Change the Label element based on the value of another element

Similar Questions

• How to change the value from another page

  I'm filtering province in my application based on a province selected in the home page (P16), however the user can submit a form that has a province that and after that, all the content must be filtered according to the selected province 'new '. So I'm in the P7 and after submitting the form, I would need to change the P16_PROVINCE - which belong to another page (P16).
  
  but do not know how,
  Any help?

  Mehrdad says:
  Thanks, VC, but I need to have a trigger to change the P16_PROVINCE after submitting the form, so that one must be changed according to what the user does on a form...
  After he submit the form, I have my game P7_PROVINCE, which is fine, but AFTER the selection, I need to change the P16_PROVINCE (which is used as a global variable to filter my records...)

  Add a plsql page 7 page process and submit the game it runs - as below

  //assign the value of P7_PROVINCE into P16_PROVINCE
  :P16_PROVINCE := :P7_PROVINCE;
  

  See http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_ses_val.htm#HTMDB03012

• Changing the value of ApplicationIndicator

  Hello

  Adds an icon in the homepage of BB using ApplicationIndicator and when I try to change the value from another file using setValue() get "null pointer exception". Do not know how to proceed with him.

  Add the home page icon

  ApplicationIndicatorRegistry reg = ApplicationIndicatorRegistry.getInstance();
              EncodedImage image = EncodedImage.getEncodedImageResource("Indicator.png");
              ApplicationIcon icon = new ApplicationIcon( image );
              indicator = reg.register( icon, false, true);
              indicator.setIcon(icon);
              indicator.setVisible(true);
  

  Changing the value

  ApplicationIndicatorRegistry reg = ApplicationIndicatorRegistry.getInstance();
                      ApplicationIndicator AppIndicator = reg.getApplicationIndicator();
                      AppIndicator.setValue(5);
  

  I'm missing something here...

  Pls help

  TIA

  Shiv

  incoming call runs within the phone application. the phone application will not have access to your indicator of demand.
  Use global events, the Bank of execution or a callback mechanism to communicate with your application and run change it.

• Deactivating a page element based on the value of another element on the page

  Hello
  I have a page element I want to turn off if the value of another article (drop-down list item) is set to a specific value. I followed the example in the book 'Pro Oracle APEX"(p.320) in this regard. He ordered me to do this in the HTML form element attributes for the element section:
  OnChange = "htmldb_item_change (this); html_DisableOnValue (This, 'Closed', 'P3_PRIORITY', 'P3_ASSIGNED_TO'); »
  
  It works very well. It disables the element I want to disable. HOWEVER, it does not neutralize the article unless the element with the onchange attribute is changed.
  
  How can I add features to disable the second element, even if the first element does not change, but contains the value 'Closed' when the user of the first load of the page?
  
  Thanks for your help and your insight!
  -Reid

  Hello Reid,

  The easiest way would be to (also) a Condition only read the item that you want to disable.

  Greetings,
  Roel

  http://roelhartman.blogspot.com/

• How to disable a page based on the value of another element on the Page element?

  Hello
  
  How can I turn a page element using javascript based on the value of another element on the page?
  
  Eg: P1_TEXT want to be disabled if the value in P1_LCOK = "LOCK".
  
  How can I do this using javascript. I want this implemt on loading the page.
  
  Kind regards
  Benz

  Put this function in the page header:

  and call it in the footer:

  f_disable_item;
  

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• JavaScript allows you to change the value of the page element?

  How to use JavaScript to change the value of the page element?
  I can read the value of the page element.
  
  I can change it by JavaScript?
  
  Thank you.
  
  David

  Depends on what is the type of page element - for text/no Select something like:

  function setValue(){
    $x('P1_FIELD').value = 'Oracle';
  }
  

  For a select element, something like this:

  function setSelectValue(){
    html_setSelectValue('P1_SELECT', 'Oracle');
  }
  

• What trigger use to change the value of the front element validate trigger

  Hello
  
  I would like to have an element of the DATE where it is possible to enter values as 1 + 12,-1, which should respond to the evolution of the value of the element to SYSDATE-/ + X. How should I do?
  
  Now, when I get out of the question, I get a validation error because the value of the element is not a valid date. How can I change the value of the date before it is validated?
  
  Concerning

  Create a non-base of data-element with the char data type.
  Fill the element in the POST-QUERY-trigger with the value of the date element of the basis of something like

  :BLOCK.THECAHRITEM:=TO_CHAR(:BLOCK.THEDATEITEM, 'DD.MM.YYYY');
  

  Then in the WHEN-VALIDATE-ITEM, check if the user entered a valid date, then simply write to the database column, otherwise check a valid value you want to treat, make the appropriate conversion and rewrite the date you got in the article database and the database element.

• How to change the value of the Application for all users?

  Hi, I work on Apex 3.2.1.00.12 which is installed on a database of Oracle 10 g Enterprise Edition Release 10.1.0.5.0
  
  I'll explain my problem... At the beginning of the application, the user choose a year, each year can have 3 status and based on the State to restrict or grant access to certain tabs, pages and options. I put the status of the year selected in an Application element and then I just use an authorization scheme to check if the user can access pages or options.
  
