features of Windows 7, no drivers for other devices

Similar Questions

• Need help - Y510 XP drivers for other devices

  Hi all

  I just formatted my C drive and put XP SP3 on it... After installing all the xp drivers available online... I can't always get all the drivers for the machine. I checked in the DEVICE MANAGER... and in the OTHER DEVICES section... it showed 3 DEVICES BASE SYSTEM with the question mark next to IT... could someone enlighten me on what it is and how or where to get the driver appropriate to remove... the system works always well with her he... he really boring does knowing that he always there...

  Thanks for the help

  Looks like lack of card reader drivers. Locate to consumersupport.lenovo.com

  It would be extremely useful to also post Device_ID sections of the device properties in Device Manager.

• Qosmio G10 - 133 drivers for other devices

  Hi friends.

  Yes I know that it is an old laptop. I recently had to reinstall the software due to the failure of the hard drive. I always have problems. Toshiba has installed a new motherboard with the Nvidia Geforce Go 6600 video chipset upgrade years ago. Since then I always had problems of resettlement using the original disks. I was never able to reinstall the Qosmio Player and end up always with the laptop reboot after installation of the software, and goes to the blue screen of death. I have now abandoned the qosmio player with the installation discs (Windows MCE) and just install Windows XP. However, here's the problem:

  In Device Manager, I get some errors:

  Other peripheral States MULTIMEDIA VIDEO CONTROLLER does not... what the land is that and where can I find the driver?
  DEVICE UNKNOWN as does not work... what hell is this possible and what drivers?

  Hello

  Take a look at the HOWTO:

  * How to identify an unknown device (e.g. LAN wireless module)? *
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  This will help you to find which device it is and which driver you need!

• I can't find the drivers for the device of 'other '.

  I can't find the drivers for the device of 'other '.

  There are 3 basic system features that are all to even show a yellow '! ' in Device Manager.

  1.

  Location: Bus PCI 21, device 0, function 4

  PCI VEN_1180 & DEV_0592 & SUBSYS_20CA17AA & REV_11\4 & 3B3A03B5 & 0 & 04F0

  2.

  Location: Bus PCI 21, device 0, function 3

  PCI VEN_1180 & DEV_0843 & SUBSYS_20C917AA & REV_11\4 & 3B3A03B5 & 0 & 03F0

  3.

  Location: Bus PCI 21, device 0, function 5

  PCI VEN_1180 & DEV_0852 & SUBSYS_20CB17AA & REV_11\4 & 3B3A03B5 & 0 & 05F0

  Please help me to fig on which driver should I install to solve this problem.

  Sincerity,

  Thank you very much

  T61p: 6459CTO T9300, NVidia Quadro FX570M - 256 MB op GL, 15.4 "WSXGA + TFT, 160 GB 7200 RPM HDD, 2 GB of RAM, Windows XP Pro

  Thank you very much

  Finally, I have foound they're driver for Ricoh 4-in-1 card reader

  First time I think it wasn't this card because I bought the card reader chip, so I don't think on this driver for the card.

  in any case thank you

• HP windows 7 upgraded M7-1015dx 8 windows now missing 1 drivers in other devices.

  I recently bought a HP m7-1015dx with windows 7 and high leveled for windows 8. After that cleaning installed, I got notification that wanted me two drivers in other devices in Device Manager. The first pilot, I was able to patch from a link on a blog with this specific missing driver. The second pilot missing under other devices is 'PCI Driver' on 2 Bus PCI. Under properties for this device, it reads "device PCI\VEN_10EC & DEV_5229 & SUBSYS_522910EC & REV_01\4 & 37c85ff0 & 0 & 00E1 was configured. I tried to update this specific device for a driver, but no luck any ideas?

  The Realtek Card Reader Driver for Windows 8 fixed, thank you.

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 2220us G7: drivers for pci device G7 2220us - windows 7 64

  Decommissioning of the os from windows 8 for windows 7 64 and I lack of drivers. HP do not support win7 for this laptop G7 2220us

  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Missing drivers for PCI device please help!

