Features of ThinkPad go after than re-installing windows

Similar Questions

• After you have installed windows 7 on my hp pavilion dv4000, vga and audio routed to work. Help me

  After you have installed windows 7 on my hp pavilion dv4000 case, vga and audio to work. help me with a recommended sound and audio drivers for system operational windows 7. Please

  Hello:

  Please click on devices in the Device Manager. Then click on the Details tab. In the properties of the drop-down list, select the second element (Hardware ID). After the first string that will appear for each device.

  Those who will identify the features of model you have and I can try and find the drivers for them.  East - Windows 7 32 or 64 bit, you have installed?

  Paul

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• Pavilion dv6645us after you have installed Windows 7 ultimate x 64 no drivers for base system device

  After you have installed windows 7 ultimate on my pavilion dv6645us laptop, I can't find drivers for base system device, location: 2 PCI Bus, device 5, function 2. Also for another device of the Base system, location: 2 PCI Bus, device 5, function 3, I can't find the drivers. And I have a unknown device, location: on the system as 'good' to ACPI Microsoft. (I don't know the English translation).

  The only thing that does not work on my laptop, I noticed is that I can't write data to my external hard drive (WD essential 1 TB NTFS), I can access the drive and get the data off of it, but when I try to put my computer on the outside driving my laptop goes down (it reacts with difficulty (, all usb devices are disconnected and I have to manually restart the computer by holding down the button for 5 seconds).

  Is this a known problem and the most important is there a solution for this?

  Thanks in advance.

  Hello

  Base system device is for sure your player card.

  Use your Vista drivers for this problem:

  Ricoh 5-in-1 card reader here

  If there are problems with the excavation using compability mode. How al information here.

  How to solve other problems as unknown device?

  Go to control panel-> Device Manager control

  Click with the right button of your mouse on each yellow Panel and choose Properties. Then click on background details and paste hardware ID here. This way we will know what it is.

  Below, an example of how you do it:

  

  

  

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• network card and other missing drivers after you have installed windows 7 ultimate on my elitebook 8540w

  HP Elitebook 8540w, model WH137AW #ABA - this laptop and was previously running a trial version of windows 7 Professional 64-bit. I wanted to install windows 7 ultimate 64-bit. I chose to install instead of upgrade that I assumed that the demo version was not expandable. Before the installation, I was able to connect to a wireless network with success. After you have installed windows 7 ultimate successfully, I was more able to connect or see all the networks. The diagnosis error indicates that I can miss a network card, or if I don't have one, the driver may need to be reinstalled. I saw a previous post and answer that looked very similar, but the difference is that I am out of my network card driver, so I'm not able to download any other drivers. -help me please!

  Yes... you can do. If you get confused on what to install, please provide the hardware ID.

  HardwareID: (open start, type devmgmt.msc and press on enter.) Double-click on a device. Choose the Details tab, then the hardware in the menu ID drop-down).

• I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader.

  I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader. Someone know whey and how to fix it? Thank you

  Run Windows Update - it may install drivers that does not get installed on Windows 7 home.

  If this does not help, look for Windows 7 drivers for this device on the Sony web site.

• After you have installed windows 8 my cd rom is not working.

  After you have installed windows 8 my cd rom is not working. Why this is happening

  Most likely your drivers for the cd rom does not have go into Control Panel/System Device Manager and security for all marked devices other devices that may not have installed the drivers. Most likely, you will need to go to your manufacturers website and find the driver for your specific model, you should be able to download and install it from there.

• After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

  After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

  Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.

• How to restore the original partition after reformatting accidentally installing windows 10

  See the problem below. I can not get a USB stick formatted with FAT to be recognized by bootcamp or to download the drivers to continue.

  The problem occurred after that my son wanted to re - install windows 7 after that that he has been upgraded to windows 10 and utilities disk to reformat the drive hard windows installed.

