FF17 light twice?

I just upgraded to FF17. My problem is that when I double click on the FF icon and nothing happens. Wait and wait, but nothing happens. Then I double click again and I get two windows of FF. This has not happened before when I got FF13. What is going on?

Thanks, I checked that but it didn't work. What finally worked was looking at my task manager. It turns out that it was the Java that was causing the problem. I disabled it in FF, and now, I don't have the problem more.

Tags: Firefox

Similar Questions

  • Sony Bravia 4 K Ultra HD model XBR-43X830C & remote control RCC-TX100U - don't pair / work! Help!

    I bought (via Internet) remote control Sony RMF-TX100U touch pad to pair upward with my Ultra model HD Bravia Sony 4K 43 '' TV XBR-43X830C, since the remote control of the touchpad does not come with this TV in particular. I followed all THE procedures of paved remote reset touch that is to remove the batteries, batteries, hold down the respective buttons and receive the flashing red light (twice) on the remote control, I did. Also, I did reset the TV rather than unplugging it. On television, I went to settings, remote and followed the onscreen but which are basically press and hold the Volume - button and then press the "microphone" button while continuing to hold down the key, - Volume for three seconds, remote pointed at the IR receiver TV. I did it over and over again and nothing happens! I find NO Google search solutions to this problem. Can anyone advise of alternatives to get this remote touchpad to play nice with my Sony TV? I'm assuming that this remote is COMPATIBLE with this particular set? Some say yes, some say no. Please advise. Any help will be greatly appreciated. Thank you in advance!

    Doc technical marketing for your TV on the Sony site.

    https://docs.Sony.com/release//specs/XBR43X830C_mksp.PDF

    Shows:

    Optional accessories

    Remote control Touchpad (RCC-TX100U)

    Cable MHL (DLC-MC20)

    Subwoofer (SWFBR100) wireless

    4 K Media Player (FMP - X 10 (for the USA. only))

    Should work.

    Try to make a power-pull reboot... turn TV off, draw power for a minute, plug in and restart.

    Put different batteries in the remote control.

    Try again.

    If it doesn't work, distance could be faulty.

  • Satellite A215 - fault power

    Hello

    I have a Satellite A215 with what looks like a major problem.

    When I plug in the adapter I get 2 combination of LED on the front to come-
    Sometimes the area of ejection blue light twice then nothing
    Sometimes the sector and the battery light will Flash once then turn on flashes once and then nothing
    sometimes no LED light up at all.

    If the AC adapter is not plugged in about 5 minutes the blue power LED will be finally turns on and stays on.
    Computer laptop don't post, the power button has no effect.

    I tried to remove the battery, ram, HDD, modem and WiFi card so far.

    Anyone have any ideas?

    Hello

    You mean you can't turn on the laptop?
    Nor with the power or the battery using the AC adapter?

    Well, this seems odd and possibly there is something wrong with the electronic power on the mobo but it's only my personal opinion.

    You should try a workaround; remove the battery, disconnect the adapter.
    Then wait about 30 to 60 minutes and reconnect the two part.
    Try to turn on the laptop and test if the laptop would pass the POST correctly.

    If nothing will happen then a serious hardware failure could be possible and I think that in this case only the ASP can be useful.

    Good bye

  • G26 error - touchpad is disabled when using

    I recently received a notebook G26. The key sometimes disabled when using with the charcoal fire on and a dispay showing that the touchpad is disabled. Unlike some other modules, there is no button on the top of the touchpad that allow me to activate the touchpad. My questions are:

    (1) why the touchpad is disabled? A I hit a wrong key combination?

    (2) how to enable non-stop power?

    Thank you very much.

    BTW, does anyone know how to loosen the buttons on the touch pad, they are really difficult to click.

    The yellow light is the touchpad switch itself. Press the light twice to activate the lighting which allows you to use the touchpad again. You could hit during use. Not a good design for the laptop.

    There is no way to loosen the touchpad button...

  • Turned on, the red light flashes twice used to blackBerry Bold 9700 Smartphones

    Hi all

    Last night during the use of my bb bold 9700, it comes went away, came back and then my bbm (messenger) has been removed, so I tried the update of the OS which proved a failure, unplug my bb from my cell phone minutes later, it exploded and the red light blinking twice, charge all night and symptoms persist. can someone help me please.

    Thank you

    Remove the battery and leave it out for about 2mins. Insert the battery and see if works. If this does not work, you can try the update of the new OS but this time with the battery. When the process gets to "Loading Applications" insert the battery and let it go through to the end.

    I hope that you have a previous backup, you won't be able to recover your data

  • How can I fix my CD player that does not start spinning, however the green light flashes twice and the door opens fine.

