If I enable security on an ad hoc network, my Windows 7 client cannot recognize the network at all.

Similar Questions

• security of dec 24 2009 updated for Windows vista (kb958690) failed. and the security update for windows vista December 24 2009 (kb960225) failed, (kb9772), December 24 2009 doesn't have all three update failed. I want to know a solution to these problems

  I tried three times to updaed with no sloution. I also need updated my browsers to internet explorer 8 with space for 32 bytes. need soultion to this problem too.

  loveforsasha,
  We need more detailed information.
  What version of level pack Windows\service are you?
  What is the error code that you found these updates?
  Other updates have been installed?

  Here is some information, you can begin.
  Solve Windows Update installation issues
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install the update of security for Jscript 5.8 for Windows XP (KB971961), also tried the manual installation

  While were are at it, I have not been able to install this update, guard saying failed, and have also tried manual installation just in case you ask

  A security update for Jscript 5.8 for Windows XP (KB971961)

  See the section "How to get help" of http://support.microsoft.com/kb/971961

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Security customer includes home links page free security update support, too
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot complete the update of security for Windows Vista (KB2961072)

  I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

  I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

• Can I export a password security setting in order to have my co-workers import it using the player?

  We are a small company and purchase of many copies of Acrobat Pro probably won't happen, so what I was wondering is my a copy of Acrobat 9 Pro, can I export a security setting (such as a password to open the PDF file) and import people in their own PDF using Adobe Reader?

  Adobe Reader is a 'Security Import settings' - and I tried to import a security policy password I have exported using Acrobat Pro - it is said that the security settings have been imported successfully, but nothing is happening to the document.

  Any help would be greatly appreciated.  Thank you!

  Player cannot apply security password to a document, so I'm afraid you cannot use the drive to do what you want.

• Windows Defender need to manage the programs that run at startup and enable/disable the programs, but Security Essentials it is turned off. What should I do now?

  Windows Vista Edition Home Premium. Acer laptop. Windows Defender was already on the computer. Installed Security Essentials and it automatically disabled Defender. Problem: I need Windows Defender to manage start-up and turn programs programs (I don't?). I am NOT located with computers so simple to understand, step-by-step answers would be most appreciated. Thanks in advance...

  Hello

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Security Center, to get the message: Security Center service is not started or was stopped. How can I enable Security Center?

  Centre of security gives her box that says the service "Security Centre" has not started or was interrupted.  Please close this window, restart the computer (or start the "Security Center" service), and then open the Security Center again.  I don't have no idea how to do to restart the service "Security Centre", but I rebooted the computer, same results.  Have updated with the latest changes and entries of security from the web site of Ms.  Under XP and IE8.

  Hello

  If I understand correctly, you are faced with the question with the Security Center.  I would like to know more information about the State of the question.

  1. have you made changes on the computer before this problem?

  2. do you use a third-party security software on your computer?

  Let us try the following steps to start the Security Center service; I'm sure this will help you to solve the problem.

  a. press the Windows key + R and type Services.msc and press ENTER.

  b. Locate the Security Center service.

  c. right-click the Service, and then click Properties.

  d. click the startup type and replace automatic.

  e. Click Start and then click Ok to save the changes.

  Also see the following Microsoft article:

  http://support.Microsoft.com/kb/919291

  Please reply with the status of the issue, so that we can better help you.

• How to enable the wireless adapter to Ad-Hoc networks.

  I am running windows 7 ultimate. And I have an adapter Wireless N I have my Htc touch pro that sends a special signal.  I'm trying my darnest to get my wireless card to see. but I can't do. How would I do this on windows 7? How can I activate my wireless card to see my adhoc network.

  Also, I use a home office computer.

  See what...

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• I tried to open the "Add Security Exception" tab and get a certificate, but he says that he cannot get the certificate.

  Firefox is denying me access to Facebook, as well as my Amazon account, as it is said that he cannot trust the certificate. I tried to do what the forum said, will "Add Security Exception" and paste address FB, but it just says: can not get the certificate. This happened only recently, since I've upgraded to Windows 10. Who would have something to do with it?

  It's extremely frustrating, and after using Firefox for many years, I am ready to go to the Chrome or even... Microsoft's new browser.

  Hi AdamQK, in case you are an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Security Center does not recognize the Windows Security Essentials

  Windows Security Essentials does not seem to register with Security Center.  Security Center reports that no Virus protection is enabled.

