Windows HotStart button works only in Windows Vista.

Similar Questions

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A130: Fn key not working only not with Vista - only FlashCards

  Hello

  I've been looking around in the forums, but I couldn't find solutions to my problem.

  I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
  I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.

  The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.

  Is there something else I could do?
  Thank you

  I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.

• Adobe Air ServerSocket even works only on XP/Vista/7

  I'm having a strange problem with a vent Server I wrote.

  I have an Air application written using Flash Builder 4.  It is a simple HTTP server.  It has the purpose to open a server on a specific port and use a web browser (html and swf) files.

  When I run the air application on my desktop (windows 7, firefox 4.0b11, ie8, flash builder 4 compiled with flex sck 4.1.0) everything works fine.  If I start the server via the Flash Builder debugger or actually do the full packing and install as a standalone air application then run it using the Air runtime as would any user.  I load the server, punch in the address of any place and the loading of the page and the file requested swf display correctly.  When the server is running on my desktop I tested clients such as Windows XP and Vista with IE8, HTC Android Evo4g phone and the Playstation 3 browser.  Any client tested with the server running on my desktop applications are dealt with properly and pages/FSV load and display correctly.

  The problem is when I run the air on another computer application.  When I package it and install on one of my two systems test (Windows XP and Windows Vista) things start to go wobbly.  Air app charges on two test systems, but when a client tries to use their web browser to request a page things are not properly displayed.  The customer can load the HTML fine but the swf that it receives from the server is not displayed.  I can check the log on the State Server and see HTTP GET processing and the sent file.  However, the browser just displays a blank box where the SWF file must be.  With the server running on one of my two test boxes (XP and Vista), the same customers who can connect and view the html code and swf shipped from Server experience this issue.

  I think I've eliminated application of browser such as the problem of testing different browsers on different operating systems on each of the test facilities.  As far as I know, the problem is on the side of the application server.  The server uses the SocketServer class to listen to a connection and then writes the HTML headers and content to the socket manually, I don't use any external libraries to write on the socket.

  Here is the code to write on the socket when a swf file is requested.

  {

  var content: ByteArray = new ByteArray();

  var stream: FileStream = new FileStream();
  Stream.Open (file, FileMode.READ);
  stream.readBytes (content);
  Stream.Close ();

  socket.writeUTFBytes ("HTTP/1.1 200 OK\n");
  socket.writeUTFBytes ("Content-Type: application/x-shockwave-flash\r\n");
  socket.writeUTFBytes ("Content-Length:" + content.length + "\r\n\r\n");
  socket.writeBytes (content);

  }

  I don't think that the problem is with the writing of decision-making because it works on my desktop but not when the server runs on another.  I wonder if the problem is with a dependence on external system.  Are there external libraries, visual c ++ runtimes, libraries tcp/ip used by Air to meet the demands faced on different systems of exploitation/versions?  I searched the web and navigate adobe live docs for a few hours on this but can't find a solution anywhere.  If we need more details, please let me know.  Any help would be appreciated.

  Hi Tim,.

  I was going to suggest you do exactly that, having the client to send a message that the load is complete.  I know that's not optimal, but unfortunately there is not a better solution right now. We are aware that this is missing and we are working on a solution for a next version.  You can follow this bug to http://bugs.adobe.com/jira/browse/FP-6

  Thank you

  Chris

• Mute function button works only on Satelite A660

  Hello

  I couldn't do the button mute to work. The flight of the up/down button, the toshiba buletin Board, play/pause, wifi and eco button works. I couldn't find the software that controls the function keys. Does anyone know how to configure it? Previously on my old Satelite M50, there was a software toshiba utility that allows users to configure each button.

  I found that the Toshiba software utilities help button, but not the Mute button. I found the TBSsoundMute file in the Progrm files/Toshiba/SCT/and clicking on the file makes the mute sound. How can I associate the button mute for the file? The only thing that happens when I press the button mute is the buttons all light which I think is related to the Dimmer.exe software.

  I managed to work the button replace the Dimmer function with the software of mute, now mute button, but the dim buttons not now. I don't know if it is the default settings. Is there a way to mute and dim at the same time? So people will know it mutes and dims.

