Fill and line in file I don't not knocking out when placed in InDesign (CS4)
I have a built in Illustrator and placed 3 - tones object in InDesign. Two tones are set to overprint in the 'attributes' palette and in fact do this in relation to other layers in InDesign. The 3rd color is on not overprint, which means he should knock out colors below it. This isn't. As a test, I added a 4th point of color in the Illustrator file, on a layer below this spot color 3. Watch the knockout separations printing works correctly in this case. In Illustrator, I read pieces on transparency knockouts and knockout groups, but apparently not that's what I'm up to.
As an aside, I can copy the objects in artificial intelligence and paste them into InDesign and knockouts work very well. I will probably use this as a workaround, but would like to know why the items does not work as expected.
Thanks for the pointers.
w.
I disabled the black in the .ai file and re-recorded, thus he wouldn't show and took a look at identity card, and of course, no knockout, so I looked at the options object for the graphics layer and the layer of fishing was not lit. Since it is the one who is supposed to do to knock out...
Peter
Edit: you seem to have the latest version. Hold the CMD by choosing "On InDesign" in the menu help.
Tags: InDesign
Similar Questions
-
When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."
Hi Scarface0721,
Welcome to Microsoft Answers Forums.
We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.
(a) game in which you try to read?
(b) have you been able to install and play the game before?
(c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?
Method 1:
Try to install and play the game in a different computer.Method 2:
Try another disc and verify if you are able to install the game.Method 3:
You can also post your request in the following forums site.http://forums.gamesforwindows.com/
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Illustrator files sometimes have a white BG when placed in InDesign
What determines if a file from Illustrator .ai or Illustrator .eps file will have a white background when placed in InDesign? Usually, when I placed an .ai file, the background is white, and when I place a .eps file, the background is transparent. But I noticed in the files other people that placed .ai files have a transparent background. In all cases, the imported file's vector pure. I would have preferred that the background be transparent all the time, unless I give the object frame a while fill in InDesign.
If you choose 'Show the Options' on placing your file, you will see the dialog box has an option "transparent background".
(It is unlikely, but yet still possible, that all the files you receive have a white rectangle in the back for real).
-
The download is Win7-P-Retail-en-us-x86.box. I have no software to open it - I'm currently running vista.
See if the article below will help you:
How to create and make Bootable in Windows 7 ISO from EXE Plus Setup1.Box and setup2. Box
http://www.mydigitallife.info/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/Kind regards
-
My 'new tab' button, the ctrl + T and go to file, new tab does not work
When I click to open a new tab, it does not open. If I do ctrl + T, it will not open a new tab. If I go to folder and select the new tab, it will not open a new tab. The only way it will open a new tab is if I click with the right button on a link somewhere on the page and click New tab. It's weird.
And while I'm at it, I went to download firefox 4.o it came with an error page so I can't download firefox again...
This problem may be caused by the Ask.com toolbar (Tools > Modules > Extensions)
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
My usb ports and cd/dvd player will not automatically start when something is plugged on them have to start manually.
Hello
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed?
Follow method 2 in the link below and check if AutoPlay is enabled, a link: AutoRun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive: http://support.microsoft.com/kb/330135
I suggest to fix the AutoPlay parameter by downloading the file below and check the results: AutoPlay Repair Wizard: http://www.microsoft.com/downloads/en/details.aspx?familyid=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en
-
At present 2 sites not open. When I am trying to open these sites to be ' problem loading page or the Web site you are looking for does not appear. These two messages are displayed.
Try to clear your browser's cache.
Tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.
-
Old laptop had Thunderbird. The laptop no longer works, so I took the drive C (SATA drive) and and which plugged into a USB port.
New laptop has installed Thunderbird local folders have been restored. The contents of the Inbox is missing (I use the option ' download server ", so the recent correspondence is here.)
I have three POP3 accounts, so I will try to identify the location of three separate "inbox" and "Sent" folders and add them to the new facility.
Where the files are stored, and what would be the easy way to get back them on the new laptop?
It would be great if there is a more fluid way for disaster recovery.
You could have copied the whole profile and do with it.
To create backups, you should also back up the entire profile. -
After execution of System Mechanic, repairs have been successfully completed. I then tried to launch backup system (three times) and it was incomplete because of file 0 x 80070002. I restarted, System Mechanic is represented, found three errors and corrected. Failed with the same missing file.
Hello
most of us who post here strongly recommends that you do not use Registry cleaners on your machines
they are totally useless and can severely damage your operating system
______________________________________________________________________________
make backups on an external hard drive or DVD
see if this information helps you
How to make a backup of your data (all Vista versions)
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc (Vista, full and professional company)
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
and here is the information of microsoft in restoring a system image backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
_______________________________________________________
also run the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228#appliesTo
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
The find and replace in files results window does not close in RoboHelp 10.
I ran a search / replacement just to locate the help files where the word "codec" appeared. I just clicked on search for anything and did not specify what it is to ' replace by '.
He found two files. I closed the Find dialog box and replace Options, but the results window remains open. It is located on my second monitor, and the upper part of the window is off the screen so I can't click on a close button in the title bar - if there is one.
