Film Windows maker-impossible to edit clip

Similar Questions

• Impossible to publish a wswmm on computer or dvd into a video file with windows movie maker, after the edition of a major project

  Impossible to publish a wswmm on computer or dvd with windows movie maker, after the edition of a great project - error message stating "cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again"

  the source files are all there and I have more than enough space... Please help (project video wedding!)

  Thank you thank you thank you...

  chop my project and publish it on computer, mix files together on the creation of dvd windows... it worked!

  you saved me break my laptop into 1 million pieces... thank you once again!

• Windows Movie Maker is cut my clip.

  I have a minute 11 long clip that I have the color corrected and transmitted quickly using Adobe After Effects. Later I put it in Windows Movie Maker to put everything together but after about 5 minutes of game screen just went clip all black with no audio either. This never happened before do - what I do?

  You can also check and make sure that the clip is not cut.
  Click under timeline to expand.
  Go to video, right click on Audio and check to see if the mute setting is enabled.

  I hope this helps.

• How to make a dvd of clips using windows dvd creation

  How to make a dvd of clips using windows dvd create?

  Depends on what format they're in. If theyre not in a creation of dvd format can load, you will first need to convert them with something

• Why my windows Vista Basic Home Edition would begin to make a backup of my hard drive without asking him?

  Original title: disk backup hard without my asking for it.

  Why my windows Vista Basic Home Edition would begin to make a backup of my hard drive without asking him. I backed up my files a couple of weeks and asked for another. More on this isn't a function that can be made on a calendar. You must specifically ask to be able to back up your files. Am I being hacked? If yes what should I do?

  Why my windows Vista Basic Home Edition would begin to make a backup of my hard drive without asking him. I backed up my files a couple of weeks and asked for another. More on this isn't a function that can be made on a calendar. You must specifically ask to be able to back up your files. Am I being hacked? If yes what should I do?

  Hey sharilanton

  Windows vista Basic can back up your files on a fixed schedule

  but vista Basic does not back up files of complete hard drive only

  read below how many times you want to creat a backup

  http://www.vista4beginners.com/how-to-backup-your-data

  Walter, the time zone traveller

• Windows Movie Maker-impossible to capture videos

  Movie Maker has been so easy...

  I almost gave up.  It was so easy with Movie Maker XP to create quality DVD videos.  Less than 7, I can't capture anything.  I had to buy a new webcam.  My old HD quality video camera is not recognized.  Previously, I spent about 3 hours to create a pleasant 10-minute video edited with pieces imported to import to a well know video sharing site.  With Windows 7, I've probably spent 40 hours and I can't say that I have 1 second of captured video yet.  Unfortunately, my next purchase can come from a competator...

  Unless I can get Windows 7 to recognize my camera, I'm going to have capture my video using a XP machine and then save on a USB stick and transfer it to my Windows 7 computer.  Once this is done, I can import into WMM 2.0 or 2.6 (I have two now).

  I wonder if I could pass in "XP" Mode and get the machine to recognize my camera... I might have to experience this. Not the best solution, but perhaps viable work around...

  =======================================
  If you happen to be running Windows 7 Professional, ultimate edition
  company or... XP mode may be useful to experiment with. :

  Install and use Windows XP Mode in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Xbox 360 and Windows XP Media Center Edition 2005

  Hello

  Hoping to get help with this, because I searched everywhere and had not found an answer.  All the work around the items, reference Windows 7 and 8 not XP my Dell Dimension C521 shipped with Windows XP Media Center Edition 2005 pre installed.  I've upgraded to SP3 of XP.  A friend of mine gave me his old Xbox 360 (bought a new unit).  When I try to connect to the XBox 360 I get an error message in media library "uninstall the update for media center 2005 and then re-install the update of the site Web of Windows update.  Then, re-run Setup for Xbox 360'

  I checked in my under settinds program control panel, but don't see any element for Media Center 2005, even with show checked all of the updates.  I don't see Media player listed and 2 updates for it.  I have disabled the Windows Firewall did not help.  The Xbox 360 test shows that I can connect to the internet, Xbox Live (no NAT problems) and PC running Media Center.  It fails on the media center connection test.

  I don't want to reinstall all of the Dell backup image software supplied with the camera, I'll have to back up and start over.  Any help is welcome!

  Thank you

  Matt

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  I suggest for the link and follow the steps in the article:
   
  Error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005"
  http://support.Microsoft.com/kb/954622?WA=wsignin1.0
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.
   
  Also see Help links:
  Turn your Xbox into Windows Media Center Extender
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Extender-for-Xbox
   
  http://support.Microsoft.com/ph/7024
   
  Windows Media Center on the Xbox 360
  http://support.Xbox.com/en-us/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Info
   
  I hope this helps.

• Windows XP Media Center Edition computer will not start.

  When it starts, I get a BootMagic screen that allows me to choose the normal Windows operating system or partition DOS6. The next screen is text offering choices such as: Safe Mode, last known good Windows, normal windows, etc. None of the choices do something else that restart the boot process.
  I have backups of the C: drive in real Image files and ntbackup. I would like to make a bootable cd or dvd with the files needed to be able to copy the data on another dvd or on the local network to another computer. This computer was made by the gateway. No real installation CD were provided, just a "operating system Disk' which is of no use. The disk has been partitioned as C: D: K: etc. I added a 40 GB IDE drive, which is where half the data is I want back. I can 'see' readers when I boot from an old CD disk to Image, but may not see the LAN or write in the CD burner. Basically, should what files I put on a cd to boot?

