Fields not shaded by default

Similar Questions

• Service of Proxy Service / business does not apply by default to items

  Hi all

  I have a situation on OSB, is the case here.

  I have a Service Business based on the WSDL, and this WSDL contains some items that have the default definition = '0' (only for request schema) in the schema section.

  When an execute the SoapUI .wsdl, always the fields are filled with the default value. Yet, on OSB when I call the console for the Service of Proxy/Business test

  and run them in the following cases, without tags/value, the default value is not met.

  There is some kind of restriction or limitation on OSB on applies the default value of the schema? Or it's like a work colleague, said: "what you doing is a transformation and OSB is not done automatically."

  Thanks in advance.

  By default doesn't mean that demand for the generators must provide this value. The value is for the analyzers. When a schema-aware parser detects an optional attribute with a default value is MISSING in the inbound document, the parser must register the default value in the model of analyzed data.

  When SoapUI generates the entries to the default settings, so it's good to do. But when the test console does not generate them, it is fair to do so too, because they are optional.

  XML Schema Part 0: second edition Primer

  > Default values for elements or attributes are declared using the attribute by default, even if this attribute has a slightly different consequence in each case.

  >

  > When an attribute is declared with a default value, the value of the attribute's value as the value of the attribute in an instance document;

  > if the attribute does not appear in the instance document, the schema processor provides the attribute with a value equal to that of the default attribute.

  > Note that the default values for attributes have meaning if the attributes themselves are optional, and so there is an error to specify both a default value and

  > anything other than a value of optional for use.

  >

  > The default schema of items processor treats a little differently. When an element is declared with a default value, the value of the element is all that

  > value appears as the content of the element in the document instance; If the element appears without any content, the schema processor provides the element

  > with a value equal to that of the default attribute. However, if the element does not appear in the instance document, the schema processor does not provide

  > the item at all. In summary, the differences between elements and attributes by default can be noted:

  >
  

  > Default attribute values apply when attributes are missing, and default element values apply when elements are empty.

  So the question is: when you run the query from a test console and do a transformation inside the proxy, not you or do you not see the default values on the output? If you do not, the OSB Analyzer is then, mmm, not meet the standards.

  Vlad

  http://genericparallel.com

• How can I validate a dropdown list NOT accepting the default value?

  I have a fillable form where I need the user to select their "number of employees". I've added several lines as their options in a drop-down list (1-10, 11-25, 26-50, 50 +). My question is "defult value" is set to "1-10" and people submit it without changing the correct value.

  I changed the value for default "-select -", but it allows them to always submit the form with the value entered.

  I guess I need some sort of validation script that will basically say - "If the value of this field is - select one - do not submit the form, but give an error that says 'Please select your number of employees' or something of the sort."

  Basically I just want what they choose something as opposed to just submit it with the default value.

  I looked everywhere and am not very good with JS.

  You can't have the default set to a possible real value. You need a value that must be selected.

  So for your sending script, you will need to test all your required fields to make sure that they are not at the default value.

  You make a variable that assumes that all required fields are filled and then check each field and if one still has the default value that you set your variable to 'false' and then when you have verified all of the fields that you test the value of the variable and only if she is true to send you the form.

  var bSumbit = ture; logical variable for test submission

  Test menu drop-down # of employees

  this.getField ("number of employees".). required = false; Disable the required property

  If (this.getField ("number of employees"). value == "-select one - ') {}

  Determine = false;

  this.getField ("number of employees".). required = true; Set the required property

  }

  {if (bSubmit)}

  your submit acation;

  } else {}

  App.Alert (' not all required fields completed", 0, 1);

  }

• CAN about: config to show me everything that is not set by default?

  I don't know what could have been modified by me in the past. I want to see all parameters that are not in the default state.

  The topic: config page shows all the available preferences.
  Pref. who do not have the default value shows as a user defined (in bold).
  You can click the report header to sort comments: this column config page.

  • http://KB.mozillazine.org/about:config

• Can I set the increment/decrement to not visible by default?

  Attachment to increment/decrement to ALL digital controls is a nuisance.  Give me a range that does not have the increment/decrement visible by default and my life will be MUCH better.  I wouldn't mind clicking on a checkbox if it was necessary.

  How can I do this NOT visible by default?

  Make a copy of the control without the buttons and save it as a .ctl file.

  You can place this file in the palettes.

• audio device is not defined by default

  Hello people. I had a lot of trouble with my audio recent and the most recent problem is that my audio is not working properly and when I walked into the audio settings to test the volume controls that were set at the max I sometimes hear a low ding through my headphones. When I try to hear the ding once, I get nothing = / I looked in audio updates, but none of them seem not at this address. the strange thing that I can't understand, is that the audio settings to say that everything works. When I tried to troubleshoot I got this message "audio device is not set as default ' I looked in the settings again and can't saw no trouble. I use a pc laptop hp pavilion g7-1365dx. any idea would be appreciated

  I have it! seems so simple now... after the last 2 idea you I gave does not, I went into the details of the system audio just poking around again thinking it might hurt only is more then I had. I found myself for the 100' e times at least on the tab enchancments and just clicking on things I ticked 'disable all enhancments' even if it us no equity and applied, and boom, problem solved for now at least. Thanks for doing your best to help!

• I can't find my lexmark x 6100 all-in one series on my comptuor, it does not indicate the default value

  I CAN'T FIND MY PRINTER ALL - IN - ONE - PRINTER SERIES.  It is SAID IT is THERE, BUT SAYS NOT SET AS DEFAULT. What does that mean?

  Hello

  -What is the exact error message you see when you try to print?
  -This work was fine before? If so, what are the changes in software/hardware on the computer?
  -What version of windows you have?

