this feature works only with Apple iOS (iPhone, iPad and iPod touch) devices that have a direct connection to the Internet.

  • There is no feature to unlock by Apple Watch with the Mavericks

    Hello

    I've updated my Mac Mini (2013) to the Mavericks but found no line under 'Security' in 'System Preferences' which gives me the option to unlock by Apple Watch? I have re-installed the software but still nothing appears. I've updated my iCloud with the "two factor authentication" settings and still nothing...

    Can someone help me please?

    You say in your post that you have a Mac Mini in 2013, but your lower signature, color gray, says you have a Mac Mini from 2012.

    Who is this?

    In any case, the unlock feature requires any model 2013 and later Mac running the new macOS Sierra (NOT OS X 10.9 Mavericks) using a Apple Watch, running watch OS 3 with an iPhone 5 or later.

    Time for either to update hardware and software!

  • I downloaded Safari 10 and now every page that uses Java asks me to activate or not. How to avoid this new feature? I have problems to access my bank account.

    I downloaded Safari 10 and now every page that uses Java asks me to activate or not. How to avoid this new feature? I have problems to access my bank account.

    I think they mean JavaScript.

    In your Safari menu bar, click Safari > Preferences and then select the Security tab, and then select: Enable JavaScript

  • Features of macOS Sierra

    What are the features supported in the Macbook Pro purchased during the end of 2011?

    Hi praj888,

    Thank you for using communities of Apple Support. From what you have said, it seems you want to know the requirements of feature for Sierra MacOS.
    I recommend you read this article, there models Mac supported for different features.

    MacOS Sierra - technical specifications

    See you soon.

  • iPhone 5 photos app - missing features

    I've recently updated to IOS 10 and on my iPad I can search people and keywords on the photos app but on my iPhone 5 I did not either of these features so I was wondering should I put anything on or is it meant to be like that?

    Thank you

    AIdan

    Hi Aldan,

    I see that you send messages because you have noticed that the people feature is missing from your iPhone 5. It's actually expected behavior; the people feature is not available on the iPhone 5. Take a look at this Web site for more information:

    People - iPhone

    See you soon!

  • New features of useless iMessage to recipients not iPhone

    If I use the new features of iMessage such as bubbles floating across the screen, probably they didn't is visible only when the receiver uses also an iPhone and not a Samsung?

    Recipient must use iPhone with iOS10 if you want to full effect.

Maybe you are looking for