Fill a field from the value on another page

Similar Questions

• How to set the value of a field from the LOV of another field.

  I'm trying to figure out how to set the value of a field (P_PROGRAM) to the value of another field of based lov (P_STATE).
  
  The P_PROGRAM field is a hidden field. The P_STATE field is a required field and is based on a list of values for the State Codes.
  
  When a user selects the State to P_STATE, the field of the P_PROGRAM should be set to this value, as well.
  
  I tried different ways to get there via a function call on the post for the calculation of the field P_STATE, defining the source P_PROGRAM to the value of the page item P_STATE put varialbles, creating a process before SENDING, and they all still come back as having a NULL value for P_PROGRAM, therefore impossible to create the file in the db as the PROGRAM is a mandatory field in the table.
  
  Can you please help? Thank you, Laura

  Laura,

  It is always helpful if you provide information about the Apex version you are using. The Apex 4 you can use Dynamic Actions to achieve this. In earlier versions is possible using processes to submit or javacsripts, as well.

  Heres how you do in 3.x with treatment to submit, to make it work in 4.0 as well.

  1 do the P_STATE ' select list submits the Page.
  2. Add a calculation on the point P_PROGRAM, or write to him assign a value based on a process. The treatment should be OnLoad after the header
  3. If the page does not have an unconditional branch that loops on itself, add a. NOTE: The direction must be the last branch (larger sequence number) and should have checked "Save Session State".

  This is what will happen
  a. when the State is selected Page will be submitted
  (b) it will take the unconditional branch to himself and save the value of P_STATE
  c. the calculation process / fills the value of the P_PROGRAM element when the page reloads

  Kind regards

• Change the value of a field when the value of another field changes.

  I have a level of order form with a number of areas where the quantity (number) is typed in they are labeled qty1, 2 and so on.

  Some of the items on the order form attract additional fixed a load which is shown in a separate field call it addcharge.

  If qty1 has a number entered it attracts an additional cost and the addcharge field changes the value of zero to say 1

  If 2 has a number entered without extra charge applies

  If 3 is a number entered without supplement applies

  If qty4 has a number it attracts an additional cost and the addcharge field changes the value of zero to say 1 or if the previous qty1 has already changed the addcharge to 1 field, remains at 1.

  If qty5 has a number entered it attracts an additional cost and the addcharge field changes the value of zero to say 1 or if the previous qty1 and qty4 has already changed the addcharge to 1 field, it remains 1

  
  

  It seems to me that some "if else" enabling javascript is necessary in the sense of "If qty1 field is greater at 0 addcharge field is 1"and I guess the script must be placed in each field which attracts addcharge.»»»

  
  

  Can anyone help with the script please.

  
  

  Thanks Eric
  

  Please sign the right answer. Thank you.

• PDF form: fill in the field with the value of another field

  Hello

  I have a PDF form that one of our employees has to be completed on a regular basis.

  There is a 'product' - text field, which is present on the form several times, which will contain the same information.

  From now on, my colleague has fill all these these one by one manually. But with the copy - paste, it doesn't take more than a few seconds.

  However, to facilitate work a little, I want to it to be able to simply fill out one of the fields (can be a specific, must not be dynamic) and all the other 'product' - fields automatically takes the value of the field of this first.

  How can I accomplish this?

  I noted the possibility of JavaScript controls.

  I am familiar with basic JavaScript, however never used it for PDF files.

  Any help and pointers would be appreciated.

  Thank you very much.

  This isn't a problem with script. Just give each field of the same name. Once the field names are the same, a change in one will be to another. For some reason that it does not work with standard HTML forms, probably the reason why you ask.

• fill a field from the sum and the other two table group

  I have a table named dgpercentagedatachart that has a field
  called totalcecrating which must be completed

  dgpercentagedatachart is my target table

  To fill in this field, I will use two existing tables

  Table 1 = rental service

  Table 2 = meter

  I need the SUM of the KW of field in table 2 GROUPBY feederid in table 1

  Table 1 and table 2 common field is the objectid tbl1 and servicelocationid
  for tbl 2, so this is will be the join I will use

  It of what I have so far in my query, but are unable to complete
  correctly. I need help!