  If she says that a printer is not set by default, this means that there is no recognized printer or the printer that is there is not yet defined as a default value. Here are some steps that might be tempted to solve these problems.

  Method 1: Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  This see below mentioned articles that may help you in the matter of fixing.

  Method 2: Solve printer problems.
  You can use the link as a reference which may help you fixing the issue below.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  First of all, try to uninstall the printer drivers, then unplug the USB cable from the printer and then try to install drivers from the Brother Solutions and plugin site then the cable and then try to print.

  Method 3: Download the drivers from the Lexmark Web site
  You can also try to download the latest drivers for the printer from the lexmark support Web page and install.
  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  I hope this information helps!

• Not all fields not wiring updated to a bundle as input to a Subvi argument

  Hello

  I have a big bundle of data that I use to connect between my SubVIs, each Subvi manipulates some fields in this bundle and should send the bundel updated.

  Let's say my Bundel has 20 fields in one of the SubVIs only 2 of these fields are updated and everything will keep the current values. At the end when the Subvi sends the package up-to-date, it must bundel updated and fields not updated together.

  All these fields not updated, to the output wiring made a mess in Subvi and needs a lot of wiring that isn't so smart!  using a local variable also needs an extra unbundeling and rebundeling.

  I was wondering if there is a smart way of handeling this question without wiring so.

  Concerning

  Afshin

  A picture is worth a thousand words they say.

  

  Zinnium,

  As Ben said, the best way to do this is with the bundle name. Why use the Bundle/Unbundle and all these threads?

• I have wrong associated with a DLL block note as the default program for opening. Can I reset this?

  I have wrong associated with a DLL block note as the default program for opening.  Can someone tell me how to reset it?

  See: http://support.microsoft.com/kb/307859
  TaurArian [MVP] 2005-2010 - Update Services

• I get dumps mini message not enabled by default on client versions of windows

  Mini dumps not enabled by default on client versions of windows (message I get trying to open minecraft download for my children)

  [Original title: minidump]

  You are facing the same problem when you open another program or application?

  Try to update your drivers Windows and graphics card.

• When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Just as the title says:

  When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Hello

  It is normal in the Windows Photo Viewer Photo to adapt to the frame is checked.

  Print a photo

  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture

• make a field not floating

  Hello

  I use a main screen which contains a list of label field. I have a title for the screen. I also have a header for the screen. I want to make this header not scrollable. I tried to use vertical field Manager, but his does not. Shud I use a custom field Manager or y at - it another way to make a header field not scrollable.

  the following hierarchy will give more idea abt my problem

  Title screen - not floating

  The list header - I want to make this header also not floating

  List of the body - it is scrollable

  Sorry for my English

  You have to do as VerticalFieldManager _ManagerDetalle = new VerticalFieldManager (VerticalFieldManager.USE_ALL_WIDTH |) VerticalFieldManager.NO_VERTICAL_SCROLL)

  This work for me.

• Unable to print, printer is not set by default

  Original title: printer

  I can't print anything, because the printer is not checked by default.  Single note send is checked

  as a default value.  How can I get the set of deskjet 4500 as a default?

  Hello Lucille Jackson,.

  1 did you change on your computer before the show?

  2. If it works well before?

  3. you receive an error message?

  Method 1:

  Check out the following link to find out how to set a default printer in Windows 7.

  Change your default printer in Windows 7

  Method 2:

  Perform the troubleshooting steps from the following link for printing problems.

  Why can I not print?

• < f: view > tag is not set by default under the < jsp:root > tag of the root while creating .jspx in jDeveloper 11 g Release 1

  Hi all

  I am a beginner for Jdeveloper and ADF, I installed Oracle XE and Jdeveloper11g R1 in practice.

  I created the application, under the model, project Viewcontroler, created components BC and made mapping.

  Now created new page and tried to expose VO (from data control) on the page, immediately it's end with the error message saying "invalid parent for the element af:document element.

  I found that the problem with the tag < f: view > isn't there (not defaulted) under the tag root, by go - ogle.

  My question is why < f: view > tag is not set by default when creating the .jspx page.

  is there any work around to avoid this problem, because every time I can't add this tag manually to the new page?

  Thank you

  Aurore

  You are created JSP, not the a jsf page.

  Here's what you'll need:

  

• Eclipse does not recognize "The default keyword" and "Lamda expression."

  Hi guys, I just started to learn Java, so I don't know much. I have a very annoying problem with Eclipse (I have the latest version installed). For some reason, whenever I use the "default" keyword in an interface, it gives me an error similar to "Default token syntax error", I deleted the "default" keyword, the error disappeared. The same with 'Lamda Expression' as well, I have this object as this Actions myActions =-> () {System.out.print ("Blah blah blah") ;};}   , Eclipse also displays the error message similar to "the body of the method expected after (), delete"->" I checked the version of Java that I have, it is also the most recent, I don't know what it is bad here, any suggestions are greatly appreciated. I thank very you much for your time and your help.

  It happened because I used the line tool of command rather than running using Eclipse. The two image links show errors in Eclipse.

  No - it happened for the reasons that I said:

  Where variable number IS called 'AnimalName' in this interface - that's the problem: not the word "default".

  You can not refer to objects that do not exist.

  This interface code will not compile from the command line or from an IDE, because it contains ERRORS.

  public interface Actions {}

  void Breathe();

  default void run() {}

  System.out.println ("can run 10 miles without stopping!" + AnimalName);

  }

  }

  Where do you want that Java to get the value of "AnimalName" of? It does not exist anywhere. You set in another class as follows:

  public String AnimalName;

  This means that it is a variable "instance". Impossible to refer to instance except as part of an "instance" variables The interface has NO instance of the Animal.