Stellite P500 - when installing Win7 Bluescreen rises

Similar Questions

• Blue screen when installing Win7-32 on 7.14 workstation (linuxhost)

  Hello!

  I installed VMWorkstation 7.14 (VMware-Workstation-Full - 7.1.4 - 385536.i386) on ubuntu 11.04 (32 bit, 2.6.38 - 11-generic-pae, ubuntu gnome classic) and you try to install a virtual machine the ultimate win7-32.

  When installing win7 - Setup stops with a blue screen, MEMORY_MANAGEMENT STOP: 0x0000001A.

  I tried different DVD Win7, but breaks up with the BSOD all the time installation and already checked the laptop computers (Lenovo Thinkpad x 201 (5413-FFG) 8 GB of RAM, they seem to be fine.)

  Also installed WinXP-SP3 without any problems in a virtual machine...

  No reference to what has gone wrong?

  Kind regards

  BigMac

  view the vmware.log which was created during this installation attempt

  affect you very little or too much RAM?

• Satellite L500 (PSLS0E) - HARD drive not found when installing Win7

  Hello!

  I wanted to install a new Windows 7 (without recovery), but the hard drive was not found during installation. In the start instead menu I can find the drive. So what I need is a driver. But I have no idea where to get one! Can anyone help?

  Version: PSLS0E-06T01KGR

  THX

  Now maybe stupid question but are you using the original installation disk Microsoft Win7?

  I installed Win7 on several different Toshiba laptops (old and new) and HARD drive was visible every time. I deleted existing partitions, created a new and correctly installed Win7 on it.

• When installing win7 migration software

  How to keep or transfer all my current software off my HP laptop when or before doing a clean installation of Windows 7 not and the upgrade I have a rc og windows 7 and want to install but don't want to lose all my software that is preinstalled on my laptop which is running Vista 64 bit and will be upgrsading for Win 7 64 bit , what can do to reinstall this pre installed that came with my laptop I did the restore disks however those restore to version orifinal where my laptop was sent to me is not good ideas?

  C:\swsetup contains driver and app installers. Copy what you want to keep this file on a dvd.

• "Load driver" error when installing Win7 on Satellite C665

  My hard drive in my laptop died on me, so I'm a new hard drive (Solid State) and installed Windows 7 top on my Toshiba (Satellite C665 model PSC55A)

  I don't seem to be the only ones to encounter this error: "A required CD/DVD drive driver is missing. If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now. "However, everyone seems to get for different reasons and I have tried several things.

  The first manifests itself: use the disk I got with the laptop. I moved homes since I bought the laptop. Looked through all the boxes in the House and and I think it can be lost in oblivion.
  The next most obvious: load the drivers of Toshiba support. Tried that. Does not work. Don't know why, but I downloaded the drivers from Toshiba, extract them, put them on a USB key. Seen in "Install Windows" in a list of all the drivers. I try to install each one, it passes through all. The end of it still does not work.
  Next: download Windows 7 USB/DVD tool. I read that this would work, so I tried it, and it didn't.
  I also read BIOS, 'Disable AHCI mode for your drive in the BIOS OF THE system controller', I'm not the greatest, so I can't have gotten this right step, but the only time where I found the AHCI in the BIOS I couldn't change to IDE or ATA as suggested, I could just change it to "compatibility".

  Thank you for your help, I hope I don't sound too desperate.

  > I found AHCI in the BIOS, I couldn't change it to IDE or ATA as was suggested, I could just change it to "compatibility".

  It's a good... you can switch the SATA AHCI mode or in compatibility mode.
  In AHCI mode laptop requires the SATA driver to see the SSD or HARD disk drive. In compatible mode HDD/SSD drive should be visible during installation of the system, but the HDD/SSD drive would operate in IDE mode means the player HDD/SSD would be slower.

  But if I understand the detachment, ve you had problems with CD/DVD player. Is this correct?

  It was really strange because installing Windows doesn t need drivers ODD (optical disc) the configuration of the installation contains common CD/DVD player that controls the disk drive.

