When blackBerry Smartphones to plug the charger in BB it charges is more the phone; port does not connect

Similar Questions

• BlackBerry Smartphones middle of the space bar does not work?

  Hi all

  I used a company Blackberry issued before, but I just bought myself a new model of the curve a few days ago.

  I had a hard time typing today, and I realized that this is because the part of the space bar does not work. Specifically, if I push on the left or right edge of the space bar, I get a space. But if I press in the center of the space bar, the button clicks but 2/3 of the time that no space appears. So I have to press the button 2 or 3 times to get a space. Or I have to press the edges of the space bar.

  Is this a problem with my specific blackberry or this entire line has this problem?

  I should ask T-Mobile for a repair or replacement? I just got a few days... someone had success treats this issue before?

  Thank you all!

  Hi and welcome to the Forums!

  I've not seen all messages more precisely the space bar. It may be as simple as a dust or dirt stuck under the key.

  If it was me, I take it immediately and get a new one. It may be defective. Why pay good money for something that may have a permanent problem?

  I hope this helps!

  If this answers your question, please close the message by using the options on the key of the kudo.

  Thank you very much!

• BlackBerry Smartphones Missing calls - the phone rings do not

  Sometimes my phone acts as if it were the silent mode: a call comes in and I can see it on the screen, but it does not have a ringing sound. The very next call sounds great, even if it is the same person who called when the phone was silent. The sound settings are set to 'Normal '. The tech at the local store guys are confused.

  Any ideas why this happens?

  Thank you very much!

  I had this problem too, and the only solution was to reboot the phone and then remove the battery.  I brought back to the cell shop where I got it; they had placed the phone software updated and location of PRL, they even tried wiping the own phone electronically.

  It was an intermittent problem, so I had to constantly check to see if the ringer would work.  If the cell store eventually brought down and replaced by a new.  Now I think it works very well.  Touch wood.

  Gillis

• BB blackBerry Smartphones and now the BBM upgrade does not

  I've upgraded to the new version of BB (I think version 5?) two days ago.  Yesterday, I could not find my BBM icon.  At out the battery, etc... Didn't come back (even if it was listed in the application list).  I reinstalled via the BB App World and then had my contacts through backup.  Today, it is not letting me send BBM and if someone sends me a BBM they get an X.  Everything else seems to work very well (Im' getting emails, etc...).  I also did a soft reset (output battery) - nothing has changed.

  Anyone encountered this problem and know how to solve? Thank you.

  Sphinx wrote:

  I also did a soft reset (output battery) - nothing has changed.

  With the BlackBerry turned on, disconnect the battery for a few seconds and then reinsert the battery to restart.

  If it still does not work:.

  On your BlackBerry device, go to:

  1. options > advanced > host Routing Table > Menu > register.

  2 send your service from your carrier's BIS site books:
  Of your handheld: http://www.blackberry.com/btsc/KB15402

  Go to the Personal Email Set Up icon and sign. Then under help!, select Service books and select send service books.

  Your desktop PC: http://www.blackberry.com/btsc/KB02830
  North American carriers - scroll down to select your carrier
  Carriers worldwide - find your operator from the list

  3. with the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart. This restart, even if you have already done this, is often necessary to install the service books.

• BlackBerry Torch Smartphone 9860 all the funcation key does not

  Dear all, I have my torch 9860 and facing a serious issue that all track pad and keys, including the menu key, the escape key, call key, lock screen and volume keys keys do not work. However, its touch screen works very well and you can write words by using the keyboard. You can also scroll by using the touch pad, but when you press keypad enter the command, it does not work. Kindly help on this issue.  I also reinstalled OS 7.1 but not sucecess.

  Please note that once push the ESC key to enter secure mode the handset run in safe mode. It measn if the leak is defective then why does device to the SafeMode pressing escape key.

  Please help me solve this problem.

  I recommend reloading your operating system.  To do this, connect your phone to your PC via USB and open BlackBerry Desktop Software.  The first thing you need to do is a backup of the data.  When your phone has been recognized, click device at the top, and then click Backup.  Once the backup is complete, restore your phone by clicking on the device and then restore.  Choose the most recent retore point and load.  Because your 'back' button works for your phone Safe Mode, we know that this is not a hardware problem, in order to restore your phone should solve the problem.

  Give it a shot and keep us updated on your progress.