  Insert into dgpercentagedatachart (totalcecrating)

  using servicelocation (objectid)

  Sum (kW)

  innerjoin servicelocation meter

  on meter.servicelocationid = servicelocaid.objectid

  GROUP BY servicelocation.feederid;

  Here is my table DG % (target)

  name of the field type Nullable

  TOTALCECRATING NUMBER (38.0) Yes

  FEEDERID NVARCHAR2 (255 CHAR) Yes

  NUMBER (38.8) PERCENTAGE Yes

  LOWESTFEEDERRATING NUMBER (38.0) Yes

  OBJECTID NUMBER (38.0) No.

  DG % DATACHART

  DATA

  FEEDERID TOTALCECRATING

  X 33

  X 33

  X 121

  X 122

  ServiceLocation table (table 1)

  fieldName nullable datatype

  OBJECTID NUMBER (38.0) No.

  Yes FEEDERID VARCHAR2 (20 BYTES)

  Data

  OBJECTID FEEDERID

  61897 X 33

  61898 X 33

  61899 X 33

  61900 X 33

  B521 141287

  Counter table (table2)

  fieldName Nullable Datatype

  Yes NUMBER (38.8) KW

  OBJECTID NUMBER (38.0) No.

  ID ServiceLocation source KW

  PV 0 162756

  194720 PV 1.01

  106697 PV 1.2

  195975 PV 1.2

  133967 PV 1.5

  105461 PV 1.6

  365278 PV 1.62

  Hello

  2685870 wrote:

  That's what I received your reply:

  Select sum (m.kw), servicelocation.feederid

  of servicelocation sl, meter m

  where to meter servicelocation inner join

  on meter.servicelocationid = servicelocation.objectid

  Servicelocation.feederid group;

  ...

  You are mixing up in two different ways to do joins.

  ANSI join syntax uses the keyword JOIN between table names and the join conditions, after the keyword, all in the FROM clause, like this:

  OF sevicelocation sl

  JOIN meter m ON m.servicelocattionid = sl.objectid

  The old Oracle syntax has commas between the names of tables in the FROM clause and the join conditions go in a WHERE clause.  JOIN keywords and THEY are not used.  For example:

  OF serviceloation sl

  meter m

  WHERE m.servicelocattionid = sl.objectid

  Do not use both in the same query.  Use one or the other consistently.  (I recommend the ANSI rating.)

• Disable the number of items based on the values of another page/table

  Hi people,

  I have a form with 15 fields such as:

  Form1

  id_plan = 1

  level 1 = 2

  level 2 = 2

  level 3 = null

  level 4 = null

  level 5 = null

  level 6 = null

  and so on...

  Later, in another form that I have:

  Form2

  ID

  id_plan (from 'form1')

  account: 10.01 (based on the number of decimal places defined on the level of 'form1')

  So, I need to disable page Form1 items if I had some values of Form2. But only the levels where the account is registered. In the example above, only level 3, level 4, level 5, level 6 and so on would be activated.

  Any suggestion?

  I could put a read only condition for any page in question, is it good? or there is another suggestion?

  Thank you

  bsalvador

  Hi people,

  To resolve my issue, I used the read only option. I chose the body of the PL/SQL function returning a Boolean and put

  Start

  If (CST_RETURN_LEVEL(:P7_ID_PAR_PLANO_GER) > = 2) then

  Returns true;

  end if;

  end;

  where CST_RETURN_LEVEL is a function that returns the last filled level. If the point of the page is at level 2, I test, if CST_RETURN_LEVEL(:P7_ID_PAR_PLANO_GER) > = 2 then I returned true for read only and so on for other page elements.

  Thank you

  bsalvador

• Fill a field value based on the value of another field

  Hello
  Could someone tell me what is the problem with the following select statement. For a group of records, trying to fill a field with a value based on the value in another field (problem of status), but the Group of records appears empty just when I put this code in the field.
  Any help would be appreciated
  Thank you
  
  
  <? choose:? >
  <? When: IssueStatus = "Open"? >
  <? 1? >
  <? end when? >
  <? otherwise:? >
  <? When: IssueStatus = "closed"? >
  <? 2? >
  <? end when? >
  <? otherwise:? >
  <? When: IssueStatus = "Unresolveable? >
  <? 3? >
  <? end when? >
  <? end otherwise? >
  <? end to choose? >

  Use the following syntax.

