Need help - Y510 XP drivers for other devices

Similar Questions

• features of Windows 7, no drivers for other devices

  I have a HP Pavilion 4dv-1444dx with Windows Home Premium 64 bit.  I'm missing the drivers for the "other devices" and "HP Mobile Broadband un2400 Module." They are in the same category.  Can anyone help? Thank you very much.

  Other devices

  Base system device

  Base system device

  Base system device

  Module of high speed Mobile HP un2400

  They have all the exclamation points in front of them.

  Djengel

  You need to go to each Device Manager and right click > properties > details > use the pull down to find the hardware ID and Google them.  You can take the results for HP to find the correct drivers

  

• Qosmio G10 - 133 drivers for other devices

  Hi friends.

  Yes I know that it is an old laptop. I recently had to reinstall the software due to the failure of the hard drive. I always have problems. Toshiba has installed a new motherboard with the Nvidia Geforce Go 6600 video chipset upgrade years ago. Since then I always had problems of resettlement using the original disks. I was never able to reinstall the Qosmio Player and end up always with the laptop reboot after installation of the software, and goes to the blue screen of death. I have now abandoned the qosmio player with the installation discs (Windows MCE) and just install Windows XP. However, here's the problem:

  In Device Manager, I get some errors:

  Other peripheral States MULTIMEDIA VIDEO CONTROLLER does not... what the land is that and where can I find the driver?
  DEVICE UNKNOWN as does not work... what hell is this possible and what drivers?

  Hello

  Take a look at the HOWTO:

  * How to identify an unknown device (e.g. LAN wireless module)? *
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  This will help you to find which device it is and which driver you need!

• I can't find the drivers for the device of 'other '.

  I can't find the drivers for the device of 'other '.

  There are 3 basic system features that are all to even show a yellow '! ' in Device Manager.

  1.

  Location: Bus PCI 21, device 0, function 4

  PCI VEN_1180 & DEV_0592 & SUBSYS_20CA17AA & REV_11\4 & 3B3A03B5 & 0 & 04F0

  2.

  Location: Bus PCI 21, device 0, function 3

  PCI VEN_1180 & DEV_0843 & SUBSYS_20C917AA & REV_11\4 & 3B3A03B5 & 0 & 03F0

  3.

  Location: Bus PCI 21, device 0, function 5

  PCI VEN_1180 & DEV_0852 & SUBSYS_20CB17AA & REV_11\4 & 3B3A03B5 & 0 & 05F0

  Please help me to fig on which driver should I install to solve this problem.

  Sincerity,

  Thank you very much

  T61p: 6459CTO T9300, NVidia Quadro FX570M - 256 MB op GL, 15.4 "WSXGA + TFT, 160 GB 7200 RPM HDD, 2 GB of RAM, Windows XP Pro

  Thank you very much

  Finally, I have foound they're driver for Ricoh 4-in-1 card reader

  First time I think it wasn't this card because I bought the card reader chip, so I don't think on this driver for the card.

  in any case thank you

• Need drivers for unknown devices after downgrade xp

  Hello

  Ive followed guide Cheryl downgrade my CQ40-415 AU to XP. Worked like a charm... Thanks a lot for this...

  I was wondering if someone could republish the drivers for unknown devices 7...

  Current link is dead. Ive tried looking for an alternative, but nothing helps...

  Original drivers link:

  Unknown devices (buttons drivers),
  http://www.mediafire.com/?nnnzjmojcjy

  If anyone has the please repost...

  Thanks for help and congratulations! for the guide

  Sorry for the broken links. We work to upgrade several links in the guide.

  Unknown devices ICI

  Most recent ENE CIR (infrared receiver) ici

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.

  I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.  Laptop is the Intel Pentium M processor 2.00 GHz RAM, operating system, 32-bit on x 86.  My resolution is not at the right level and videos have hard play.

  I went to the ATI site and when I try to download their drivers, they will not be installed because they do not recognize the Windows 8 operating system.  The site of Dell's Windows XP operating system.
  Thanks for any help.
   
  [Moved from comments]

  Resolved - finally

  2 essential steps
  1 https://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_179256&isLegacy=true#Issue5
  Reconstructions of Dell should be loaded in a particular order until the drivers are installed, that is to say the controllers then the drivers for the chipset and resolution etc. They are specific to this.
  then;
  2 CharlesGrimes comment '... ". searching on my computer for the Dell under the old windows files and the old drivers were loaded. "I had tried this but not good. So went into a ghost of Dell image when the resolution was good on Win7, recovered files in windows/System32, which has old drivers. Does the update in graphic cards [Device Manager] driver and manually looked through above the files recovered from previous instal win7 and YES they charge this time.
  Oh what a relief to have a higher resolution. Experience had taught me how snappy Win8 is, I picked up a shortened bunch of ways to circumvent the operating system, and it is growing on me. WIN8 Pro works best on this old machine than its original Home XP and Win7.
  Thank you Carlos and others for your info that led to my positive resolution.