• Problems of blackBerry Smartphones with all the apps that need to connect to the internet, except BB browser

  OK so I had downloaded Opera mini 4.2 and iheartradio and slacker radio and they all worked perfect for 3 days and then all of a sudden, they don't work. I timed out connections and even google maps app on my phone usually connect. The only app that connects to the internet is the BB browser (the one that looks like a globe of aureole around it). There is no other applications running causing an obstruction of. 6.8 GB is open in memory, so im puzzled? Someone help me please Im racking my brain trying to figure what it would cause. The last time it worked was listening from morning to the Slacker, then went to lunch trying to get onto the opera would not connect, then I'm on the BB browser, so it does not connect with any other app HMMMMPH.

  Understood the problem, I had a few memory leaks. Here's what I did:

  It is a database file that stores information for the applications downloaded/installed. Even if deleted still stores information about them. Use of the DM to clear it.

  Go to backup/restore > advanced > bases > content store (on your Blackberry Desktop Manager)

  Choose clear database. (Content store only)

  TADAAAA! It cleared up 3MB of space on my phone and everything works OK!

• Smartphones from blackBerry Storm 2 (on Vodafone in the United Kingdom) does not connect to WiFi properly.

  I'm having a problem with my Storm 2 right now - it does not connect to the router wireless home properly.  Router is a wireless G of Belkin model.   The page "Manage the Conections" shows the connected device (green text, but - no checkmark) and the status page shows that he has an IP address assigned to it.  This is confirmed from the listing routers DHCP client.  But the WiFi icon remains Gray and I cannot get the phone to authenticate to confiure the accounts email outside the company.  Failed attempts to addresses of ping inside or outside the LAN with timeout errors.

  Can one suggest a solution to this is iiue please - even if it has replace the router!

  If it helps it is the result of the WiF self-diagnosis:

  A WiFi Diagnostics (Advanced): December 24, 2009 20:04:43

  A Wi - Fi connection
  Current profile: belkin54g
  SSID: belkin54g
  AP MAC address: 00:11:50:FF:15:20
  Security type: pre-shared Key (PSK)
  Association: success
  Authentication: success
  Local IP address: 192.168.2.11
  Signal level:-44 dBm
  Data connection speed: 54 Mbps
  Status: Acquired network
  Authentication failure reason:
  Network type: 802. 11 b / g
  Network channel: 1 pair
  Encryption: TKIP
  Group cipher: TKIP
  Gateway address: 192.168.2.1
  DHCP: success
  Primary DNS: 192.168.2.1
  Secondary DNS: 194.168.4.100
  Suffix DNS: Belkin
  Subnet mask: 255.255.255.0
  Server's domain suffix:
  Certificate: Not Applicable
  Software token: not Applicable

  Code hotspot:
  Hotspot message: not Applicable
  Hotspot status: not Applicable

  VPN
  Current profile:
  Address of the hub:
  Contact: n/a
  Authentication: n/a
  Secure the device IP:
  Status: VPN profile is not found.
  Hub address: n/a
  Hub IP:
  Primary DNS:
  Secondary DNS:
  DNS suffix:
  Set the subnet mask:
  New attempt to: life of Session:
  Re-login to:
  Failed connection attempts: 0
  Certificate: Software token does not apply:

  The question above is now sorted thanks - active Vodafone BIS on my contract and sudenly the Wi - Fi started working very well!

  Weird - but there you go, the (whims?) wonders of modern technology!

• When in my wordpress dashboard, the Visual Editor does not work?

  Regularly when I'm in my wordpress dashboard, the Visual Editor does not work. Sometimes, not all the time. I tried the following:
  Disabled individual plug-ins
  Theme modified
  cache cleared
  uninstalled, then reinstalled Firefox
  'disable the Visual Editor' unchecked

  Thanks a lot for any help

  When this happens, you are totally unable to type/edit in the edit box, or are there limited functionality? The toolbar appear?

• I need to remove the photos and when I right click on the photo and does not remove on my imac

  I have a new iMac that I'm trying to learn to use.  I would like to delete a lot of pictures. When I right click on the image of the Word remove does not come to the top.  nothing happens.  There is also no trash can symbol.  How to delete pictures?

  On Photos for Mac application you can delete photos by selecting the photos and entering the key combination command + DELETE ⌘⌫.

  It will work in the moments as well as in the albums.

