file with several custom templates dialog box

Similar Questions

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• Dreamweaver Templates dialog box

  I work with several sites and enjoy the management of Dreamweaver templates.

  For the most part, it's great, but there is a very frustrating problem that I hoped would be addressed during the last three versions of DW:

  When I'm dealing with sites that have a lot of models and their nested models, the Model dialog box is not sufficient. I'm going to lose minutes trying to find any given model because:

  (a) you can't resize the dialog box, then you can only display on 6 or 7 models at a time, which does not cut on large Internet sites.

  (b) they are understandable order - not alphabetical, not in the order in which they were created - it seems almost randomly

  Here's the box I'm talking about. I get it by clicking Edit-> Templates-> apply the model to the Page:

  

  I worked with DW years but I don't know everything, so maybe miss an easier way to do it.

  Maybe it's a way I can apply templates and/or discovers the hierarchy of the model without having to use the extremely small and archaic dialog box, or can I change a file or registry entry to remedy?

  Thank you!

  Thank you for taking the time to develop your work scenario.  I have a much better idea of what your needs are and can see how the nested models can meet your needs [rare].

  If you work in DWCS4 (the latest version), then you have already seen how the Model dialog boxes have changed - so now I'm confused.  Maybe I don't think of the correct dialog box.  My answer assumed you were referring to the FILE. New dialog box from the model.  Is it not what you wanted?

• Showing the full path of the file in the Save as dialog box

  I'm a relatively new for MAC OS and I took the habit of intelligent services on Microsoft file manipulation, in particular to the Save as dialog box. Who has a little smart "arrows" and "buttons" allowing you to ask around the system of files easily, but I faced something else in the MAC operating system.

  Finally, I was able to pass on the path of file bar in the Finder (basically, that nice, small bar with the name of folders/sub-sub-sub-folders you can switch to and it shows "where you are both in the file system"), but I don't miss the Save as dialog box. I tried to find it in the settings to turn it on, scoured the internet, talked with experts at Apple, also called the central phone number, but I couldn't learn all solutions to get the bar path of file under tension to the Save as dialog box.

  And believe me, it's very annoying, when you create a file structure when you register under ' week/Tuesday/XY client Documents/work/approvals/journal/2016/August/2nd /' a file and for the recording of the version changed the same file under the same path, but not to not only return to the file a subfolder creation there AB of the customer, I have to click again through the whole lot.

  The arrows 'story' don't help because when I click on the it puts me directly to record under the folder where I have the last recorded the previous file, or help click on the drop-down above, where records are listed because I could never find the subfolder where I want to go back to there.

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  ..., and I don't want to keep a Finder opens just to copy..., on the way to the record, which was the same effort and has been even more professional!

  I would like to just turn this simple file path bar,..., even that which is available in the Finder!

  Any ideas would be appreciated, thanks for sharing your thoughts in advance, Ian

  Imre of Glen Waverley wrote:

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  1 NO.

  2. we are all just users here and have no info about Apple's plans.

  If you do not want to let Apple know your feelings, you can send your comments here.

  http://www.Apple.com/feedback/

• FDK - add custom modeless dialog box in the workspace

  (transferred to framedev and coaches, have no chance to get a response)

  Hello

  Someone at - it their own dialog box successfully added to a workspace, then got to

  appear when this workspace is selected or reset? The FDK doc implies that this

  can be done, but I can't understand it. I opened my save dialog box the

  workspace, but it does not come at the time when I reset the workspace.

  In fact, I didn't it works, because there must be some other crochet

  where I responded by running the appropriate code to open the box. FM couldn't know

  What would this code. But I can't understand how to use notifications.

  In particular, I can't understand FA_Note_Dialog_Create at all.

  Thank you

  Russ

  Well, I finally thought to it with greater experimentation. I think the answer is in the FDK docs, but it was difficult for me and my first experience has failed for some reason any. Pasted below is some info that I sent to Maxwell Hoffman at Adobe, in which case it would be interesting to their team of technical publications:

  RE: Adding a dialog box customized to a workspace

  It took me a long time to understand this because I think the FDK documentation lacks some details. Here's what he says now:

  "Because FrameMaker supports workspaces, modeless dialogs of the customer can become a part of a workspace. To do this, the customer must manage the notification FA_Note_Dialog_Create, who is sent to the client when the workspace must launch the modeless dialog box for a particular customer. »

  I guess the answer is there, but it wasn't enough clarify for me to understand at the beginning. I have finally understood that when you save a workspace when the dialog box is open, the notification and then is done automatically once you select or reset this workspace in the future. There is also the fact that "sparm" is set to the name of the dialog box, you need to test in order to know how to react. So, I would recommend adding some verbiage that is similar to the following:

  When a workspace is saved with a custom open modeless dialog, name and positioning of this dialog box are stored with the workspace. Then, when the user selects or resets the workspace, FrameMaker sends the FA_Note_Dialog_Create to the respective customer with sparm set to the name of the dialog box. It is then the responsibility of the customer to manage the notification and run the code needed to open the new dialog box. Once the dialog box is open and the client code stops, the workspace setup routine will continue and position automatically dialog as stored in the workspace.

