Filter required to reinstall spare

Similar Questions

• Bluetooth connection for Nokia phone as a modem disappears after a few connections requiring a reinstall

  Hardware: Acer Aspire Timeline 1810, Nokia 6700

  OS: Windows 7 64-bit

  Pilot bluetooth Microsoft 6.1.7600.16385 (controlled for update, this is the last version June 21, 2006)

  ------------------------------------------------------------------------

  Problem:

  Laptop can see the phone via bluetooth and pair a connection. Subsequently I can Bluetooth icon > click > join a personal area network > click the phone icon > then connect to the internet via the phone.

  After several connections/disconnections, it is not possible to connect to the internet via the phone as Bluetooth icon > right-click > join a personal area network > no phone icon.

  However Bluetooth icon > right-click > show bluetooth devices > current phone icon.

  All I can do is to uninstall the phone as a bluetooth device, then reinstall. I have done that so many times, I'm now up to COM32 and COM34.

  Then, it seems an inherent instability in the bluetooth driver? I've encountered similar problems, even worse, with Nokia E66 and Blackberry 9700 (neither of which Windows could connect to establish an internet connection).

  ---------------------------------------------------------------------

  Technical information:

  Nokia 6700 classic properties > hardware > Standard modem over bluetooth link #2 > properties > (RFCOMM Protocol TDI) > status > device works correctly.

  Bluetooth icon > show bluetooth devices > nokia 6700 icon > click the icon > an error occurred during initialization of this operation. Try restarting your computer or device (don't restart two makes no difference) (by the way when the phone appears under personal space connection > This error message may appear, but it is still possible to connect)

  Phone and Modem window > modems > lists according to:

  Standard modem - COM32

  Standard modem over a bluetooth link - not attached

  Standard modem via a bluetooth #2 - COM15 link

  Standard modem via a bluetooth #5 link - absent

  Standard modem over link bluetooh #6 - COM34

  ------------------------------

  All the solutions to this problem?

  Thank you.

  Hello qwertyyuiop,

  1. have you set up the Bluetooth modem to connect via phone?

  2. have you got the correct settings from your mobile service provider to connect to the switched network?

  There are several settings that you need to set up using your Bluetooth modem. You can get these settings by calling your service provider. They will be able to help you configure the modem.

  Or the best way to connect a phone Nokia would be using Nokia PC suite. Personally, I connect my laptop with the phone. I had several problems when you try to connect by configuring modem Bluetooth as the connection used to move frequently.

  I suggest to install Nokia PC Suite on your computer which would have received you on a CD with our phone. This will give an option to connect to the network and automatically configures the modem. You can also download the software suite the link below:

  http://Europe.Nokia.com/support/download-software/PC-suites

  DISCLAIMER OF THIRD PARTY SOFTWARE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Reinstall Photoshop CS6

  I'm under the creative cloud of Photoshop and Lightroom versions. Programs work well, but I don't have a GPU in my computer so some features do not work. Sometimes I need to use the filter correction Adaptive wide-angle. In Photoshop CC 2015 this filter requires the GPU, Photoshop CS6 requires no GPU. So I decided to reinstall Photoshop CS6. The first update, I have been told everything went well. But then I have notified a second update and received this error message when I tried to install it:

  

  I followed the instructions and downloaded the update and tried to install it manually. But I received a notice that the update has failed and that the update applies. Photoshop CS6 seems to work very well. Filter Adaptive wide-angle works as expected. But the Manager of creative application cloud continues to tell me that there is an update, and it will not be installed. Any suggestions?

  Please see 'Installation failed' error U44M1P7 with Adobe Creative Cloud or updates of Adobe Creative Suite 6

  Concerning

  Hervé Khare

• Reinstall the os 10.7 or upgrade without installation

  I just bought a macbook online it of a late 2007 and was running lion but it requires a reinstall. I do not have the disks to doo it, but I have the origanal 10.5 installation disks.

