Backup of Windows 7 - change the settings - works does not as expected

Similar Questions

• On windows xp, wireless network settings icon does not appear and I can't set up my new wireless connection?

  I got a new modem from AT & T because of my Wi - Fi connection failed yesterday. I have new installation internet connection and attempted to establish a wireless connection but the wireless network does not appear. I went under network settings, and there is no icon of wireless network parameters? I don't know what it takes at this point or how can configure my WiFi, that's why I ordered the new modem.

  Hi Cindy20011,

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• I have Windows 8. The address bar does not appear on firefox. How can I fix it?

  The address bar does not appear. How it to appear?

  • If the menu bar is hidden, press in and hold the ALT key, this should make the convocation of Menu bar. Make sure you have the Navigation tools and other visible toolbars toolbar: view > toolbars.
  • If items are missing then see if you can find them in the view > toolbars > customize window.
  • If you see the item in the window customize then bring her back in the window, customize the Navigation toolbar.
  • If you do not see this item then click Restore default set in the view > toolbars > customize window.

  See also back and front toolbar buttons or others are missing and controls to customize Firefox, buttons and toolbars , see http://kb.mozillazine.org/Toolbar_customization

• 15 - ac122tu: the drivers work does not correctly

  I use a computer laptop 15-ac122TU hp. I downloaded all the drivers from the official website of hp, but its still does not. The YouCam software does not start. It says "you don't have compatible VGA hardware or disk to run YouCAm '... I started chess preinstalled on my laptop it displays ' hardware acceleration is disabled or not supported by your video card driver, which could slow down the performance of the game. " Make sure that you have the latest video card driver and that hardware acceleration is turned on. I see that my hardware acceleration is enabled. When I play the movies, he sometimes stops and breaks the flow of the video. Sound quality is pretty low. Please help me soon.

  Hello:

  From what you describe, it seems not that the driver has been installed successfully.

  Try the driver W7 directly from Intel... a 3rd on the list.

  https://Downloadcenter.Intel.com/download/25484/Intel-graphics-driver-for-Windows-7-8-1-10-15-40-

• I use vista home premium.i am the only user. In windows update, change the settings, I noticed information as "some settings are managed by your system administrator" under updates important, I can not access or change the settings.

  recently, I tried to change the reg key by going to "HKEY_LOCAL_MACHINE\SOFTWARE\POLICIES\MICROSOFT\WINDOWS\WINDOWS UPDATE\AU" in the right panel, I changed my reg AUoptions value to 0.

  I'm using norton 360 (ver 2.5.0.5) .no other norton is installed.my subscription will be emds after 865 days.
  
  UH - huh. You have 2¼ ~ years remaining on an N360 2009 subscription. I see.

  In this case, the Symantec Support should be able to help you eliminate the hijackware infection which is causing your problem.

  Good luck!

• Can not change the brightness control does not work

  Hello

  Is IM having sony vaio e15117 possible to control the brightness of the computer

  When the brightness control menu does not work please give me a solution

  Hello Shaik,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted display drivers or incorrect display or power settings.

  I suggest you to perform troubleshooting of power utility and check.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Troubleshooting of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  Please also to update the website of the manufacturer of the computer display drivers and check.
  Reference:
  http://www.Sony.co.in/support/product/sve15117fn

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I get rid of the Yahoo homepage? Changing the home page does not work.

  A week or two before Yahoo started coming as my home page. No matter how many times I change back to Bing, whenever I have rise of Firefox, there is Yahoo as homepage. Does not he back on Bing and clicking ok. I'm a little frustrated by that. How can I get rid of Yahoo to come as my home page when I have asked yet for her?

  Thank you for your time and your consideration.

  Sincerely,
  cbrsarah

  Change the home page when you check only in "Options > general > Startup" or is it a problem with the page that opens when you launch Firefox?
  For the latter, you can check the field target in the Firefox desktop shortcut.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Clean install of Windows 7 but the activation key does not work

  Hello, enter a new installation of Windows 7, the first OS on a new construction of the mine.

  The problem I have is that the activation key will not work, the problem would be
  I use a Windows 7 (updated for Win Vista)? Or do I need a new
  product key?
  Thank you
  Eric

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Display object level settings works does not in CS5

  I can't change the display settings to a level of object in an InDesign document, if I want to change the display settings it will work only at the level of the document. If I try to change nothing to the level of the item arrives. This is a high-performance Windows 7 64 bit with Nvidia GeForce 470, with software to date and drivers, running InDesign 7.0.2.

