Similar Questions

• Script to fill in the date field and disable the form

  Hi all

  With little experience of Adobe I was tasked to create a set of PDF forms to use in my company. I drew using Pro forms, but I need a digital signature field that will fill a separate date field at the signing and also disable some of the fields in the form. For the moment I can get it to do one or the other, but I can't do both.

  Is there a script that I can use for these functions?

  Thank you

  KC

  As you have probably seen, there is an option on the signing tab to run a script when a digital signature is applied.

  Do what you have described what follows can be used (of course, you have to adapt the name of the field):

  this.getField("SignatureTime").value = util.printd ("mm/dd/yyyy", new Date()); Enter the date with the current date

  this.getField("Text1").readonly = true; The value of some fields read-only

  this.getField("Text2").readonly = true;

  this.getField("Text3").readonly = true;

  this.getField("Text4").readonly = true;

  etc.

• Fill in the Date field to CurrentDate if not entered by the user

  I have this simple condition to enter the Date to current date if it is not entered by the user. In the same way with the time of day. I tried writing below the lines in the document of the rule, but it does not work: -.

  DATE = current date if

  DATE is not known

  Can someone help me with this? I have a screen where the field belongs to several questions. If not entered by the user, the system fills when the user presses the submit button.

  3 things to consider:

  • If the user does not provide an answer to a question of date attribute, this attribute date will be uncertain, not unknown;
  • You cannot define an attribute based on itself - which is a loop of logic and modules does not compile
  • You cannot set a conditionally non Boolean attribute without a rules table.

  My solution would be to ask the user for the value of another attribute (DATE of the USER) and then use it to determine the value of DATE inside a table of rules, as follows:

  DATE
  the date of the day	The USER DATE is uncertain
  THE USER DATE	in the opposite case

  See you soon,.

  Brad.

• Automatically fill in the Date fields

  Can you have automatically fill fields date after you have entered a date? For example, if someone has put a date in a field "Date Week Ending ', could other date fields automatically fill in office on that date?

  ZeroZone

  Use a calendar for the first field widget.  Then use the text fields for each date, you need.

  If you wanted to tomorrow's date, enter the first field measurements: (formCalc)

  If (StartDate.rawValue == null) then
  $.rawValue = «»
  on the other
  Num2Date (Date2Num (StartDate.formattedValue, DateFmt (2)) + 1, DateFmt (2))
  endif

  If you want to 7 days of the date selected, change + 1 to + 7 and so on.

• Automatically fill in a date field as they inspected a box

  I created a form with a number of checkboxes. Each box of concorde at a different stage in a project that is checked when completed. What I would do, if possible, is to add an assinged to date field for each check box that automatically fills in the date in the box has been checked.

  Is this possible and if so, how?

  You must save the PDF dynamic form. See the example file.

  Paul

• How do I scan a document, fill in the empty fields and print the completed document?

  original title: download and information documents.

  My writing becomes very poor due to age.  How do I scan a document, fill in the empty fields and print the completed document?  What other software do I need to do?

  Hi Stuuser,

  I suggest that you use any third party editing program or Microsoft word document to edit any document, and then follow the links below for more information about scanning and printing.

   

  Add or remove a scanner

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-scanner

  Scan a document or file

  http://Windows.Microsoft.com/en-us/Windows-Vista/scan-a-document-or-file

  Scanning: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/scanning-frequently-asked-questions

  Print a document or file

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-document-or-file

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to select .jpg to fill selector background image source property s < style > embeded, window closed until I can choose my .jpg to fill in the url field.

  Not able to select .jpg to fill selector background image property of the source s < style > embeded, window closes before I can choose my .jpg to fill in the URL field in the background-image property. Any suggestions? Thank you!

  Manually, enter it in code view.

  background - image: URL (yourimagepath.jpg);

  It could be a code error, DW requires a valid code / clean for many of its functions to work properly. Run http://validator.w3.org/nu and The Service of Validation CSS W3C validators and clean the detected problems. If that doesn't help, clear the cache program or restore preferences can help.

• Is there one way other than to_char to get the month of the date field

  Is there one way other than to_char to get the month of the date field

  Hello

  raj4tech wrote:

  Is there one way other than to_char to get the month of the date field

  EXTRACT is one:

  SELECT INTERESTED (SYSDATE MONTHS) AS curr_month

  DOUBLE;

• Help with a script for the date field

  Is this possible when the display of a date field is not also: date {EEEE, MMMM D, YYYY}

  then

  Message: "Please select a date from the calendar to the date.

  and focus on the date field

  Thank you

  I thought the event output, if you change the this.rawValue to xfa.event.change, you can try to use the calculate... event, which would mean that they get the message earlier.

  Anyway they will always be able to cut-and - paste a date if it is in the correct format.

  Bruce

• How can I automatically populate the date field after only one "digitally signs" a .pdf form? Help, please! Thank you!

  How can I automatically populate the date field after only one "digitally signs" a .pdf form? Here's a sample:

  _ Digital Signature___ (signs), Date (Auto-remplit)

  Under field properties of the signature on the signature tab, you can use a custom script, like this:

  this.getField("Date").value = util.printd ("mm/dd/yyyy", new Date());

  You know, however, that a digital signature always displays the date and time, it has been applied?

• linking two fields and fill in the two field based on the list drop-down selection box 1

  I work for a small social service agency VERY small non-profit and I try to get our paperwork until the twentieth century. I hope someone here can help me. I have adobe acrobat, but not of other adobe products. I converted our word document that we use for client notes in fillable pdf format and so far everyone is excited to try it. I have a huge problem that I can't understand. I have a customer named created drop-down list box that contains a list of 300 customers. Box 2 is named customer ID and will contain a unique identification code assigned to each customer.