  I can get as far as the app store connection prior to say its not available.  It's my only mac and I can't go on a desk. How should I do this?

  Your use of the machine must have been restored to its original state before you bought it.

  You can always buy Snow Leopard at the Apple Store and then buy Lion on the Apple Store with a redemption code.

• Questions about reinstalling Windows XP after the end of Support

  Several members of the family of my friends that I sometimes provide technical assistance for are still under XP SP3 on their systems.  These systems are too outdated and underpowered to upgrade to a newer version of Windows, and it will probably be some time until they are able to upgrade to a more recent hardware capable of running most modern versions of Windows.

  If in the meantime, something happens to one of their computers requiring a reinstall of Windows after support for XP purposes, but before they can get a newer computer, I have a few questions about what will happen:

  1. Is there still a way to activate their existing copies of XP during installation process?
  2. While I understand that new patches, updates, patches & will be is no longer provided, existing patches will be available through the Microsoft Update service so that I would be able to get those computers to update state that they would be about to XP supported ends, or do I have to search elsewhere to try & find these updates?  (It would be nice if Microsoft put up a cumulative update that would be sort of a mega-patch for people in this situation to be able to get back to the most current state systems, but I would not be surprised if there wasn't such a thing).

  Anyone know the answers to these questions?

  Thank you

  You should be able to clean install and activate Windows XP.  You should be able to upgrade as well, even if the wise move would be to get the updates stored on portable media or integrated into a multimedia installation (or both) as soon as POSSIBLE if the plan is to continue using Windows XP for a while.

  My suggestion is to set up and to buy Windows 7 Professional renovated systems / lease from places like TigerDirect.com - as pricing is generally about the same as just a license for Windows 7 or a little professional, the hardware specifications of these machines are likely machines Windows XP current in use, using something like the PC Mover take care of Laplink and Microsoft to move files (or for the more than 25 USD the) applications that can be moved as well) to the new system of the former is possible, and Windows 7 will get updated until 2020.

  Recently research I've seen systems to Windows 7 Professional for as little as 150 USD with 4 GB of memory and dual core processors.  Not bad.

• Failed to activate after reinstalling

  I've recently updated my processor and motherboard on my home PC, requiring a reinstall of Windows.  I am running Windows 7 Home Premium, and I bought a pack of 3 family and installed on 3 computers (one of them is the computer that I just upgraded).  When I am going through the online activation process, it tells me that my product key cannot be used on this computer.  I tried the telephone automated system, which accepted my key, but asked me how many computers I had already activated on, and when I said "three", he told me my license Windows had exceeded the number of licenses (or something to that effect).  There is no option to tell him that I have reinstall it on one of the three.  When I called customer service, they told me to try the phone activation once, I did and it failed with the same results (I told them he would, but they said it should work).  Does anyone have other ideas? I had to 'disable' Windows before the upgrade to free a license?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please note:

  The Windows 7 Home Premium Family Pack Upgrade 3 PCs is an upgrade license.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  Note also:

  Because you have changed the motherboard, the upgrade license has more a previous qualification license. Your license precedent provided with the motherboard that you have replaced is not transferable to the new motherboard.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  
  

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You can try the activation of the phone, but this is not guaranteed.

• Reinstall the USB drivers for laptop G62-367DX operating system windows 7?

  Hello!! I recently got a HP G62-367DX laptop about a month and half ago and a mouse without a wire about two weeks later. The mouse no longer works last week and tried to put his receiver in other ports usb with no luck there. I also tried to do a system restore and uninstall usb drivers and then by using the device driver to find the hardware changes defective. The only thing I got was an error indicating that the software device driver has not been installed successfully. Is it possible to manually install the drivers I need, or is it a problem of operating system that may require a reinstall of my OS? I would greatly appreciate any comments. Thank you.

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).

• Win 8 upgrade to Windows 7: users do not need to reinstall the drivers and application software not?