  Well, almost a month since the gateway computer's dead, and I do not have anything on it. Spent a lot more time for the new computer with Windows 7 to run my most used programs: WordPerfect and Lotus 1-2-3. According to me, that you gave me a choice when I reinstalled Windows 7 to use either 64 or 32-bit. If I had a choice, it is 64. At this point, I wish I had chosen 32, due to all the incompatibilities resulting in 64. I doubt that there are real benefits for me. One thing they point out is his ability to deal with > 4 GB of RAM. This computer has 2.

  What I installed was XP HP discs received with a laptop period of 2002. Probably violates some policy Windows, but my rationalization was that bridge should have on giving me the opportunity to re - install the Windows XP Media Center edition. I prefer to get this OS works because it has a smooth operation built in encryption system.
  I tried to use the provided gateway recovery cd again, but not long after starting it fails with a 'memory overflow, please insert another disk' message. Gateway support has not been cooperative, so I can try again. I think that they have it for me.

  The XP system is running on a 40 GB IDE drive that I had added to the computer. There are too many error messages trying to install an operating system on theoriginal 250 GB SATA drive. Usually the installation of software did not see the SATA drive. He is currently disconnected. It work pretty well in the new computer from HP in the 2nd SATA slot for to retrieve me my data.

• Re-installed Windows XP Media Center Edition 2005 with TechNet discs and now the product key on the computer does not work.

  I have a client who has a Dell Dimension E510 with Microsoft Windows Media Center Edition 2005.  Failure of their hard drive, so I installed a new hard drive and reloaded Windows XP Media Center Edition 2005 collection of Technet.  I'm now start using the Microsoft key update tool to update the product key in the product key of the client on the system chassis.  Unfortunately the Microsoft key update tool is not supported in this version of Windows XP.  The client doesn't have their media.  Any help would be appreciated.

  original title: Question of key product Microsoft Windows Media Center Edition 2005

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Of Windows Media Player 11 in Windows XP Media Center Edition (SP3)

  I AT & T U-Verse, and I am trying to download video clips at home in my online account so that I can display on the TV.  When I select the option on the TV using the remote control that would search my computer for the files, I get a message that I need to select sharing on Windows Media Player 11 before U-verse can download files.  I have Windows Media Player 10 on my math so I went online to download Windows Media Player 11.  During the download I get the message that I have Windows XP Media Center Edition 2005 version and I have Windows XP Media Center Edition version 2002 Service Pack 3.  What should I do to download Windows Media Player 11 with success?

  The link above for the forum of social responses seems to be an incorrect link. I can find no record of a response.

  You will need to start your own, new topic in this forum and ask for help with your problem, whatever it is.

• Cannot open files with Windows XP media center edition .exe

  Cannot open .exe with Windows XP media center edition files.  Computer Dell did not come with a rear disc

  Hi CLueking,

  1. what happens when you try to open any .exe (executable) files? You get the error message?

  2. you remember to make changes to the computer, after which the issue started?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.

• Need to download Windows Vista Premium Home Edition

  I had to erase my laptop and now I have re - install everything.  I have Acer Aspire 5100 restore counter but nd disk is bad.  So now that I need to download Windows Vista Premium Home Edition - I have the product number.  I try to complete this Christmas Eve.  I'll give this laptop to my grandson.  So, I wanted to start all over again and had to get my data out of the laptop.

  I had to erase my laptop and now I have re - install everything.  I have Acer Aspire 5100 restore counter but nd disk is bad.  So now that I need to download Windows Vista Premium Home Edition - I have the product number.  I try to complete this Christmas Eve.  I'll give this laptop to my grandson.  So, I wanted to start all over again and had to get my data out of the laptop.

  Hey mklafert

  Sorry for the eve of Christmas, but there is no legal or free vista doesn't download only internet pirated versions that you would not want t for a gift

  I suggest that you contact acer and ask them to send you a set of disks of replacement for recovery of the acer link below but it will take time

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  But if you can borrow a microsoft dvd vista not acer hewlett-packard or the like discs of recovery of a friend or relative you might try to install vista in this way using your product outside of the laptop case key to install the family version correct vista premium of the dvd, and then go to acer and get the right drivers for your computer laptop model number

  Just make sure you get the good dvd vista

  There are two microsoft vista DVD produced is 32-bit and the other is 64-bit

  most of the computers came with 32 bit installed unless he asked a 64-bit

  and if you happen to also have a recovery on your computer partition acer laptop, you can start the recovery to factory standards by pressing Alt + F10 at startup

  There used to be a password you need to enter too

  It was 5 or 6 zeros

  If necessary, contact acer for this information

  I hope that you have a happy holiday season

  Merry Christmas

  Walter, the time zone traveller

• After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this?

  After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this? all past images 03:00, but the video clips don't.

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Make a movie in four simple steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-in-four-simple-steps

• Windows Vista Home Basic Edition keeps looping and will not start

  Windows Vista Home Basic Edition will not boot to the Welcome screen. It keeps restarting loop. I tried to go into safe mode, but who does not start too. Loops of safe mode and return to the start screen.

  I have a dell laptop and I just restalled operating system. I had Windows Update set to automatically download and install. PC worked great until the next day (after the time programmed for automatic updates). I'm assuming that the started after some windows updates when installed. Unfortunately, I can not enter in Windows or Normal or Safe Mode.

  Bill

  If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner