Feel like 110 - question of OSX WiFi SCAN configuration

Similar Questions

• Easier nonlinear never - made feel like I'm going crazy

  Hey everybody,

  I used the non-linear curve of Levenberg-Marquardt mounting screws before with great success.  I've used a few times to adapt to complex functions with many free parameters and functions have always shone until I've created my design vi, limits and conjecture of initial setting well.  Now, I try to adapt the simplest function never and I am bombing badly.

  I have exactly 1 (ONE!) setting I'm trying to adapt.  The function that he spends is dead simple.  But how it works makes me crazy:

  1. no matter what I choose as my initial setting, I still get exactly the same result on the table "better adjust the parameters", even if by choosing different values manually, I can clearly a better fit and the residual variations

  2 no matter what, he always runs exactly 6 iterations.  This happens even if I set the tolerance of the extremely small termination, or even if I set my maximum iterations less 6 Nb!
  3. my best value will be 1e14-1e17 I think.  I was wondering if the reversal in orders of magnitude has been causing crashing the algorithm (maybe because he didn't pass the initial value enough even see a difference for the first couple of iterations or something), so I tried also to redo my function as two parameters: one being the coefficient of a number in scientific notation (with the limits between 1 and 10) and the other being the exponent (with the limits between 1 and 20).  I then treated these two parameters in the model turn them back into a single number and use THIS number in the function, but it still bombed just as badly.  I restored the example I posted to the parameter single original fit.

  I'm just completely baffled.  I admit that it is the first time that I tried to use these screws to adapt to a single free parameter.  These screws are designed only to maintain multiple parameters?  If so, why not a not my experience that I described in (3) above works or at least do something?  Also the turnaround in values causes me trouble?  I feel like I fit stuff with huge fluctuations of values before.

  The fact that I always get exactly 6 iterations, is what really makes me feel the nuts.  How is she even learning to 6 if I set the maximum number of iterations to less than that?

  I searched the forum for the last two hours looking for something like this.  Honestly, I could not find anything.  Sorry if it's a crazy stupid question that has been answered before.

  Help much appreciated!  Thank you!

  "1. no matter what I choose as my initial setting, I still get exactly the same result on the table"better adjust the parameters", even if by choosing manually different values, I can clearly a better fit and the residual changes."
  I tried to manually change the setting and found that the smallest obtained residue if the parameter has become closer to 0. In fact, I saw no change in the residue for the 37 lower parameter values or if, because of the scale of the problem. What is a better fit for you?

  The fact that I always get exactly 6 iterations, is what really makes me feel the nuts.
  Feature County includes the function for digital calculations derived partial calls, and we do not verify the number of function for termination until after the partial derivatives are calculated. By default for digital derived is central difference.

  Partial derivatives are very small in the scale of this problem.  Looks like the stepsize at each iteration is only one or two orders of magnitude above machine epsilon. Due to the relative change very low residue induced by small step size, Lev - Mar may report that it is in convergence. Strongly recommend that the scale of the problem, but this may be a moot point because a manual search for the setting seems to show that the setting tends to 0.

  -Jim

• 'Burned' fingers index to use MacBook Pro trackpad: my both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  Yes, I did

  My both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  I do not have this problem before, I bought my new Mac - specifications below: it hurts and I don't have a problem with my windows, iPad or Samsung Galaxy equipment operating systems computers.

  It feels like radiation leaking through the computer case.  Is the radiation involved in the chips?

  MacBook Pro

  Model identifier: MacBookPro11, 4

  Processor name: Intel Core i7

  Processor speed: 2.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP114.0172.B06

  Version of the SCM (System): 2.29f24

  Are you use while plugged in, I feel a buzzing in my 13-inch rMBP (12.1)

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• Is there a way I can change text entry in Apple TV like it's pathetic. The former arrangement was much better and we now have to scroll back to the text input as identification of email in every app feels like the stone age technology.

  Input test Apple tv interface is so pathetic and primitive and feels like the stone age. Its the most boring I've had in any interface computer or "smart." Is there a way to enter (say spell out) e-mail ID that cannot be recognized by voice, and that voice recognition is better compared to google.

  Use the remote app. Or wait for the future update which allows for voice text input, Bluetooth, keyboards etc.  You can always send feedback to Apple http://www.apple.com/feedback/

• I feel like LV is laughing at me while I'm trying to resolve project conflicts...

  I tried to look in other messages on issues while trying to resolve the conflicts, but I don't think that the cause of my problem is the same...

  Here's the story-

  I am reorganizing my project files on the disk and then rebuild and straighten the conflicts of this movement vi and other files on the disc project will (I've done it before without any problems... at least I am sure that I am preeettty)

  in any case, after moving some files around LV is the vi that have been moved, but not all of them - so I right click on one of the vi by the proj that it can't find and select "resolve conflicts" to use the dialog box...

  dialog box appears and I am totally ready to start to resolve some conflicts...