  
  
  Display 1
  
  
  Display 2
  
  
  Display 3
  
  
  

• [JDev12c, ADF] How to get the value of a field from the selected line in af:table and...

  Hallo,

  I want to double click on a line of an af:table to call a page that displays a form (based on a View object) with the details of the selected line.

  I need to go to the second page the value of a field on the line that is selected on the first page.

  How can I do this? In particular, how can I get the value of a field from the selected line? How can I call the second page on double-click on the af line: table?

  Thank you

  F.

  Why would user, you need to pass a value of the line to the shape?

  The framework selects the line you want to display in the form. All you have to do is to show the form with the selected line. It is the framework automatically as long as you use e vo even the same data control.

  Timo

  Post edited by: Timo Hahn
  And the handling double-clicks is described here http://www.oracle.com/technetwork/developer-tools/adf/learnmore/56-handle-doubleclick-in-table-170924.pdf

• How do I delete an article based on the value of another field

  
  I have a pdf form that I added to the text fields. My challenge is that of the financial section of the form, if the value of a specific field is empty or null, I blank block of signature financial review.  I've been trying to find a way to cover the area of signature with a white box or have a text box with signature block text appear or disappear depending on whether the value is zero or empty.

  If seen many answers on how to make the field itself disappear based on value, but I did find something that causes another field or shape appear or disappear depending on the value of another field.

  Please try the following script,

  var signid = true;

  If (this.getField("finan").value! = 0) signid = true;

  of another signid = false;

  If (SignID) this.getField("signaturefield").display = display.visible;

  else this.getField("signaturefield").display = display.hidden;

  Please let me know if it solves the problem.

• How to automatically complete a transitional according to the value of another attribute when attribute line is questioned in the VO?

  Hello world

  The task seems simple enough, but I have not found a way to populate an attribute transitional according to the value of another attribute when the line is queried. What is the best way to achieve this?

  Thank you.

  James

  Use VORowImpl, if you have any transient attributes defined in the view object, whose value is derived from other attributes of the line, you can override the GET method and add logic there

  Please note that this class represents a row in the results collection in a display object.

• Filled text field, clear the default checkbox

  I've seen a lot of question and scripts on when a box is checked, then the text field copies the value of the checkbox.

  What I'm trying to do is the opposite, i.e. If a text field is empty, the check box by default is checked; But if the text field is filled with what, check the check box disappears. Could someone help with scripts?

  Let's say that the checkbox is named "Check Box1". Enter this code in the custom text box validation event:

  this.getField("Check_Box1").checkThisBox (event.value == 0, "");

• How can I use highlighting conditional to assign a cell using the value of another cell

  I would use conditional highlighting on a cell based on the value of another cell.

  For example:

  If K2 is 1, then I would than A4 Green

  Any suggestions?

  Hi louis,.

  This approach is to add a cell to compare your target for:

  

  Highlight the rule in this case:

  

  Quinn

• How can I make Foxfire quit gives me the message Firefox prevented this page from automatically redirecting to another page?

  When I'm on some sites Firefox gives me the message Firefox prevented this page from automatically redirecting to another page? and then I have to click on allow. This happens on every page on some sites. How can I make this stop all together?

  Tools-> options-> advanced-> general, then uncheck the warn me when websites try to redirect or reload the page

• Change the Label element based on the value of another element

  Hi guys,.
  
  I need to put a label of point (A) based on the value of another article (B). I did the following:
  I created a dynamic action.
  When B changes:
  1. present the value of B
  Article 2-updated
  Is element A label: myitem & b.
  
  Any ideas?
  
  Best regards
  Fateh

  His work! Check it out now

  Just do it

  $('#mylabel').children('label').children('span').text($v('P1_A'));
  

  Published by: VC on June 9, 2012 11:21

• Cannot turn off the field from the date of entry into application workflow

  Hello
  
  We implement the workflow application in OIM11g.
  
  We use application templates to achieve this.
  
  We want to disable or remove the field from the effective date in the rationale page that appears when we raise a request. Did one of you has implemented or came across this scenario. Please update if you have an idea about that.
  
  Thank you

  The property system will remove the entire page of the process, including the justification box.

  -Kevin