Feeling stuck in a stone

Similar Questions

• Touch pad feels stuck and won't click.

  After only having my computer for about a year, maybe a little less, my trackpad stopped physically. It might still work, but wouldn't the sound clicks or have normal movement. After a few long conversations with the apple support where I did, SMC resets and PRAM reset, it enabled or disabled, checked the settings and reset preferences, (who has sense only if the software does not work) but it's clearly a hardware problem where something was not moving in its normal capacity, I finally decided to try a few things myself and solved the problem. I thought that I would write this article to help someone of you in the same situation. The first thing I did was closed the computer. Then, I stood the computer on its side (ie. the power supply on the table) and lightly tapped the back behind the trackpad, trackpad itself and all around the trackpad. Then, I turned the computer so that a different side was laid on the table and repeat the steps above. I suspect the trackpad starts to move, a little at first, then more freely that I adjusted the positions. According to me, the trackpad probably received little dust or other debris in the time and light by tapping gently released the mechanism. Since then, I have had no problems. Hope this helps!

  Wow! I'm happy that I saw it. Literally, my 'problem' lasted for 10 minutes until I found this. I did exactly as you said, and the problem disappeared quickly.

  Thank you very much!

• Satellite 1110-Z12: CD-Rom drive will not play copy controlled CD

  Hello

  The CD-Rom drive in my Toshiba Satellite 1110-Z12 (bought 01/2003 in Holland) becomes completely unreadable when I insert a CD protected by "Controlled copy" (IFPI). And I mean, berserk, he upped power at an incredible speed of spinning - very strong - and afraid he will break down.

  These are mainly EMI productions such as:
  -Norah Jones: Feels Like Home
  -Joss Stone: The soul Sessions.

  I know that these copy protection systems can never break or damage the use on CD players (standalone or computer).

  How can this be repaired? I never found the firmware update for the CD player on the Toshiba site.

  As much as I m did know, is it possible that the General of music that are "Controlled copy" by IFPI do not work in the drive of your laptop.

• Do not understand the point of layout mode...

  I'm afraid it will make me look like an idiot, but... I just don't, so well, I'm missing something.

  Here's my situation: I have two USB MIDI devices connected to my computer, an edrum with 8 pads and a keyboard 25 keys, touch 16 and a bunch of buttons. Both devices allow me to completely configure the MIDI channel, note, the key pads, etc. and so on.

  So, ok, in my APPLICATION I plug just those, create a track for each instrument, I want to play, say each track to listen to a particular channel for a particular instrument, and I'm all set. The keys on the keyboard go to the channel where the synth plugin is listening, keyboard on another channel where a sampler is listening, and keys edrum go to a third channel where Superior Drummer is listening, etc. My edrums me has even let press a button to change between "kits", altering what channel/notes sends each pad, so I can load up, say, multiple instances of Superior Drummer and switch between them on the fly. Large.

  MainStage has much latency better than my DAW, so I'm trying to switch, but after searching around here, and by reading the manual (where the "Connecting MIDI instruments" section is literally just a diagram showing how to connect a MIDI cable and nothing else), I still feel stuck. It seems that I have to start by loading a concert (either drums or keyboards, but not two and no option for a clean slate), then shove a virtual representation of one of my instruments has not been included in the concert I have loaded and then link each individual pad notes not only a unit, not just a channel, but a specific (ditto the high/low notes on the keyboard).

  Why am associating notes with pictures of the pads when the whole point is that the notes are generated by the real thing?

  Why can't just say 'send some signals come from channel 1 device edrum to this plugin', and so on?

  Why am I spent the time to mount images of a keyboard and 24 portions on my screen (surprisingly difficult) when all I care gets ratings generated by a physical device to sounds generated by a plugin?

  Why this strange intermediaries?

  I know that mainstage is very well regarded by people who know more about this kind of things I do, so what I'm missing here? If I use the wrong tool for what I want to do, any suggestions for what I should try instead?

  Hello

  usernamenumber wrote:

  Why am associating notes with pictures of the pads when the whole point is that the notes are generated by the real thing?