  It lists each vi by name and shows the old path (where it does not find the vi) and the path where he is currently in charge of...  I select the path it is currently responsible to and click on "use the selected item.  The conflict disappears... and I feel like a real fixer conflict... until the same conflict appears immediately to the top where it was less than a second later...  I can sit here and keep clicking Next, but it keeps popping up immediately...

  the hell I'm doing wrong?

  Thanks for any info

  -pat

  Rather than move the files using the operating system and then 'find' files, use the display of files in the Project Explorer, right-click on the files to move, and then select "move the disk.

  This will move the file and update the project at the same time.

• Every game I play works very well for a few minutes, then they lag a few minutes like clockwork. I ran each scan I can think and I can't find anything.

  original title: issues of computer game.

  Every game I play works very well for a few minutes, then they lag a few minutes like clockwork. I ran each scan I can think and I can't find anything. What I can do, how can I fix?

  Assuming that your PC meets the requirements of the games you try and works well when in Windows (not), then try this.

  1. Start the Task Manager goto the tab, click "Show processes from all users".
  2. Run the game in a maximized window, see if the game lags then.
  3. If so, go to the Task Manager and check the CPU usage and the memory usage by clicking on their respective column headers to get as high in the upper part. Is anything hogging resources?
  4. Double control by checking the graphics CPU and memory on the tab.

  or

  Try to run a scan with Malwarebytes - just in case. Download, install, update (right click and run as Admin to update) and then run a full SCAN. It can't find anything either, but it does not take long and helps eliminate the possibility of malicious programs.

  or

  Are you drivers (esp GPU and sound card) to date?

• I get what looks like a type of lines of scanning through my photos printed in Photoshop. They have been taken with a cell phone camera.

  I get what looks like a type of lines of scanning through my photos printed in Photoshop. They have been taken with a cell phone camera.

  You might be low on ink.

• can you help me, l feel like creative cloud of English, but he implemented Türkis, what can l?

  can you help me, l feel like creative cloud of English, but he implemented Türkis, what can l?

  Hello Altan,

  See Change the language setting for Adobe Creative Cloud applications

  It could be useful!

  Rayyan

• I received my annual renewal notice is imminent. However, it does not say how much I pay. How can I make a decision to continue without this knowledge? Feels like a scam?

  I received my annual renewal notice is imminent. However, it does not say how much I pay. How can I make a decision to continue without this knowledge? Feels like a scam?

  As far as I know, prices have not changed, so it's what you paid the first year.

• VI Analyzer Questions: Change the default test configuration and screw "Pavilion".

  I have two things I continue to come through in VI Analyzer:

  1. are there in any case to set the default VI Analyzer so that it applies to all projects, I'm working on that?

  I tried to create a task in project A, registration of the configuration and any attempt to open this file in project B, but it says that the file could not be loaded. The reason for my question is that there are a few default options that just add errors that we don't care (e.g. Controls dialog on the façade - 99% of the LabVIEW code that we are working on is called from TestStand as code modules, so the front panel doesn't really count)

  2. can I score / report some screws as 'safe' for parser tests?

  Basically, some screws may fail some perfectly safe way VI Analyzer tests (e.g. non-stanard errors on a 'closing' VI, who doesn't have a case error structure so that the device always gets closed). I wish I had a way to mark the VI kind VI Analyzer would ignore this particular test. This would allow me to have a rule that says something like "before any construction, run the file configuration VI analyzer and make sure there is not error", as opposed to "run VI Analyzer and examine errors, decide whether or not they are important for the VI in question..." ». An extension to this question would be how do I perform a task VI Analyzer before building when the VI Analyzer screw do not accept files cfg for project based tasks.

  Any help would be greately appreciated!

  Thank you

  Shaun

  1. a project oriented .cfg file cannot be transferred between projects.  Could you possibly create a .cfg unrelated to the project file (under the option 'Start a new task' on the first page of the VI Analyzer) and use it?  He would have no file in the list, but it would have all of the configured tests as you want.  And you could start with this on your different projects .cfg file... you would just add screws based on file (on page 2 of the VI Analyzer), rather than have all come to you in a .cfg project-based.

  2. on page 4 VI Analyzer, you can exclude certain tests to run on some screws and save these settings in a .cfg.  This option is also exposed in the VI Analyzer API with VIAn exclude the VI.vi Tests.

• Scanning configuration

  If we have 5 bow TIE, where we set up scan configuration. We use separate dedicated server or all nodes, configure scan configuration.
  
  Please let me know
  
  Thank you

  (1) is there a query or procedure to find the DNS server.

  You did you have already configured the CAR or you want to set it up from scratch. ????