  Hello

  I'm fascinating to read entire article on upgrading to win 8 to http://windowsteamblog.com/windows/b/bloggingwindows/archive/2012/07/02/upgrade-to-windows-8-pro-for-39-99.aspx

  A part of the article reads; "You will be able to upgrade a version of Windows 7 to Windows 8 Pro single-station and along which includes your personal files, settings and Windows applications"

  My Win 7 Pc has MS Office 2010, Antivirus, MacAfee, PC Dell drivers and other applications. This means that I am not required to reinstall all that software? that is, it will be automatically postponed to Win 8 OS.

  If this is the case, it will save a lot of time, effort and downloading of costs during the update of data.

  Thank you

  Low

  Yes, you can upgrade from Windows 7 to Windows 8. See the following topics:

  Install, upgrade, and activate

  • The upgrade from Windows 7 to Windows 8

• Menu of Photoshop CC filter does not display plugins

  I have Photoshop CC 2015 on a Mac. I have the set of filter Topaz and Nik plugins. Yesterday, they revealed all in the menu filter. Today, with no new update anything, none of these filters appear in the menu filter. I suspect inadvertently, I did something to hide or disable plugins, but I can't understand how to get back them. I tried to reinstall all these plugins, they are in the Plugins directory in the application directory Photoshop, right where they should be, simply, they do not appear in the menu filter. I reinstalled and rebooted and done everything I can think of without success.

  I found the solution. In PS, general preferences, I had to hit the preferences to reset the button exit. I have quit smoking, revived, and all my filters were back. I still have no idea of what I did to lose the plugins, and of course I lose all my preferences, but at least I can get back to work.

• [OBIEE 11 g] Apply the scheme star without security filter?

  I imported my first OLAP cube, by following the instructions here < /a > < a href = "http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r1/olap/biee/createbieemetadata.htm" > and apply the security filter required to force the star join between views of dimension and cube. However, the security filter does not apply to users in the user administrator of BI Group. Is it possible to do this without a security filter, or somehow apply the filter of security even when the user is an administrator?
  
  Published by: Fabrice on 22 January 2013 07:56
  
  Published by: Fabrice on 22 January 2013 07:57

  You seem to have found a good document to start from.

  The use of OLAP with OBIEE is a two-step process.

  (1) you set (and building) the cubes of AWM.

  (2) tell you these cubes OBIEE.

  Before OBIEE 11.1.1.5, the only way to make (2) was to use the AWM plugin and card views OBIEE cube generated. But from 11.1.1.5 you can "import" instead, the cubes using a dialog box in OBIEE administration tool. OBIEE will generate different SQL depending on the approach you take.

• Question filter blur

  Hello

  I'm in the planning phase of a project and I was wondering if it is possible to video dynamic blur using the blur filter? Specifically, I want to:

  (1) transmission of a flv file and apply the blur on the left and right edges of the video, so that they become clear on mouseover.

  (2) blur the entire video and have only the region closest to the mouse pointer clear, which will follow the movements of the mouse.

  (3) pen the blur, blur to clear

  What type of additional system resources of the blur filter requires? Much it will increase the size of the swf file?

  Thanks for your help!

  Dave

  I don't know of any way to use the blur filter to create a gradual blurring.

  You can create a gradual blurring effect / feathers using the class bitmapdata but it would be a task for someone comfortable with coding actionscript bitmapdata class.

• Windows 7 Upgrade Guide for dv6000/dv9000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models are not officially supported

  with Windows 7.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5 users with nVidia graphics card should check the temperature of this device before upgrading.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  How do you know what model you have and the specifications for it:

  1. click on the Support & drivers link. (The upper part of this page).

  2. in the search box, type your computer laptop product (p/n) number.

  Resources:

  How to locate the laptop n/p

  3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).

  4. on the same page, click on Product Information -> specifications and you will find all the information on

  your little laptop.

  How to install Windows 7 and what you need to know during the upgrade:

  1 guide: How to do a clean Windows 7 install

  2. all drivers for Windows 7, you will find in the next post below.