  I read in other forums that this problem could be related to faulty Windows installation disc. It would be interesting to know if you can use another drive to install the system

  I also found this MS knowledge base article:
  ["Required the reader driver CD/DVD is missing" or "needs a driver your computer media is missing" appears when you install Windows | http://support.microsoft.com/kb/2755139]

  The reasons can be:
  The installation DVD is removed during the installation process.
  A bad quality DVD has been used to create the installation DVD.
  The speed at which the installation DVD is burnt was too fast.
  The DVD drive cannot read media.
  The ISO file is corrupted.

• Compatibility report when installing Win7 on laptop OS Ubunto

  Pretty much what the title says. I have a PC notebook Toshiba Satellite L300 - 16 L with 3 GB of ram upgraded, it was initially running Win Vista then I upgraded to Ubuntu 12.10 but my mother although windows is more suitable for her, so she asked me to replace Ubuntu with Win 7. If during the installation of win 7 I chose ' update now ' and I was brought to the compatibility page saying "'this start the computer using the installation disc." "Remove the drive and start Windows normally, then insert the disc and continue the upgrade" and could not continue the installation. I did some research and found a few forum thread such as 'This', I followed the solutions that people posted on the wire (uninstall drivers and 3rd-party programs) but always without success. Please help me.

  I appreciate any guidance you can give me.

  If you need more information, please just ask.

  Thank you very much
  -NG

  First of all, you can not pass an operating system based on Linux to Windows 7, they are incompatible, your only option is to do a custom clean install.

  If you have personal files in Ubuntu, you must save your file.

  Boot from the Windows 7 DVD

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Satellite A300 - restart of the equipment when installing Win7

  Hello

  I have laptop Satellite A300-24Z, and I try to install windows 7 on it, the installation of the computer restart or get the bottom blue screen (not BSOD) and stuck.
  It s is usually spent on extraction of the files step.
  Help, please

  PS
  It s not a hard drive, I have already replace without a bit of luck

  Hello

  You can install another system of Windows Vista or XP for example or you have the same problems the other systems?

  However, to check if the default BIOS allows you to install Windows 7
  In addition, try to set the SATA mode in compatible mode or AHCI.

• problem when installing win7 lack of mass storage driver

  Dear Sir

  I have a problem during the installation of win 7 in HP PAVILION DV6700

  This laptop has been using vista so I want to change to win 7

  his wonder MASS STORAGE driver

  so I need this driver to install windows7

  Thank you

  If you need drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string like this PCI\VEN_1217 & DEV_7130 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• My laptop froze when installing win7 sp1

  The computer froze 8% full.  The display shows: step 1 of 2, Service Pack, 8% complete configuration, do not turn off your computer.  No error code, just frozen.

  Hello
  • What is the antivirus installed on the computer program?
  
  Step 1:
  I suggest you to disable any program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.
   
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
   
  Step 2:
  I suggest that you put your computer in a clean boot, try to install service pack 1 and control.
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  Reference:
  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  It will be useful. Let us know for help.
   
  Kind regards
   
  Ramata Thakur.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• A frozen (for more than an hour) when installing Win7 updates

  During the installation of updates during a restart, IQ506 froze, although few 'circle' still rotating, for more than an hour so far.  Message says not to put off, but nothing happens.  Where should I go from here, if I am not in power down?

  A few times just to give up and put off, I look at the HD indicator, if it goes 30 minutes without blinking I give him a strong power off, if the HD is flashing I will usually let it run all night

• Error code 0 x 80070750 when installing Win7 on an OEM DVD

  I bought a new DVD Win 7 to be instslled on a laptop computer with a new hard drive. The hard drive has been formatted to NTFS. No made partitionswere. After 80% of the entpacking error code 0 8007050 x. I have some forums, the problem must come from a default memoy. RAM from another laptop without success.

  What can I do else?

