FieldPoint configuration file

Similar Questions

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• Failed to read the configuration file. New installation on windows 7

  I just downloaded and installed firefox on my windows 7. No error on installation. When I try to launch Firefox I get this dialog box. Configuration - the configuration file cannot be read. Please contact your system

  administrator.

  Note that you must delete the Firefox program folder to do a clean reinstall to remove the file that is trying to access the mozilla.cfg file which probably does not exist.

• Using an automatic configuration file to create bookmarks

  I use an example provided by Mike Kaply to change my automatic configuration file to add bookmarks to the profiles of the users. However, whenever I run FF, instead of bookmarks should be replaced, I get an extra game. So after 5 revival, I have 5 sets of bookmarks that I added.
  Is there a way to avoid this?
  Here is the code I use:
  Add bookmarks
  Components.utils.Import ("resource://gre/modules/Services.jsm");
  var uri = Services.io.newURI ("http://mike.kaply.com", null, null);
  var navBook = Components.classes["@mozilla.org/browser/nav-bookmarks-service;1"].getService(Components.interfaces.nsINavBookmarksService);
  create new folder
  var FolderId = navBook.createFolder (navBook.bookmarksMenuFolder, "New folder", 0);
  Add bookmark to newly created folder
  navBook.insertBookmark (SCCCFolderId, uri,-1, "Mike's Blog");

  In the end, I had to write code using a loop with an if statement then look for an existing bookmark. Of course it's a little more complicated than that.
  It was not easy, but I am able to do what I have to.

• 25 Firefox is unable to read the configuration file on new install

  I try to install Firefox 25.0 on a XP - SP3 machine and receive the error "failed to read the Configuration file. Please contact your system administrator. I use a file to mozilla.cfg that I created and that you have applied to previous versions. The mozillia.cfg file has entries Pref lock, which are formatted as follows:

  lockPref ("Network.protocol - handler.external.shell", false);

  I have read discussions on various forums and the recommended fix seems to be a "clean reinstall. This machine has never installed Firefox, so a clean reinstall is not an option.

  As noted by one side this version of Firefox will be not to read the config on any OS file I tried Win7 or XP, I did a clean reinstall on both of these machines with the same results.

  I appreciate your help with this.

  If it helps, here is the content of my mozilla.cfg and local - settings.js.

  C:\Program Files\Mozilla Firefox\mozilla.cfg

  //
  
  lockPref("security.enable_ssl3", true);
  lockPref("security.default_personal_cert", "Ask Every Time");
  lockPref("network.protocol-handler.external.shell", false);
  lockPref("plugin.disable_full_page_plugin_for_types", "PDF, FDF, XFDF, LSL, LSO, LSS, IQY, RQY, XLK, XLS, XLT, POT PPS, PPT, DOS, DOT, WKS, BAT, PS, EPS, WCH, WCM, WBI, WB3, RTF");
  lockPref("browser.formfill.enable", false);
  lockPref("signon.autofillForms", false);
  lockPref("signon.rememberSignons", false);
  lockPref("dom.disable_window_open_feature.status", true);
  lockPref("dom.disable_window_move_resize", true);
  lockPref("security.enable_tls", true);
  lockPref("dom.disable_window_flip", true);
  lockPref("dom.event.contextmenu.enabled", false);
  lockPref("dom.disable_window_status_change", true);
  lockPref("dom.disable_window_open_feature.status", true);
  lockPref("browser.startup.homepage", "http://intentionally removed");
  lockPref("app.update.enable", false);
  lockPref("extensions.update.enabled", false);
  lockPref("browser.search.update", false);

  C:\Program Files\Mozilla Firefox\defaults\pref\local-settings.js

  pref("general.config.obscure_value", 0);
  pref("general.config.filename", "mozilla.cfg");
  

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• How to write the comma delimited numbers of configuration file

  Hello

  In the attached Configuration File.vi write, I am trying to crush several whole decimal in the keys 1 and 2 of the attachment Test.ini. I am to convert the array of integers in a string. Because of this, the string written in the ini file is now being bracketed by apostrophes. What should I do to write the string without the apostrophes, as in the Test old.ini file?

  I appreciate your help. Thank you.

  Best regards

  Peter

  See here:

  http://forums.NI.com/T5/LabVIEW/configuration-string-keys-in-LabVIEW-2009-changes/m-p/1147371#M50489...

• VI Analyzer "a few screws and/or essays have been added or removed from your file system because you have saved changed this configuration file."

  When I run VI analyzer and open our standard configuration file, the message "some screws and/or essays have been added or removed from your file since changed record system this file of configuration." appears. By clicking OK, choose something to analyze and move to the VI Analyzer - select the Tests, the selection of testing control dialog box is completely empty and the Analyze button is grayed out.

  I'm runing LabVIEW 2013 on Windows 7, VI Analyzer worked before and I tried repairing and uninstalling the LabVIEW program (then reinstalling) already. If I do not select a config file or try to reset all the test configurations, control of the Tests remains empty.

  Is it possible to restore the tests or difficulty just the VI Analyzer toolkit?

  The only thing I remember to change since I ran last parser is that I installed the tiara.

  Most likely someone accidentally moved the test record THROUGH by accident

  VIA installs like a Toolbox and would not repair with just a LabVIEW installation

  You could re - install Media Developer Suite if you have that in the opposite case:

  Or the other

  Change > getting started window or

  Tools > find a LabVIEW Addons

  will launch the search VIPM tool

  Search for VI Analyzer

  Download and install

• Cannot deploy when you use the FPGA configuration file

  Hi all

  I'm new to NI Veristand. We use a controller NIPXI 8108 with a map of FPGA OR 7841R. Is the used chassis OR PXI 1042 q. VeriStand does not deploy, when we try to add the target FPGA. For adding, we used the default for NOR 7841R provided with veristand FPGA configuration file. The error is attached! Without adding the FPGA target, we are able to deploy.