  You have to work with the system administrator to configure the DNS server to the RAC Server
  Please see the link below
  http://www.Oracle.com/technetwork/database/clustering/overview/scan-129069.PDF

  (2) where this listener scan will be. On the DNS server, or the local server.
  NO.
  scan listener located inside the local server only

  Hope you got all the information.

  Concerning
  Hitgon
  http://hiteshgondalia.WordPress.com

• Atrix question switches HD WiFi

  Anyone having problems with the wifi toggle? I can't turn WiFi sometimes. Go directly to the WiFi system doesn't switch on. When I press the toggle, WiFi will try to start but will switch immediately itself turned off. Basically, I can't turn WiFi on the same scan for available networks. I disabled AT & T smart WiFi app, deleted the cache partition and performed a factory reset data... did not help. I have a phone that is 'certified like new' replacement, and 2nd camera did the same thing. Toggle WiFi turns on if I left the phone on some days. I have to tap several times, sometimes more than 20 times, before the WiFi will switch on. The only solution I found is to restart. But it gets really annoying to have to turn the phone market whenever I want to use WiFi. Is there one alternative other than the phone turned off/on every day? I don't have to put out every day so that this phone works properly.

  My phone did the same thing with 4.1.1 I swap AT & T on my phone twice to the same problem. I figure out what caused this good... It does only when the last network, on that I was was 5 GHz. Does not seem to do it when the last connected network has 2.4 ghz

  -Nick

• Questions Windows Fax and Scan

  Hi all

  After modernizing our systems to small business from Windows XP to Windows 7 x 64, we were unable to use the toolkit provided with our printers Canon MF Fax/scanning, we converted in Windows Fax and Scan

  So far, it's working fine, but I have three questions that I can't find answers to...

  1. when a received fax is deleted, where is he?  I can't to the trash, and sometimes, I delete a fax by chance and here to recover, but can't find it

  2 can we somehow add a comment/topic to faxes received to allow the best management of incoming messages?     Would be really nice if the Inbox can be sorted by sender or subject

  3. can you inbox / outbox backed up/archived/export made?

  Thank you

  Hi Mike,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have some queries about the Windows Fax & Scan utility. I hope you find the following useful answers.

  1. There is no "deleted items" bin ior recycles n Windows fax and scan, so unless you have a backup system, you cannot recover the deleted documents.

  2. No, you can't add a comment/topic to faxes received to allow the best management of incoming messages.

  3. Ideally, the location of the Inbox of fax is C:\Users\ (username) \Documents\Fax\Inbox.

  I would also ask refer you to the following article to understand Windows Fax and Scan.

  Receive a fax with Windows Fax and Scan

  Fax: Frequently asked questions

  Configure your computer to send and receive faxes

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I was once known as Apple girl, but now I feel like a crab Apple stuck in a ditch! Can you get out me

  Yes, I am known as 'Daughter of Apple* ' in my small town. Everyone laughing that I'm an Apple product collector because of the many products that I have and always ready to buy from someone old phone/pad/Mac ect.  Everyone knows who come to if they want to sell their items, have questions or need assistance. Now, the so-called Apple girl is transformed into an "Apple tree" fell from the shot of the tree drifted grass on a hill and stuck in a ditch!  Day after day, trying to figure out how to get out of that ditch all day every day is the same, I do it every day trying to figure out the mystery of my iPhone 6 bought 16 GB brings in new and used less than 2 1/2 months he became all black! Of course my first assumption was that he had to settle of course is that I did. I went to make a phone call and power on a c a few hours later, and when it all began the mystery that is still not resolved and when the daughter of Apple of cities eventually MIA because, like the crabapple she is stuck somewhere and I will give up trying to figure out what to do!  There was no damage to the waters or any other damage. It is protected and a matter of proof of life from the day of purchase. I chatted online with Apple support, also spoke on the phone with Apple support. Online and telephone support from Apple were very patient and great to work with, as they tried to help me. Unfortunately, it comes to sending in Apple or make a trip of six hours round trip to the nearest place that has an Apple expert who can look at. I've never had an iPhone Act in manner and I am very confused.  I have a few iPhones that are down and works perfectly well, but it was used less than 2 1/2 months and won't do anything. I have tried the factory reset hang on to iTunes and nothing. When I put it on charge the red light at the top is not even the light until it is as if the phone doesn't even have a battery inside.  At point of customer service, said he was locked up due to the Apple ID, but already knew it wasn't the issue because who wouldn't keep the red lighting light when plugged in to charge. Is there someone who has experienced anything like this or any reason why this would happen? Any help would be greatly appreciated and help this Apple out of the pit, in which she is stuck!

  < email published by host >

  Perhaps can you explain your problem without the history of flowery back? It makes your technical support issue very had to follow. Did you drop your phone in a ditch?

  What have you tried to do? What happened when you tried? Have what troubleshooting steps you taken?