  

  OS X Terminal, you can post the output of

  diskutil list

• After you have installed windows on my notebook 10 notes all drop-down history menu and favorite tools have black background so can't read the text

  After installing windows 10 on my notebook that all drop-down menu history bookmarks tools etc. have black background so can't read the text

  It was much simpler that that I just check if my version of FireFox has been updated today it wasn't downloaded and everything beautiful. Thank you for everything that other gibberish "I also don't know solution but try this" typical in the forums with respect to proposed solution has no address or related to this question please

• After you have installed Windows Xp Pro modem does not work

  I need help I have a new Toshiba Satellite and when I installed windows xp modem PCI got desinstalled could you help me.

  Hello

  It would be interesting to know what device do you have?
  But after the new Windows Xp installation it of necessary to install the modem driver.
  All the drivers, that you can find on the Toshiba site. Note: you need a modem driver for the country where you live.

  Good bye

• After you have installed windows 7 on my pc, sometimes different errors whenever I start a game! and I lie down the computer.

  I just installed windows 7 64 bit of vista 32 bit on my acer and then I can't play all games, there is always a different error on games. It has stopped working or a mistake happens! It makes me a little angry when all I wanted was a better pc and now I have sittet in a few days and finally got it right, and then everythings blowing!

  Hi, Jacob Sulkjaer,.

  There are many reasons for the game does not work correctly because each game has its own requirements.

  Method 1

  Check if the game is compatible with Windows 7 64-bit using the Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Method 2

  If you receive same error message after the game is compatible Windows 7, then check the power to the game manual if any software or plugin is required for the game works properly on the game provider's Web site.

  Method 3

  Many games need updated versions to day or greater cards installed on the computer.

  You may need to update the graphics card drivers on the computer by visiting the website of manufacturer of graphics cards download and install the updated driver and check if it works.

  Also update the motherboard chipset drivers by visiting the site of computer manufacturer.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed Windows XP pro, I can't hear all the sounds of Windows

  Original title: I got a virus and my laptop crashed and my friend loaded xp pro and I had xp meadi and now I have no sound and I tried all i can think, and I still don't get any sound

  I had a virus and my laptop crashed and my friend loaded xp pro and I had xp meadi and now I have no sound and I tried all i can think, and I still don't get any sound

  Hello

  Thanks for posting the question on Microsoft community forums. According to the description, you can not hear the sound after installing Windows XP. He would be grateful if you could answer a few questions to refine the question.

  1. What is the brand and model of the computer?

  2 have you installed the audio drivers for the computer?

  3 have you checked the State of the audio device in Device Manager?

  See the steps to check the State of the audio device in Device Manager.

  a. click Start, point to settingsand then click Control Panel.

  b. in Control Panel, double-click System.

  c. click the Device Manager tab.

  d. double-click on a device type, double-click audio for devices of this category.

  e. double-click on a device to view its properties. In the device status box, click the driver tab and click Update driver.

  Follow the given steps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Diagnose and automatically repair audio playback problems:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  I suggest to check the hardware, run the troubleshooter and try to update the drivers. You can follow the article:

  No sound in Windows

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Please reply with the status so that we can help you.

• HP Pavilion ze4900: blue screen of death after trying to install Windows on Pavilion ze4900?

  After the death of my hard drive in my Pavilion ze4900, I replaced it with another hard drive for laptop, I had laying around.

  I also tried to install Windows XP Home from a Windows installation CD, the same OS, the laptop had before the hard drive died.

  Everything is going well until the laptop has been made all the installation files, instead of giving me the opportunity to install Windows or repair Windows, the laptop will eventually show me a blue screen with the message:

  "A problem has been detected and windows has shut down to prevent damage to your computer.

  What can I do to fix this? I installed Windows XP on another computer using the same CD, so the CD disappeared not corrupted and replacing the hard drive is hardly used.

  Any help would be greatly appreciated!

  @zenvo2015,

  Hello and thanks for the display on the HP support forums.  The first thing you want to check is if there are any problems with the hard drive that you put in.  Run BIOS diagnostics for the drive and the equipment to make sure that there is no problem.

  Laptops HP - diagnostic system (F2)

  And.

  HP Notebook PC - test a hard drive from BIOS

  Please let me know how things are going.

  Thanks again for posting and have a great day.