  Why can't just say 'send some signals come from channel 1 device edrum to this plugin', and so on?

  Why am I spent the time to mount images of a keyboard and 24 portions on my screen (surprisingly difficult) when all I care gets ratings generated by a physical device to sounds generated by a plugin?

  If I understand the situation, all you really need to do is get rid of any control layout, you don't want, create the MIDI activity 2 monitors (1 for the keyboard, the other the drumpads), assign entries noon then label 2 devices for clarity.

  In edit mode, just do as you describe: assign one controls the activity of MIDI to a particular slice.

  TDC

• Satellite P300 - recovery after bad crash of HARD disk

  Hello

  I have this Stellite-P300 - 1 H 8, who has had a bad HARD drive crash a few days ago.
  The primary partition of the 'system' has achieved so badly that my office he detected in RAW, no NTFS format.
  I bought a new HARD drive and managed to clone the content (some sectors were defective), now I have two options at startup:
  -Start windows the normal way, which ends with a reboot!
  -Recover, ending with a nice dialog telling me the recovery program could not start...
  I feel stuck and I would like to continue to use the original copy of Vista that is on the hard disk, what can I do?
  TIA

  Sergey

  Hi Sergey

  I presume you didn't create recovery DVDs, right?
  This disc you can install original Vista again.

  If nothing helps, you can order it on https://backupmedia.toshiba.eu/landing.aspx but I recommend you to install Win7. I did this on the P300 brothers and it works perfectly on this machine.

• HP ENVY 360: Need to update driver on the new laptop to run graphics - computer says contact Lim

  I just bought a new HP laptop and I am trying to run a new application of video game that says I have an error AP301... apparently the driver on my system is later and only available at HP as a custom product - I would like to upgrade to the latest Intel driver but the Intel guys send back me to HP because the driver on my repressive owns HP...  I feel stuck... any suggestions?  Scott

  Here's what you need to run FORZA Motorsport 6: Apex. You need 2 GB dedicated and your video card has 128 MB dedicated.

  The GT740 is minimal and the Intel HD 520 is much less powerful:

  http://www.game-debate.com/gpu/index.php?gid=3285&gid2=1247&compare=intel-hd-graphics-520-mobile-vs-geforce-gt-740m.

  In other words, it is a challenging game that will simply not play on your computer. The game requires a new driver because it detects that some functions it must run are not taken in charge and on some video cards, a driver update will correct this, but your problem runs deeper than a few drivers way.

  Forza Motorsport 6: Apex system requirements

  	Minimum	Recommended (1080 p at 60 frames per second)	Ideal (4K at 60 fps)
  OPERATING SYSTEM	64-bit version of Windows 10 1511	64-bit version of Windows 10 1511	64-bit version of Windows 10 1511
  Processor	Intel Core i3-4170 3.7 GHz	Intel Core i7-3820 @3.6 Ghz	Intel Core i7 - 6700 k @ 4 GHz
  GPU	NVIDIA GeForce GT 740 AMD Radeon R7 250 X	NVIDIA GeForce 970 AMD Radeon R9 290 X	NVIDIA GeForce GTX 980ti AMD Radeon X fury
  Disk space	30 GB	30 GB	SSD + 30 GB
  RAM	8 GB	12 GB	16 GB
  VRAM	2 GB	4 GB	6 + GB
  DirectX	DirectX 12	DirectX 12	DirectX 12
  Suggested entry	Xbox controller 1	Xbox controller 1	Xbox controller 1

• have items in print that yet nothing will print

  I have 11 elements in print that yet nothing will be printed. Running the program utility troubleshooting and rebooted the printer and laptop computer, but still no action... I'm pretty ignorant when it comes to computers, so no response no matter how simple or Basic is welcome

  Hello

  Once you have a "job" stuck in the stone of printing do not print, the next print jobs only join as a stone and do not print either (it's like a logjam in a Cove; they keep piling up).

  You must remove all of the stone and start over.

  If the problem persists, uninstall and then reinstall the printer by following the advice of the Web site of the manufacturer of your printer for your exact model printer.

  See you soon.

