Filling of camera works does not as expected in Android OS 4.0

Similar Questions

• T440p camera works does not windows 8.1

  Hello!

  My Lenovo T440p is brand new, and I've never used my camera.

  I do not see the camera in Device Manager (there is also no category of imaging equipment). But I have an unknown device on the list of the USB controller.

  In addition, I do not see in the BIOS (maybe I don't check right), but I found an unknown device (number 18).

  I tried to install the latest drivers, but it does not work.

  Thank you!

  Hello

  As I said the problem is definitely hardware. That's what tells me the hardware technician.

  Best regards

• Laptop Sony vaio computer camera works does not after having tried most of the things!

  have a computer laptop vaio from Sony and the camera does not work. I did most of the things apart to take apart!

  It has the standard driver that I uninstalled and reinstalled again.

  I don't have a arcsoft webcam program that many people say is contributing to this problem.

  Operating system is Windows 7.

  You can also try uninstalling and reinstalling the driver for the webcam in compatibility mode, if you have not already done.

  Here are the steps:

  1. Download the latest drivers from the site of VIOS of technical support.
  2. Press the Windows key + R, then on "devmgmt.msc".
  3. Go to webcam driver, then right-click on it.
  4. Click Properties and click the Uninstall tab.
  5. Click OK.
  6. Re install the latest driver in compatibility mode.
  • Right-click on the downloaded driver.
  • Click Properties , and then select the compatibility tab.
  • Click the check box next to "run this program in compatibility mode for: '.
  • Choose the option of Windows 7 on the menu drop-down.
  • Click "Run this program as an administrator".
  • Click apply and then click OK.

  If it persists, you may need to contact your computer manufacturer for help with your concern.

  Thank you.

• BlackBerry Smartphones camera works does not suddenly

  Hi all

  I tried to take a picture yesterday to find that when I select the camera on my phone, I have just a white screen and the camera icon is gray shaded and cannot be hired?

  I always get the flash and geo tagging icon / scene mode icons and I am able to use them simply not capture icon.

  I had a range of different messages arrived saying that another application is using the camera etc and when I select video camera I get the message "the camera is use by another application, cannot start the video camera viewfinder."

  I ran the self test (which was a bit pointless) and he has just confirmed that the camera was not working.

  I tried to pull the battery with the phone on, but that does not solve anything.

  At my phone plugged on charge last night and when I woke up this morning and turned on I checked the camera again and it seems to work!

  I could take a picture and then I just got the blank screen again and were not able to make it work again since.

  I have not recently added all the apps or made any changes to the phone and it seems to have happened completely at random, as I did nothing extraordinary.

  I would really like to solve this problem without having to delete and re install the OS if possible but its is not in good shape.

  BlackBerry Torch 9800

  6.0 bundle 2647 (v6.0.0.600, platform 6.6.0.223)

  Look forward to any help that anyone can provide.

  Thanks for the tips, but for some reason any 9th / 10th (I lost count) battery pull I've done seems to have done the trick.
  Left the battery for an hour and the camera has been authorized since!
  Appreciate your response and good advice

• Backup of Windows 7 - change the settings - works does not as expected

  I'm trying to configure the backup of Windows 7 by using the "Change settings" option, but when I click on the link, all I get is a the Explorer window showing the contents of c:\Windows\System32

  Same thing if I click on the link 'manage space '.

  What I am doing wrong? or is it a mistake?

  Had the same prob, winlocker and shredder in the context menu, uninstalled winlocker and voila, backup now works.
  So, try to uninstall the software that hangs in the context menu (the menu "right click") and see if it works. Not interested in why at that time [is really starting to enjoy my Kubuntu box]

• newText works does not as expected

  Hello all,.

  I am using formCalc.