  Note the following points:

  -FA_Note_Dialog_Create is sent when the workspace includes a custom dialog which was opened after you save the workspace. If several custom dialog boxes have been opened, individual notifications are sent for each.

  -Customer notification code must reopen the dialog box itself (F_ApiOpenResource(), etc.), then it will position the workspace.

  - As all notifications, you must enable FA_Note_Dialog_Create with F_ApiNotification().

• TDMS files viewer used in a dialog box

  I would use the viewer of TDMS files within a VI dialog box. The problem occurs if I change the properties of the VI - appearance of window - window modal behavior (it should be modal).

  When I click the button and run the viewer of TDMS files become two modal windows (my Viewer file VI and PDM) and 'lock' to the other: I can't control any of them.

  Is it possible to use the viewer of TDMS files as a dialog box?

  Thanks in advance,

  Ljubo.

  We remember, made you changes to a copy of the TDMS files viewer and not on that of VI.lib. With a upgrade/reinstall of LabVIEW, you will forget this small change, and you're back to square one.

  Tone

• First Watch a unexplained file to open a project dialog box but does not say what he wants or case?  Really?

  It is a common phenomenon: I opened a project in first, and instead of the interface user of first, I see a file dialog box.  Apparently first is looking for a file, since there is an option for "display only exact name match.»

  But corresponds with what?  Is nowhere on the screen there a file name, or anything to tell me first seeks.  Isn't this monumentally stupid?

  And so forth, over and over again for each file first can not find.  Your only viable solution is to hit "Skip All", since you are never given a file name.

  Once the project is in place, you can browse your timelines for any red video event.  And when you do a right-click on one of them to view its properties, first show you often inexplicably the name of an audio file.  Sometimes, you see the name of a video file.  But what is missing here, Adobe?  THE path.  You get the name of the file and nothing else.  You have still no idea where first expected to find the file, so you have no way of troubleshooting of his disappearance.

  And I thought the dialogue of media-reissue of old FCP links was bad.  Is there a solution for this?  What is the workflow expected here?

  Thank you!

  Looks like you're on Mac El Capitan (OS 10.11.x), is that correct? If Yes, some dialogs changed with 10.11 Mac and affected dialog boxes are more display the title bar, which is where this information is displayed (this affects a number of applications, not just the first one). Is a question that is being investigated because he was not a problem on Mac OS 10.10.x.

  Since CS6, it has improved to the Media link dialog box (as seen in the screenshot by shooternz).

• MAC OSX 10.9.5: what is this strange file format in the open dialog box?

  Hi all.

  I had never really noticed this, but I saw a rather unusual format in the dialog box open and I was wondering why it appeared she did. It appears in the file/open dialog box as follows:

  

  To be completely transparent, I had posted this image on my Twitter feed at @illustrator. Since then I have been in contact with Scott, but the Council was to reinstall Illustrator. If this had happened on a single machine, I would rather agree that this can do something, but since the discovery of this unusual format, since saw him on six Mac OS 10.9.5 and illustrator version 18.1.0 18.1.1

  Can anyone else confirm that they see the same thing; or if there is a difference, that this format is actually. I suspect it's a bug but need confirmation by other users.

  Colin

  This is the plugin automatic activation suitcase. I turn it off and the odd file format disappeared. Means also my previous comment on past on machines WITHOUT the plug-in was incorrect, and I can confirm that after having double-checked the machine without a suitcase.

• Custom remote dialog box crashes (subscription success window)

  Hello world

  I have a bug for a very long time, which I can't seem to be able to solve or understand, where it comes from.

  In the viewer generator, there is this field:

  URL optional custom dialog box distance

  This URL load when the client has completed the subscription process. For example, you can ask for user or provide details about your products.

  When I fill this with a URL on my publications page marketing, definitely, what happens: when a user subscribes to my publication, this window appears once the subscription process is completed.

  The problem is that with all the applications for the last months, I've built, the application always stops in this window showing the contents of the given url, but with no possibility to leave this window. There is no 'Done' button either and no way to return to the library. The only way to leave the window is by killing the application via the Task Manager.

  Someone else this problem? The only solution is to keep the empty field in the Builder Viewer and showing is not a success to the client window (although not having the possibility to ask for contact information).

  The URL of a States in this area should fullfill special features (as a reminder of a certain type?)