• Windows XP Setup hangs at «Setup starts Windows...» "after all the required drivers on the CD loading.

  My Pentium III 1.0 GHz computer (394 MB of RAM, disk hard 500 GB) crapped out on me after that I loaded soft PicturePerfect of Nikon.  For some reason, the Nikon software ruined my registry.  Now, whenever I turn on my PC, I get the BSOD with error "Unpaginated IPF in space".   I can't start my computer in safe mode or "start Windows normally" as I get the same error msg almost immediately without seeing the Windows logo and progress bar.  I can start my PC using the "last good known Configuration" and he will be starting the Microsoft Windows logo with the progress small downstairs bar, so I know that the hard drive is fine.  Then the screen goes black while WinXP is loading from the hard drive, and then the BSOD with error page comes up.  I suspect that there is incorrect data in a critical area of the drive where Windows requires data start correctly.   In the meantime, I can't boot into Windows at all because all Windows options lead to BSOD with the msg of error page.

  I resigned myself to reloading Windows XP from scratch, but I can't seem to get my original installation CD to not work.  I've reconfigured my BIOS to Boot CD, and then start the original Windows XP CD.  He reads and load it all very well, and then it hangs at «Setup starts Windows...» "I thought he had to test the equipment, but it remained in this State for 3 hours!  The "Welcome to Windows Setup" screen never came.

  I thought to use FDISK to the new drive of 500 GB and formatting on the errors on the hard drive, but I can't do since I can't complete the installation process.  I feel stuck in a bad situation where I can't enter BACK to FDISK and FORMAT my C: drive.

  Pls help!

  Thank you!

  Here's what I did and learned:

  1. I replaced my DVD burner with my CD - R original delivered with the machine and disconnected the 2nd CD - R.

  2. I disconnected my 2nd hard drive, in part to minimize the current of the power supply, but also to keep clean and simple start between a (hard) C: and D: (CD - R) drives.

  3. I re-tested my SDRAM using test mode full and deep.  To my surprise, I found not 1 but 2 SDRAM bad!  I replaced the original SDRAM 128 MB and re-directed tests of memory with the Diagnostocs memory of Windows and Memtest86 +.  All the 512 MB of RAM is perfect now.

  4. I started to new WinXP and have the msg «Setup starts Windows...» ».  This time, I waited for about 15 minutes and to my surprise the configuration screen came!  There is a long period of time between the msg «Setup starts Windows...» "at the start, and when the configuration menu actually comes to the screen.  I was able to partition and format my hard drive.

  Lessons learned:
  -Maintain the number of devices to a minimum so that it keeps unknown hardware failures to confuse the troubleshooting questions.
  -Test the RAM in deep test mode is important and test several times.
  -It could be more than 1 Bank of RAM can be bad so carefully test RAM.
  -Wait for the next Windows installation menu.  It is not instantaneous, but it will come sooner or later.

  Thank you!!!

• Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

  Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

  Hey Joe,

  Try duration to remove print jobs to remove Job feel stuck in the queue, and then restart your computer.

  Also refer to:

  Cancel printing

  Maybe you have that impression break.

  View, pause, or cancel printing

  You can also see the troubleshooting steps in Dell for Dell printers.

  Please post back with the State of the question.

• Help blackBerry Smartphones impossible installation that Curve 8310 - email

  Well I have Aproblem and I feel stuck, so I need help. I fight a second hand curve 8310 and it seems still had the old users email attached to it. I know this because as soon as I signed up for the BIS, told me he already has an e-mail address associated with the device and I have also received emails that were not mine. However, I wiped the phone and delete email addresses by going to options-anvanced options-book. Which lead me to no longer receive emails from old users and I thought that I could set myself up now. However, I have tried and have always error indicating that the device already has an email associated with it. I contacted the owner who said that she would call cingular and delete. She told me that she called twice and they say that the e-mail address is is more associated with my pin code. I keep trying the installer and your email address and I even wiped the phone and removed the battery several times but always the same message on the existing email address. My provider says that when they check the system, it still shows the device attached to cingular and they cannot make any changes to that. They say that cingular for this.