  The problem is that if the administrator changes the status of the current year (for example, 1-2), users who are currently in the application will have access to the options of the State 1, instead of the State 2 options. is there a way to change the value of this element for all users?
  
  Thank you.

  Force a disconnection of all users? You can't really affect the values of the sessions other than your own via a browser, and from the point of application is part of a single session...

  You could re-read the value of point of application of its source whenever you load a page or tab game...

  Thank you

  Tony Miller
  Ruckersville, WILL

• Change the value of the radio button using Java Script

  Hi I have a radio button "Process_mode" with two 'ONLINE' and 'Offline' values.
  based on the selection criteria, I will call the process_mode() function and if the user presses the ok button I want to change the proces_mode offline.
  Here's my java script.
  but it does not change the value of the variable.
  Please suggest how to proceed.
  
  function process_mode()
  {
  confirm_msg = confirm ("your search criteria is complex.") It is proposed to submit the application in offline mode. do you want offline? ») ;
  If (confirm_msg is true)
  {
  $x('p2_process_mode').value = "out of the CONNECTION";
  $x('P2_HIDDEN_PROCESS_MODE').value = "offline";
  }
  }
  doSubmit ('BTN_FINAL_COUNT');
  Alert ("your application has been submitted. Please wait until the system processes your request.') ;
  
  Thanks and greetings
  
  Ashok Salimath
  
  Published by: user644340 on July 19, 2009 23:11

  Hey Ashok,

  A Radio element generates actually individual boxes within a radiogroup (this is done by giving the same "name" attribute to each key). Each button has its own attribute 'ID', which will be the name of the option page more "_n" - where n is a number from 0 (zero) - so the first button will be, say, "P1_RADIO_0", then the second will be "P1_RADIO_1" and so on.

  To set the value of the radiogroup and, therefore, article, you need to 'check' one of the buttons - this is done by setting its 'checked' true value. For example, if "Offline" is the second radio button to the P2_PROCESS_MODE element:

  $x('P2_PROCESS_MODE_1').checked = true;
  

  Andy

• Change the value of varying directly?

  Suppose I have a variant from an external source.

  Suppose I know the data type, but I don't know the attributes and their values (if any).

  Is it possible to directly change the value of the variant, "under the hood" so to speak and leave all attributes intact?

  I know that I can read all attributes, generate a new variant with my new data and write them all back, but that seems very inefficient.

  Casting of new data to a variant, and then using the variant of data to convert the Original variants type that seems to work as well. Once again, kludgy.

  Sting autour with «...» VI.lib\Utility\VariantDataType\*.*, but so far, not to find a method 'live '.

  Thank you!

  You can use the structure of the element inplace to set the value of a varying existing.  It retains all the existing attributes.

• How can I change the value of the sample during my simulation period?

  I'm about to set discrete PID profile vi to specify the values of the period of sampling of the order hold block. At t = 0, I wish that the value of 0.5 and then change to 1.0 when t = 5. Currently, only 0.5 goes to the waiting order discreet block. I think it's because the block takes this value and then use it for the entire simulation, do not check to see if the value has changed. Is there a way to tell the block to check this value at each time step and then adjust if necessary sampling its period?

  See code attached for reference.

  What is your overall goal for the sampling period? You will change the value more than once? Or only from 0.5 to 1?

  The PID setpoint profile should allow you to specify a profile for the values to send to the hold. He will see property values. For example if you specify only t = 0 setpoint = 0.5 and t = 5 setpoint = 1, you'll find it ramp the setpoint in 0.5 to 1.0 for the first 5 steps of time. If you want the sampling period of stay up to t = 5 0.5 is reached you will probably want to three elements in the array. set = 0.5 point t = 0, t = 4.99 set = 0.5, 1.0 = set point t = 5.

  If you're just fill one step, (from 0.5 to 1.0) you can use the Index Timestep in the Simulation parameters to determine the sampling period. Is attached a screenshot of what I mean.

• Is it possible to change the values of particular #define of the various controls in CVI.

  In my application, I have different panels to file single .uir. When I save the .uir file, I get the same values of #define for different controls in different panels. For this reason, I am not able to use these #defines block switch. Is it possible to change the values of #define according to my condition.

  Hi, a little more Wolfgang post. It is the combination of the Panel to manage and control the unique ID: as you know, you can load the same panel more than once, so even if you recover the full chain of PANEL_CONTROL you have duplication. items that exactly identifies a particular control in a particular group are the combination control panel manage AND panel_control ID.

  On the one hand which guarantees more flexibility to your application, you can design only a few panels and reuse them whenever you want, even having some of them loded several times in the same instant. On the other hand, as you have discovered, there is the possibility (Finally, almost certain) duplicated in your app ID.