  I realized what is happening. Your images are in frames pasted into other frameworks, to apply the level of the object display the parameter to 'high level' framework is not affecting the image which is controlled by the setting on the fame that contains the image.

  WASD this document converted from another format, or just built strangely?

• Windows Update failed, the USB ports does not.

  Hi, I had this problem for a while, when the automatic updates try and do updates and they always fail. It of as if he's trying to access some parts of my computer and not private if it fails. Also, when I put a USB ports, you can hear the noise as if they register, but now nothing comes up to open the file. It's like something in my computer is blocking. I don't really know much about this side of computers, and I don't have an antivirus running either at the present time. I can't do a backup or recovery or my computer. But if I could, can't because I need to transfer my files to an external hard drive so I don't lose my business.

  Please help if you know what I can do. Thank you

  and I don't have an antivirus running either at the present time.

  Hello

  In all likelihood, you are infected with malware.

  You need an Antivirus.

  It works just not by mistake, or you have not installed?

  If you have not installed, why don't download you and install Microsoft Security Essentials, which is free, or the free version of Avast Antivirus to keep your camera protected?

  ______________________________________

  Malware scan

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• I am trying to transfer an old profile in Windows 7, but the AppData folder does not appear under my name in the USERS folder. How can I find it?

  When I go to the troubleshooting help and click Open containing folder I get a window of Windows Explorer that displays the path used (s) - Edward-AppData, etc.. But when I click on the small triangle to the right of the King Édouard the menu drop-down does not include AppData, and if I just go in Windows Explorer and the Edward users, there is no AppData folder. So I can't overwrite the profile file with saved my laptop earlier profile information. Case beside Edward symbol has a lock on it, but I don't know what that means or how to unlock.

  %AppData%\microsoft\windows\sendto is the name of an environment variable.
  On XP, this variable points to C:\Documents and Settings\ < user > \Application Data\

  "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden files, use %APPDATA%\microsoft\windows\sendto in the file name field
  See http://kb.mozillazine.org/Show_hidden_files_and_folders

  You can use the help > troubleshooting information > Profile Directory > open containing folder
  See also use the page to troubleshooting information to help solve the problems of Firefox

• MP560 on a Mac OS x networking with Windows 7, recognizes the network but does not print text

  I have a Canon Pixma MP560 connected to a MacBook Pro with OS 10.9.5 which is wire connected to the network via a modem from Time Warner Arris TG862 to a Dell Latitude E6410 laptop computer and a desktop computer, Lenovo, which have two Windows 7. The printer is the USB cable connected to the MacBook and works very well. On the Mac in System Preferences > sharing, printer sharing is enabled, the MP560 put highlight and users > 'everyone can print. " and the system of preferences > printers, Scanners & "share this printer on the network" is selected. On the Lenovo and Dell, I installed Hello, and both can 'see' the MP560 and file > print on both, the printer is recognized and activated. BUT she shoots a white sheet; the text is not printed. Obviously there is something that I did not, any box I've unchecked. I'd appreciate any ideas! Thank you.

  A few days after posting here, I asked this question on another Canon Website and learned that in similar circumstances to mine described here, Canon recommends that the MP560 "be connected to your Windows computer then shared to your Macintosh', rather than, as in my case, saw the MP560 connected to the Mac and then sharing with Windows computers.

• I have improved my all-in-one for windows 8 and the touch screen does not

  Hello, I have an acer aspire one, and I just bought and installed upgrading windows 8 from the Microsoft site. He installed an "auditor of system" 1 who reported a few minor problems, but none of them were associated with wifi or touchscreen. after upgrade both the touch screen or wifi do any work! Good start of Microsoft! Why can't just work? "Anyway - I googled a little and found this is normal and I should have installed a pre-upgrade Acer 1 pack?  Is is true that I can't find it anywhere and I wonder if it exists, can someone point me in the right direction and also let me know if I can install it now that I have already installed windows8! Thank you all

  FReeZA... Thanks a lot for your help!  everything is working now and Windows 8 work well on this machine!  I also had to upgrade the driver for the wireless card get that work and found them on this page as well as the touch driver that you sent me!  Thanks again. http://www.Acer.co.UK/AC/en/GB/content/drivers