  Post edited by: mystvearn

  Post edited by: mystvearn

  > When I managed to work the button replace the Dimmer function with the software of mute, now mute button, but the dim buttons not now. I don't know if it is the default settings. Is there a way to mute and dim at the same time?

  You can set the key Mute or Dim.
  The two of them at the same time is not possible!

  So I think the thread is answered.

• Buttons work only once or twice

  Hi guys, I'm still new to Flash and I really need help. Here is the story:

  so I do a simple digital comics right now, that shows one or two signs/pictures/drawings at a time with only 3 buttons to navigate (a next button, an exit button and a page selection button). Here is some info:

  -J' use CS6

  -J' I use simple tweenings for each photo (fade in/out, queries, etc.)

  -J' have it will publish in 2 formats, .exe and .apk for android

  -J' have 7 scenes, 1-6 for the main comic and scene 7 for the selection menu of page (within a clip)

  -I only use video clips of 2, one for the intro animation and another for page selection menu I mentioned above

  -because I'm still a noob, I always use excerpts of code (sorry)

  -J' I mostly only use these code snippets: stop at this image, click here to go to frame and to play, click here to go on stage and play.

  -for the exit button, I use this code:

  button_e.addEventListener (MouseEvent.CLICK, fl_MouseClickHandler);

  function fl_MouseClickHandler(event:MouseEvent):void

  {

  fscommand ("QUIT");

  --utiliser use for the next button, copy the following code:

  button_1.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_3);

  function fl_ClickToGoToAndPlayFromFrame_3(event:MouseEvent):void

  {

  gotoAndPlay (frame number);

  }

  for the page selection button, I use this code:

  b_page.addEventListener (MouseEvent.CLICK, fl_ClickToGoToScene_40);

  function fl_ClickToGoToScene_40(event:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "scene 7");

  }

  Now, here's the problem:

  The page selection button worked fine initially. Then I click on the next button several times (lets say, from page 1, stage 1, I clicked the next button several times until I got to page 6, scene 2). Then I click the page selection button that opened the clip. Inside of this video clip is several buttons another, each of them takes me on different pages. For example, I clicked on a button linked to page 7 (inside the scene 2). Furthermore, the code goes like this:

  b_7.addEventListener (MouseEvent.CLICK, fl_ClickToGoToScene_3);

  function fl_ClickToGoToScene_3(event:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (500, "Scène 2");

  }

  Still no problem detected. Then I continue to click the next button to read the rest of the comic strip. At this point, the page selection button (and the exit button) has stopped working. Clicked on it so many times and nothing happened. So, just like what I wrote in the title, it does only once or twice.

  Any suggestions?  (I wanted to download the .fla so you guys can take a look, but the size is too much )

  Screenshot:

  http://S25.postimg.org/azarwqvzj/screenie.jpg

  Thank you!

  put the button of your first scene on its own layer at the beginning of the stage and set its name.  extend his chronology up to the end of the scene.  test.  all the problems?

  If not, add additional keyframes in the layer of the button according to the needs of your project, making sure NOT to remove the button no keyframes.  test.  all the problems?

  If this is not the case, do the same for the other buttons in the other scenes.

  If you want your button to NOT appear in some frameworks do NOT for this key frame.  set its visible property to false or using removeChild.

• Interactive InDesign Fade in/out buttons work only once in the SWF file

  I have an animation sequence with a release button with fade effect to scroll on a chart image overlays. I used a trick of forum of ceating a rectangle empty, the box and the picture, stating the Group fade, and then I assign to the out button. This all works fine except when you click on the sequence of keys and the content that the Fade In button work even more, you can call the fade out as many times as you want. Definition of the animation loop or play more than once does not work. I thought it was a question of order or a layer group or maybe I need some kind of Reset button? Ideas for a software fix or work around?

  The only problem is that we are talking about CS6. There is no 'Animation' and ' Options: Reverse ' buttons in CS6.

  

• Dell XPS One A2010 CD eject button works only with Windows 7

  I have recently upgraded to Windows 7 and everything seems to work fine, except the CD eject button does not work, can eject CD with Windows Explorer by right-clicking on the CD drive and select eject.

  Down loaded and installed the R168233 - Intel DELL0100 proximity sensor Driver (ACPI) driver.  Failed to install (even after the course properties of the driver compatibility Vista file and selecting run as administrator).  Interestingly, Device Manager reports that the ACPI peripheral system Dell0100 utility works properly...