I closed and reopened the RoboHelp left and rebooted my workstation project. The window remains open. Not only in the project where I did the research, but in each RoboHelp project I tried this opening day.
How can I get rid of this window?
Try to change your workspace to another provision and vice versa
-
Highlight and shadow preview cutting works don't not in LR5
There is a gap between the edge of my information tonal and the end of the histogram of the two sides of the chart area. No matter how light or dark, I do the image it shows no clipping and values do not slip on the distant area banks, as they did. In addition, hold down option when dragging the 'white' and 'blacks' cursors is no longer shows me to cut out the values no matter how light or dark I do not. Ugh... I use these features all the time and feel blind without them.
If you go to the tone curve, and pull the right end, the photo don't cut. Could this be what you were doing? This is a well exposed photo with right exposure + 5 and the right end of the tone curve has gone down a bit to show the effect of a choped off the coast of the histogram.
-
data DB fusion use spaces before and after some words, space don't show in ID when merged
confuse the topic I know...
CS5... My database (excel file converted into a tabulated TXT file) has some entries where there must be a space before or after the word. And the example is "$1000,00 _" with the reprsenting _ where the space will be. Of course when it is brought in ID as a data merge, these areas seem to be deleted. Is there a way so that it can keep these spaces?
When you select or update your data source, click "View options" in the dialog box. Then check the box to preserve the spaces in the data source.
-
License transfer - several pieces of software
Jane,
Adobe licenses should be transferred when changing users. Transfer the license allows the owner to register the software to their name again. Both the author of the transfer of the license and the recipient must complete a transfer of license form. The serial number of the product must be registered in the Adobe profile of the transferor to transfer the license. You must qualify under license transfer policy.
Please visit these links for more details:
Transfer an Adobe product license
Kind regards
Guinot
-
File Adobe Stock vector keeps pixellisant when placed in InDesign
I bought this vector AI on Adobe Stock. Works beautifully in Illustrator (I made a few changes), and that you want to place in InDesign for a poster, but it horribly pixelated that I drag from one program to the other, except in the libraries of CC and drop, save under, pdf, psd or png before placing them. Re-uploaded original version unedited. Don't look at what, the image is perfect until it is opened in InDesign. Then she rasterizes to extreme levels. It seems there will be no change in the quality of resolution or image when I check vital signs. I have not had this problem before. Thanks for any help.
Hi Debra,
If the placed graphic is vector pure without transparency applied after you bought it, it should appear as pixelated when opened in an exported PDF/X-4 document.
Unless:
You rasterizes the vector information through the flattening of transparencies may on export to PDF.
And you did not use the standard preset PDF/X-4. Maybe you have exported to a PDF format requiring its flattening of transparency.
Try the following:
Create a new document.
Place the image on a blank page by using the set command.
Do not use a CC library this time.
Export page in PDF/X-4 (with NO downsampling; you must change the default settings for this).
Open the PDF in Acrobat Pro or Adobe Reader.
Zoom to more than 1000% and make a screenshot of part of the graph that should be as a vector.
Best post screenshot online here.
Use the function "Insert an Image" of the forum to do so.
Kind regards
Uwe -
I made changes to the image of the baby opening his eyes upward, when I copy and transfer the image onto a new background changes to the eyes do not follow. I tried to save the image separately in a new file, I've linked layers changed with no results, changes to the eyes refused to transfer as well as the overall picture. I know that it got a be something very simple, Miss me him. I use Photoshop CC the last updated version.
Thanks for the help.
Alden
If you try to copy the pixels more then a layer you use copy merged copy not right. Copy copies pixels in the selected area in the active layer of the target, fusion copies copies of the composite.
CTRL + C = copy
Shift + Ctrl + C - copy merged
Maybe you are looking for
-
Windows XP Home, and Tecra 780dvd...
Hello don't know if anyone can help me, I have a 780dvd tecra with winXP home installed, and win98SE. I only use XP for my iPOD connection and transfer music, but built in DVD player the 780dvd (sd-c2002 being the number of the disk according to XP)
-
Difference between DAQ and DAQmx for acquisition of data PCI 6534
Hello I use the PCI DAQ 6534 card for my digital I/o transfer. I am beginner in the labview. I want to store the data coming in memory and the reading of the data at the level of the trigger. I have seen the examples in the labview. Some have used DA
-
XP host and client windows 7 on ad - hoc network... Dear friends, I have set up an ad hoc network between two laptops. The host is running on xp sp3 and the client is running windows 7. Now the problem is that if I enable security on the network, the
-
When I stopped my tablet, I have to manually reconnect to the wifi. It does not "sleep", or at any other time, and apart from that it appears to be a stable wifi. I only have this tablet since Christmas, and it wasn't the case when I had first, sugge
-
Application not available in BES12?
I've been doing some reports from users saying that my application is available in BES10, but is not visible in BES12. The application is Term48: http://appworld.blackberry.com/webstore/content/26272878/ I see nothing in the supplier portal that cont