  First run Memtest86 +: 
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Laptop 15-AD129DS: installed Win7 on 15-AD129DS-lack of Driver: Acquisition of PC data and Signal Processing controller

  I recently installed Windows 7 on my laptop HP 15-AD129DS.  In the Device Manager miss me the driver for PC Data Acquisition and Signal Processing controller.   There is also an unknown device without driver right below in the section "other devices."

  I understand that this ususaly installed with drivers from the chipset.  But it didi not install in two different tests when installing Win7.  The Intel site seems to be of no assistance, or their driver utility.

  Can you lead me to the correct drivers?

  Thank you in advance,

  Mark

  Hello:

  Have you tried this driver?

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75506.exe

• Impossible to install Win7 on my Qosmio F50

  Hello
  I hope you can help me in my problem. I have laptop old model Qosmio F50 - 10G #. PQF55E-00V012AR. It is installed windows vista Home premium. For my desired to change my OS to windows 7, I reformat real proper installation.

  the problem is, it can be install any OS same win XP and win Vista.

  Windows Vista and Windows 7 this page that I load the hard disk system. It cannot detect the hard drive. I'm trying to install the driver AHCI of it but his failure, now, even windows xp cannot install, it's error when he reach windows boot.

  What can I do if I installed an operating system?
  Help, please.

  I put t really know what the problem is here. By default the BIOS settings and try again to install Win7.
  Do you use the original Microsoft installation disc?

  Start your laptop and press F12 to get into the boot menu. When the menu is displayed on the screen put Win7 disc in ODD, choose the CD/DVD drive and press the button enter.

  What happen exactly when you do this?

• Impossible to install win7 on a Tecra A8 with ssd

  Hi all

  I am trying to install win7 on my Tecra A8 PTA83E and I have the following problem
  -If the drive is a normal hard drive, then installation is complete OK
  -If I change the disc with an ocz vertex turbo SSD, then the installation will stop, at the time when
  Win7 try to unpack the installation files in the disc with an error message "file not found" or similar. "

  I've been reading about SSD in the web and the prime suspect is the IDE - SATA in Bios mode, they
  all you suggest changing the IDE - SATA mode to AHCI mode. I look in the Bios in Toshiba Utilities
  and not found anything.

  Anyone know how to change the mode in the Bios, if course is supported?
  Also, someone installed win7 SSD in other models and have any suggestions?

  I'd appreciate any suggestions.

  Hello

  As I know the BIOS Tecra does not support this option.
  But it s not no need to change something in the BIOS because the Windows 7 contains the necessary SATA drivers.

  However, I think you should check the SSD manufacturer support page that maybe a firmware must be updated

  I also recommend the formatting of this SSD again maybe it helps

• Impossible to install Win7 on ENVY 15 t-j000

  I recently bought a HP ENVY 15 t QUAD - E4T17AV

  It comes with Win8 and I honestly can't stand it. Trying to reinstall with Win7, I am unable to find discs to install to. I searched the devmgr win8 to get information about the SATA controller and chipset. I downloaded the drivers and when you attempt to add during the Win7 it found the drivers that are compatible with my system, but when I try to install I get the error ' no new devices not could be found.

  I enabled legacy startup options, disabled secure boot, changed the boot order, all that good stuff.

  I tried to install SATA drives both mSATA connected, that only have one or the other and receive the same error each time. I used several different drivers of HP and Intel, and all receive the same error.

  I read the other messages from people who say that they install Win7 on their 15 t, it must be possible.

  What Miss me?

  Thank you.

  Had the same problem... figured it out... it was not a Sata Contorller driver problem at all.

  1. turn off Secure Boot, active herit.

  2. turn the USB 3.0 BIOS to act as AUTO setting so that the operating system facilities to qualify ports USB 2.0 compatible

  3 HD partition scheme had to be reset... don't know what it was.  Hooked to my Mac and under parition, set it to 1 Partition and chose the MBR as the partition table layout scheme.

  Hope this helps, but still the problem with the graphics drivers from Nvidia and Intel Chipset drivers