Filter the limitation on VPN3000 (is it a bug or a specification?)

Similar Questions

• How to overcome the limits of mail?

  I want to send a mass email to more than 100 people. How can I exceed the limits of sending mail?

  You can use a Gmail account with the e-mail. Their limit is 500 recipients for a single e-mail.

• How to filter the modules of the version of TB?

  My version of TB: 31.1.2 on Win7

  The Add-ons Manager has a section called "Featured addons". I think that, Hey they must be cool if they are featured! I try "Contacts Sidebar" only to discover that it was updated in 2007 and does not support recent versions. How to filter the Add-ons to display only those compatible with my version of TB?

  All the people who still use older computers from apple. This is the last version that will run on them.

• Mobile Firefox is unable to filter the results of google by date

  I have mobile Firefox installed on my Nexus 4 side by side with Google Chrome browser. When I do a search on google in mobile Firefox I can't filter results by date, but I can't in Google Chrome browser.

  What Miss me?

  The function to filter the results of google by date is missing from the mobile firefox browser?

  Thank you

  It seems to be part of Google's strategy to dominate the world to retain some features of other browsers. I don't know if there is a solution to force search tools to display in mobile Firefox, but you can try the strategy adopted by another user faced with a deficit of function and use the fake extension to lie to the sites on which browser you use.

  See: Google local search does the same in Firefox as in Chrome. How to repair?

• NB305 - impossible to obtain the limited warranty

  I brought a NB305-106 a few weeks ago and I have a problem, try to get the limited warranty, TEMPRO, it just says that my number series/number are not valid, and on the web when you try to register, it says that the serial number has already been saved... so I can't even ask no other warranty. Someone at - it suggestions?

  Can you please send the link where you try to do this?

  To check registration status please visit http://www.toshiba-tro.de/unitdetails

  For problems, please contact Toshiba in your country. Details are at http://eu.computers.toshiba-europe.com/innovation/contact_toshiba.jsp

• Satellite M40-307: accessibility utility does not work with the limited user account

  Hello everyone,

  I have a Satellite M40-307 (PSM44E), and I had a problem with the utility "accessibility", which displays an icon in the notification bar of Windows XP, to inform the user if the "Fn" key is active or not.

  This utility would not work for the administrator would not worry so much, because the administrator is supposed to know what he does. But the limited user doesn't have access, that bother anymore.

  In Administrator, this utility works quite well. But during a session of limited user, if I try to launch it in [runas / user: admin "C:\Program Files\TOSHIBA\Windows Utilities\TACSPROP.exe"],
  I am replied that the file TCMSVR. DLL is not found. If I launch normally, a message tells me that this utility requires that I am logged on as administrator.

  So, what can I do to use this utility normally, i.e. in a limited user Sessiona? *

  Hello

  Well, you should try to activate the rights for the TACSPROP.exe.
  To do this, you must enter the operating system as an administrator.
  Choose the application, right click. There is a Security tab. Here, you need to activate the permissions for all users.

• record numbers in iCloud drive on my Mac, filter the other apps

  I like to use the Finder as a starting point to find and open documents.

  I added a sidebar favorite "iCloud drive.

  It shows the files I put in place and some docs that I moved to this location

  BUT

  He shows no subfolders for 'Numbers', 'Pages', "TextEdit", records that have been created automatically and used as storage location by default when you use the corresponding software / application.

  ARG! These records show on the web, iCloud.com and within the limits in the apps on the window to open.

  How / can I see them on my Finder pane permanently?

  Go to the Apple menu > System Preferences > iCloud > iCloud Drive, click Options, and check in front of page numbers, etc. These files should then manifest in iCloud drive in the Finder.

• Satellite P10: Question about the limits of upgrade of RAM and HARD drive

  What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better would be one of the ones 24 hours server as Hitachi HTE721010G9AT00, I have just turned off my computer. Which one to take and are there limits (BIOS) (keeping in mind that there will be 200 and even the 250 GB drives next year)?

  RAM: should I put two 200pin SO-DIMM 333 or 533 or should not change at all as it works very well and stabil now?

  Hello

  In my eyes you should follow the guidance of Toshiba line and must use the memory modules that are recommended in the user guide. But if you can also try to test with 400 Mhz or 533 Mhz. I think that each dealer notebook or memory could do that.

  I think the BIOS might be able to handle the hard drive with capacity of 30 GB / 40 GB / 60 GB / 80 GB, Bus Master IDE with ultra DMA 100 synchronous
  In my opinion the BIOS does not recognize the larger HARD drive.

• How to filter the traces of tension TDMS after acquisition?

  Simple question. We have acquired a lot of electrophysiological data with express signal. We now need to filter data after the acquisition for later analysis. I can import the files TDMS tension of previous experiences, but can't seem to run the filters we used on the side of the acquisition to filter the existing traces. Is there a simple way to do this?

  -smb

  Hello Chinchilla,

  I enclose a few screenshots on how to add a step to an analog input filtering. You can select the type of filter and order too.

  

  In this screenshot you can check how to change the configuration of the filter

  

  Finally, you can access the TDMS of LabVIEW file with one of the examples of PDM. Please follow these instructions:

  1. open LabVIEW

  2 - go to help > find examples to open the Finder 'example '.

  3 - Go to Fundamentals > file Input and Output > TDMS > Standard Read and Write and select the VI named TDMS read Events.vi

  

  You will need to know the data present in the file to read correctly. For this, you can use the leading PDM Viewer VI:

  http://zone.NI.com/reference/en-XX/help/371361K-01/Glang/tdms_file_viewer/

  Or you can use the Toolbox for excel: http://www.ni.com/example/27944/en/ (allows you to transfer the data to Microsoft Excel).

  4. After reviewing the data, you will need to apply a filter. You can find the filter functions in the range of Signal Processing.

  

  Please let me know if you have any questions on this subject.

  Kind regards

• How can I filter the noises of thermocouple using a TC-2095 and SCXI - 1102c?

  Hi all

  I currently have four TC - 2095 s connected to the SCXI - 1102c inside an SCXI-1001 chassis cards. These thermocouples are floating and I get a good amount of noise (400 Hz 3 phases and same 60 Hz noise) when we turn on some equipment such as fans, and fans. Using this current set up, how can I filter the noise? Or I would need to put in place a new hardware configuration (e.g., the SCXI-1102 cards)?

  Hi RALoo,

  The 1102 C has a lowpass filter with a cutoff at 10 kHz frequency, so you will not be able to filter into the material with your current configuration.

  Your first option is to use a software filter.  LabVIEW has several functions that do this. More information can be found here: http://zone.ni.com/reference/en-XX/help/371361J-01/lvanls/filter_vis/

  The second option would be to change to SCXI 1102 cards as you suggest.  The low-pass filter of the 1102 was a cut-off adjustable to 2 Hz frequency, which will stop the noise of 400 and 60 Hz don't affect your readings.

• get the limits of the step of a sequence in a labview program

  I am writing a labview program to access the different properties of teststand sequences to automatically enter the data of the sequence for the documentation.

  The step.limits.high property is very difficult to recover from the teststand programmatically sequence by simply using the sequence as input file.

  Does anyone know how to get the limits on a stage in a movie file?

  Thank you very much, Mr President.  I'll take here.

• Beyond the limits of voltage on USB 6008?

  I use a USB-6008 to measure analog differential in the range of 3 to 5.3 V. I chose this range, because outside this range, I'm not interested in what the tension is, knowing that his "on the rail", but to aid resolution of the ADC in this range.

  So for a signal of ~0.05 supply V, I expected to read 3V, telling me that the voltage is lower than 3V, but again it returns 0.05v?

  As it was unexpected for me, could someone please explain what can / should I expect of my USB6008 of the responsed to the signals that are the limits? Is there an effect of "rollover"? Should you return the value to the limit? Depends on how far the limit is?

  Thanks for your help!

  Entry level do not think that way. You specify the range is that you wait for the signal and the DAQmx driver will set the most appropriate range that the device supports. The actual ranges are indicated in the guide. In your case, because you specify a max of 5.3, the device would be defined the +/-10 volts range.

• The PXI-8512 does support the series 2 filter or a similar mechanism to filter the messages?

  Hello

  I need to buy a couple of cards CAN interfaces for my test application and I wonder what you choose

  I already used a PXI-8461 to obtain data of the customer model under test, and due to the fact that sometimes the client bus can be very busy, but most of the messages is not interesting for my system that I use currently series 2 comparator/mask/filter to filter only the interesting messages.

  Without this filter, the PXI-8461 often returns an error due to overloading of the bus. With the filter, everything works perfectly

  Now I need to implement several testbeds with this same feature, and I plan to move to the new PXI-8512 for new.

  My question is: is the most recent PXI-8512 a device series 2 institutions? Support the filter 2 series or any other mechanism to avoid problems on the busy bus?

  Thank you for your support.