  Chatted with Dell Technical Support and they said to try to install the driver of Quickset M2010 page.  Installation message: "this is not a supported system."

  At this point, I guess that there is not a driver to get the manual eject button to work with Windows 7.  Are there the same system and OS with the functioning of the eject button?

  I had the same problem for years and by trial and error solved via update drivers, it was either the driver 'Intel DELL0100 proximity sensor Driver (ACPI)' proximity in the pilot game System Utilities or the "Cypress Semiconductor media touch button panel" in the set of Chipset drivers.

  Search drivers for model 2010 in Dell support section (or enter your service Tag #)

  After I updated those drivers, touchpad for media/volume started to work fine in Win7

• Mouse buttons works only with Windows 7

  Just returned from holiday, everything worked before but I try logging on to windows, and when you are prompted to select the profile that I cannot, after a while I finally get in but can not select anything on the desktop either. After a while, I start to use my keyboard so I not found this isn't my PC that freezes or whatever it is that it works fine, I can change on my mouse to another and get the same thing. Basically, the cursor works, but when I click on open areas/icons or just click on the buttons with that I get no response, even right click, I had a few moments for a few minutes where he worked, but have really no idea of why it works and why it doesn't.

  What works changes whenever I restart apparently.  Once I have restart and the left and right click of mouse buttons were functional full on taskbar, but nothing else, right now they do not work on the bar of tasks/all programs but you can click on anything on the desktop and open

  Both have been wired mouses, I mainly use the G5 wired mouse, point updated all drivers and still have the same result

  Hi MJKR,

  Try these steps and check the result.
  Step 1: Check in safe mode
  a. see start your computer in safe mode
  b. connection to the problem user account and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, then try to clean boot
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Step 3: If the problem persists, restore the computer to an earlier time
  a. Click Start, type system restore in the search box and then in the list click on the system restore program.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  e. restart the computer and check if the problem persists.

  See What is system restore?

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Click right button works only with Windows 7

  My right click button does not work with Windows 7. I had problems with the new cases, but with the help of your part which has been resolved.

  I fixed it!

  When I went to the control panel and the mouse, instead of searching the Internet for the latest update, which it said I already had, I went to my own PC and downloaded the driver and it works now.

  Thank you for your help.

• Age of Mythology Gold Edition works only not with Vista 64

  Ok. Same computer. Different operating systems it works very well. It is a problem of Vista 64. When I start Age of Mythology or Age of Mythology Titans he keeps asking the number of CD 1. This version came on a DVD. Even if the DVD is in the DVD player I am always asked the same question. What is going on? How should I do? Oh! The other operating system, I've tried is 32-bit Windows XP. Yes it is a 64-bit computer.

  For those who are interested,
  I tried all the proposals by Gloria. No worked. There is no update I can find on the Microsoft Web site. So! If you want to use your Windows XP games, you need to do. It is still possible to run the 32-bit of Windows XP on a 64 bit system. I created a system boot duel using Vista 64-bit and 32-bit of Windows XP. The system is set to boot Vista normally. You can select Windows XP 32 bit on startup when you want your 32-bit games. I was forced to do it with my MSTS as well. I have a control RailDriver. There can be no drivers 64 bit at the time of writing.
  The foregoing is shared so that others can benefit form, what has been done. By the way. Not all 32-bit games need this treatment.

• Help button works only on firefox. How to fix?

  Help button does not.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• all the buttons work only not on the monitor source except the space bar

  I just downloaded a trial of adobe first cc 2015 but unable to do all the regular stuff in my source window. all buttons are unresponsive except the space bar (it will play the file). I can also drag the video in the timeline, but still unable to make other edits using the buttons... any ideas anyone?

  Try this:

  Restart your computer, hold down the shift + alt key while opening the first up to the Welcome screen.

• PREVIOUS FLV Playback button works only once...

  Hi all..

