Filter Organizer works is not in the folder

Similar Questions

• How can I find an agent I chatted with that? The email with a link that he sent said my e-mail address is not in the folder, and my computer doesn't have internet access once it has access to my office.

  I had the technical support to help me access the internet.  It was slow in response and doesn't seem to understand what I needed.  Invited access to my office, and at that time, I was tired of him saying the same thing over and over again, so I went offshore.  Then I found that my computer doesn't have internet access either.  I tried to find him, found the email that he sent but when I clicked on the link and put in my email address as requested, the answer says that my email is not in the folder (!)

  Question: is there a live person I can talk to about it?
  My question: 1) my internet access definition had been changed, folder 2) microsoft says my email address is not registered.  The service ID was 1158399549ID SRX.  I think it is ridiculous that a SRX is sent to my email address and then says that it is not in the folder.  (3) when I asked for help and put in my product ID, message indicates the product is not taken in charge in the country, USA.  What is going on?  Where the product is supported then?
  Can someone please help and explain that to me?

  Hello

  I'm sorry but this is not Microsoft

  These are public Forums, hosted by Microsoft

  We are mainly users of vista companions giving free help in our own free time

  I suggest that you raise your point of contact with Microsoft

  Owners of OEMs (Dell, HP, etc.) are not eligible for free Microsoft Support

  If the above is you, this is why your product ID is not working

• USB doesn't work is not on the external hard drive

  I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!

  Hi Chaser07,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you try to use an external hard drive on another USB plug and check if it works.

  Method 2:

  Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click run now in the link below to diagnose and fix problems automatically.

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Check whether the problem is resolved.

  Method 3:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Check whether the problem is resolved.

  Method 4:

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• I have a problem bookmarking websites, I do not see the folder I chose to add them.

  I have a problem bookmarking websites, I do not see the folder I chose to add them.

  You would need to double click on the STAR on the bar of address and then choose the FOLDER, wanted to bookmark the link.

• HP Pavilion: Touchscreen doesn't work is not in the browser

  My touch screen stopped working specifically in Chrome.  It seems to work everywhere else, including IE.  It's probably a frame in Chrome or something on the computer settings I managed to accidentally change?  Thank you!

  Hi there @jexylou,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.

  Open chrome

  Put this in the address bar: chrome://flags/#touch-events

  Change the setting "enable Touch events" "Automatic" to "Enable"

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• photos went to the Gallery of photos, but not in the folder of photos, why?

  When I downloaded my photos from my camera SD card in my computer photos went just to the photo gallery, not to the folder of photos.  This is why when I try to send pictures via my gmail account I gives me only the choice of the photos in the pictures folder.  How can I get these photos in the photo gallery images folder?  I'm using vista Home premium and I've never had this problem before.

  Thank you, for some reason any, he went to my folder of Tasmania.  Now, I found the photos how to make them out of this file and in another file?

  =======================================================
  Select (highlight) all the photos you want to move.

  Right-click on the selected group and from the menu, choose copy.

  Navigate to the folder you want the files saved in and right click / Paste.

  Once you are "positive" that the files are copied safely in the new location
  You can delete them from the previous location.

• Search works is not in the people app

  When I search in the people App, I have 'no result '.  I tried to uninstall and reinstall the suite app people.  Is there any solution for this?  I should be able to search a person's name.

  Hi Jim,.

  Welcome to the Microsoft community where you can find all the answers related to Windows.
  
  According to the description, you are having problems with the search function doesn't work is not in the people App.
  Proceed as from the link below and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
   
  Answer to us if you are having problems with the people App or any other issue of Windows, and we would be happy to help you.
   
   
  Good day!
   
  Hope this information helps.

• I installed 4 times Photoshop elements 14 in french a dvd or an online version: the Organizer menu, but not of the editor is always in English: where is the problem?

  I installed 4 times Photoshop elements 14 in french a dvd or an online version: the Organizer menu, but not of the editor is always in English: where is the problem?

  Try this Photoshop Elements forum

• LR5-can not find the folder "my pictures."

  I got LR for several years now and am on LR5. I did have problems until recently.  My LR can NOT find the folder "my pictures."  It will not!  I tried to watch all files with no luck.  I have spent literal hours online and no luck.  I'm desperate.  Help, please.  I tried everything and no luck!

  Beth

  Where the reason that Lightroom can't see it!

  File Explorer has an option for "Show Hidden items" If you can find it in the menu of the file Explorer.

  Windows-10 now on the Ribbon of "display" -.

• Variable presentation doesn't work is not in the filter using expr

  Hi friends,

  I have a quick period with a variable presentation of the v_period used. Inturn, so I applied formula below one of my measure column in the analyses below the means, it does not work when I select the name of period of command prompt. How can I place the presentation variable from the prompt for the filter with expression.

  FILTER ("Fact_GL_balances". "Actual_ending_bal" for HELP ("Dim2_GL_periods" ".") " Period_name' IN ('v_period')))

  Kind regards

  Saro

  Hi, Saro,

  I think the correct syntax when you use variable presentation would be:

  FILTER ("Fact_GL_balances". "Actual_ending_bal" for HELP ("Dim2_GL_periods" ".") " ((IN Period_name' (@{v_period})))

  OBIIE does not generate the correct syntax when you use the expression builder

  And if v_period can have multiple values, you should use this:

  FILTER ("Fact_GL_balances". "Actual_ending_bal" for HELP ("Dim2_GL_periods" ".") " ((Period_name' IN (@{v_period} [' @'])))

  I have not tried in my OBIEE because I need to filter a Dimension column, so I have to use CASES instead of FILTER, but this is my reference:

  Q & A: OBIEE OBIEE 11 g: presentation Variable initialization in a multiple selection prompt

  Concerning

  Ana GH

• CD/DVD drives not working only not on the two PC running Vista, heeeeeelp!

