File sharing even a problem on CC?

Similar Questions

• File sharing on network problems

  Original title: connectivity problem

  I have a new computer HP ProDesk, but others on the network of workplaces can not access files and printers connected to my computer. I have shared files and printers and also disabled the windows firewall, but this issue has not been resolved. This is not the case with other computers on the network and even the old computer I was using before. Kindly help. Thank you.

  Hello

  Thanks for posting your query in Microsoft Community.

  • Your computer is connected to the domain?

  From now on, I'll ask you refer to the suggestions in the article below and check.

  Share files with anyone

  If your computer is connected to the domain, your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• File sharing problem

  I have four computers in small office. Three see each other, the fourth XP invisable on a Windows network. They all have the same name of "workgroup". and file sharing enabled. I can ping other but cannot get windows network to see?   Number four computer is configured to share files, I ran the wizard several times to double check that the names are the same.  Any suggestion would be appreciated.  James

  You left out the part where you tell us what version of Windows is located on each computer. This is important.

  What follows is quite old, but still excellent, former MS MVP Malke boards:

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders: http://technet.microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista: set up Windows for the connection automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• File sharing via router computer LinksysWirles laptop pc problem.

  Heya!

  I have a problem, try to esteblish sharing files between laptop (connection wirles, WinXpHome) and the office (cable, WinXpPro).

  Use the Network Setup Wizard I have setuped computers for sharing.

  I can access shared folders on the desktop from the laptop, but I can't do the same for office - I don't see anything in my workgroup.

  I tried to disable firewall and AVG Anti-virus on two computers - does not work too.

  IM solutions, what else could be... Any ideas?

  Thank you

  OK, I managed to solve the problem

  I surprised myself even

  problem was in network connections-> or -> advanced settings - connection to the Local network-> mark all checkboxes

  Cheers!

• Problem between Windows XP Home and Windows 7 Starter of file sharing

  Hello, I have a problem with file sharing: my desktop computer running Windows XP Home Edition and my netbook runs Windows 7 Starter Edition.

  On Windows XP, I shared a folder: Win 7 is able to open the directory and the files in the list, but there is no way I can open any file in the folder XP, nor that I can transfer the any of these files to my netbook.
  All I get is an error "access denied."

  The XP Workgroup is the same as the 7 home network, and the users have all the privileges on both computers.

  Can you help me to sort out what is happening, please?
  Thank you.
  B.

  As a first step, you have XP Home, which means that the 'Simple file sharing' is applied on this machine.  In addition, this means that any network connection on your XP Home of any another machine machine is forced to authenticate you as a user 'Guest', regardless of what a privilege that may be the real user.  In from here, it would seem that the 'Guest' user doesn't have privilege for the files or folders that you share.  To resolve this problem, you must change the access permissions to these files.

  If you drag (move) files on your computer in your share folder, the origin on the file permissions will be maintained.  On the contrary, I would say that you copy the file to the shared folder by dragging with the right button of the mouse and select 'Copy' instead of 'move '.  A copied file will end with permissions for the destination folder that will be generally more suitable for sharing.

  To the files and folders that are already in this folder, to change permissions, you must Access the 'Security' tab under the Properties screen.  In XP Home, this is possible if you log in as administrator in "safe" mode  To start your computer in Safe Mode (repeatedly tap the F8 during the startup key key), connect you as an administrator user, navigate to the file or the folder with problems of access, right-click on it, select 'Properties', select the 'Security' tab and set security such as 'everyone' (or 'guest') has the privilege of access you want.

  HTH,
  JW

• I have problems with network file sharing on 3 Windows XP computers.

  I created a network of small business between 3 workstations.  The last 2 set up on the network can communicate and share files between them, but cannot connect to the 1st workstation set up on the network to share files.  connect to 2nd & 3rd ws 1 ws.  a ping to the 1st ws is OK.  followed all the instructions for sharing and folder permissions.  is there any security on ws 1 problem that I forgot?

  original title: shared folders

  Hello

  Follow the steps in troubleshooting these items:

  How to troubleshoot a network home in Windows XP

  How to use Simple file sharing to share files in Windows XP

  See also:

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

• Problem of file sharing between Windows 7 and Vista using a working group

  I use a working group and have a shared folder on a computer that is running Windows 7 Home Premium. I'm trying to access the file from a computer on the same workgroup that is running Vista Business. It requires a username and password that I turn off password protected sharing on both computers and tried all combinations of accounts and passwords on both computers, but can not get access to the file. I'm sure I'm missing something and you would appreciate the help.

