Filter the items in dimension

Similar Questions

• Filter the items in the menu grey

  Why are my filters grey and non-functional, for example the deformation?

  Hello

  There could be several reasons, but the most common is in a picture or color mode that does not support these filters.

  Under Image > Mode see if the selection of RGB color and 8-bit/channel makes a difference.

• PB with the photoshop Liquify Filter: the cursor remains in cross and is likely not desired items... except the entire image

  PB with the photoshop Liquify Filter: the cursor remains in cross and is likely not desired items... except the whole picture...

  For example if I want to shrink an element (like an eye) the cursor (which takes the form of a cross) shrinks the whole picture... and not the eye! Do you have any ideas?

  Change the size of your brush to 100 (it is 8550 !)

  

  It should work fine

  

  ~Assani

• Does anyone know how to filter all the items in an XMLListCollection?

  I have a tree with the following structure.
  <>node
  < Node1 >
  < node2 >
  < node3 / >
  < node4 / >
  < Noeud5 / >
  < / node2 >
  < / node1 >
  < / node >
  
  I need to be able to filter on node 3, 4 and 5 and then after the filter if they do not exist, get rid of the node 2 level and make then another function to check if the node levels 2 is here and if not filter... then filter node levels 1. Basically it is an ascendant of the filter. Flas 2.0 I would filter base level by removing the knots... then move to the next level and to check if they had children or not... If they did not then I would remove the... and then I would repeat the step for the last level.
  Does anyone know how to do this without having to remove the items from the collection... Basically, perform a filter rather than a deletion. I know that the filter function only returns the first element in the xml structure... which is annoying. If anyone can help me I would appreciate it of course?
  
  Thank you

  I guess that the filtering on a tree passes only in the lymph nodes of the root... It's very lame on part of Flex. Basically, I had to make my own functions to remove the nodes dynamically.
  Remember that this only works on a dynamic array element.
  Delete list ;

  To make this work, I have a main TreeCollection... and that I made a copy. Treecollection.Copy () and deletions of the struct stuff copied. After that the destructions were I made then assigned the copy to the MyTree.dataprovider = copy.

• How to change the sort order of the items sought for the last element of this research first. I DON'T want to say the order search engines, but the existing research by arrow down

  I want to be able to change the sort order of the items, I already looked in the search box. I want to be able to hit the arrow key down and see my previous searches in order of last search showing the first. For the moment, I don't know how it is sorting and it is very annoying to have to re - enter a query that I typed 5 minutes earlier, but because I typed in another 10 since it's lost somewhere in the list. Is it possible, I Googled, but did not find the topic anywhere. Just to clarify, I DON'T mean of the order of the search engines (which is what appears in google), I mean that the text typed into which has been registered in the drop-down list.

  Thank you

  'Form filling' uses a "frecency" algorithm, frequency + recency, similar to the list of AutoComplete address bar.

  I found an extension that seems relevant, but critics are old, so I'm not sure it's still working: Searchbar Autocomplete Order.

  But... is the AutoComplete does not? I expect that typing a few characters of the previous query would be to filter the list so that you can easily select? Or is the problem that the list does not remember quite who looking for?

• How to filter the elements of web application with element Boolean field is checked (true) in module_webapps

  Maybe I forget something in the docs of BC but I can't find an answer to my question.

  How can I filter the web app items when a web-app-point-Boolean field (= true) in the backend?

  The web application itself is a list-web-app. What I want to achieve is, that when the web-app-point-field is selected, the web - app element (and its web-app-point-fields) will be displayed on the web page.

  The web page contains code that refers to the web-app-point-fields

  Hope you can help me with this.

  Thank you

  Sincerely, Carla

  Are you referring to the return of the page, using liquid, if the box is checked?

  For the rendered Liquid, you can do this:

  {% If this.} {["My Boolean field'] == '1'-%}

  The Boolean field is checked, show some fields or information are here.

  {%-%}

  The Boolean field is not checked so that you can show what you want here.

  {endif %}

  If you don't want to show anything if it is not checked, then proceed as follows:

  {% If this.} {["My Boolean field'] == '1'-%}

  Go only if it is enabled.

  {endif %}

• The checkbox 'filter the content bin' is no longer an option? If this is the case, where can I find it?