  Hi guys, two PCs, which is new, both running Vista decided that the installed CD/DVD readers shouldn't work!

  The new PC reads a CD/DVD when inserted (lamps flash to recognize this is something), then nothing (Autoplay is configured to use iTunes ) so I'm going to, click on 'Computer' on the disc, and he says "insert a disc into the DVD drive (f) "

  So, I installed the MS auto fix jobbie and it says ' insert readable media...» "I've had (several store bought CD and DVD all failed to save) then I tried to search the upper and lower filter using regedit, but there is no file with this name in the folder on the drive.

  Device Manager indicates that drivers are up to date, and the device does not work, even though I have many distinguishing!

  Apparently, it is specific to Vista, but suggested courses of action left me with an even worse urge to kick the bloody things around the House that I had when I tried to play the CD in the first place, any help from you lovely people would be most appreciated. Thank you, James :)

  Hello

  If you have too many programs loading CD/DVD they can collide with each other as they
  competition for resources. These will be workload often pieces of themselves in memory at startup
  so it will have an effect, even if not to use. If you have installed some of these
  lately trying to uninstall it to see if it has an impact.

  --------------------------------------------------------------------------------------------------------

  This troubleshooting help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• QuickLook works do not for the pictures in Messages

  I am a very experienced user with multiple Macs and several iOS devices, all El Capitan running (or Yosemite) and iOS 9.3 and all messages (SMS/text/iCloud) synchronize correctly between all devices. But on my main Mac, a 2015 (MBP) (El Capitan) MacBook Pro, if someone texted me photo, when I select this picture, and then use the space bar to call QuickLook (to enlarge the photo), I get a window (white) large, empty, instead of the actual image:

  (Interestingly, the empty window door the correct name of the photo, but no image).

  So, on this machine, if I want to display an image that I received, I have to drag Messages on the desktop, and then I can use QuickLook. But QuickLook refuse to work within the Messages.app. (This is NOT the case on any of my other Macs. On these machines, when I hit the space bar, I get a larger version of the picture, as expected. "But it's the Mac I use more often!)

  I should also mention that this MBP is new, and its contents have been cloned, from a backup of my previous MBP a few weeks ago. And the previous MBP had the same problem, both in El Capitan and previously in Yosemite. This seems to suggest that there is a kind of corruption, somewhere.

  Any suggestions?

  I've considered trashing preferences, but Messages has several preferences files, and I don't know which ones to affect function. I'm fine with reset preferences of the application or on the way home my account information. But more importantly, if possible, I don't want to lose my message history.  :-)

  Preferably related files include:

  com.apple.imservice.iMessage.plist

  com Apple.IMessage.Bag.plist

  com Apple.iChat.plist

  com Apple.imagent.plist

  No one knows which of these may be better to try to remove, while retaining the history of my message? Alternatively, if I'm on the wrong track, I would appreciate any other suggestions.

  Thank you!

  Hello

  The captain also lacks the ability to open preview

  

  This photo is also an AIM chat who actually sent this photo 'online' if I zip (Compress) them.

  com Apple.iChat.plist is not holder iMessage 'story' that he she now holds the recent list of cat (which is useless because there is no option in the file Menu to access).  It also holds all preferences and Settings Menu d ' option.

  com Apple.imagent.com holds the account names of all accounts that you have and are involved in logging operations behind the scenes. There is a process called image that starts when the computer does and it will be based on the setting in the General Section identify enough to 'listen' servers. The parameter in the section general read "when I leave Messages, set the status offline" - it does not affect the iMessages account that will always show offline Messages.

  com.apple.imservice.iMessage.plist it is not longer used.  Yosemite El Capitan, it uses com.apple.ids.service.com.apple.madrid.plist instead.  It is also only on the info on behalf of iMessages and not on the 'history' or how pictures of cats are treated.

  
  

  com Apple.IMessage.Bag.plist it lists only the last used Apple iMessages server.

  
  

  However, there are these some .plist in ~/Library/Containers/com.apple.soagent/data/Library/Preferences which also play a role.

  

  Note the location of the path bar across the bottom.

  com.apple.messageshelper.FileTransferController.plist very probably watching the wick she holds a record of all the files and images sent to you, but in the hex names.

  View of Xcode.

  

  com Apple.quicklookconfig.plist doesn't seem to have relevant information.

  

  The next would be the Preview but .plist which is as empty as the at a glance.

  The real "live .plist lies in ~/Library/Containers/com.apple.Preview/Data/Library/Preferences , rather than having an Alias point in the folder ~/Library/Preferences.

  That said, and after reviewing through it I see no reference to what applications it is allowed to work with.

  This seems to be a question that involves 3 apps, look and preview Messages.

  All have read and write routes through ~/Library/Containers and the file final storage ~/Library/preferences.

  I am tempted to check the number of files that have lost your property and read and write permissions see this thread and useful item before the green marked resolved one.  Reset Home Folder permissions and ACLs error  (Linc offers first - marked text relatively useful, then a "Fix" that is the Green post resolved.

  

  20:40 on Friday. May 6, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)