  3. some drivers have comment while they are initially made for Vista system.

  During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,

  Windows Vista Service Pack 1 and Windows Vista Service Pack 2).

  Resources:

  Make older programs in this version of Windows

  How to run a program in Compatibility Mode in Windows 7

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):

  nVidia Chipset (Install and reboot before other drivers) here   (Vista) 

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then until you install the other version will be

  you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller

  ( process):

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  Realtek HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).

  "" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  
  
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS

  worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Windows 7 Upgrade Guide for dv2000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models do not have their support

  with Windows 7 system.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers for Vista and preinstalled by HP software for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5. users with AMD processors have indicated that their models dv2000 were very quickly overheated after installation

  Windows 7. So if you want to install this system and you have this processor to remember about this and be hypersensitive

  on this issue.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  CherylG (one of the best HP forum contributors who has model dv2000) has solved this problem by installing Windows

  Updates.

  Resources:

  How to install Windows updates

  6 If your model has nVidia graphics card then please check how high temperature this device possesses under

  Vista. In this way you will know is it works fine under Windows 7 also.

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then before you install either version, you will need

  first of all to remove old drivers from your system. Check below how guide do (that's not standard

  ( uninstall process) :

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 7150 M, 7200 M:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  Marvell Yukon 88E8039 Lan here (ver 10.70.5.3 for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use a finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  Alps TouchPad

  Install driver through Windows Update:

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for Alps TouchPad.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software here (ver 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Graphic editing section of 31/03/2010 update nVidia with uninstall guide, updated drivers for nVidia GeForce 8400 M GS to worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Published 24/06/2010 updated published 14/12/2011 updated Intel® Rapid Storage Technology driver

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Drivers added edited 04/01/2011 for nVidia GeForce 8400 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Satellite C850-A958 - BT Stack installation stucks & utilities BT are not available

  Model: * Toshiba Satellite C850-A958 *.
  Purchase date: January 13, 2013
  Warranty status: still under warranty until January 13, 2014

  * Issue 1: * "Bluetooth Stack" utility is blocking and not to complete the installation procedure.

  * Problem 2: * there is no utility 'Bluetooth' work due to the installation of stuck.
  Operating system: Windows 7 64-bit

  Address the situation/address Description
  My laptop SSD (Solid State Disk) had a manufacturing defect represents in the form of bad sectors & because of the guarantee, he was in a process of change for the defective part by the center of service allowed in my country.

  When she came back to me, I started to install the operating system and drivers (my computer portable edition does not include operating system drivers).

  I faced a serious problem and it was not existing before, when installing "Toshiba Bluetooth Stack for Windows" the installation process is not completed successfully and it's freezes to an important point.

  This process blocked the program of "Bluetooth Stack" menu is already created and if I try to run any utility of it I get an error message saying: + "the program can't start because TosBtAPI.dll is missing on your computer. Try reinstalling the program to fix this problem. » +

  Installation stucked treat freezes - for more than two hours in fact - and the only solution cancels the right low "Setup Bluetooth Drive_r" installation process by pressing "Cancel".

  After windows restarts, I found the menu of the program seems like a properly installed (complete the menu & highlight of the elements on the inside), but if I run one of the utilities include a message required to reinstall the Bluetooth driver and when to start it stops at the same point of freezing again as endless and repeated behavior.

  I tried to install a new copy of Windows several times - also re - download the source file for the Web from Toshiba site several times with the same result every time.

  Currently, I can't use any uility driver bluetooth more!

  I want to know:

  What is the solution to this situation?
  Is it possible that the bluetooth hardware is damaged during the process of evolution of the SDA in the service center?

  Thank you

  Hello

  I think I know what you did wrong the laptop supports the Realtek Wlan / BT combo card.

  This means that a single module shares the feature WLan and BT.
  To ensure that the two would work correctly, a [Bluetooth Filter Driver Package | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7499 selSh 3439 = ortMod & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 81895 & OSI D = 30 & driverLanguage = 42] must be installed.
  After that, you could install the battery Toshiba BT.