  The checkbox 'filter the content bin' is no longer an option? If this is the case, where can I find it?

  The mention 'Content filter Bin' simply refers in the name of the search in question box. You might also occasionally see it called in the "quick search". The search box works the same, albeit much more quickly than in previous versions and it is essentially a search "on-line". In other words, when you type in the box, any project item that matches the text you enter will be filtered in the view and those who do not will be hidden.

  Unlike the previous version of Premiere Pro that you reference in the book, it's that Pr is used to provide a history of searches through the menu drop down. This has been removed because it was part of the slow pace of research and in its place is the search bins feature (it's the button with the folder with the magnifying glass top just to the right of the search box). In the box type a search query, and then create a new bin of research using this button to create a bin in your project that you can view to always see the correspondence of the elements without having to perform the search again. Read more about it here: find assets

• Hide the items in the menu table of contents

  Hello!

  I'm doing an iPad magazine and I have a question about the menu table of contents.

  One of the FAKE paintings, go to an index page for one of the parties in the magazine.

  So, I wouldn't have the other articles in this section to display in the menu table of contents.

  How can I do? The only way I know to leave items on the menu of the table of contents should mark them as ads.

  Which is the way to do it or there at - it another way to solve my problem?

  Another question about metadata, you must enter. That means "Tags"? What to write here?

  Thanks in advance!

  / Karin

  70 x 70 pixels

  Herzliche Grüße | Kind regards

  Ulrich haha

  PS: E-Learning mit ulrich-media:

  http://www.e-College.ch

  --

  u r i c h - m e d l I have a G m b H

  http://www.Ulrich-media.ch

  10/6/2011 karin_strom [email protected]>

  >

  Another wuestion in the pictures of the table of contents:

  What is the best size/dimension to make them in?

  Right now they look a little pixelated.

  >

  / Karin

  >

• Filter the current month!

  Hello Experts!
  
  I have two tables of facts (sales, reservations) and three dimensions (time, geography, product) in my diagram. I want to see the % change in the booking in the current month compared to last month. I have a column in the reservation called "% change", which calculates the percent of change in booking from last month. How can I filter the data for the month in progress at my table - time, a month in the form of text for example values. January 2010?
  
  I read some articles and OTN but have not found something useful in my case.
  
  Thank you!

  Hi Dan21,

  Set a dynamic variable repository in your RPD.

  Use the following SQL as source

  SELECT MONTH_YEAR INITCAP (TO_CHAR (SYSDATE, ' MONTH YYYY '))
  OF THE DOUBLE

  Having the variable repository update every day, in this way, it will automatically update the next month.

  Filter your report based on the variable repository, that you have created.

  Good luck and if you found this post useful, please reward points!

  Best regards

  -Joe

• How to filter the view LOV object?

  Hello
  
  Can someone help me please how to filter the LOV VO according to the selected result of LOV another?
  
  Thank you.
  
  Jon

  In the second LOV have additional lov map.

  In the property inspector
  Set the property ITEM of criteria with the first value LOV
  LOV region article - select the attribute of second LOV that specify the link between your two LOV.
  Required - True property

  You have defined the question of the criteria for the second LOV with the value of the first LOV, second lov runtime will filter the values based on the values first of lov.

  Hope this will help you. For more information you can always see the development guide.

  Arvind

• With the help of buttons to filter the interactive report

  I have an interactive relationship with a default filter set up. Now, I would like to have buttons to modify the SELECT statement used for the report. While I need not make a new page of interactive report for each button. I want to provide the user with a buttons show all reports, view reports on demand and completed report. Everyone will just filter the lines accordingly. What is the best way to achieve this?
  
  Thank you!

  Hello
  You can created a where clause clause in your IR as:
  Select...
  Of...
  where report_type like 'at the request of the reports' and: p1_button_value = 1
  or report_type like 'Finished reports' and: p1_button_value = 2
  or: p1_button_value = 3

  Now, you create your button and an element called: p1_button_value. Function of the key, you click on the value of your Exchange item. If you need display different columns, then go to the column and change the condition:
  : p1_button_value = 1

  It will be useful,

  Tobias
  ----------------
  http://Apex-at-work.blogspot.com/

• Why I get this trying to empty the Trash: the operation cannot be completed because the item "IMG_0645.jpg" is in use

  After selecting and dragging some photos of Photo on the desk I have their attached to an e-mail and sent them to the coast. Then I selected the 5 photos on the desktop and put them in the trash. When I tried to empty the trash later I received the following message: the operation cannot be completed because the item "IMG_0645.jpg" is in use.

