HP Deskjet 842C printer will print on limited user on local Windows XP Professional SP3

Similar Questions

• All of a sudden my deskjet 5690 prints very slowly on my laptop Windows 7 2009

  Even the print project it takes 5 minutes to print a single page.  I have downloaded the software of the printer doctor, says that everything is installed properly.  Any ideas?

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• 3505 Deskjet series printer 3610. The system is Windows XP with all SPs

  By selecting "Print Page of Test" on the tab "General" of the field "Customize your printer" print the colours of the logo Microsoft OK; but all black text causes missing lines or sloppy.  Same result with a MAC running snow leopard OS.  All levels of print colors are quite adequate.  Any suggestions?

  Jason, thank you for your help and your time.  The problem is resolved.  The prompt for more information brought me back on the many steps and methods.  Main problem proved to be a misalignment of the cartridges.  Corrected by a number of iterations of the alignment process.  Return the printer to its owner in several weeks and hope it works satisfactorily with her pimp.  He is 89 and blind if, of course, he relies on his wife who is not too computer savvy.

• Stuck transport - DeskJet 842C

  The cartridges are stuck on the right side of the cart and will not spend. When I turn on the printer it makes a grinding noise and I can see the cartridges trying to get around, but they do not. I have cleaned the printer and made sure there is no paper jam anywhere, but it still does not work.

  Hello sds.

  I suggest you try this:

  Turn off the printer, open the lid and turn on the printer. As the transport attempts to move (producing grinding) unplug the power cord from the printer. Now try to move the carriage by hand and if you can, move all the way to the left, and then again in the middle of the printer. Turn on the printer again and hopefull this will solve the problem.

  The Deskjet 842c printer is old enough and I don't have one on site to check myself, but the first or the second of these two documents describe another step to try to correct the stall of transport (look inside the printer, on the far left and compare your printer for images in documents):

  1. http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=71476&prodTypeId=18972&objectID=c00255558

  2. http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bud09144&printver=true

• Windows 7 and HP printer Deskjet 842C

  I am currently using Windows XP.  When I switch to Windows 7, my printer will work (Deskjet 842C)?

  Windows 7 comes with the base of Deskjet 842 C driver. Thus, the printer work on Windows 7. For more details, see the following document:

  http://support.HP.com/us-en/document/c01874792

• DeskJet 3050 printer ink jet: Will Install Disk work for a printer of opportunity?

  I broke my Deskjet 3050 printer and cannot solve this problem, so I buy a used one off of eBay that does not come with the disk installation or other accessories.  My installation disc will work with any HP Deskjet 3050, or is it limited only to one I bought?  There are several 3050 printers for sale, but they do not come with the original disc, this is why I ask.  Thanks to all those who can help you.

  Yes, and you can download your software and drivers on HP website.

• PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

  This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

  Welcome to the HP community @273frustrated,.

  I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

  I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  • Printer prints a blank Page or doesn't print black or color ink for the series of e-all-in-one-HP Deskjet Ink Advantage and Deskjet 3520 printer

• I have a HP Deskjet D4160 printer. The reset button will Flash. Diagnosis HP said there was a "breakdown of pen", but he didn't give any directions on how to fix it.

  Original title: breakdown of pen deskjest d4160

  I have a HP Deskjet D4160 printer. The reset button will Flash.  When I ran the HP diagnostic he said there was a 'pen failure' that had to be fixed, but he didn't give any directions on how to fix it.

  Hi Fred Cornell,.

  ·         You have any problems with the performance of the printer?

  ·         What operating system is installed on your computer?

  ·         The printer works well before?

  You can check the link mentioned on official website of HP that describes the problem for the specific printer model you are using.

  Flashing lights in the HP Deskjet D4160 printer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00635074&cc=us&DLC=en&LC=en&product=501857#n129

  Alternatively, you can contact HP support for help on the issue.

  HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Let us know the results.

• Deskjet HP930C printer will not print

  I have a Deskjet HP930C printer.  I ran the corner store without success.  Don't just print.  Evil light is lit indicating there is a problem with the color cartridge, but I just replaced today and still does not print and the orange light still flashes.