  Hello TamiRigby,

  Take a look at this thread for instructions with reset the permissions file and folder to a specific folder in Windows Vista:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/how-do-i-reset-folder-permissions/b186a591-88ca-4FEE-a7a6-25d071dde820
  I suggest you try this with the file you are having problems sharing.

• I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.

  original title: sharing of Windows Vista

  I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.  When I go the file that he always asks if I want to share the folder and when I look at the properties he says not shared... what happens?

  Hello

  I suggest you to read the following article on the essential elements of file sharing and to try to share the files again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

• O0! file sharing 0o download programs connection problem o0! 0o

  I use Windows Vista SP2, which comes integrated with the HP notebook pc.

  The problem is that some file-sharing programs, download make their installation normally, but they cannot download any file (there is progress in the download) and you can tell that your can not connect to the internet.

  I'm not stupid, these programs are not blocked by a firewall, and there are also programs their families do their job properly, example:
  * utorrent is available for download.
  * Unable to download bitcomet.
    
  Please don't let ME DOWN

  Hi GRD-89,

  · You have problem downloading a particular file for bitcomet?

  · What is the exact error message you get when you try to download?

  · What browser do you use to download the files?

  I suggest you to check if you are able to download other websites other than utorrent.

  As you said that you are able to download from utorrent, it means that there is no problem with the operating system, but you can delete all the temporary files in temp, prefetch, %Temp% and folders on your computer and then try to download and check if it works.

  To do this, follow these steps:

  Type %temp%, temp, prefetch in the start search box > press ENTER.

  2. delete all the files in these folders and leave these files which do not deleted.

  You can also run Disk Cleanup to reduce the number of unnecessary files on your hard disk to free up disk space.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Files sharing problems in widows7

  I have a windows xp and a windows machine 7... Both are connected to a domain... But I am unable to get the files that are shared in the windows 7 machine to windows xp... But sometimes, when I restart my computer windows 7, file sharing... Please help me solve this problem

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix i

  When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix it?

  You set the font size to a size that is suitable for the size of the document.   Size of the document may vary everywhere.   To resolve this problem in action, I solved in scaling the document to a known size then use a font suitable for a document of this size.  When you resize an image using size with resample Images not only checked a single pixel is change everything that is changed is the DPI image resolution setting.  So if you size a picture 8 "wide you choose a font size is good for wide image 8" the Save action.  To work around the problem of changing the size of the printing I wrote a Script to use in such an action.  The script is used twice, there is a backup and restore script.   The first time that the script is used the script records the resolution DPI images in the metadata documents.  The second time that the script is executed, it retrieves the registered PID parameter deletes the record of metadata from images and set the DPI images that had been saved.    If the use of fonts for the document 8 "will be resized to fit the print original size.

  In a script, you can calculate a correct font size to use.  Actions cannot retrieve information or use logic. They need to use the Plug-ing and Script where logic is needed.  When you make using Photoshop UI you use your eyes and brain.

  Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
  Contains

  • Action Actions Palette Tips.txt
  • Action creating Guidelines.txt
  • Action dealing with Image Size.txt
  • Strengthened through scripts functions.txt Photoshop action
  • CraftedActions.atn sample Action set includes an example of Watermarking action
  • Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
  • More then a dozen Scripts for actions

  Example of
  Download

• File sharing sharing too!

  I have a strange problem with file sharing.  I fully share a folder, but when I find the Mac that shares the record of another Mac, I see the folder, I shared * AND * I see all the home from another account of shared user-directory and the shared directory is * writeable *.  I don't understand why this is happening.

  Details:

  I have a folder ' / users/shared/Scanner Inbox "I added under file sharing (System Preferences |) Sharing | File sharing).  See screenshot:

  

  When I have my MacBook Pro's ' MacMini' eyebrows, I see "Scanner Inbox", but I * also * see "wasserham", which is the directory to one of the accounts to log on 'MacMini '.  Here is the screenshot of the MacBook Pro, MacMini of navigation:

  

  I am not even connected as user "wasserham" on the MacBook Pro.  This is not sensible.  Can anyone offer some advice on what I did wrong, and how I can stop this insecurity too share?