  1. I installed Windows XP 32 - bit WGA, activated the product and updated to SP3.

  2 security Center starts giving Windows security alerts for Virus protection, because none has been installed.

  3. I installed McAffee VirusScan.

  4 security Center stopped giving Windows security alerts for Virus protection.

  5. I uninstalled McAffee VirusScan.

  6 security Center has resumed giving Windows security alerts for protection against the viruses as before.

  7. I installed Windows Windows Security Essentials and rebooted.

  8. I tried to uninstall and reinstall Windows Security Essentials with no joy.

  Windows Security Essentials installation did not prevent Windows security alerts.  No Windows Security Essentials registry entry will appear in HKEY_LOCAL_MACHINE/Software/Microsoft/Security Center and monitoring.  If Microsoft consider essential security to be an antivirus product, then how to Windows Security Essentials register with Security Center?

  I understand that this is an information and alert issue only.  I understand that Windows Security Essentials works actually ok.  I am particularly concerned by the reports.  It conditions my deployment of Windows Home Server.  Deactivation of surveillance or the alert is not a solution, just a poor quality work around.

  In a previous thread, the author of this question even abandoned and has not requested additional assistance.  An explanation was given (relevant for Windows 7), but no solution has been offered.  Windows XP has not been addressed.   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Security-Center-has-not-recorded-an-anti-virus/15ae2383-7ced-4850-A863-f7eb8cc90ee5

  I had the same problem for a while now (I'm on xp) and have searched the Internet for a solution but found nothing at the moment.

• Firewall settings is enabled, disabled and cannot open the Web page in Internet Explorer: "IE can not display the webpage".

  Original title: how to manually configure the firewall?

  Let me know how I can configure my firewall setting manually as it is said that your firewall setting is disabled. I have HomeXP, SP3. I am now faced with another problem with IE8 when I try to open another page, I find this error-"IE can not display the webpage". Sometimes, it works when it is updated and not some time.

  Hello

  1. do you use third-party security software that runs on the computer firewall settings?
  2. What is the error code / message displayed when trying to turn on the Windows Firewall?
  Please follow these steps in the KB article to turn on the Windows Firewall.
  Step 1
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Step 2
  How to enable Internet Connection Firewall in Windows XP
  http://TechNet.Microsoft.com/en-us/library/bb456986.aspx
  Follow the steps in order and read the content.
  See also,
  
  "Internet Explorer cannot display the webpage" error in Internet Explorer
  
  http://support.Microsoft.com/kb/956196

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  
  I hope this helps.

• essential Windows security cannot delete the file dll.dll

  File below shows that the Trojan Virus, but I can't delete manually or to the basics of windows security.

  Category:

  Trojan Dropper

  Description:

  This program is dangerous and installs other programs.

  Recommended action:

  Remove this software immediately.

  Security Essentials detected programs that may compromise your privacy or damage your computer. You can still access the files that use of these programs without removing them (not recommended). To access these files, select allow, and then click Apply actions. If this option is not available, log on as an administrator or ask the security administrator for assistance.

  Articles:

  file:C:\WINDOWS\system32\dll. DL

  Essential windows Antivirus Security.               I need solution for it. Please respond to this * address email is removed from the privacy *

  Hello

  I suggest that disable you the security software you are system and then run a full scan of the system using the Microsoft Safety Scanner and check if the problem persists.

  Download Microsoft Security Scanner and run the complete scan to remove any threat of virus/malware on the system.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Also enable the security software oonce you have done the troubleshooting steps.

• Why the center of security Windows recently failed to recognize that Virgin security runs on MyPC?

  Hi, until a month ago, I had no problem, but then to start, I began receiving the message from Windows Security Center that my anti-virus was disabled. I spoke with the Virgin and checked myself, antivirus software is enabled. Should I be worried? Gracias

  Hello

  ·         Were there recent changes made on the computer before the show?

  ·         You have more than one antivirus software on the computer?

   

  Method 1:

   

  Follow these steps and check if that helps:

  (a) go to control panel, and then open administrative tools.

  (b) click on services.

  (c) stop these services:
  Windows Security Center
  Windows Management Instrumentation
  SBSD Security Center Service, (if you use Spybot Search Destroy &).

  (d) all allow them to start automatically.

  (e) delete the directory C:\Windows\System32\wbem\Repository

  (f) go to Services & continue all of the above Services or go to the next step.

  (g) reset

  Method 2:

   

  You can also try uninstalling and reinstalling the Antivirus program and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.