  I contaacted ^ previous owner again and she said she will talk with them again. Is there another way I can clear my PIN and set up my access to e-mail? Please, someone must know another way because it's been a few days now and no access to the e-mail for me on my Berry.

  Hi and welcome to the Forums!

  Nope - the carrier is prior must release the ANKLE of their system... There is no other way.

  FWIW - This is the recommended procedure for buyers and sellers of used BB...

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB05099&SLIC...

  Good luck!

• Hi, I'm trying to contact Adobe directly. Someone their e-mail?

  Hello
  I'm looking to connect directly with Adobe, since I had to download my old version of Photoshop CS2 again, after a computer virus and the cleaning of the computer.
  Now he tells me that there is no link activation via a server available, and the telephone activation phone no longer exists or the other.
  CS2 asks me to activate the software and now I feel stuck, because Adobe does not offer such an activity any longer.
  I tried to activate CS2 several times and now I have five days left to activate.
  How can it be, pay all that money and now simply because the version is old it won't let me activate again.
  Someone there direct e-mail to adobe or could help me with this problem?
  Thank you.

  Uninstall your current product. Then download a new installer and no serial here: http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l Installer and serial of this page replaces your old installation and serial No.

• Publish DITA with DITA-OT content or save as PDF?

  Hi mentor users and lovers of DITA

  I would ask your opinion at publishing DITA content to PDF format, with either DITA-OT or Adobe PDF.

  It's my first project of DITA and I was test and play with two options but feeling stuck as I can't decide which option to go with.

  Both the DITA-OT or save as PDF will require some changes, so I rather do things the hard way, then have to go back and create a new publishing model later.

  
  Thank you and best regards

  One of the big reasons using FM for creating DITA files is to be able to take advantage of its superior quality and capabilities of PDF publication layout. With the help of the OT (and XSL - FO) will produce very generic output... give it a try, but if you are specialized in the development of FO, you will have a very steep path down this road.

  You should be able to implement the process of publication by default FM quite easily, and you will get much nicer output.

  If you want to simplify the publication of basic FM by default, you can take a look at DITA-FMx (a tool that I produce)...

  http://leximation.com/DITA-FMX/

  See you soon,.

  Scott Prentice

  Leximation, Inc..

  www.leximation.com

• Why aren't my Muse paragraph styles recognized by Business Catalyst than CSS?

  We went to the Muse for site creation so that future designers can always build sites here when my colleague leaves, while I was looking at how to integrate a blog Business Catalyst existing muse and found this tutorial: building a Blog with Business Catalyst and Muse

  The problem is, I followed his instructions, but Business Catalyst is not recognize the Muse paragraph styles, so that I can use them as he did in the tab to develop in British Colombia update the appearance of the blog to match the site. I really need help! The client won't be happy if I can't do that getting up and running. I feel stuck between Business Catalyst and Muse, and nobody seems to be able to help me or has had comments on the same problem. a new version of Muse made disappear with the conversion of Para. CSS styles? Is there a way to get around this?

  Hello

  This can occur if you use a different module template and ask the Blog modules, or if the elements html format so defined in the module configuration.

  Please make sure that no format is set to the end of BC for Blog and then you should see the style that you have added in Muse page.

  If you need detailed assistance, please join our live chat team and they will help out you by removing any additional format has been added to your Blog site module.

  Thank you

  Sanjit

• Output only selected lines columns on a row

  Hi all!
  
  This is my second post and I hope that I have the time I post this topic where it should be... :D
  
  I HAV hurt with the release of the rows or columns. I searched the forum, but so far I've not found anything that can help me. (or I found, but not understood that I found... ;)))
  
  Here is a short version of my 'problem '.
  Table "transp":

  time          assigment          chain          link
  01:14:15     1111               Out          A
  01:14:25     1111               Out          B
  01:14:35     1111               Out          C
  01:14:45     1111               Out2          A
  01:14:55     1111               Out2          B
  01:14:05     2222               Out          A
  01:15:05     1111               Out2          C
  01:15:15     2222               Out2          A
  01:15:15     2222               Out2          B
  01:15:15     2222               Out2          C