  Thank you!

  It's normal when you log in as administrator on the file server.

• Slow connection to SMB/AFP file sharing

  Configuration:

  OSX 10.11.3 (15 D 21)

  Server V5.0.4

  Running services: calendar, file sharing, Manager profiles, Time Machine, VPN, Web, Wiki, DNS, FTP sites, open the directory

  We have a problem which has lasted for several months where clients that attempt to connect to file sharing (AFP or SMB makes no difference) takes too long to authenticate. He constantly takes ~ 40-45 seconds to open a session or even reject a bad password. The really strange part is that it affects all computers on our network with the exception of a Mac Mini. Seems not be customer specific, i.e. all users connect without delay on a Mac Mini and slowly on other computers. I was not able to determine differences in settings of network connection or on different computers, but I don't know there are parameters, I'm not aware of that.

  Did someone met with something like that?

  Thanks in advance.

  The faster connection Mac Mini there the active local folders?  Or using a faster SMB protocol?

• Windows Server 2012 Standard File Sharing - access denied?

  So I have a simple Pentium Dual core server here, and I'm putting in place local file sharing. For some reason any however I can't write files on the disk, even when you sign in as administrator of any computer in the network.

  I've been Googling the problem for hours and I found something on the deactivation of the audit, I did in secpol.msc, but I tried to disable it, and it will not always grant access.

  Is something directly above my head, or is it a problem in the file sharing himself?

  Sorry if I'm not providing a lot of details here, but I'm really frustrated about that. If you need any further information I'll post fortunately.

  Thank you for your time for reading.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Vista do not you answer ping - file sharing also stopped working

  Greetings!
  I have problems with my windows vista computer. It can access the internet, load the pages and other servers, ping, but he stopped answering the ping requests and file sharing has stopped working (other computers cannot access its actions).
  -J' have already disabled the two firewalls (both windows and f-secure).
  -If I run wireshark, I can see the Ping ICMP requests (as they arrive at the machine), but ignores them (no ICMP response).
  -When I try to browse the computer from another windows (windows 7), he sees the computer (they are on the same workgroup), but it is impossible to browse. Try to access it from a mac also fails.
  -J' tried to use direct ip address instead of the netbios name, with no luck (access to \\192.168.1.101, for example).
  -Of course, I tried already reboot my router, computers, etc.
  -sfc/scannow detected a few corrupted files (but says he fixed them). But it did not help.
  -J' thought that it might be a problem with windows system files, so I uninstalled SP2 and then reinstalled with no luck at all.
  -J' already tried to reset the tcp ip (netsh int ip reset) stack but also had no success.
  -I'm clean of viruses; already run 3 different AVs (including boot from rescue CD to detect rootkits) and nothing came.
  I'm almost reinstall my whole windows, but I'm afraid even if it cannot solve the problem and having to install from scratch and reinstall * all * my new aplications will be a last operation of the station. Clues as to what I could do? Is there a way manually reset/reinstall only the sectors/services windows network?
  Thank you for your time,
  Gustavo

  Greetings!

  Just the answer I finally had myself on this issue.
  The problem was a malware removal tool called Combofix. I had an infection and several tools to clean, one of which was this tool. I ignored the warning to leave unattended a guru of malware removal, and I just let it do its job (I know, I was wrong... but desperate times require desperate measures). Apparently, he finished and my system was working fine... but not the file share and ping responses.
  Finally, there is a way to reverse the changes made by the latter:
  • Go to C:\WINDOWS\ERDNT\subs\erdnt.exe, double-click erdnt.exe , and then restart the machine.
  • If this does not work, then navigate to C:\WINDOWS\ERDNT\Hiv-backup\erdnt.exe, double-click erdnt.exe and restart the machine.
  By doing this, the reverse tool changes to the system registry and these two services that weren't previously returned to work normally.
  The Trojan horse itself not worried anymore, because I ran Combofix all as precautionary measure, since I had already deleted the Trojan horse itself (ZeroAccess, by the way).
  That being said, I would think twice before getting a Dell computer next time... The version of Vista that comes with it only allows a 'Clean Install' and not 'upgrade install', which seriously complicates to reinstall the system failure (since I have to reinstall * everything *). I wonder if other versions of windows to PC manufacturers have the same limitations...
  Gustavo