  Kind regards

  Davide

  Hi Davide.

  the PXI-8512 isn't a series 2 device. The PXI-8512 is a device of the X-NET family. X-NET is the technology whose use OR in support of CAN, LIN and FlexRay with a driver API. Series 2 devices use the former NI-CAN driver that only supports the CAN. All of the new devices are devices X-NET.

  Take a look to the following document:

  NI-CAN for NOR-XNET application migration
  http://www.NI.com/white-paper/9717/en

  On this page you will find the following statement for the function that you are already using:

  Transceiver filters were traditionally indicated for applications where only a few CAN IDs have been considered on a bus high load. In some cases, material NI-CAN support the bandwidth of the full bus, which leads to a buffer overflow. The hardware architecture OR XNET uses the engine NOR-XNET DMA-driven to eliminate the occurrence of buffer overflows. CAN of NOR-XNET interfaces are able to handle high load bus and transmitting at the maximum rate without coupling to buffer overrun. If your applications use the hardware filters extensively, NOR recommend setting up CAN opposes, or by reading the bus while using Network Interface objects. The best option for these applications is to modify your code to use the API OR-XNET native.

  Best regards, Stephan

• Cannot detect the limits of reverse front/market

  I have problems with the switches front and rear for my stepper motor system. When I created a NI Softmotion axis in Labview, no matter how to set limit switches, either appear as assets or both inactive, regardless of the position of the platform. I use for my end of race, photointerrupters. When I don't have the equipment under voltage, the photointerrupters works as expected and give a signal of 0 V when the platform is not the limit and V 5 beeps when the platform is at the limit. But when I try to use the Labview interactive panel (or in a VI elsewhere too) the limits are not detected and behave differently as well. I got a voltmeter connected to see how the tension behaved and pressure readings are odd. In a case when I tested the 'active' signal of each switch, was one of the limit switches to 6.7 V and the other was at 3.7 V, even if they had the same exact wiring and configuration. I'm completely stumped on how to connect these in the system so that they work or how to configure Labview to properly recognize these limits (meaning sourcing vs shipwreck and active State power). I searched the forums and manuals, but I can't seem to find a solution. Here are more details on the system:

  The engine is now a platform back and stepper motor is powered by a Kollmorgen P70530 stepper drive. To communicate between the command of stepper motors and the computer, I use a cRIO 9076 with a NI 9512 in the chassis. To connect the end of race in the system, I used the NI 9512 connection block 37 pins. Switch in the photo that I use is a strong GP1A05 CIPO Photointerrupter with connector. For this photointerrupter, there 3 pinout: a Vcc input (voltage source), a GND input and output Vout. The SCR is supposed to be connected to a source of 5V and GND to the mass (obviously) with resistance to pull-up between Vcc and Vout (I use a k 10 Ohm resistor as who has what has worked for me in the past with this specific photointerrupter). Vout is supposed to give a signal 5V, then the limit would be active and 0V when it is not active. How I had connected the photointerrupter to the connection block 37 pin was as follows: to the limit before, I had the VCC to pin 9 (+ 5V OUT), GND was on pin 3 (COM) and Vout was on pin 1 (before the deadline). For the inverse limit, I had the VCC to pin 9 (+ 5V OUT) GND was pine 24 (COM) and Vout was on pin 20 (inverse limit). I also tried to connect terminals GND the switch of the photo to the GND (shield) pin on the plate at terminals without success either. In regards to Labview, I am running Labview 2011 SP1 on my computer.

  If you have any ideas, I would greatly appreciate it if you would share that I am really confused with something that seems on the surface to be quite banal.

  Thank you

  Steve

  Steve:

  I am puzzled too-

  Manaual I looked:

  http://www.NI.com/PDF/manuals/372153d.PDF

  Your PIN seems correct.

  I assume you have a power supply connect to Vsup and COM.

  Research on page 3-10 for sourcing of the shows without pullup resistance, have you tried remove the 10Kohm?

  But watching page A-3 for levels of limits, it shows<5V for="" low="" and="" 11-30v="" for="">

  I'm confused-pg 3-10 looks like the 9512 provides its own pullup still pg A-3 show the necessary voltages for entries.

  I hope someone can clarify this.

  -AK2DM

• Locking of the limits of a graph on the front panel.

  How can I lock down you the limits of a graph of façade?  I don't want the user to select the scale and the type that will resize itself for the plot.

  I use the graphics property node to set the minimum and maximum on the scale, but it is still able to play with them.  I'm trying to show you idiot

  There is a property for editable scales node. You can always change when the VI is not currently running, but she she blocks during execution.