  Desired output:

  Assigment     Time when Out+A          Time when Out+B          Time when Out2+C
  1111          01:14:15          01:14:25          01:15:05
  2222          01:14:05          -               01:15:15

  As you can see, I'm not all combinations of published chain stitches. I want to only publish those selected. To resolve I checked if the two conditions are met (1), and if they are (1 + 1 = 2) I take the time to corresponting. (get code below)
  
  This is the code I tried with:

  select assigment as "Tr-assigment",
  to_char(decode((to_number(decode(substr(chain,1,3), 'Out',1,0)+decode(substr(link,1,1), 'A',1,0),'99')),2,to_char(xuptime,'HH24:MI:SS'),'-')) as "Starting",
  to_char(decode((to_number(decode(substr(chain,1,3), 'Out',1,0)+decode(substr(link,1,1), 'B',1,0),'99')),2,to_char(xuptime,'HH24:MI:SS'),'-')) as "On wagon",
  to_char(decode((to_number(decode(substr(chain,1,4), 'Out2',1,0)+decode(substr(link,1,1), 'C',1,0),'99')),2,to_char(xuptime,'HH24:MI:SS'),'-')) as "Finished"
  FROM transp 
  GROUP BY assigment, chain, link, time
  ORDER BY assigment

  Output current:

  Assigment     Time when Out+A          Time when Out+B          Time when Out2+C
  1111          01:14:15                         
  1111                            01:14:25          
  1111               
  1111          
  1111          
  1111                                        01:15:05
  2222          01:14:05          
  2222                    
  2222                    
  2222                                        01:15:15          
  .....               

  Does anyone have an Tips how to solve this problem? I feel stuck and starting to get the feeling that I think quite wrong... (I am quite used to think bad sense, but thit once it starts to get enying.)  ;))
  
  P.S. actually about 400,000 lines in the table and columns about 30.
  
  Thanks in advance!
  
  Best regards / Anders, Sweden
  
  Edited by: blossa 01-sep-2011 22:38
  
  Edited by: blossa 01-Aug-2011 22:47 (try to get a better view of the output-examples)
  
  Edited by: blossa 01-sep-2011 22:49
  
  Edited by: blossa 01-sep-2011 22:50

  Try this

  select assignment,min(decode(link||substr(chain,1,4),'AOut',time)),min(decode(link||chain,'BOut',time))
  ,min(decode(link||chain,'COut2',time)) from transp group by assignment
  

  simply using min but anyway hope has, OUT B, C OUT2 are unique for assignment

  Published by: Leonard on 1 Sep, 2011 23:10

• Looking for advice on what to do now.

  I spent each working of free time between flash, fireworks, and Illustrator for quite awhile now.  I spent every night after work in collaboration with lynda.com tutorials.  It's been great.  My goal was to learn all the basics of web site design.  I even created a complete and thirty layout in fireworks.  The problem is that I feel stuck now.  I do not see the apps play nice with them.  At least when it comes to export the full site designs from one application to another.  I took an example fxp file and there more Fireworks to the catalyst.  He looked at all kinds of messed up.  The Fireworks to Flash was that less messed up but still unmanigable.  Complete the sections where screwed up.  So I was wondering what process to use to move from one application to another.  Essentially to get all the items you need while not fubaring the layout.  Should I just do little things and then export them in one of the applications.  I have no real idea about the direction.  My goal is to take the site I have developed in fireworks and add a few small flash between the catalyst and the main Flash content.  I want to do all this while trying to not destroy what I spent months in Fireworks.  Any help woul be nice.

  Most of the web stes have three designs different page - design home page, content page design and design notes pages. The other pages are simply copies of one of these three. Therefore, when you design a site in Fireworks, it makes your job a lot easier to do only three. They are not web pages ready. A few models. Those of us who have done web design for a period of time (12 years in my case) build pages the finished with slices of image we have exported from Fireworks in Dreamweaver. Fireworks was never intended to be used as a WYSIWYG editor. In my view, it is moving in that direction, but has a way to go yet. Do yourself a favor and learn how to use Dreamweaver as your homebase for Web development.