    I recently got a desktop computer. It's an hp with Microsoft Windows XP. I don't understand not brand-new, but it worked when I got it. My children decided to "help" with a cd of one day and he has not worked since. It is not simply turn and nothing shows up on the screen as if I never put anything in the drive. I tried to open a file manually, but he just told me to insert a disk in drive D. When I close the door, it flashes twice, then nothing happens and it is completely silent. I'd appreciate any help.

    Sounds as if the reader does not, replace it and see what happens.

    "evil heart," wrote in the new message: * e-mail address is removed from the privacy... *

    I recently got a desktop computer. It's an hp with Microsoft Windows XP. I don't understand not brand-new, but it worked when I got it. My children decided to "help" with a cd of one day and he has not worked since. It is not simply turn and nothing shows up on the screen as if I never put anything in the drive. I tried to open a file manually, but he just told me to insert a disk in drive D. When I close the door, it flashes twice, then nothing happens and it is completely silent. I'd appreciate any help.

  • Light Magic mouse to the back of the mouse flashes twice intermittently

    What is the problem with my mouse, not connecting, the bluetooth is on but located at the back of the mouse flashes 2 times and is consistent in that regard, but no link...

    Reset the PRAM and SMC.

    Barry

  • I changed the ink in my printer, it worked twice after that, but now the ink lights. Does not print.

    The printer is an EPSON multy 3 in 1 NX100series Stylu.

    Contact Epson or check their support website to see what could be the problem.  This indicates a hardware problem with your printer, not a Windows problem.

  • White screen of HP Pavilion dv5 1002nr start-up and error code lights flashes twice, corrupt BIOS!

    Equipped with a corrupt BIOS, I struggle to try to replace the BIOS of the motherboard.

    The processor is a AMD Turion series.

    Question, can anyone tell me definitively when the BIOS chip is located on the motherboard.  It seems to be next to the RTC battery on a piece of white under layer in the cutting of a transparent plastic layer.

    Also, is this the only way to save the laptop from the corrupted BIOS will not work the POSITION for me to get into the BIOS to try to restore or update?

    It is laptop a grandson and grandpas still inherit this type of problems.

    I'd appreciate any help, instructions or information on this seemingly hopeless situation.

    Thank you

    You are right about the location of the BIOS chip, this is a chip of 8 spindles/leg next to the battery.  The only other option if you are sure it's bios is to replace the motherboard.  The bios chip is on ebay for $20 to $30.  I have the same problem with the same laptop and I think I'll just bite the bullet and replace the motherboard, if the problem was caused by overheating it could have other problems that surface after replacing the bios chip and you will be chasing ghosts.  The motherboard is also on ebay for $ 119 to $ 175, for the moment.  I hope this helps.

  • Qosmio X 870 - 13v - graphic problem steam L4D game - black shadow on the light

    Hello

    I play this game using 2 PC Toshiba laptop.

    A Satellite L670-1KZ: 2.67 Ghz - Radeon Mobility HD5650 - RAM 6 GB i5.
    A Qosmio X 870 - 13v: i7-3630QM 2.4 Ghz - GeForce GTX 670 M & Intel HD Graphics 4000 - 32 GB of RAM.

    On the 1st, I have no graphic problem.
    On the Qosmio, I have a BIG problem with little light that have large black stain on it.

    You can see the 'bug' on YT here below:

    https://www.YouTube.com/watch?v=c4E2DFScyfU&feature=youtu.be

    The configuration of the game is the same on both machines with the exception of the resolution.
    My drivers are up to date (GeForce & Intel).
    I uninstalled the game twice only = no results.
    Settings, to control panel Nvidia, I changed several times (Note option shadows cache) no = no results.
    I played with game config below only = no results.

    I posted on the forum of steam only = no response.
    I posted on the forum of Nvidia only = no response.

    So, can you help me solve this problem?

    With our thanks,
    Guillaume.

    You have any other graphic matter using this Qosmio X 870 - 13v?
    I mean other problems related to the image to appear in other games and other applications running?

    Otherwise I n t think that there is something wrong with the laptop.
    In this case, it looks like very specific issues between this game and probably the graphics driver.

    It turns out that you won't encounter problems under this game the Satellite L670 with ATI driver.
    The Qosmio is supported by the nVidia GPU

    I think there must be a link any between the nVidia GPU and this game.
    In my opinion you should look for the solution in the steam forums or nvidia even if you have not received answer yet.

