Do not understand the point of layout mode...

Similar Questions

• my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  Hi dove2k,

   

  Welcome to Microsoft Answers Forums.

  You will need to enable the touchpad on the laptop itself.

  Find the area of the touch pad, you will find a button to enable or disable the touchpad.

  If the step above doesn't, try this step.

  Go to control panel > mouse > device settings tab
  Click (or to disable)

  

  Notes:
  On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, ACER, just do Fn + F7.
  You can click on Reset device if none of these solutions work.

  If you still can't touch pad to work, you will need to contact the manufacturer of the laptop computer for more information.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I printed just a pdf and he did not understand the polylines I had traced.  What has caused this?

  I printed just a pdf and he did not understand the polylines I had traced.  Why?

  Hi Gary,.

  Please try this: -.

  • Click the print or choose file > print to open the print dialog box.

  • In the print dialog box, select Document and annotations in the drop-down list of forms and comments.

    

    I would like to know if it works.

    Kind regards

    Nicos

• VLAN real PowerConnect base for beginner who does not understand the trunks etc.

  I have several switches Dell powerconnect 3548 and 5548 deployed on my network to install multi that I'm managing their individual DNS names.  now, I've added a voip phone system that works on my network, but to a range of ip addresses completely different to another server.  So, I want all my switches divided into 2 VLANS.  The basic vlan 1 will always manage the switches and all ports and the vlan voip will have its own set of ports on the second VLAN.

  There is no visibility between the VLAN, just different IP addresses different server DHCPd, s so if your clogged in the vlan 1 are you a PC/printer/etc with your own default gateways defined by the field.  If you are connected to one vlan 10 you are a phone and you will get your information from an edgemark server somewhere else.

  so step by step (if you want to give me even better orders) I have actually need it to configure to create a vlan separate and independent who will seek dhcp by an existing voip to its home network device to, while I can still manage my management ip switches.  I understand not all the vocabulary of trunking and I don't know if it needs anything else including marking, because are is all autonomous.  I guess I need a guid for Dummies at vlanning powerconnects.

  VLAN datbase
  VLAN 10
  end

  Interface vlan 10
  name voip
  end

  e1 serial interface, e14
  switchport mode private vlan community?

  Here is an example:

  Console (config) # data vlan

  VLAN console(config-VLAN) # 10

  Output console(config-VLAN) #.

  Console (config) # id vlan 10 voice

  Console (config) # voice vlan Yes add XX

  Console (config) # int 1/0/1 gi

  Console switchport mode trunk #.

  Switchport trunk console # permit vlan remove 10

  Activate console # vlan VoIP

  Console # end

  Here is a white paper for configuration Dell PowerConnect 55xx series switch voice VLAN:

  en.Community.Dell.com/.../Configuring-Dell-PowerConnect-55xx-Series-Switch-Voice-VLAN.aspx

  Page 557 of the CLI Guide begins the discussion for orders of VLAN on the switch 5500 voice.

  http://downloads.Dell.com/pages/manuals/PowerConnect-5548.html

• I do not understand the information on my graphics

  Hi all

  In fact I do not understand that it means everything, it says that I have
    

  1204 MB total available graphics memory

  128 MB dedicated graphics memory
  0 MB dedicated system memory
  1076 MB shared system memory
  What is the actual information on my graphics memory? What is 128 MB or 1 GB
  If its 128 MB is not why I use total memory available as shown above?
  And if the 1 GB graphics, why I can't run games of good quality?
  Above is the real screenshot of information

  [EDIT: post your complete specifications at the beginning is always useful-]
  I see now that there may be different versions of the Acer Aspire V32-471, and some of them have
  a dedicated graphics card and a respectable card to this (see the link at the bottom of page) - GT 640 M 2 GB apparently.
  If yours is one of them you probably have not activated the card.
  Read your user manual to learn how to configure the machine automatically (or manually
  If applicable) switch between HD4000 and the dedicated card. ]

  "Don't tell my computer cannot be upgraded.
  -Even laptops that come with a graphics card are not usually extensible, and
  When they are, it is not economically viable because of the cost of the upgrade card.
  [ EDIT 2: the only kind of notebook computers in which you can upgrade graphic is are those who use MXM cards.]
  Even in this case, it may be difficult to get a card that has a fit right, so for all purposes useful
  a laptop is not extensible. ]

  As you have an integrated graphics Intel HD4000. This is not a graphics card. HD4000 is
  a form or the integrated graphics card. In this case, it it is not part of the cpu.  Older integrated graphics have been
  in the form of a chip on the motherboard
  A dedicated (as a separate card that attaches to the moterboard) graphics card uses what is called
  VRAM which is a real dedicated graphics memory.