  Next to the installation of this software, you must also install VAP (value added package) which is an essential part in the Windows 7 environment.

  Once again:
  First install: VAP
  Then Realtek Wlan driver, after this suite Bluetooth Filter Driver Package by Toshiba BT stack

• Windows update website does not work

  Hello...

  I recently had a problem requiring a reinstall instead of XP Pro 32-bit to backrev to SP2. Basically I have been running SP3, but was constantly reminders, insistence, etc to update to IE8, and after continuous pressure, I finally said 'ok' and went ahead with it. And he threw quickly across into itself.

  Accordingly, I did an uninstall of IE8, but concluded that IE7 could no longer work. After checking for a solution and try the patches recommended, nothing has worked, and since I'm at SP3, IE7 could not be uninstalled (this is possible for SP2). There is no information available for SP3 uninstall, so I had finally "repair" XP by doing a reinstall instead of booting from the XP SP2 cd. It worked pretty well, and everything was back to normal, even if I was now running IE6.

  So, I had the ACR IE7 on your site and tried to install it. There is no problem during installation - no message of error - but after the reboot. I was unable to open IE7 anyway. ERGO, I had no choice but to uninstall it. Thank gawd I rarely use IE; nothing else was touched and Firefox & Acoo both work very well.

  To try to resolve the problem of IE7, some "corrections" for "IE7 will not run" involve open IE7 and perform certain tasks. Seems to be quite a task: IE7 will not run, so go ahead and open and... Riiight. Anyway, I don't have the tools of correction for reset and disable add-ons, but unfortunately, they specify that I must first install SP3. No way will reinstall SP3 until I see IE7 work @ SP2; Simply much too, it would mean an extra effort to do a re-install of SP2.

  I'm ready to install other patches, although I noticed that nothing has been downloaded after I backrevved to SP2. As a result, I went to windowsupdate.microsoft.com do updates manually. He installed the required ActiveX control, analysis, and then returns the following message is displayed:

  "The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues) "

  So I am now running SP2 and everything seems fine, except that I can't apply updates, nor can I run IE7.

  Virus Info: this machine is running Microsoft Security Essentials and AVG Antivirus, and both are up to date and returned "no items found" after a FULL analysis. I also did a manual FULL scan using Malwarebytes Anti-Malware (also updated to current rev & GIS files) and it is an executable placed under my login in Documents & Settings of DiVX, that triggers an application running ads when I open the DiVX player. He was NOT in the Windows directory. AVG and MSE up-to-date and run full scans every night, so if you believe it is a virus, I would need proof. You would also be admitting that MSE is wrong; I've been running for more than a year.

  Caution: again, I won't install SP3 & IE8 until I see that IE7 will run correctly @ SP2, which - at least in part, it will apply updates that I can't apply. Please spare me the answer "well, updated to SP3 and IE8 first, and we'll see if that fixes it. If you're wrong, I'll be right where I started and will have to go through the process again to get where I am now, lose a lot of time in the process. I don't know if it is a community site, but please, only a response from someone who can provide real help for the problem of why the update site simply says there is a problem, but does not provide any additional information about the error.

  Yes, I know that XP will support discontinued from April 2013. It is now Sept 2012.

  Thanks in advance for any help legitimate that you can offer.

  Support for XP SP2 took end July 2010 - http://support.microsoft.com/gp/lifean31

  The Windows update website no longer unless you are at SP3. I did a new install of SP2 and verfied. The mistake that almost everyone gets in these conditions is 0x8024400A. I think that if you look at the WU error page again you will see this code.

  You say that you will not install SP3 so we cannot help. You are committed to a comprehensive system of faults for the life of the PC. If you change your opinion then we do know and I/we will try to help.

  BTW XP died in April 2014 not 2013 - http://www.microsoft.com/en-us/windows/endofsupport.aspx

  Tricky