  Hello:

  You should be able to use all the W7 x 64 drivers and software the g7z-2100 on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G7-2100-notebook-PC-series/5262610/model/5275620

  You need the driver for the hardware ID you have posted.

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56467.exe

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Unable to connect to the VPN. I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Recently, I upgraded my windows vista business to windows 7 Professional and can not connect to the VPN. When I did a search on the internet I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Vijay
   
  Original title: miniport network driver extended WAN sstp

  Hi Vijay,

  You can view this issue in the Forums of TechNet Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• HP pavilion 15-p003tx: drivers for unknown devices

  I had installed a new OS (windows 8.1 64) lately and I don't seem to find the drivers for the devices listed in the Device Manager window

  Other devices-> SM Bus controller

  ID of material-PCI VEN_8086 & DEV_9C22 & SUBSYS_2281103C & REV_04
  PCI\VEN_8086 & DEV_9C22 & SUBSYS_2281103C
  PCI\VEN_8086 & DEV_9C22 & CC_0C0500
  PCI\VEN_8086 & DEV_9C22 & CC_0C05

  -> Unknown device

  ID of material-ACPI\VEN_HPQ & DEV_6007
  ACPI\HPQ6007
  * HPQ6007

  is it possible I could get these drivers?

  Thank you

  Hello

  First of all, download and install the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66094.exe

  When the installation is complete, restart the laptop.

  When windows has reloaded, download and install HP 3D DriveGuard on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error code 28: the drivers for this device are not installed for Ethernet controller

  Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

  I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

  Hi jhawkerchic,

  1. What is the number of brand and model of your computer?

  To resolve this problem, you must install the latest version of the drivers for the device.

  You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

  You can see the following article for more information about the error Code 28:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Impossible to install the mouse, the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver.

  Hello

  I recently bought a windows mouse (Microsoft wireless mobile mouse 1000). When the connection of the transceiver nano in my computer it is unable to install the driver.

  I tried many fixes but none work, I downloaded the driver from the website driver Microsoft but the mouse still does not work.

  When you install the driver he always says "the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver. »

  Why would access denied?

  Any help would be great.

  I am running Windows 7 Home Premium

  See you soon

  Robert

  Hi Robert,.

  You receive this error during the installation of other USB devices?

  Usually this kind of error messages happen when we are not connected as an administrator.

  You can read the following article and check if that helps.

  Code 28: The drivers for this device are not installed

  Please return to the State of the question.

• The drivers for this device are not installed. (Code 28) for the ALL-IN-WONDER RADEON 7500

  I ran a windows update and a hardware update for ALL-IN-WONDER RADEON 7500 was available. I wasn't sure what it was, but I did research some information about drvier... or windows hardware and device driver has informed me that it detects what device(certain hardware) I have on my computer to install the update. (I don't know if it's true) anyway, since then, when I start my computer, the 'new hardware found' window. After investigating on I found it cause the ALL-IN-WONDER RADEON 7500 (I don't think I know what it is). There was my this info in my device (6 times) Manager: its an unknown device located in the ALL - IN - WONDER RADEON 7500 and it states that "the drivers for this device are not installed. (Code 28) "what is it and how to fix it." I don't know if I'm to disable or uninstall. As I said, these updates I got Windows update manager and I'm guessing that it was not successful.

  That is, what it does and how can I solve this problem?

  Thanks in advance

  Try to go to this link which is AMD and download the drivers for it.

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.5&product=2.4.1.3.14.3.2&ContentType=GPU+download+detail&OSType=Windows+XP+-+Professional%2fHome&keywords=&items=20

  The question to be a tunner TV that you have installed in your computer that is missing the drivers at startup. You receive the error because when your computer starts, it loads this device to make it ready for use, when you want.

  Good luck! Please rate me upward if you find my post helpful. Thank you!