• When I get e-mail with a site said to go to, when I click on the site it does not connect? Is there some kind of filter that prevents connection Web sites? Thanks, Jo

  When I receive an email with a Web site pointed out, even if I click on the site, I can not connect on the site.  Y at - it sort of a filter that prevents me to access the site and how can I fix this problem.  Thanks, Jo

  If you are using Outlook Express:

  Hyperlinks do not work in Outlook Express or in Word (revised 29-Apr-09)
  http://support.Microsoft.com/kb/823301

  Hyperlinks do not work in Outlook Express after you put upgraded to IE7 [or IE8] (revised 29-Apr-09)
  http://support.Microsoft.com/kb/929867

  If still no joy:

  With the permission of MVP Frank Saunders. [RIP]

  If nothing happens when you click on a link:
  Open Windows Explorer or on the control panel.
  Go to tools | Folder options | Types of files.
  Scroll to [NONE] URL: HyperText Transfer Protocol (NOT the shortcut URL: Internet) and select it.
  Click Edit or advanced, depending on your version of Windows.
  Choose 'open '.
  Click on change.

  "Application used to perform action" should read:

  "C:\PROGRAM may EXPLORER\iexplore.exe" - nohome (check the path to)
  Iexplore.exe to ensure that it is correct and use the double quotes).

  DDE should be checked and in the boxes below, you should have:

  #1:
  « %1 »,,-1,0,,,
  #2
  IExplore
  #3 (white)

  #4
  WWW_OpenURL

  Protocol URL: HyperText Transfer with Privacy should be the same.

  If the foregoing is correct, uncheck the box: use DDE.
  

• the printer port does not recognize hasp key

  I recently bought a Dell rebuilt to replace a running xp sp3 which had overheating problems with windows xp sp3.  I am running a previous software (7.5V2 friendly technology FlexiSign Pro) program that requires a hasp on a parallel port key.  I never had problems with the old computer recognizing the hasp key, but when I try to use this software on the new computer does not recognize the HASP.  I think what may be due to the fact that my new computer printer port is configured as instead of the lpt port ecp.  Is it possible that this could be my problem and I can change the port of older style? Any guidance is appreciated.

  Thank you

  Greg

  If the problem really is whether the parallel port in ECP mode, you can switch to EPP mode in the BIOS.  Restart the computer and keep a close eye at the beginning of the boot sequence for the message that tells you what key to press to enter the BIOS (change system settings or similar).  Restart again and press the key when the message is displayed.  You will have only a few seconds.

• the Air iPad does not connect to a printer to air even if the two are on the same network

  DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".

  Readhere: printing from your iPhone, iPad or iPod touch - Apple Support

• break in series on the com port does not work

  Hello everyone:

  I have the following problem:

  I am writing a command via the ' 'entry visa' vi on my pc com port. in some cases the com port do not return anything. This means that my "visa read" vi would timeout. the problem is that, later, I need to send more orders but must break the line in order to be able to do. I inserted the "breach of visa" vi but didn't have the reaction I was expecting. the line does not break. I tried to increase the duration of the break, but that does not work either.

  Any ideas?

  By using LabVIEW 2013

  A break will not break the connection, it will just a 1 to the Tx line for a period longer than 11 baud (?) or specified length.

  A hardware check that the breakdown is send: connect a scope or a DMM TX and GND, a 500ms break must be clearly visible even on a "slow" DMM (k resistance 10 and two LED antiparrallel or RS232 minitester practice would do the same job )

• USB key into the USB port does not appear in 'my computer '.

  Original title:-drive Flash USB port does not appear

  I have laptop Dell A 4 years and cannot use USB ports. My data flash drive lights flash but nothing shows up in 'MY Computer'

  It turns out that there is a problem connecting to the motherboard... so it ' s not worth repair. However, I believe that I can connect to the Internet by the yellow cable supplied with the router. There is also a card I can buy known as PCMIA card that will give me 2 additional USB ports. It's cheap enough to give it a try.
  Once more a big thank you to all those who have offered their advice on this matter. I'm amazed that so many people are willing to give of their time to help a novice

  Terry

• BlackBerry Smartphones cannot lock the phone through blackberry ID

  Hello

  I take a phone of my coleague who has left the company. For some reason, I can't able to connect on the phone. Firstly I didn't at first, the password of my coleague ex, I went online and changed the password. However, when I want to connect with my new password to unlock the phone, I have this message:

  "You have exceeded the number of attempts to connect.

  For security reasons, you have been locked for 15 minutes. "Click on forgotten password if you need create a new password.

  But after 15 minutes and try again, the message... helpppp

  You try the BlackBerryID, or the security password, on the device?

  It looks like the BlackBerryID if you are locked out for 15 minutes.

  A wrong entered security password would give you only a message something like «wrong password 2/10»

  Then, to change the BBID of this device and make it 'your own' device, you'll need to do a wipe of the device security. This will delete all the data in personal, contacts, calendar, etc. and restore the State of the plant basically.

  Read this: BlackBerry smartphone must be wiped before transferring the property Security