Fedora 17 does not detect my network wireless Satellite 11 850 L.

Similar Questions

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Reading TCP does not detect the network closed conncetion error (66)

  Hi dear all,

  Instead of LAN I use WIFI to connect PC and mobile. Read all communications and write operations are performing ok. But the only problem I am facing is that once I disconnect the network from a mobile phone connection my labview TCP read operation does not detect it and only timesout at the specified interval. Although for Bluetooth connection network if I disconnect mobile then BT read detects it as network conncetion closed in error by peer (66).

  Can someone help me on this.

  Thank you & best regards

  Zdzislaw qureshi

  Hi Zdzislaw,

  The behavior you're seeing is expected for TCP as the device will timeout while it is looking for the connection close the connection.  This Wikipedia article explains how TCP protocol works in relation to a handshaking procedure four lanes running in order to close a TCP connection.  I hope this helps!

  Kim

• VM does not detect the network drivers

  I am in need of VMWare and have installed a Windows 7 VM but it does not detect the drivers for the network.  What drivers I need to give it, it of the network drivers for the host machine or is this something specific to VMWare?

  Thank you

  Simon

  Settings edit-> Options tab, you can change the guest operating system type. Check if Windows 7 is available. If this is not the case, try WIndows 2008 or vista.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Re: Hitachi Drive Fitness Test (DFT) does not detect the HDD on Satellite A660

  I have a Toshiba Satellite A660 PSAW3C-047017 with a HARD MK6465GSX Toshiba drive. After experience, some consecutive failures of start-up, I was told on the Toshiba forums to use Drive Fitness Test (DFT of Hitachi).

  I burned the ISO to a CD and booted from it (I must press F12 for boot options and select the optical drive), which is to run successfully. However, it does not detect my drive HARD - the list is empty.

  Is there something I need to do to make visit to DFT?

  I cannot commend this third part software features, but I want to know if you still have these failures to start your portable computer satellite?

  What's the problem?

• Satellite L650 does not detect wifi networks

  My laptop Toshiba Satellite L650 ceased to detect wireless networks.
  It shows only Dáil and vpn...

  The wireless network is not detected.
  I was able to connect to the network using my phone, so something was wrong with the laptop.

  I also checked if the broadcom 802.11n works or not and it appears as works perfectly.
  But don't detect is not wifi networks.

  Could someone help me with this?

  Wireless network card is enabled?
  Is WLAN led on when you use the FN + F8 key combination?

• My macbook does not detect the dell wireless mouse

  I have the macbook air. I tried to connect my macbook to my Dell Wireless mouse. But my macbook could not detect the mouse

  Without a model number, we cannot exclude that particular mouse is incompatible with OSX, especially if it is old.

  OS X pair with a large number of devices bluetooth automatically, but some need to be put in pairing mode.  You will find the Dell mouse model and see if that is his business.

• 5.1 ESXi does not detect my network cards during installation

  Hi I am trying to install esxi 5.1, but during the installation, I get an error not detected no physical network adapter and then abandons the instillation. I know that my network card is not detected until I have install the driver, but I don't know how I can install the dryers to exsi, during the installation of windows.
  

  When I try to search the compatibility guide I get no results.

  
  

  My specs are:
  

  MB: FOXCONN P9657AA
  BIOS VERSION: Not sure
  CPU: Intel (r) Core (TM) 2 CPU
  6420 @ 2.13 GHz
  2.13 GHz, 8 GB of RAM
  Memory: (DDR2 240Pins) (CORSAIR)
  VGA: NVIDIA GeForce 8500GT NX85T256H PCI Express X 16
  PSU: Not sure
  HARD DRIVE: 1 MAXTOR IDE HARD DRIVE 250 GB
  CD/DVD: LITE-ON DVDRW LH-20A1P SCSI CdROM Device
  OS: N/A
  Network cards: OnBoard LAN

  LAN Chipset - Marvell 88E8056

  Max LAN - 10/100/1000Mbps speed

  and a second NIC not sure of the brand, I pulled it on an old PC that I have laying around.

  Thank you

  network Marvell cards is not supported according to the guide of comptaibility

• Aspire ES1 does not detect wifi networks

  After a frustration of a few hours, I turn on this forum to help you, please. Ours is not a unique problem, but further discussions on the same issue did not provide enough help.