  I have a FLVPlayer who plays a video and once the video is finished playing, is the BACK button. When you click the REPLAY button the movie again... Everything works fine, except the REPLAY button does work once... sense, once the film played only once and BACK button is cilcked to play again, after that the film is done playing for the 2nd time - the button does not appear... Fact, anyone has an idea on why it's perhaps? any help would be great appreciated. Thanks advance! Here is the code:

  Fl.video import. *;
  import flash.display.MovieClip;
  
  var myVideo:FLVPlayback = new FLVPlayback();
  var mybtn:myBtn = new myBtn();
  var staticpic:staticPic = new staticPic();
  logo: Logo of var = new Logo();
  
  myVideo.source = "BatterypoweredFCM.f4v";
  myVideo.skin = "SkinOverPlaySeekStop.swf";
  myVideo.skinAutoHide = true;
  myVideo.skinBackgroundColor = 000.
  myVideo.skinBackgroundAlpha =. 5;
  myVideo.width = 960;
  myVideo.height = 540;
  
  DropShadow
  function init() {}
  var dropShadow:DropShadowFilter = new DropShadowFilter();
  dropShadow.distance = 4;
  dropShadow.angle = 90;
  dropShadow.color = 000.
  dropShadow.alpha =.5
  dropShadow.blurX = 10;
  dropShadow.blurY = 8;
  
  logo.filters = new Array (dropShadow);
  }
  
  mybtn.x = 515;
  mybtn.y = 259;
  mybtn.Alpha =. 8;
  
  staticpic.x = 480;
  staticpic.y = 270;
  staticpic.Alpha =. 4;
  
  logo.x = 37;
  logo.y = 11;
  
  myVideo.addEventListener (VideoEvent.COMPLETE, completePlay);
  mybtn.addEventListener (MouseEvent.MOUSE_UP, proofreading);
  
  function completePlay(e:VideoEvent):void {}
  addChild (mybtn);
  addChildAt(staticpic,0);
  removeChild (myVideo);
  }
  
  function replay(e:MouseEvent):void {}
  addChildAt(myVideo,0);
  myVideo.play ();
  mybtn. Visible = false;
  staticpic. Visible = false;
  }
  
  addChildAt(myVideo,0);
  addChildAt (logo, 1);
  
  init();

  because you do not visible mybtn and you're never change that.  use:

  Fl.video import. *;

  import flash.display.MovieClip;

  var myVideo:FLVPlayback = new FLVPlayback();

  var mybtn:myBtn = new myBtn();

  var staticpic:staticPic = new staticPic();

  logo: Logo of var = new Logo();

  myVideo.source = "BatterypoweredFCM.f4v";

  myVideo.skin = "SkinOverPlaySeekStop.swf";

  myVideo.skinAutoHide = true;

  myVideo.skinBackgroundColor = 000.

  myVideo.skinBackgroundAlpha =. 5;

  myVideo.width = 960;

  myVideo.height = 540;

  DropShadow

  function init() {}

  var dropShadow:DropShadowFilter = new DropShadowFilter();

  dropShadow.distance = 4;

  dropShadow.angle = 90;

  dropShadow.color = 000.

  dropShadow.alpha =.5

  dropShadow.blurX = 10;

  dropShadow.blurY = 8;

  logo.filters = new Array (dropShadow);

  }

  mybtn.x = 515;

  mybtn.y = 259;

  mybtn.Alpha =. 8;

  staticpic.x = 480;

  staticpic.y = 270;

  staticpic.Alpha =. 4;

  logo.x = 37;

  logo.y = 11;

  myVideo.addEventListener (VideoEvent.COMPLETE, completePlay);

  mybtn.addEventListener (MouseEvent.MOUSE_UP, proofreading);

  function completePlay(e:VideoEvent):void {}

  addChild (mybtn);

  addChildAt(staticpic,0);

  removeChild (myVideo);

  }

  function replay(e:MouseEvent):void {}

  addChildAt(myVideo,0);

  myVideo.play ();

  removeChild (mybtn);

  removeChild (staticpic)

  }

  addChildAt(myVideo,0);

  addChildAt (logo, 1);

  init();

• Button works only with firefox version 41.0.1 back

  I'm running my gwt application using wild-fly. When I run the app on Firefox latest version, the back button does not work. It was working fine on all earlier versions. It still works very well on all other browsers.

  Is there an add-on that I need to install separately? Is there a setting that can make my application compatible with the current version?

  Apparently Google updates GWT address something related to the preference of dom.url.getters_decode_hash : http://stackoverflow.com/questions/32840678/gwt-in-firefox41-repetitively-encodes-token-in-url