  To resolve the problem of duplicated IDS you can act in two ways:

  1. If you know that no Panel is never loaded several timer in your application, you can retrieve the name of constant of Panel with GetPanelAttribute (panelHandle, ATTR_CONSTANT_NAME, string); and to distinguish between the name of constant, then switch between control ID

  2. If you happen to have duplicate panels you will need to store each panelHandles in the non-volatile variables, switch between them and then switch between the control ID

  An alternative might be to use Panel callbackData attribute and assign a significant value during the loading of the Panel, other callbackData finally from a control ID. Something like this:

  Loading panels:

  panelHandle = LoadPanel (0, "myfile.uir", PANEL1);

  SetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, (void *) 1);   Assign different callbackData in each instance

  During the failover between controls:

  void * cbkd;

  GetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, &cbkd);)
  Switch (cbkd (int)) {}
  case 1: / / elements of the PANEL1
  switch (command) {}
  case PANEL1_NUMERIC:

  your code here
  break;
  case PANEL1_STRING:
  your code here
  break;
  }
  break;
  case 2:
  // .....
  break;
  }

  One final note: it seems to me that all this is necessary in a very limited situation, where you have the same callback called on various panels/controls. Whenever the reminder is unique to a specific panel or controls on a single panel you don't need to work that way.

• ADF table change the value of a column rest after executeQuery

  Referring to the instance, which is to correct the cause and especially implemented to solve this problem-

  Re: Table ADF with iterator without cache not updated; bug or feature?

  I'll have a search form and the basis of the table of results based on entity vo. The table of results is in mode editall. If I change the value in the inputtext for a line and I click on search again, I expect the value modified to reset. The text component is not autosubmit.

  If I put resetactionlistener in the search button, it works, but it resets then some other components which I don't want.  This makes me think under analysis is tris -.

  'But chooses to render using the value sent instead of the value of the database '.

  What is the correct implementation to handle this?

  Stamped UI components (such as af:table) have resetStampState() method.

  Then you can try something like:

  table.resetStampState ();

  AdfFacesContext.getCurrentInstance () .addPartialTarget (table);

  Dario

• Interactive report - out has changed the value of the column selectlist

  Hello

  I try to use a selectlist in an interactive report. I used "APEX_ITEM. SELECT_LIST' for this. My interactive report request is

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx = > 2,

  p_value = > TEST.

  p_list_values = > ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  I had a "Override" button on the page. I try to get the modified values (for the field "test") and the customer ID selected as a semicolon-separated list just by clicking on the ignore"" button. The process code on submit is

  : P8_TEST_VALUE: = NULL;

  BECAUSE me in 1... APEX_APPLICATION. G_F01. COUNTING LOOP

  : P8_TEST_VALUE: =: P8_TEST_VALUE | « ; » || APEX_APPLICATION. G_F01 (i) | APEX_APPLICATION. G_F02 (i);

  END LOOP;

  But I still get the data value, not the value for column 'test '.

  For example if I'm changing the value of "N" to 'Y' after selecting the checkbox (client code corresponds to "6") and click on 'Ignore' button. I get the value '; 6n 'instead of '; 6Y'. is it possible that I can get the value of seelectlist has changed?.

  Thank you

  JJ

  Your problem is in the values of the selection list. The element is not sent to use in PL/SQL, best way to do it is with jQuery

  try adding this to your report:

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx-online 2

  p_item_id => CUSTOMER_ID,

  p_value => TEST,

  p_list_values => ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  and to add actions to the lick... button or other trigger.

  $x("P8_TEST_VALUE").value ="";

  $("input: checkbox[name='f01']:checked").each(function())

  {var val = $("select [id ='" + $(this) .val () + "']") .val ();}

  $x("P8_TEST_VALUE").value = $x ("P8_TEST_VALUE") .value + $(this) .val () + val + ";". " » ;

  });

  Hope that this post will be useful for you.
  Andrej Grlica

• Change the value of a field when the value of another field changes.

  I have a level of order form with a number of areas where the quantity (number) is typed in they are labeled qty1, 2 and so on.

  Some of the items on the order form attract additional fixed a load which is shown in a separate field call it addcharge.

  If qty1 has a number entered it attracts an additional cost and the addcharge field changes the value of zero to say 1

  If 2 has a number entered without extra charge applies

  If 3 is a number entered without supplement applies

  If qty4 has a number it attracts an additional cost and the addcharge field changes the value of zero to say 1 or if the previous qty1 has already changed the addcharge to 1 field, remains at 1.

  If qty5 has a number entered it attracts an additional cost and the addcharge field changes the value of zero to say 1 or if the previous qty1 and qty4 has already changed the addcharge to 1 field, it remains 1

  
  

  It seems to me that some "if else" enabling javascript is necessary in the sense of "If qty1 field is greater at 0 addcharge field is 1"and I guess the script must be placed in each field which attracts addcharge.»»»

  
  

  Can anyone help with the script please.

  
  

  Thanks Eric
  

  Please sign the right answer. Thank you.