  • HP Touchsmart 600-1050 - Light flashing - unable to Post

    I have a 600-1050 running Windows 7 TouchSmart I work for a friend.  He was surfing the web and said that when he clicked on a link in Google, the screen in black and ambient light began to blink.  I thought it was great, but of course, he was right.  As soon as you plug it in, the ambient light begins to blink approximately twice per second, very fast.  I'm guessing this has something to do with the power, but I don't know where to start or even if it is worth trying to fix since the computer is more than 4 years old.  I searched online and can't seem to find someone with a similar situation, so I hope that this forum is useful.  Thank you!

    The ultimate resolution for this question was intended to replace the motherboard.  Thank you for all your comments!

  • Pavilion dv6t 7000: failure of the BIOS (Caps lock flashes twice a secone)

    My laptop model number is Pavilion dv6t 7000. In recent days, he had a problem. When I turned off my laptop and put it off, the next day I find that is not starting. A black screen, caps lock shift is blicking twice and f12 key is red (WIFI). Nothigs happen. Then, I searched and came to know that it is the failure of the bios. Then I tried some way and nothings worked. ATLAST when I remove the cmos battery it set again after 2 or 1 minute its starts fine. Then againg I turn off the computer and its power day following again the same problem. I was to solve this problem by removing cmos battery and put it again for 4 or 5 days. But today this tip does not work. I tried so many method like (Windows key + B), (byholding down the power button for 1 minute), (Flash UEFI) etc. to solve the problem of failure of the bios, nothing worked at all. What is the problem?  Is this really a failure of the bios? How can solve this problem? What is a dangerous problem? There the chances that my laptop is completely exhausted?

    Hello
    beep codes or led lights will Flash at the start of the system may indicate a hardware fault or BIOS you say you have tried all the troubleshooting steps

    I would like to run the hardware check to make sure it's all working please follow the guide below for instructions and report:

    http://support.HP.com/us-en/document/c03467259#AbT1

    Tests using UEFI diagnostics and run the quick test

    Thank you
    James

  • Can someone help me to assign touch controls to lights and media player

    Hello

    Please can someone assign me the first two keys to turn lights on or off and open windows media player?

    Someone said that if I go into Toshiba Assist - optimize - Support Button Toshiba I can do here, but how? Anyone know?

    See you soon.

    If please don t post twice on the same theme and follow the first thread you created:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=41600&TSTART=0

  • How to enable/disable the touchpad light

    Hi guys, I plug this portable one week ago and I still don't know the functions.

    on the touchpad, you know when to click twice when his assets, he goes off and the red light right? and when you restart there is a white light around the touchpad, since yesterday this thing of white light stopped working, but the red light that lights up every time that I don't use touch pad not working very well. I don't know what the problem is with him... is it possible to enable or disable the focus light?

    Press FN + space key to toggle the touchpad clear emphasis on your laptop. If you want to read more info on your portable computer, refer to the manuals on here

  • No router light not showing

    Hello, I have a N300 wireless range extender and its does not work. Funny is that it seems to work.

    I followed the instrustions to the letter (twice), as well as my wife (when it is in doubt let the wife embark, right?) Then all the lights (except the light of router) and even the deivce bright lights when I try my wifi device. The device says even his connection and then says connected with full wifi signal.but the router light lights not so, of course, it does not connect to my router (a superhub Virgin 3).

    So, what's the problem? I've updated the firmware to 1.0.0.10 (I think that's what he says) and the Extender was about 3 inches of the router at the facility, but still no joy.

    Any ideas anyone?

    Problem solved! It was a bad blank superhub 1 that was causing the problem.

    Thanks for your replies

Maybe you are looking for

  • my tablet is slow

    Hello!! I have a hp slate tablet 7 and I am satisfied.But his "slow". Even when I open it, it takes about 60sc for launch! (it wasn't like this when I bought it). Any help?

  • XY graph is not displayed

    I have a problem with the graph xy is not showing do not. Tried almost everything I know. The graph will not just show the two tables. I tried to build an array of clusters in the chart, and that did not work. attached, that's what I'm trying to do.

  • Problem with timeout when connecting to wifi

    Although my laptop connects to other networks wifi (unsecured), it does not connect to my wifi network at home. The error message says that the wireless card has failed due to timeout. The Atheros 5700 card reports that it works correctly. I tried se

  • My Cyberlink YouCam has to a black screen and troubleshooting says it's not compatible with my Windows 7. How can I fix it?

    It worked and I tried to change the brightness and the screen went black.  The exposure setting is completely to the right and I can barely see an image.  Also, a pop-up came on compatibility, developed for Windows XP and I have Windows 7, so I click

  • error oxo windows 7 Home premium

    Hi I have error oxo code on my laptop, can't move the box that says windows about this problem. He then returned with unable to trouble and I'm stuck here, so impossible to restore or anything. Nobody knows how to help me please. Am a total novice.