  Hello

  I suggest you to update the latest drivers for the printer and check if it helps:
  http://support.Microsoft.com/kb/283658

  It will be useful.

• HP Deskjet F2210 printer will not print my documents with the exception of my e-mail highlighted

  HP Deskjet F2210 printer will not print my documents with the exception of my e-mail address highlighted who is on the document, it is not cartrages, as it will print one page black and multicolor of the internet. Help, please.

  If you found problems with print quality with the only printer without printing from the computer, then it is a hardware problem.

  You may need to contact HP (1800-474-6836) support. Looks like a print head may be bad or needs to be cleaned manually. I don't think that this printer has a detachable printhead to clean manually.

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• Re: HP Deskjet 710c printer driver will work for 712c printer under Windows 7?

  It's very interesting, but my Windows 7 64-bit system does not list any driver printer tor the 710C.  Printer drivers are for the 450, 460, then 5100.  If the 710c driver is not available, including available pilots would argue the DeskJet 712C printer?

  shanafeg wrote:

  It's very interesting, but my Windows 7 64-bit system does not list any driver printer tor the 710C.  Printer drivers are for the 450, 460, then 5100.  If the 710c driver is not available, including available pilots would argue the DeskJet 712C printer?

  The drivers are sent through Windows Update.  Try the following: click Start, devices and printers, add a printer.  When the list of printers, click Windows Update.  Wait a few minutes to fill out the list, and then select HP for the manufacturer and HP Deskjet 710C.  For the x 64 version of Windows 7, you must apply the patch after you install the driver.  [Edit - patch is available here.]

  

• HP Deskjet 710c printer driver will work for 712c printer under Windows 7?

  Windows 7 list a driver for HP 710c printer. This driver works for 712c printer? Thank you

  replys.

  Gary

  garyfargo wrote:

  Windows 7 list a driver for HP 710c printer. This driver works for 712c printer?

  Yes, the Deskjet 710C printer driver should be a good game.

• Cannot print using Windows 7 using HP Deskjet 842C series

  I cannot print from windows 7 using HP Deskjet 842 C series.  Windows and HP said is compatible, it can only print from other applications and not Windows 7.  Any suggestions?

  I cannot print from windows 7 using HP Deskjet 842 C series.  Windows and HP said is compatible, it can only print from other applications and not Windows 7.  Any suggestions?

  In fact - what HP means without out and say what they deem a legacy device (printer) and even if they included a universal driver (Microsoft put in Windows 7) and it should work without doing you anything else - it is perhaps not fully functional as it was in previous operating systems where they (HP) it supported.

  HP in this case is the manufacturer of the equipment and in all related case material - the hardware manufacturer is responsible for the materiel support (drivers, software, etc.)

  You can follow the advice of HP, if you want to:

  Install the driver with Windows Update with a USB connection (downloadable Driver is not available)

  But really what they're trying to say is, "your printer is old - buy a new one from us so that we can stay in business."

• My Deskjet F380 printer will not scan after upgrade from XP to Windows 7 32 bit

  I have a HP printer Deskjet F380 (S) NC 73 NGZ14S which worked perfectly on Windows XP. Island re install software without disk original and well as the printer and copier are working the scanner is not. I have downloaded and run the Wizaedand that had this message "Full HP software is already installed, but the basic functionality pilots seem to be missing or configured incorrectly. Assistant and then went to "drivers for your printer are disabled click next to allow them to" clicked Next, and he returned to the previous message again. I have not installed the software on. Windows 7 but I don't know that my original HP software disk has not been used. Now must I UN install Windows 7 and re install from the HP website. I got another message in short while the HP site it says driver required WIA trawling. I'm not very experienced on the computer and would like your help thanks Mimosa

  Yes, I would uninstall the driver and software and then download the driver for Windows 7 and install it.

  Here are some instructions for uninstalling: uninstalling the printer software.

  You can download the driver here: Driver and software downloads.