• 2220us G7: drivers for pci device G7 2220us - windows 7 64

  Decommissioning of the os from windows 8 for windows 7 64 and I lack of drivers. HP do not support win7 for this laptop G7 2220us

  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Missing drivers for PCI device please help!

  Hello:

  You should be able to use all the W7 x 64 drivers and software the g7z-2100 on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G7-2100-notebook-PC-series/5262610/model/5275620

  You need the driver for the hardware ID you have posted.

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56467.exe

• Error code 28: the drivers for this device are not installed for Ethernet controller

  Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

  I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

  Hi jhawkerchic,

  1. What is the number of brand and model of your computer?

  To resolve this problem, you must install the latest version of the drivers for the device.

  You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

  You can see the following article for more information about the error Code 28:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Kindle Fire PC USB connectivity, the drivers for this device are not installed. (Code 28).

  I connect and transfer content from my computer to my Kindle all the time, but today when I plugged the Kindle my pc tells me that the device needed troubleshooting.  After you run the troubleshooter, I gives me this message:

  "The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  This has never happened before, and, no, I have not recently downloaded new applications, programs, updates or had a system crash. It was, as usual, a few things. Where it says "to find a driver for this device, click Update driver" which is non-interactive. I can see it, but you can't click on it. That's happened? What should I do?

  Scott.

  Hello Scott,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run this Microsoft fixit and check if it helps.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Please also try to update the device drivers by using the steps described in this article and check.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Impossible to install the mouse, the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver.

  Hello

  I recently bought a windows mouse (Microsoft wireless mobile mouse 1000). When the connection of the transceiver nano in my computer it is unable to install the driver.

  I tried many fixes but none work, I downloaded the driver from the website driver Microsoft but the mouse still does not work.

  When you install the driver he always says "the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver. »

  Why would access denied?

  Any help would be great.

  I am running Windows 7 Home Premium

  See you soon

  Robert

  Hi Robert,.

  You receive this error during the installation of other USB devices?

  Usually this kind of error messages happen when we are not connected as an administrator.

  You can read the following article and check if that helps.

  Code 28: The drivers for this device are not installed

  Please return to the State of the question.

• Laptop HP 250 G2: the drivers for this device are not installed. F0Z43EA (code 28) - #ABT

  Hello

  I get this error:

  The drivers for this device are not installed. (Code 28)

  model: HP 250 G2 Notebook PC

  Model number: F0Z43EA #ABT

  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  How I solve the problem?

  thnx

  Hello:

  You need this driver for the card reader:

  Download and install the driver first on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• a trick to find the drivers for "unknown devices".

  I see a lot of messages on the forum in which users try to find the drivers for "unknown devices" in the Device Manager.  That's how I usually go on the search for drivers for these users.  I thought that the community, this may be useful.
  
  I use a site called pilot identifier.  However, I do NOT use the stand-alone application.  I'm NOT suggesting that do you.  I have not used the app, so I can't speak to its usefulness.
  
  I use the site to determine exactly what is the material element.  To do this, the site doesn't have a search function, I use a updated Google search the.  I will now give the steps with examples.
  
  First of all, you need the hardware ID for your hardware.  To locate this information, follow these steps.

  1. Click Start, type "Device Manager" and press ENTER.
  2. Look for the device that needs a driver.
  3. Right click on the device and select Properties.
  4. Go to the tab "Details".
  5. Select hardware ID from the drop-down.

  Here is an example of a hardware ID:

  HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_103C3047 & REV_1001.

  I then use this Hardware ID and Google to determine what the hardware item by searching for the use of the site: modifier for Google.  So, my research looks like this
  
  "site:www.driveridentifier.com .

  HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_103C3047 & REV_1001.
  
  When I go to the first result, it will be, in general, identify the material at the top of the page.  Here is the page for my research above.   The page identifies audio material like "realtek high definition", which is correct because it's the hardware for my sound card ID.
  
  Now, on this page if you scroll down it gives you a list of all OEM drivers for this piece of hardware.  However, you cannot download the drivers from them without having to install their software.  What I do is so, note the name of the driver for HP.  In this case, you will see that she is named "sp59642.exe".

  Because I can not download the driver from the website, or even be directly connected to HP's Support site from there, I still use Google.
  
  This time, I use a search of "sp59642.exe" in Google, which returns this page as the first result.

  I can't always find the executables that are listed by pilot identifier.  For example, I can't locate sp59660 or sp59662 who are both on the same list.  So it may take a few tries to find a driver, but I had some success using this method.

  I hope the community finds this useful tip.  Have a great week everyone!