  My form has a drop-down list box allows this custom text entry. On the change event is a script as follows:

  SubformRecap.TableLiabilityRecap.Row [13]. Cell [1] = xfa.event.newText

  The custom text entered only works when the user:

  • start typing without displaying the menu choices drop-down or completely erases the text of an unwanted choice field
    
  • then, type the custom text
  • AND then press ENTER

  The script fails to capture the newText if ONE of the following actions occurs

  • does not completely erase the contents of the field drop-down box
    
  • or highlights and types on the highlighted text
  • or, use TAB instead of ENTRY when you have finished typing

  When it fails the following text/integer appears in the referenced field: 1

  I have limited user so I guess I could train, however, I would like to avoid that if possible. It's a great form and TAB the norm for the entry and exit of the fields. People use it on their laptops in the field - oddities like this in order to have a major nuisance.

  Is the change the right event? Is there a way to enter (ENTER virtual) script?

  Thanks in advance!

  Stephen

  Well, this problem seems interesting... I tried to rebuild, but nothing never is, for me it works in any case so far.

• handheld at 1 pixel brush works does not as expected...

  Hello everyone :-)

  When I try to draw a simple freehandline with the tool draw we get this before I release the mouse button:

  
  That's how I expect the line to be in the final drawing.

  But instead I get this so after releasing the mouse button:

  

  I'm using this brush settings:

  

  So he must produce a solid rounded 1 pixel brush stroke... In Illustrator CS6 this worked as expected.

  What I am doing wrong? :-o

  All apreaciated advice! :-)

  
  Have a good day, cyan68

  "Einfach" means "without a brush.

  But: the Brush tool will not work without a brush, he always apply a brush.

  The pencil tool is what you want. Really.

  It works exactly like the Brush tool, but without having to apply a brush.

• iSight camera works does not since macOS Sierra upgrade

  strain OK model, it seems that my iSight camera stop working after upgrade to help the Sierra

  I have exactly the same problem, I use a MacBook air from 2012, what about you? NVRAM and other resets do not work, but my camera was well under the previous operating system. The update he screwed up, after reboot it works for about 5 minutes and stops. I created a new user account, the same problem

  A little luck?

• Poster works does not as expected with Adobe CS5

  I've finally updated to OS X on an early 2009 Mac Pro Quad Core. I have two screens: a 20 "Apple Cinema and a Samsung Syncmaster. Previously, always with Snow Leopard, I had no problem with the implementation of my menus, panels, etc on the Samsung, thus leaving my film clean and only to view the picture or painting under development. It's a great ploy.

  But now, I can't have my workspace (menus, panels and so on) to "stick" to the Samsung. Instead, they insist on layering anything I'm working on the cinema, which is now difficult to see behind all the clutter menus and panels.

  I tried to move this to the Samsung, and I saved the arrangement as a new workspace. But the next time and so on, I opened Photoshop, all the menus were back on my film. It is a problem, I expected little, all the problems you may have. But it is serious because I'm not keen on having to pass all the other screen before starting work. In addition, it could be the cause? None of the existing workspaces or those custom made displays on the second monitor except if moved manually.

  I'd appreciate responses as to why this is happening. Thank you

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

• Events in Subvi works does not as expected

  Hi, I'm reposting this question because my previous one did not lead to a satisfactory conclusion.

  I enclose my Vi which do not work as expected. If I remove a Subvi and its controls of 3 partners and two indicators, it works fine, but when I add two screws SUB, it's messy. I'm learning in this way, I don't know it can be done a lot of other ways, but please help me find the problem, do it this way in my final MainVi, I would use Live 8 such void. Thanks.

  Your main problem is the FLOW OF DATA.  A loop can not browse all what it has not completed.  So, as you have, you must have the two structures of event execture before you can go back to look for the next event.  So if you insist on having these subVIs, they must be in separate loops.

  BTW, you can get away with a single Subvi.  Go to the properties of VI and make incoming (preallocated clone).  Then, each call to your Subvi has its own memory space.  Much easier to maintain this mode.

  And I know you said you didn't want alternatives, but here's how you can do it with a unique structure in your main loop.

• HTTP POST works does not as expected

  I can't understand why the POST with data works when I use Firefox, but not when sent from the BlackBerry. The only difference seems to be that the BlackBerry less sends the headers, but it's all legal HTTP.

  It's TCP data are sent to the server (from recorder package):

  ----------------------------------

  HTTP/1.1 POST/page
  Host: localhost
  Connection: close
  Content-Length: 8

  test = abc

  ----------------------------------

  That sounds about right. However, the Web Server table $_POST (PHP) is empty.