  Acer has apparently allocated a fixed amount of RAM to (dedicated), while allowing up to 1 GB be accessible 'dynamic' held by a game or other software that uses the HD4000.
  So in this case the extra 896 MB of system RAM in this case would be called "shared" RAM
  As long as you're not multitasking while games the HD4000 should be able to access any
  full 1 GB of RAM.

  Laptops are configured differently to PC and they have different methods between mfg
  Some have a software that allows you to change the amount of RAM allocated to the integrated graphics card.
  and some may have an option in the BIOS, as does my PC to allocated different amounts of RAM to
  the HD4000 graphics.

  However, as others have mentioned, the HD4000 has limited capacity vs a high mid range
  graphics card.  It is one of the best onboard graphics at this time (recently after having been replaced
  with Intels new cpu), but it is still limited.
  If you had to be able to book or devote more RAM graphics system he probably wouldn't
  improve performance much to the resolution you are using.

  A few points for your graphics below - note that there is a small difference in
  different between laptop frame rate makes and models.
  http://www.notebookcheck.NET/Intel-HD-graphics-4000.69168.0.html

  Compare with GT 640 m-
  http://www.notebookcheck.NET/NVIDIA-GeForce-gt-640M.71579.0.html

  .

• I have reset firefox and now everything is sitting on my desk. I want to again on my firefox profile, but I do not understand the directions on how to do it.

  Reset did not say I would lose everything--it seemed that most would still be preserved. I do not understand about the creation of the new profile, and copy everything on it. Is there an easier way to do this? I tried to restore my computer hoping that would bring back how it was, but that didn't work. I'm not an expert in computer so need baby steps on it. I have windows 7. Thank you.

  You are welcome

• On Satellite A200 error message: could not open the ACPI ATK0100 Kernel Mode driver

  Hello

  I have laptop Satellite A200
  When I run the windows (vista) I get the following error: * 'Can t open ACPI ATK0100 Kernel Mode Driver.*'!
  I installed all the drivers and the error remains.
  I installed all the drivers on the Toshiba site, but the problem persists.
  The Device Manager shows me that each device is working properly.

  Someone at - it a solution?

  Thank you

  ACPI is the installation of your Windows operating system power management. If this fails you may need to run a recovery system on your computer. You can do this with the hidden partition on your hard drive, but this will erase all data on your machine. If this does not resolve the problem, you may consider making your hard drive, checked bad sectors, as this may have failed.

  I hope this helps. :)

• Apple's music will not change the song on shuffle mode

  My iphone6 will not change the songs Apple music in shuffle mode. Once selected the song again and again.

  Hello

  update your iphone to ios9.2

  Settings > general > software update

• Function editor does not support the pointer to the digital type

  Am I missing something or is it true that the CVI function Panel Editor does not support specifying a type parameter as a pointer of type number?

  I see no reason why he wouldn't or shouldn't.  It supports the pointer to char.  And it supports a table name (which, in C, is a pointer to the first element of the array).

  I guess I could use the array form as a pointer, but surely it's confusing when dealing with a simple pointer to a numeric scalar type.

  I am using the function Panel Editor only for the purpose of creating a dictionary of type so I can call functions DLL in VB.  Y at - he know somewhere how CVI types could are mapped to the VB types when you use the type dictionary?   for example, what happens if I use an unsigned int in a function parameter (VB does not support unsigned integers)?

  Menchar

  Hi Menchar,

  To create a pointer to an integer as a parameter to a function panel, you have two different options.

  First of all, all output parameters are defined as the default pointers.  So if you create an output parameter of type "int", he creates a ' int *' parameter.

  Second, if you want it to appear in the entry list, you can create a data type in CVI which will appear at the bottom of the list.  Data types to change your data types, go to the Options"(you must have a function Editor tab open and selected Panel to make this option available).  Enter the name of the type (in this case ' int * ') and click the Add button.  The new "int *" option should now appear at the bottom of the list.

  Third, you can use the array form (int []), but as you say, which can be confusing for other people looking at the code.  Or the other of the two first options are better choices.

  As for your second question, here's a link to a page MSDN showing types in Visual Basic and their representations .NET: http://msdn.microsoft.com/en-us/library/47zceaw7 (VS.80) .aspx.  This allows to make a comparison between VB and ANSI C data types.  For example, to ask on unsigned integers, and this site shows that Visual Basic has an Integer type (-2,147,483,648 through 2,147,483,64) and an unsigned return, UInteger (between 0 and 4 294 967 295).  From what I can tell, VB has signed versions of all its digital representations.  You can then take this with a list of ANSI C data types to convert between the two.  A list of ANSI C data types can be found here: http://www.exforsys.com/tutorials/c-language/c-programming-language-data-types.html

• I received a phone call from someone who said they were the Windows technical support. I did not understand the person that he was a stranger

  The person calling said he could give me a technical support for problems that they had detected with my computer, but he seemed surprised when I said that I had problems with my computer.  I did not understand a lot of what he was saying because of his foreign accent.  Can someone tell me what it is?  I don't think that I may have a virus, but Windows actually call for help?