  Until this morning, the Aspire had only undetected (and connected to) our home wifi network, but has detected nearby wifi networks. Now, he finds none. Our other four devices continue to connect as usual.

  We looked at the list of devices under "network adapters" and in this list, according to the Acer support page, we should have two cards among others here: Ethernet card for wired and wireless network adapter. It is not present.

  We do not know how they came to be "lost" or how we can restore them. Any help would be appreciated and please keep in mind we are reasonably computer, but not technicians.

  Or should I just send the wretched machine back?

  In this case, it is recommended to run the system restore to restore your system to a point in time when your wireless network worked very well. To learn how to perform the system restore, you can check the link below:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Hope this will help you.

• Windows does not detect my network

  I just reinstalled Windows XP on my computer that previously had Windows 7 RC on it. I couldn't figure out how to get my internet connected, so I searched online on our other computer. (This one) It says to turn off my computer and connect the Ethernet cable from my router to my PC. I did, turned my computer and still no internet. Just before when I still had Windows 7, I could connect fine.

  Here's how I'm connected by the way:
  Comp. 2 connected wireless.
  Modem (DSL) - router (SMC Networks)
  |
  |
  Comp. 1 (connected by Ethernet cable)
  So, how can I get Windows XP to connect? I still need to update to SP3 of SP1.
  Also, when I click on show all connections, or whatever, it shows nothing.

  I think I know the problem. I double click on controller Ethernet and it says that the driver for this device is not installed. I clicked Reinstall... automatic and manual for those who do not work because I can't connect online. So, how can I install the driver?  Here, the support is great. Thank you guys!

  Can download you on a USB of your other computer? -B-
  http://www.officeforlawyers.com
  Author: Guide to counsel for Microsoft Outlook

• Windows 7 does not detect a network adapter driver.

  So I just did me install windows 7 since vista 64 bit and I noticed that I had no internet. I did some troubleshooting and he told me that I have no network card driver.

  
  
  How can I fix?
  
  
  He said that my Ethernet controller drivers are not installed.
  
  
  Intel (KBIBX10)
  NVIDIA Geforce GTX 260
  Intel Desktop Board DP55WG

  Hello
  First install the chipset drivers. You can find them here . After installation, restart your system and try to reinstall the lan drivers.

  How to find all the drivers for win7 on the motherboard on the Intel site?

  Enter this link. Choose here in the OS: Windows7, 64-bit-> drivers and below there are all the latest drivers:

  Audio , Lan , Chipset , RAID and CIR .

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Brand new Dell R520 with Broadcom 5719 does not detect installed NETWORK adapters for

  Trying to install ESXi 5.1 on a new R520 with 2 Broadcoms onboard and a quad prot 5719 and install it gets all the way to the end and just which indicates that there is no NETWORK adapters on the system. All BIOS and life cycle the NETWORK maps show. 5719 are on the hardware compatibility list. Ideas, any help would be appreciated.

  Thank you!!

  use iso Dell for your 5.1 installation

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-R620?driverId=XWYR5&osCode=XI51&FILEID=3005015335

• 2000-2120TU HP laptop: Wifi network does not detect

  Hai,

  Recently I reinstall windows 7 on my laptop. Now it does not detect wifi networks.

  Hello:

  Have you installed the driver for the wireless card?  Otherwise, you must...

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56572.exe

  You also need the bluetooth driver for this model wireless network adapter.

  This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56573.exe

• Applications Windows does not detect my wireless controller

  Windows applications (windows store games) does not detect my speedlinkxeox wireless controller pro, earning 8.1 and win 10, but it works perfectly fine on pc games. Tried many games. Yes with the receiver. Is there a work around for this problem, I have the drivers installed too.

  Hello sunny

  Thanks for posting your query on the Microsoft Community.

  You can deal with this issue because of a corruption in Windows applications.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. You receive no error message / error code on your system?

  I suggest you to follow the below methods and check.

  Method 1: modern convenience store app.

  The modern convenience of the app store is built in the Troubleshoot utility which can detect and automatically correct most of the errors of the app. So, I suggest you to download and run the troubleshooter modern app to fix application errors.

  You can download it here:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  If the problem persists, try Method 2.

  Method 2: I suggest you to follow the steps described in the article below and check.

  Solve problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.