  Aren't these photos on the desktop 'copies' of the originals in the Photo?

  All wise users out there with an answer?

  stop, disconnect all external devices

  Restart your computer in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  empty the trash after checking the files in there are of no use to you

  arrested again

  Reconnect the external devices

  reset.

• How to stop Motion 5 to rename the items?

  How to stop Motion 5 to rename the items?

  For example, I have a folder named "Box" inside this folder are 5 additional folders and in these files are text and circles/squares etc.  Once I have copy and insert the name of the parent is "copy of zone 1", the names of children is now "copy print"1", 1 paper copy etc, and children are also name with a copy to the front and a number in the back.  If you like 50 items in the folder, you need to go to each name and remove the copy, then move to the back of the name and remove the number.  That would make 100 corrections.  If you duplicated "Box" 10 times that would be 500 times I have to delete the copies and 500 times I have to delete the number.  I am an organized person and I do not confuse names like "copy paper 27.

  I only want that this

  'Copy of movement case 12-11'

  to look like this

  "Movement block 12.

  It takes a lot of time to remove the copy at the front and out the number on the back of name.

  In Autodesk Maya 3D they do something similar, it turns 'apples' in 'pasted apples 1 ", so created a script that deletes all the text"stuck"in the name and number on the back the text name.

  I think it's a pretty silly renaming procedure.  Adds text to the front and rear.  Makes me wonder where they got their education.

  David

  David, for starters I can't duplicate what you describe, where things are added to the front and back automatically, you may need to clarify some things.  Looks like what you're saying is you have Group in movement named "Box" If you copy and paste the group, the name of the new group is "copy of copy of box?  Or you add 'Copy from' before the name of the Group at some point before making a copy/duplicate of the Group?

  Movement, like the Finder and many other applications, will add an object in double with 'copy', then add numbers after that. The structure of renaming seems simple enough. For example:

  1. start by a group of layers / named 'box '.

  2. copy and paste "Box" will give you "Box copy.

  3 copy and paste 'Copy of box' will give you «box copy 1"»

  My tests, if "copy" part of the name at the end, only the numbers will be added and increase gradually.  I think that if you get something like "Box copy copy" you have added manually "copy" at the beginning of the name, which is the only way that I could reproduce what you describe. If you don't want to have to remove 'copy' twice, don't start a layer name or "Exemplary" program group. Motion is probably not check if the copy is at the beginning, at the end.

  For what is a way of not having a copy or a number added to the end, it is not a.  It is probably a requirement of how the movement initially creates duplicates of layers/groups and make sure, that it is not destroy the existing layers. This is probably the best. This is similar to the creation of the records or documents in the Finder, just moving, you can go back and rename multiple items with the same name once they are created. If you are uncomfortable with writing scripts, sounds like you are, maybe it's a good option, otherwise you will have to do some manual changes as you go.

• How to filter the modules of the version of TB?

  My version of TB: 31.1.2 on Win7

  The Add-ons Manager has a section called "Featured addons". I think that, Hey they must be cool if they are featured! I try "Contacts Sidebar" only to discover that it was updated in 2007 and does not support recent versions. How to filter the Add-ons to display only those compatible with my version of TB?

  All the people who still use older computers from apple. This is the last version that will run on them.

• cannot be synced because there is not enough free space to hold all of the items in the iTunes library

  cannot be synced because there is not enough free space to hold all the items in iTunes (required additional 194.8 MB) library.

  It is not supposed to because I have enough memory on my iPad.

  Help, please

  ckucharek wrote:

  It is not supposed to because I have enough memory on my iPad.

  Not based on what? You have not provided any information as to the amount of space you have left and what is the total capacity of your iPad. He must leave a certain percentage of the free capacity at all times, so if you have a 32GB device and you are up to 2 GB of free storage, which could in fact be severed close... If it says you need to 194.8 MG of free space that would be in addition to the amount that you see as free space.

  It also depends on what you're trying to sync on iTunes as well. What content, apps, songs, etc.

  So... can provide you more details?