  You were lucky that you could not understand him and so do not buy what he was selling.  It was a scam.  Microsoft does not make unsolicited phone calls.

  Insofar as thought, you could have a virus...

  • What version of Windows (XP Home, XP Pro, Vista, etc) and Service Pack (none, 1, 2, 3) is installed? If you are unsure, do a click right my computer and select properties for information.
  • What is the name and version of your anti-virus program?  Is his current subscription and has it always been updated?
  • What other security software is installed (names and versions)?
  • What are the symptoms?  That's what are you see you do not, you should see or what is you don't see don't you think you should?  Please report the full text of the error message without paraphrase.
  • What happened to your computer shortly before the symptoms started?  Power outage (including pulling them out the plug or by pressing the off button); use of a registry cleaner, optimizer, tuner, etc. ; installation of an update (only one?). Another thing that you can identify.

• Customer does not understand the purpose of the Service Packs

  I have a client and I have trouble explaining a question related to the objective of the SPs. Any comment is appreciated.

  The customer has a computer that runs an application with SP2 and creates a file on this computer. Then send the file
  a user to overseas using a computer with SP1. The user overseas to have problems with the file,
  try with another computer SP2 and everything is OK.
  I told the customer that the problem may be something in the file and it is not related to the compatibility of the SP1 - SP2. He
  insists that SP2 must be compatible with SP1. I tried to explain, Ms is not a new version, it corrects bugs etc...
  and we never talk about compatibility between SPs. SPs are not meant to create problems, it's to solve problems.
  I won't give the name of the application because it can see the post. He has now decided to roll all the computers
  back to SP1 I don't aggree with him.

  What do you think?

  Thank you.

  I think that the customer is a fool, and you need to stop doing business with him if he does not understand or accept what you say. Make sure he knows its computers run a serious security risk, and operational risk, and some programs may not work without the latest service packs, and it will be very expensive to repair.

• BIOS Inspiron 2305 does not detect the drive in ahci mode

  The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

  The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

  However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

  Can someone tell me what steps to take to do the installation?

  theFlash1932 and natacuk4

  Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

  I was able to boot the system several times and it seems that everything works fine.

  Thank you guys for helping me solve this problem!

• I do not understand the structure of files in lightroom

  I use ligtroom for a little while now, and I never really took the time to try to understand the structure of files in lightroom. Looking at it now, I'm totally confused.

  I'm on vacation and take tons of pictures and their import to my laptop (and an external hard drive).

  Since my trip is coming to an end, I'm wondering how to transfer all these catalogs to my office when I get home. Without messing up all the files that are already there.

  So I start looking at my Lightroom folders in my documents, and I like lightroom 6 6 develop records, 2 6 lightroom develop files previews.irdata, which I am unable to open and have no idea what is in them.

  And I have a folder on my desktop called new lightroom 6, which has a file called lightroom 6 in which has all my latest pix.

  How to consolidate this mess when I know not what is half of the files because I can't open most of them?

  Small question is - how to get catalogs and collections of my computer laptop lightroom app to my desktop lightroom app?

  Thank you

  Lightroom does not really use a file structure, it's a database.

  The photos must be in a folder somewhere in your operating system, and when you import a photo into Lightroom, the location of the actual folder and file name is entered in the Lightroom database, so now Lightroom knows where your photo.

  Now, I don't know it that all of these folders on your computer that you describe. You'll have to sort this possibility, somehow, perhaps by opening each folder Lightroom (not in your operating system) to see the benefits. Now, when you look in your operating system, you must find all the folders that contain pictures of Lightroom (you just find these files in the previous sentence), as well as the folder that contains your catalog and presets and preferences file. The default locations for these things and instructions to move your installation of Lightroom to another computer, are here: How can I move a computer to a new Lightroom?

• Why Photoshop and Illustrator (2015.1) still do not understand the other?

  When I do logo colored in artificial intelligence and then import it into PS, logo's as a unique raster object. Or if I export all my layers to HAVE .psd and open in PS, it's raster again. Is it possible to do full compatibility between these two apps?

  All vector objects to HAVE must come to the PS as a vector of shape layers with the fill color, races, gradients and vice versa. This problem is very old, but still not resolved. Need key designers to achieve this functionality - opening of forms as separate layers with all the attributes of appearance.

  I understand the characteristics you're looking for.

  Can you please report this as a request to feature here:http://feedback.photoshop.com/photoshop_family

  Concerning

  Jitendra

• after duplicating the LAYER, I'll EDIT FILL LAYER and can not find the NORMAL Elements 9 mode

  after duplicating the LAYER, I'll EDIT FILL LAYER and can not find the NORMAL mode

  The arrow keys did!  Thank you!