Features of the charger

My Tablet does not seem to be supported and worry, I can try to reload with bad charger.  Can anyone confirm?

5.35 VDC

2 AMPS

Here are the specifications appropriate for the loader from the factory?  Is there a part number on this charger to confirm?

Indeed, what are the specifications of the charger. Please, take a look at page 25 of the hardware maintenance manual (ch. 3, General Fund) to check that the AC charger that you use works as expected.

The Lenovo P/N for this charger is 45N0157, the management P/N 45N0158 replacement unit.

Edit: this is the first time you load the slate?  Note that the power LED lights not while charging, it worried me that too, so just leave the slate to load for a few hours before turning on.  When you turn on the slate, press the power button until the slate vibrates or you see the Lenovo logo on the screen.

Tags: ThinkPad Tablets

Similar Questions

  • When blackBerry Smartphones to plug the charger in BB it charges is more the phone; port does not connect

    I have a Blackberry 8100 model.  When I plug the charger in the Blackberry, the loading icon does not appear on the screen and the phone is not loaded.  If I wiggle the charger port of entry in the phone cable, sometimes it will connect and charge the phone.  This has happened with my first Blackberry to the point where the connection to the port is actually right out of the device, permanently attached to the cable.  At that time, the phone was under warranty and my provider sent me a replacement phone.  Now the same thing is happening again.

    The phone is no longer under warranty and my provider said I have to buy a new phone.  However, the phone and all features work correctly, I can't charge the battery because of the problem with the charger port is loose.  Any suggestions on how I can fix the connection to port or otherwise fix this?

    I got my port of loading fixed to the www.cellphonefixed.com they are based in Seattle, WA and repairs by mail for cheap across the United States.

  • Cannot use the search feature on the App Store

    Hello

    I have a problem with the search feature in the App Store. This problem only occurs when connected with my Apple ID, everything in the App Store itself works very well. Only when it comes to the search I get an error "the App Store is temporarily unavailable. Try again later. I tried all methods I found online and on Apple's site, including: restarting the unit, check the time and date, iOS is updated, various wireless as well as the 4 G network, signing in and out of the account and App Store refresh method. Unfortunately, nothing has worked so far.

    I am currently using iPhone 5s device

    iOS 10.0.2

    Same thing here.

    But if I register the App Store, the search works very well.

    There is clearly something wrong with the App Store.

  • Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

    Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

    MacBook, 2010, Mac OS X 10.6.8

    Hi Veronica Steward,.

    I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:

    If your Mac will not turn on - Apple Support

    Let us know how it goes and thanks for coming to Apple Support communities.

    See you soon.

  • It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phone. What's wrong

    Whenever I plug my charger into my iPhone more 6 seconds I get a pop that says this accessory may not be recognized and will not take a charge. It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phone. What's wrong? And why won't my charger. I also have another charger at work that the phone recognizes even plug me the charger in but that works well on a co-workers phone. Suggestions?

    Help here > power adapters using iPad with iPhone, iPad and iPod - Apple Support

  • iPhone 5 c how to fix the charge socket?

    5 c charging port my girlfriend iPhone seems to be broken.  She is waiting for the new phone to be released before you buy a new phone, so I'll try to find out how Apple would charge to replace the charging port.  Also, is this a repair they do regularly enough that they might be the part in stock for immediate relief. Any help is greatly appreciated. Thank you!

    Apple will not replace the graphics port. They will replace the entire phone.

    An AppleCare agreement + assets, it is $ 269 in the United States.

  • Yesterday, I paid $29.99 thinking I was getting Grime Fighter, as I have some dirt, but he tells me that I don't have this feature, why the audit!

    Yesterday, I paid $29.99 thinking I was getting Grime Fighter, as I have some dirt, but he tells me that I don't have this feature, why the audit! What are the characteristics of fact fees cover $29.99

    Do you mean that Avast program: https://www.avast.com/en-us/grimefighter

    We can not probably help you with that here on the Firefox support site, but Avast has a page of support here: https://www.avast.com/en-us/support#grimefighter

  • When I power on my iPhone and plug in the charger it turns on, is this normal?