  We programmed with LabVIEW FPGA card and it works.

  Please help us!

  Thank you

  SID

  Hi Sid

  This is because the FPGA card is not connected through the chassis

  Right click on the (unidentified) PXI system and identify as PXI 1042 q.

  Right-click on the PXI-1042 q system and identify the PXI-8108 controller.

  Then it will automatically fill the devices under the controller

  Now try to deploy again. It will work

  -SID

• read txt large files (via Configuration files) takes too long

  Hello

  I want to read files txt large (about 1-8 MB) in memory.

  the structure of the file looks like this:

  [0]
  Shape = 'Point '.
  The size of the grid [nm] = 100,000000
  Dose of pixel [pC] = 0,100000
  Color = 0
  X = 38,169451
  Y = 10,102625

  and for example a 1 MB txt file contains about 8000 of these points.

  with the code current iam using it takes forever to the txt file is loaded:

  

  no idea how to make the code faster?

  Thanks in advance!

  The configuration files of NOR is notorious for its slowness.  It is generally not sensitive because you normally just read small amounts of data, but as soon as it's large structures, it is very sensitive.  OpenG has a config INI palette that allows you to read or to write something else that the low level is these screws NOR and it shows because it can be very slow.

  The solution is not to use these configuration screws instead I highly recommend the read/write of MGI nothing.  MGI says the chain of analysis from scratch and therefore it is super fast.  You can install the tools of MGI using VI Package Manager.

• Reading Configuration files using Labview RT in a Compact RIO

  Hello

  I am very new to Labview RT/Compact RIO development platform and happen to have a question. I will develop an application in Labview RT / FPGA that will make several simulations. However some these simulations can produce different results depending on the configuration settings. Our systems generally run in a Windows application, were there is a configuration (usually in XML format) file that the application reads and analyzes the given parameters. I was wondering if there is something similar, that I can do it, in which I have a configuration file that can be read before my Labview RT/FPGA application initialization, to change the simulation.

  Thank you

  Mario

  Hi Mario,.

  That's right, there are screws for the files .ini on real-time targets.

• pre-defined types of missing data when using a configuration file

  Hi all

  I recently installed Labview signal express 2011, including the audio wizard and vibrations. I got a file preset to implement the material I have but when I open the configuration file (a Labview project file) I get a message:

  Version of installed components are not compatible with the version of LabView express signal 2012. Please install the latest version of the following:

  "SV express datatypes.

  I do not have Labview signal express 2012 so I do not understand why this error pops up. I also have difficulties in locating the mentioned software

  Please notify

  Hi Yogev_sharvit,

  There is not a way to save the files to a previous version of the Sound and Vibration Assistant. I encourage you to contact SAGE, who was the source of the files, and whether they have a 2011 version available. Otherwise, it may be necessary to configure the steps in the wizard. I've included a screenshot of the file opened below. Unfortunately, this does not bring as much light on the different steps that we would.

• Multicolumn list Configuration file

  I'm trying to make use of multi-column listbox to create a user interface of façade friendly, easy to use for the creation of a configuration file. I wish I had 2 drop-down lists: (1) contains a master list of hardware devices available to the user, and (2) the order of the configuration file (contains only the hardware devices to the needs of the user).

  Ideally, I would like to be able to lock the name / values of the master list so that the user can edit the information. I tried to make the listbox a typedef / strict typedef, but elements can still be changed. Normally, I would just provide an ENUM control that contained only items available, but I am new to listboxes and I don't know if this is possible or not.

  Thanks for the help!

  I use a lot a multicolumn listbox.  A really cool thing you can do with them and what I do now with all my listboxes, is to implement the TS. Live popup.

  http://lavag.org/index.php?app=downloads&ShowFile=31

  With this toolkit, you can apply in the drop down menus to your listbox entries (only the cells in the list box that are registered).  The cells can be recorded/no dynamically at run time.

  Of the questions let me know.

• Problem reading from a configuration file that was edited in Notepad

  Hi all

  When I try to read a configuration file (which was edited from Notepad) using OpenG (read INI Cluster) I get no output function. Debugging for the question I tried to read the same file using read from text file function. The result I got is as follows:

  See here: Config file "byte order mark"

• configuration file protection

  We install our application in

  HOME page: = C:/program files /.

  and install our setup.ini file in the same folder. The problem is in Windows 7, the protections all the files in the HOUSE are on read-only. Then the engineer in charge of the customer service is inviting to enter and change the protections of all files in this directory because, he argues, the instructions are easy to follow. I don't want all users in this directory. I tried and failed to write software that would change the protections for me. I also tried to put the installation file in different directories without success.

  How can I get the installation program to install a configuration file on a computer that is read/write enabled?

  Hello

  You should probably put your configuration files in the Public App Data folder.  You can do this with a LabVIEW 2011 Installer, but I know that you can not with an installer of LabVIEW 8.2.1.  I don't know when they added that.  If your version of LabVIEW does not have this feature have then your application copy the configuration file of your program files in the App Data folder if it does not exist in the Application Data folder.  You can get the App Data folder in the registry.  We can you give more details if you need it, but tell us what version of LabVIEW you have.

  Albert