  Code follows:

       HttpConnection c = (HttpConnection)Connector.open(connectionString);
          c.setRequestMethod(HttpConnection.POST);
  
          DataOutputStream out = c.openDataOutputStream();
          URLEncodedPostData postData = new URLEncodedPostData(URLEncodedPostData.DEFAULT_CHARSET, true);
          postData.append("test", "abc");
  
          System.out.println("requestData: " + new String(postData.getBytes()));
          out.write(postData.getBytes());
          //out.flush();
  
          c.getResponseCode();
  
          InputStream is = c.openDataInputStream();
          LineReader lr = new LineReader(is);
  
          while(true)
          {
              try
              {
                  byte[] arr = lr.readLine();
                  System.out.println("Line: " + new String(arr));
              }
              catch(EOFException e) { break; }
          }
  

  Everyone knows about similar problems using POST?

  See you soon,.

  Pav

  Update:

  -J' tried this on 2 servers Web (Apache + PHP) unrelated, both have the same problem.

  SOLVED!

  I tried to put different headers that Firefox sends inside the request of BB and it does the job:

  c.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");

  Hope it saves someone out there a lot of frustration :-)

• Lenovo Easy Camera works does not in G510

  Hi all!

  My Lenovo easy camera stopped working. First of all, I tried to update the drivers for device Mananger but he says my drivers are updated, then I tried to install the new drivers manually from the lenovo Web site, but no gain. Can someone please help.

  OS = Windows 8.1

  driver = 6.2.9200.10240

  = Realtek driver provider

  Thank you

  Thank you all for your support I fixed it Technincal support. The problem was caused by the material. now, it has been fixed and works very well.

• BlackBerry Smartphones BB camera works does not @ some point.

  Hello

  I am a user of BB Bold 9900,

  I went on a long trip where I clicked on a lot of pictures using my BB.

  I faced a problem that 4 - 5 times he came this ' camera is used by another application, please close the application and restart the camera.

  When checked the background application has not found something, which will use the camera.

  All were the default.

  Only "take out the battery" has solved the problem and I had to do it whenever he got stuck with the same error.

  Is there a solution for this problem.

  Because it is really very frustrating when you love a particular place and intend to take a picture of that and error appears.

  Only restart is the option too.

  Please guide if anyone has a solution for this.

  Thank you.

  Hi keepthefaith,.

  This article should provide more information about the cause and resolution for the problem you are having with your BlackBerry device. http://bbry.lv/nRqWO2

  I hope this helps.

• Built-in camera works does not after installing the update

  Hi, can someone help me? :) because this laptop my sister after I installed updates, the webcam is not any job? Y does it have someone here will know how to re-enable? Because on the Task Manager, it says that it is suspended? Please help me. A user of windows 8. THANKS in advance for those who could help me get out of this.

  You have installed the Windows 8.1 update yet?  This solves a large number of topics.  In addition, Windows 8.0 approaches the end of support. It will always get critical security fixes, but no updates of the product. So definitely make sure that you begin by installing the platform 8.1 updated.

• Overview DDL works does not as expected

  In the interest of this question, I have 2 paintings in my template and each has been designed from 2 separate schemas.  The paintings are: APEX_DEMO. CUSTOMER and APP_UTIL. ACTIVITY_LOG.  When I go to 'the DOF preview' in the menu context (right click) for each table, I get the following:

  CREATE THE TABLE APEX_DEMO. ACTIVITY_LOG

  (

  NUMBER OF ACTIVITY_LOG_ID

  ...

  CREATE THE TABLE APEX_DEMO. CUSTOMER

  (

  NUMBER OF CLIENT_ID,

  ...

  You will notice that the DOF for each table is the APEX_DEMO schema when the schema of the table, under (general) table properties told APP_UTIL.

  Why does this work?

  I mean it's somehow related to the setting of the preference: Data Modeler-> model-> physics-> default user as

  I can reproduce it now

  It cleared up as soon as I deleted the default user.

  This is the workaround.

  Thank you, I logged a bug.

  Philippe