File sharing does not

Similar Questions

• WIN8 - password file sharing does not turn off

  all.

  I just bought a win8.1 Tablet and have hit a problem with file sharing. Since yesterday the Tablet worked perfectly on my network and I transfer file between her and my PC without any problem. But now it will not work. I'm on a WiFi network.

  When on my PC (Me - PC) attempts to connect to the Tablet (Me - Tab) via my computer/network it appears that error message from the device is inaccessible.

  When on the Tablet, I go to my computer and then I can see Me - PC network. However when I try to connect it appears a connection window asks me to enter my username and password to connect. The PC doesn't have a user name or password to connect. I also noticed that this newspaper in the window trying to use a domain called "Me-tab."

  My network doesn't use areas, all PC's are on a working group called simply at HOME.

  The PC (Me - PC) is set up for the RECEPTION of working group.
  The Tablet (Me - Tab) is put in place for the RECEPTION of working group

  On the two I put:
  Network type is 'work' on the Win7 PC and 'private' in the Win8 tab
  Discovery - Network SUITE
  File sharing - SUITE
  Public folder sharing - WE
  a 128 bit encryption - SUITE
  Password sharing - OFF
  Let windows manage the homegroup connections - SUITE

  It seems to be stuck on thinking, it's in a field called his own device name, is there a way to reset completely all network settings? I said the tablet to "forget" the wifi connection, rebooted and reconnected several times without result.

  Can someone offer advice before turn me this table

  Hello

  Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem could occur due to incorrect settings.

  Try the steps listed here:

  Method 1:
  When you receive a request to enter network password enter it Windows 8 computer Name\ user account. And password of the account Microsoft ID password.

  Note: Check to remember the credentials so that you don't have to re-enter.

  Method 2:
  If the problem persists, I suggest you to see the steps in the following article and check if it helps to solve the problem.

  Search for computers, devices and content on your network
  http://Windows.Microsoft.com/en-in/Windows-8/find-PCs-devices-content-on-network

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

  a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

  Hi Abhay,

  I suggest disable you the password protected sharing and check if it helps.

  Networking of computers running different versions of Windows

  Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• When I try to print a PDF file it does not print and goes directly to a backup of the file option.

  When I try to print a PDF file it does not print and goes directly to a backup of the file option

  original title: pdf print
  Hello

  1. don't you make changes on the computer before the show?
  2. don't get any error message?
  3. what version of the operating system is installed on the computer?
  4 is the issue limited exclusively with printing PDF files?
  5. where are you printing from PDF files?
  6. What is the brand and model of the printer?

  
  Method 1:
  Run the fix it and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  
  Method 2:
  Perform the steps from the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 3:
  You can perform the steps from the link and check if you are able to print.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Reference link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?

  The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?  Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.

  Thank you best regards &.

  Atul Zade.

  CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.

  John

• When I run scannow this returns C=\Windows\Logs\CBS\CBS.log when I try to look at this file it does not?

  When I run scannow this returns C=\Windows\Logs\CBS\CBS.log when I try to look at this file it does not?

  also tried on high administrator.

  'c' not recognized as an internal or external command, an executable program or a batch file.

  I have a laptop windows vista, the 3gig of ram, I removed a lot of pictures and school work to free up space, also done a system restore. Hoping that this would remove the corrupted files, badly how I was.

  Can I get some advice please as to my next step.

  Thank you

  Hello

  see if that helps you

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Whenever I try to print something from my documents opens and says under xps. file and does not print

  Whenever I try to print something from my documents opens and says under xps. file and does not print. I also tried troubleshoot my computer and it says that my printer is not a driver and whenever he tries to fix it and says that it cannot install a driver. any help would be appreciated

  Looks like you have the default printer configured to be Microsoft XPS Document Writer.  Go to control panel > printers and devices and see which printer is enabled in a green circle.  If this is the XPS Document writer as I suspect, you can right click on your printer and then select "Set as default printer" after you do this, or if you cannot do this, answer with the brand and model of your printer and we are able to help if you have a driver problem.

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• All My Documents, pictures, videos and music files are does not

  All My Documents, pictures, videos and music files are does not and I can't access the files and I did nothing to them but when I try and click on it, it says "music.library - ms no longer works, the library can be removed safely from your computer.» Records that have been added will not be affected. I understand that they won't be affected, but how am I supposed to recover all my files?

  Hey Kwame,

  I understand that you receive an error saying music.library - ms no longer works.

  Please answer:

  (1) did you do changes on the computer before the show?

  In the libraries folder, you will notice that the icons of the folders have changed to something else. This clearly indicates that Windows 8 libraries are no more work and corrupted.

  To resolve this issue, follow these steps:

  (a) press Windows + E to open Windows Explorer, and then click library.

  (b), select all the libraries with which you are faced with a question and select Delete.

  (c) click Yes to confirm.

  (d) after the deletion, right-click on the icon libraries in the left navigation pane and click on restore default libraries.

  (e) in the first attempt, default icons have been restored but if you are unable to access the libraries of Windows 8, delete and restore again to go back to work.

  Note: Deleting of a library does not delete the contents of the included folders. However, you need to add or include your folders manually, if necessary.

  Kind regards

• How to import the mp4 files, it does not work on my mac

  How to import the mp4 files, it does not work on my mac

  If you try to import a video to use as a guide in your timeline, the video must be H.264 with AAC audio. You cannot use the other MP4 videos with other codecs (such as the MPEG-4 video codec).

• Automatically Reload external files modified does not

  When I modify an external file (eg with Notepad ++), the function automatically Reload external files modified does not work.  This is regardless of whether or not the boxes automatically Reload external files changed or silently reload when file is not modified are checked in the preferences of the environment.

  Oracle SQL Developer 4.0.2.15, 15.21, x 64 build

  Java Platform 1.7.0_55

  Windows 7 Professional 64 bit

  I noticed other forum threads has this connection, but they have all been archived:

  https://community.Oracle.com/message/1244946#1244946

  Bug 9.0.3.3: no editor refreshment for files modified externally

  The current solution - use SQL Developer 3.2.20.09 instead.

  The links that reference you are dated, and one (in fact for JDeveloper) predates the existence of SQL Developer.  Auto-recharge works fine for me, both for Notepad and Notepad ++.  Given that it also works for you with the 3.2.2 version, I can't that assume your user for 4.0.2 settings got corrupted somehow.  If you have migrated the 3.2.20.09.87 or any other rejection of some, I recommend...

  1. exit SQL Developer

  2. delete or rename %APPDATA%\SQL Developer\system4.0.2.15.21

  3. remember that Windows by default, considers the part folder AppData C:\Users\\AppData to be hidden.

  4. start SQL Developer and jump in front of all the guests on the migration of user settings.

  Hope this helps,

  Gary

  SQL development team

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• File menu does not meet a mouse click

  Hello. Last week I updated the InDesign 2015 without problem. This week the file menu does not meet a mouse click. And then it freezes InDesign for up to a minute. I reinstalled again today but not joy. Has anyone else had this experience?

  Try to restore your InDesign preferences:

  Garbage, replace, reset or restore the application's preferences

• I'm trying to open an a 810 nikon raw file but does not open. said gross can't camera model. I have re installed nx2 with erroe u43m1d207. How to open raw files?

  I'm tryng to open an a 810 Nikon raw file, but does not open. Said GROSS CAN'T camera MODEL.  I have re installed nx2 with error code u43m1d207. How to open a file.

  You can use the dng converter if update your adobe programs fails.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.7