Fill in the data in an Excel template (with pre-defined formulas) Oracle

Similar Questions

• Fill in the Date filter quick of dashboard with the current Date

  Hi all
  
  I've seen a lot of discussions in the forum regarding the foregoing, popular topic. However, I cannot yet fill out a guest with SYSDATE or CURRENT_DATE.
  
  I created a session non-system variable and based on the following SQL: SELECT TO_CHAR(SYSDATE, 'DD/MM/YYYY HH24:MI:SS') FROM dual; It does that when I provide a default initializer I also tried setting using the current_date expression builder.
  
  I also tried now(), system.current_time etc...
  
  Can someone please point me in the right direction please?
  
  Thank you
  
  Rhys

  Hello
  Take a peek inside

  SysDate as default value to Date in the fast dash

  Thank you
  Angelique

• Cipher.exe to overwrite the data deleted in Windows works with Windows Vista?

  Cipher.exe to overwrite the data deleted in Windows works with Windows Vista? He worked under Windows 2000, but not sure about Vista!  Otherwise Vista contains a command to clean free space HDD?

  Hello

  you need 3 of third party programs to clean free hard drive space

  For your question:

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• Fill in the Date field to CurrentDate if not entered by the user

  I have this simple condition to enter the Date to current date if it is not entered by the user. In the same way with the time of day. I tried writing below the lines in the document of the rule, but it does not work: -.

  DATE = current date if

  DATE is not known

  Can someone help me with this? I have a screen where the field belongs to several questions. If not entered by the user, the system fills when the user presses the submit button.

  3 things to consider:

  • If the user does not provide an answer to a question of date attribute, this attribute date will be uncertain, not unknown;
  • You cannot define an attribute based on itself - which is a loop of logic and modules does not compile
  • You cannot set a conditionally non Boolean attribute without a rules table.

  My solution would be to ask the user for the value of another attribute (DATE of the USER) and then use it to determine the value of DATE inside a table of rules, as follows:

  DATE
  the date of the day	The USER DATE is uncertain
  THE USER DATE	in the opposite case

  See you soon,.

  Brad.

• Error while exporting the data in an Excel sheet

  Hi all
  
  I created a VO that is based on the query (not based on EO) and the query is as follows:
  
  Select f.user_name,
  f.Description,
  a.currency_code,
  a.amount_to,
  a.amount_from
  seacds.ar_approval_user_limits_nv a, seacds.fnd_user_nv f
  where a.user_id = f.user_id
  and a.document_type = 'CM '.
  order by 2;
  
  
  Based on this original Version I created a search page that searches for and returns the data in the table and the finally export standard button will export data in excel sheet.
  In this research data based on over 5 attributes. Without entering anything in the messageTextInput if I'm clicking on this button, it returns all the data in the region of the table. After that if I click on the button export, data are getting exported to the Excel sheet. It is very good.
  
  But if I'm looking for data by entering a value in one of the messageTextInput, it is returned from the data. But if I'm clicking on the export button then it throws the following error:
  
  The exception details.
  oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: 27122 Houston: SQL error in the preparation of the statement. Statement: SELECT * FROM (select f.user_name,
  f.Description,
  a.currency_code,
  a.amount_to,
  a.amount_from
  seacds.ar_approval_user_limits_nv a, seacds.fnd_user_nv f
  where a.user_id = f.user_id
  and a.document_type = 'CM '.
  order by 2) QRSLT WHERE ((UPPER (CURRENCY_CODE) as UPPER(:1) AND (CURRENCY_CODE like: 2 OR CURRENCY_CODE as: 3 OR CURRENCY_CODE as: 4 OR CURRENCY_CODE as: 5))) ORDER OF DESCRIPTION asc
  at oracle.apps.fnd.framework.OAException.wrapperException (unknown Source)
  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException (unknown Source)
  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors (unknown Source)
  at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest (unknown Source)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)
  in OA. jspService(_OA.java:71)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
  at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
  at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
  at java.lang.Thread.run(Thread.java:595)
  # # 0 in detail
  java.sql.SQLException: invalid column type
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:240)
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:7895)
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7572)
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8183)
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:8206)
  
  Please give me any idea to clear this error.
  
  Thank you and best regards,
  Myvizhi

  Hi all

  I solved the problem... I put the property to select all of the lines as false. So now I'm able to export data.

  Thank you and best regards,
  Myvizhi

• Script to fill in the date field and disable the form

  Hi all

  With little experience of Adobe I was tasked to create a set of PDF forms to use in my company. I drew using Pro forms, but I need a digital signature field that will fill a separate date field at the signing and also disable some of the fields in the form. For the moment I can get it to do one or the other, but I can't do both.

  Is there a script that I can use for these functions?

  Thank you

  KC

  As you have probably seen, there is an option on the signing tab to run a script when a digital signature is applied.

  Do what you have described what follows can be used (of course, you have to adapt the name of the field):

  this.getField("SignatureTime").value = util.printd ("mm/dd/yyyy", new Date()); Enter the date with the current date

  this.getField("Text1").readonly = true; The value of some fields read-only

  this.getField("Text2").readonly = true;

  this.getField("Text3").readonly = true;

  this.getField("Text4").readonly = true;

  etc.

• Automatically fill in the Date fields

  Can you have automatically fill fields date after you have entered a date? For example, if someone has put a date in a field "Date Week Ending ', could other date fields automatically fill in office on that date?

  ZeroZone

  Use a calendar for the first field widget.  Then use the text fields for each date, you need.

  If you wanted to tomorrow's date, enter the first field measurements: (formCalc)

  If (StartDate.rawValue == null) then
  $.rawValue = «»
  on the other
  Num2Date (Date2Num (StartDate.formattedValue, DateFmt (2)) + 1, DateFmt (2))
  endif

  If you want to 7 days of the date selected, change + 1 to + 7 and so on.

• Fill in the date field

  Hi all, I am filling the 'datefield' (cv58) when the 'valid' field (cv55) is set to a specific string in the menu dropdown. I used the following code in the change event of the (cv55).    If (form1. P1.client.variable_option_client. CV55. RawValue == "Validated") and then of form1. P1.client.variable_option_client. CV58. RawValue = num2date (date (), 'YYYY-MM-DD') endif if (form1. P1.client.variable_option_client. CV55. RawValue is "On hold" GOLD form1. P1.client.variable_option_client. CV55. RawValue == not "validated" GOLD form1. P1.client.variable_option_client. CV55. RawValue == 'null') and then of form1. P1.client.variable_option_client. CV58. RawValue = "null" endif this does not pupulate anything in my datefield.  I need the datefield to fill with date of the day when (cv55) is set to 'Valid' else it should not set the date for what either.  Please help Joey

  Hello

  the rawValue applies only when you exit the menu drop down.

  Use xfa.event.newText instead.

  If (xfa.event.newText eq 'valid') then

  Form1. P1.client.variable_option_client. CV55 = Num2Date (date (), "YYYY-MM-DD")

  on the other

  Form1. P1.client.variable_option_client. CV55 = null

  endif

• logic to write business rules for filling in the data since a dataform to anoth

  Hi all
  
  
  What is the logic that I use for data stand from one form to another form
  
  For example:
  
  Plan 1 data of level 0 dataform as complete as plan 2 dataform the parent value.
  
  am not understand what logic I use please help me write this business rule.
  
  Thanks in advance
  
  FYI, SM.
  
  Published by: user13385347 on August 25, 2011 03:29
  
  Published by: user13385347 on August 25, 2011 03:32

  You must give the alias to the location of the cube source within the @xref function.

  An example is

  @XREF("_RevCube_","Prg_Queue","Training Revenue","ServiceType")
  

  See the technical reference Essbase for more details

  http://download.Oracle.com/docs/CD/E12825_01/EPM.111/esb_techref/frameset.htm?CopyRite.htm

  Kind regards
  Brig.

• fill in the data of the table

  Hi, I have the problem on coding when I use the table to display the data in the table. I don't know what Miss me in the code, data appears only in the first row and second row appears empty. I have spent a lot of time to find the solution but I am not successful.

  I need your help. Thank you.

  This is the encoding that puts the button: click

  var part1 = new Array ("A", "3", 78, 9)
  var part2 = new Array("E","2",45,8);
  var part3 = new Array("C","1","14",9);

  var b = new Array("",part1,part2,part3)

  var a = new Array()
  a = form1.page1.Table1.Row1.TextField1 [0];
  a = form1.page1.Table1.Row1.TextField2 [1];
  a = form1.page1.Table1.Row1.TextField3 [2];
  a = form1.page1.Table1.Row1.TextField4 [3];
  
  a = form1.page1.Table1.Row2.TextField5 [4];
  a = form1.page1.Table1.Row2.TextField6 [5];
  a = form1.page1.Table1.Row2.TextField7 [6];
  a = form1.page1.Table1.Row2.TextField8 [7];
  
  a = form1.page1.Table1.Row3.TextField9 [8];
  a = form1.page1.Table1.Row3.TextField10 [9];
  a = form1.page1.Table1.Row3.TextField11 [10];
  a = form1.page1.Table1.Row3.TextField12 [11];
  
  for (var i = 0; i <.) Length; i ++) {}
  for (var j = 0; j < b.length; j ++) {}
  a [i] = b [j] [i] .rawValue;
  }

  }

  Hello

  Try this.

  var i = 0;
  for (var j = 0; j)< b.length="" ;="">
  for (var k = 0; k)< b[0].length="" ;="">
  a [i] = b [j] [k] .rawValue;
  i ++ ;
  }
  }

• How to recover data from textfield, select location and fill in the data of another textfield

  I want to be able to enter a number or text in a field, and then select a location for the data to be placed in the world based on the selected location

  Here's a form Im trying to get to work.

  http://www.myschooljacket.com/OutputLocation.PDF

  Thanks for any help you can lend.

  OK I've got get it now... is your modified sample.

  Paul

• showing a date of entry of the Recordset, how to fill out the dates does not appear?

  I've been several different directions on it, but it can work.

  I'm trying to list a date range as Nov 1-8 November, that is to say Nov1, 2, Nov3, etc., under each date show a COUNTY recordset for this date and if there is no record for this date, indicates 0.

  I have this sql

  mysql_select_db($database_connbubba, $connbubba);
  $query_rs_count = "SELECT yard_sales.yardsale_date,DATE_FORMAT(yard_sales.yardsale_date, '%b %d') AS theDate,COUNT(*) FROM yard_sales WHERE yard_sales.yardsale_date>=CURDATE() GROUP BY yard_sales.yardsale_date";
  $query_limit_rs_count = sprintf("%s LIMIT %d, %d", $query_rs_count, $startRow_rs_count, $maxRows_rs_count);
  $rs_count = mysql_query($query_limit_rs_count, $connbubba) or die(mysql_error());
  $row_rs_count = mysql_fetch_assoc($rs_count);
  

  
  user publishes their yard sales information in the db and the yardsale_date column is date YYYY-MM-DD

  with this configuration, so I have a table with 2 lines (rs_count.theDate and rs_count. COUNT) and the table is repeated horizontally.

  so the result is

  2 Nov6 Nov8

  1 yard Sale 2 Yard Sale 1 Yard Sale

  How can I get

  Nov2                 Nov3                   Nov4                 Nov5                   Nov6                      Nov7                  Nov8

  1 yard Sale 0 Yard Sales 0 Yard Sales 0 Yard sale Yard Sales 0 Yard Sale 1 Yard Sale 2

  Thanks for your help,

  Jim balthrop

  You cannot display the data that do not exist, so you must first create another calendar table which includes all the possible dates. You can then join this table to your main table. Pull on the dates of the calendar table and count the number of sales in your main table. To group the dates table.

• How to fill out the Date and time in the OPS page CO

  Hi all
  
  How to generate the date current system (without using "select sysdate from dual"), in the controller OAF (processRequest) to an OAMessageDateFieldBean page?
  When I use the following code, the month is always displayed in January alone.
  In his display as a page OFA: January 26, 2009 15:46:30
  Using System.out.println: 2009-05-26 15:46:30.0
  
  Kindkly help me in this regard.
  
  Code
  OAApplicationModule am = pageContext.getApplicationModule (webBean);
  SimpleDateFormat f = new SimpleDateFormat ("yyyy-mm-dd hh: mm :"); ")
  String dateString = am.getOADBTransaction () .getCurrentDBDate () m:System.NET.SocketAddress.ToString ();
  
  java.sql.Date sqlDate = new Date (f.parse (dateString) .getTime ());
  
  DateField OAMessageDateFieldBean =
  (OAMessageDateFieldBean) webBean.findIndexedChildRecursive ("currentDate");
  dateField.setValue (pageContext, sqlDate);
  
  System.out.println (am.getOADBTransaction () .getCurrentDBDate (). ToString());
  
  Kind regards
  Joe

  Hey Joe,

  Change the line of code...

  Of

  SimpleDateFormat f = new SimpleDateFormat ("yyyy-mm-dd hh: mm :"); ")

  TO

  SimpleDateFormat f = new SimpleDateFormat ("yyyy-MM-DD hh: mm :"); ")

  It will work...

  Thank you
  Anoop

• Fill in the data in the text field

  Hi all
  Here, I'm a bit confused. In my page, I have three text boxes, they are - P10_YEAR, P10_MONTH, P10_TOTAL. I use LOV for year and month field. LOV is as for the year 2000, 2000, 2001; for the month of June 2001; June, July. ; July and so on. Month field is set to textbox to validate.
  So I want to recover the data in the P10_TOTAL when the user selects the month. Interestingly, it always returns 0, but it should be more than that. I put the Source for P10_TOTAL as PL/SQL Expression * 0 = (SELECT count (*) from rtv_metro_count where record_month =: P10_month); * but it does not work. However, it does not work in the sql query and the toad. I tried to change the SQL query expression, but doesn't work anymore.
  
  Is there another way, I can run this task, retrieve data from the table in a specific text field? Please provide your suggestions.
  
  Thanks in advance.
  
  Djelloul

  Create a process page - on submit using the following code:

  DECLARE
  v_count NUMBER;
  BEGIN
  SELECT COUNT (*)
  IN v_count
  OF rtv_metro_count
  WHERE record_month =: p10_month;

  : p10_total: = v_count;
  END;

  and eliminate the source of pages by assigning static assignment - only when the current value in session state is set to zero.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• can I erase all the data from my old phone with out damaging the data on my new phone?

  My old phone is disconnected from my iCloud, I want to know that the data on my new phone will not erase?

  Provided that you (a) save it to the top and (b) have signed, Yes.