    When I power on my iPhone and plug in the charger it turns on, is this normal?

    Yes, it's normal.

    If the battery power goes off and you recharge it will reboot the phone for you when it reached a stable level so that you can get phones without hovering above the device to see if it is ready.

  • How can I remove links to the latest features of the homepage of FF

    How can I remove links to the latest features of the homepage of FF. See screenshot. I want deleted url.
    Sorry screenshot has not shown the first time


  • IPhone 5 s screen does not turn off when it is plugged in to the charger.

    Hi all

    I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

    Please let me know how to solve the problem.

    Kind regards

    Manju!

    Hello there, Manjunath K P!

    Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

    If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

    Once that is done, go ahead and try to set the automatic lock again and see if it works.

    See you soon!

  • my watch is dead and does not even on the charger

    My Apple Watch is dead. Doesn't react anymore and also on the charger there is no reaction, even after several hours

    Hello

    Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

    If this does not help, then try to charge your watch for about 2.5 hours, making sure that you follow the instructions from here:

    Check your battery and load your Apple Watch - Apple Support

    After this period, if it has not already restarted automatically, remove it from the charger and:

    -Try to restart it (by pressing the side button until you see the Apple logo).

    -Then try force it restarts again.

    More information:

    If your Apple Watch does not respond or won't turn on - Apple Support

  • It doesn't damage my new ipad if I leave it on the charger for a long term I

    It damaged my new ipad if I leave it connected to the charger for extended time? As for the weeks.

    No, it will be auto load when it is full.

  • Will not wear my watch for a week... should I leave it on the charger for a week or take off for the week?

    Will not wear out my watch for a week... should I leave all week on the charger or leave it?

    Hello

    You can leave it on the charger if you wish.

    https://help.Apple.com/watch/#/apd2b717523a

  • I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

    I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

    Keep the computer plugged in whenever possible.

    If you keep the computer always connected, make sure that at least twice a month

    Run it on battery until battery charge level falls to about 40-50%.

    Please don't completely discharge the battery. Discharge the battery completely will reduce wear and tear on the battery.

    For more information:

    Section: To optimize the battery life

    http://support.Apple.com/en-us/HT204054

    Citing at the bottom of the linked article.

    "The question is often asked:" should I disconnect my laptop from the mains when not in service? Under normal circumstances it should not be necessary because as soon as the lithium-ion battery is full, a properly functioning charger will stop the load and load the pad will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe. »

    http://BatteryUniversity.com/learn/article/bu_808c_what_the_user_can_do

  • iPod touch 5 chimes only when the charge, won't turn on

    My ipod touch 5 will not turn on and everything sounds every 10 seconds when plugged into the charging cable.

    Try:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

Maybe you are looking for

  • Satellite A200: nVidia 7300 Go does not save the display settings

    I'm using the latest drivers available, but I can not even save display settings in nvidiaControl Panel. For example if I turn down the brightness and increase digital vibrance and applyThese settings, the next time that I reboot or run and release a

  • Problem of WritableGraph. How to preload data into InputData?

    Hello I was planning to do a simple editor to change the limits by drawing a curve in the control WritableGraph. To be able to define the limit that I first load data into chart and a table [Point]. Source of data in this table (which trace the loade

  • PCI-6723 at 100 kHz

    Hi all I use the NI PCI 6723 Analog Output card with SCB-68 connector housing. Specifications of the PCI-6723 tells this unique channel of sampling frequency (refresh rate) maximum is 800 Ksamp/s. I tried t0 generate sine wave 100 KHz using single ch

  • Extract a table under a table 2D

    I've beaten my head against the wall on this issue for a while now and ran out of ideas so I ask for help somehow. What I want is pretty simple: A way to take a picture 2D with the time and temperature (the temperature is a thermocouple so there is a

  • Search for the string in the string table and see the following value in the line

    Hi, I'm new I have LV and I do a Vi that read worksheet values and generates 2d channels of the same spreadsheet table. For the moment everything I need is a function that find specyfic string in this table and show the next value in a line. As: Tabl