  For example:

  CUSTOMER ID customer JANE DOE 12345678

  So here is my question how can I ensure that when Unetelle is selected 12345678 is already filled in the second field?

  I fill the drop-down list with the names of customer and then enter the customer ID as the value of exports. Note You must have a unique name for each client.

  If your customer ID starts at zero, then you must use a custom JavaScript, so you can keep the zero non significant.

  For the customer ID field, you can use the following custom JavaScript code:

  Event.Value = this.getField("DropBoxFieldName').valueAsString;

  You will need to change DropBoxFieldName name of the drop-down list.

  You will need a mechanism for updating the new customer form and IDs names.

• How to replace a "null" in the date field to zero

  Hi guys,.
  
  I'm a lil stuck with this problem.
  I have a requirement where I need to replace a null value in the date field to zero.
  For example,.
  
  Cancel_date Cancel_date
  20120301 20120301
  20120908 20120908
  value null-> > > > > 0
  
  
  Thank you
  Anita

  Hi, Anita,.

  0 is not a DATE, so you cannot view it in a DATE column.
  There is no '0' display problem in a VARCHAR2 column, so use TO_CHAR to display dates, even if the default format, it's exactly what you want.

  SELECT     NVL ( TO_CHAR (date_column, 'YYYYMMDD')
           , '0'             -- or '       0', if you want it right-justified
           )          AS date_string
  FROM     table_x
  ;
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

• Problems while extracting the hours of the Date field

  Hi guys,.
  
  We hope that you do well.
  
  I am facing some problems during extraction of the hours of the date field. Here is an example of my orders table:-
  
  Select * from orders;
  
  Arrival time of Order_NO product name
  1 computer Office November 20, 10 10:10
  2 November 21, 10 17:26:34 portable
  3 22 January 11 printer 08:10
  
  Earlier, it is stated that the daily number of orders take place in the roll of the order, I used to write a query
  
  arrival_time > = trunc ((sysdate-1), 'DD')
  and arrival_time < trunc ((sysdate), 'DD')
  
  The above query gives me yesterday how many orders have been been held.
  
  Now I have the new requirement to report on every 4 hours the number of orders will be held. For example if the current time is 08:00 IST then the query must extraction from 04:00 until 08:00 how many orders took place. The report will take place at 12:00 IST which will give me an order took place from 08:00 until 12:00.
  
  The report will be run every 4 hours per day and generate report of orders taken place for the past 4 hours. I have a programmer who will run this query every hour, but how to understand to get the order at the request of details who arrived for the past 4 hours. I'm not able to do this using trunc.
  
  Can you please help me how to make this happen. I checked "Extract" also, but I am not convinced.
  
  Help, please.
  
  Thanks in advance
  Aalami

  try something like

  with testdata as (
    select sysdate - level/24 t from dual
    connect by level <11
  )
  
  select
    to_char(sysdate, 'DD-MM-YYYY HH24:MI:SS') s
  , to_char(t, 'DD-MM-YYYY HH24:MI:SS') t from testdata
  where
  t >= trunc(sysdate, 'HH') - numtodsinterval(4, 'HOUR')
  
  S     T
  19-06-2012 16:08:21     19-06-2012 15:08:21
  19-06-2012 16:08:21     19-06-2012 14:08:21
  19-06-2012 16:08:21     19-06-2012 13:08:21
  19-06-2012 16:08:21     19-06-2012 12:08:21
  

  trunc (, 'HH') truncates the minutes and the seconds of the date.
  Extract the hour only works on timestamps
  concerning

  Published by: chris227 on 19.06.2012 14:13

• Calculation of the date fields

  Hello

  I have three fields. 2 are formatted with the date field, and the third for the calculation of the difference between 2 date fields.

  For example, Field1 said August 2012, and field 2 said Sep 2012. Is it possible that I can do field 3 dipslay the 1 (month) response?

  Any help would be greatly appreciated.

  Thank you

  Yes, you use the date object JavaScript extract fields of the whole of the year and the month, create a common denominator for the month and year, and do the math.

  The event of calculation for the number of months:

  Delete the result value

  Event.Value = "";

  get field values

  var sStart = this.getField("Date1").value;

  Send var = this.getField("Date2").value;

  process if we have data

  If (sStart! = "" & send!) = "") {}

  convert date objects date strings

  var start = util.scand ("mmm yyyy", sStart);

  oEnd var = util.scand ("mmm yyyy", sending);

  get the full date and month year beginning

  var nStartFullYear = oStart.getFullYear ();

  var nStartMonth = oStart.getMonth ();

  convert data from start of month

  var nStartMonths = (nStartFullYear * 12) + nStartMonth;

  Get the complete year end date and month

  var nEndFullYear = oEnd.getFullYear ();

  var nEndMonth = oEnd.getMonth ();

  convert data from end of month

  var nEndMonths = (nEndFullYear * 12) + nEndMonth;

  do the math

  Event.Value = nEndMonths - nStartMonths;

  } / / end have given

  You will need to adjust the names for the start and end dates.

• Calendar on the left of the Date field

  By default, the calendar is displayed to the right of the DateField.

  I can get it on the left without rewriting of parts of the DateField component?

  As far as I know is not possible; Only if you rewrite the date field in the date selector (left) + label (right) - If you need to rewrite the code