  Thank you very much in advance,

  Richard

  @everyone,

  You will need to implement the API goToLibrary on the 'Submit' button of a form or something in the url of dialogue at a distance in option (http://www.adobe.com/devnet-apps/digitalpublishingsuite/Store-sdk-19.0/goToLibrary.html)

  * The dialogue option remote url can only be hosted on a Web server. No way to implement in HTMLResources.zip

  * goToLibrary API only works with the v1 API (application of Viewer until v25). If your application is currently in v26, you need to go to 'Advanced Options' in App builder and check the option "use inherited store API. This will return the V1 app where the goToLibrary API will work as stated in the above url.

• Click on a .pdf link does not open the .pdf file, it opens a SAVE DIALOG box

  Recently, when I click on a link to .pdf file I'm not able to open the file in an adobe reader or a FIREFOX Web page or open it using the full program from adobe. Instead, it opens a dialog box SAVE asking me to save it on my hard drive. I don't know what happened, and I'm trying to find someone who might know what is happening?

  I had the same problem, but I got by the following methods:

  Go to Firefox > Options > Applications > Portable Document Format (PDF)

  And for the Portable Document Format (PDF) set the State as "use Adobe Acrobat (in Firefox).

  Fact

  Now the PDF opens in the Firefox browser without having to download the file to open.

• If I click on a hyperlink in text file, I want a download dialog box, not for firefox to try to open it (> 20MB).

  When I click on a hyperlink to a text file large, how I can change the default behavior of FireFox to open a "File-Save" dialog box directly?
  On the contrary, FireFox tries to open the file and for very large text files, 25 MB or more, which is excruciatingly slow. I use a program to treat these files in a few seconds, if only I could download them.

  Thank you - Ed

  Press in and hold the ALT key while you click on the link for the download dialog box.

• Need help to organize Excel files with several data

  Hello everyone!

  I'm working on a project consisting of a full acquisition system. I have great finisheda part of my program and now my guardian's ask me something else.

  In you project I have several datas: Move, force, speed, time,...

  And he would like that this data in the same Excel file with a predefined order. In the example: column 1: time, column 2: speed, etc.

  I already tried to work with the block 'write on a file of measure' and associate a different signal through a simulation, and it works. The first signal is the left column. The second signal is the second column. So it's ok about this. But when I try to link a VI unlike a simulation, that the file does not work. Even if I use the data of 3 or 4, I only had a column with some strange results.

  That's why I ask your help. I would like to know if you have a good way to solve this problem I want to clarify that I am a beginner in LabVIEW.

  I join my project in order to help you understand. I hope I was clear enough

  Kind regards.

  ML

  PS: Sorry for my English, I know that I'm not very good like that!

  Thank you for your project, including - it shows me that you are using LabVIEW 2015, which means that you have the Report Generation Toolkit, with the ability to easily generate Excel "Reports", available.

  If you really want to generate Excel (.xls, .xlsx) files, the GTA is, by far, the best way to do.  If you go to the search bar in the Forums of LabVIEW and type "Example revised" - the first 'hit' should be a post of two years of mine where I show how to use the GTA to more or less do what you described.  Give it a try with some of your data, and come back if you have any other questions.

  Bob Schor

• Import Illustrator file with several layers and sublayers as composition by keeping all layers and sous-calques

  I drew a map of the country with several layers and sous-calques, including the streets, cities, railroads...

  Now, I want to create a template for my colleagues in After Effects.

  To do this, I want to import the AI in After Effects, holding all sublayers and layers in compositions and subcompositions.

  When I do, I get the first two layers correctly, others just in a merged publication.

  What can I do to get all the layers of each as a layer in After Effects?

  Best regards, Raphael

  Illustrator imports only the first level of the layers. If you have groups or paths below you must release layer groups. The layers will then be stacked in the order in the form of layers. Then you need to move them to the top.

  The procedure is to select a layer in the layer Illustrator Panel, then without selecting any which specific element in the layer click on the menu in the upper right corner and select release to layers. All an elements in this layer will be transformed into layers. Now, select all, and drag them to the top above the original layer. This will leave the empty original layer and put all the elements in new layers.

  Here is a tutorial I made there are a bunch of years and who uses this technique to transform a mixture in a morphing.

  Morphing with Adobe Illustrator. I hope this helps.

• Send THIS FILE missing from MY PICTURES dialog box...

  I no longer get the dialog box asking to MAKE ALL MY PICTURES SMALLER or SIZE of ORIGIN LEAVE... by sending a jpg of MY PICTURES. I have windows XP pro.

  Might be interesting to try to run the following command:

  Reach... Start / run and type
  (or copy and paste):

  regsvr32 /i shimgvw.dll
  (Yes, the space after the 2 and the)
  After the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll