Filter unwanted numbers when changing values

Similar Questions

• TooManyObjects problem when changing values LOV

  Scenario is,

  I applied LOV on an attribute of the View object. but it gives an error when I change the value on LOV

  

  IM does not not the LOV first time, never seen error like this. How feature cache already have this PK in the whole of lines?

  J Dev Version: 11.1.2.4

  Of course, it will throw an exception because on the change in value, it corresponds to a record previously stored in the database (you ask Lov on a viewObject using its own data?)

  If you have this type of requirement let a transitional attribute and apply lov to this

  Ashish

• Dynamic action: need to refresh the area when changing value radio button

  Hello

  I use Apex 4.2 worm.

  I need to apply a dynamic action with the refreshment area.

  I need to refresh the area when I change the value of the radio button.

  To do this, I created dynamic action on the changes and select the refresh option to update the region.

  But it does not.

  If you want to check, then see below for workspace:

  Workspace: APEX_ISSUE

  User name: [email protected]

  Password: kaushik1@34

  Please use Page no 5.

  Thank you

  Hi Maxence,

  CORINE wrote:

  Hi Kiran

  Thank you very much.

  It works very well.

  One more I need help, I need to scroll in the radio button because I'm showing type of booking successively from top to bottom.

  How can I set scrolling in the option box.

  Thank you

  What do you mean by scrolling in the option button?

  I applied a horizontal scrolling for the region containing radio buttons by using the suite in the attributes of the region:

  style="overflow-x:scroll;"
  

  If you apply the change just of vertical scrolling x to y.

  I hope this helps!

  Kind regards

  Kiran

• Need value Flexfield update of the system point when master Org changed value

  I need synchronize a system point flexfield between all organizations, when the value of the org master system point flexfield is changed. In other words, take a step to copy the value of the org master in the same article to all the other orgs.
  
  I first tried a database trigger, but he gets locking issues due to the fact that the trigger would generate another instance of the same trigger.
  
  Any ideas on how I can do this synchronization?
  
  Thank you
  Kurz

  This is why I said relaxing carefully drafted .
  See the following topics
  http://www.DBA-Oracle.com/t_avoiding_mutating_table_error.htm and see the links given there as well on how to avoid the error table mutation.

  The other option is that you write a custom program that synchronize attributes between master and child records. And you run the program every x minutes/hours. In this way, you will have to deal with the mutation of errors in the table.

  Hope this helps,
  Sandeep Gandhi

• Object that can be bound but not updated when the value changes

  I have an object that is declared as [Bindable], which is updated in a component that is also declared as [Bindable] However, when the value is changed the user interface shows the change but the linked object never gets updated.
  
  Are there cases where related objects do not updated?

  Yes, as I said, pass the name of the property and the value in the change manager.

  Support rating allows you to set the value, not a switch statement. Some examples of code.

  Tracy

• LabVIEW digital control does not raise an event changed value when the button entry is hit

  I used to be able to type a value in a numeric control of LabVIEW, then press 'Enter' to trigger an event "changed value".  Then at some point, this no longer works.  I have to click elsewhere to trigger the event of value has changed.  The up and down arrow keys work always, but just typing a number then press enter does not work.  Is this a configuration settings got accidentally changed?  Help, please!

  
  

• Re: Keyboard typing letter and numbers when you press letter keys

  Hello

  My keyboard is typing letters and numbers when you press letter keys. I did im sure on the correct mode. You know FN - 11 / FN - 10. I have a Satellite L300D-11V running Windows vista Home premium. Can anyone help?

  I also tried holding down both shift keys for 20 seconds and two shift, and the ALT for 20 sec, but no change. Sticky keys are not on and the language of the keyboard is set to the United Kingdom.

  Any help would be great,

  Thank you.

  Hello

  You can connect the keyboard external usb to check?

• Picture of the events of clusters - change value and the mouse down

  Hello everyone

  I am facing a problem of triggering events using two arrays of clusters.

  I have two paintings of clusters: A and B. There is a Boolean control within each group and to maintain the two paintings in clusters at the same index value (indexVals), the vertical scroll bar of A is hidden but the vertical scroll bar of B is visible. I was using a case with 3 cases triggered by structure: the mouse down, timeout and the mouse upwards. The case of "mouse down" feeds of terminal 1, which makes the case "timeout" the waiting period. The case of "timeout" continues to fuel terminal 1 timeout and has two property nodes (one for A and for B) makes the value of B indexVals is written on the indexVals of a. inside the case of "mouse up" it has a value of-1 for the terminal timeout, putting an end to the process. OK, it was working great. But...

  Now I need to keep the same procedures described above, but I need to raise an event when the user clicks any boolean (led) change state. I thought about the event "change value", but when I click on the led to trigger the event of "change value", the "mouse down" event is also triggered.

  Any suggestions?

  The real VI is a little different from what I described, but the problem is exactly the same.

  Thank you

  Dan07

  Like this:

  

• Behavior strange table when getting values

  I have a table that contains the TypeDef'd controls and I need to get a reference to the control of each element individually. To do this, I use the values property of the array Index that I put to the index of the item that I want to get. From there on, I can get a reference to the control. This occurs when the value of the table is changed through a simple value change event.

  When you change the value of an element, and then by using the property of Index values for the reference control at this level, the control returned reference is not one that should be. What seems to happen when I change an element in an array, this item automatically becomes the index '0' in the table itself. It's a very strange behaviour and I tried to go around for a little while. I've attached pictures of the screw that I use to show you everything.

  In the first image, I stressed the important portions in green. Going from left to right, the first Green Watch box that I'll put the index at which the table should be starting at 0. The reason I do this is because it is possible that the index display may be replaced by another value and lag between what we expect, it is (0). In the loop for, I set the property to Index values for what is the value of i. This, in theory, loop through all the items in the table, and then I get the value and the reference of this element. In the probe window, you can see the different values of the sons and I will refer to this in a second.

  In the second picture you can see the value of the table on the real front. The values of the sensors in the first picture taken after that I changed the value of one of the properties of the "Alarm 7" line. The value of the façade, it is clear that the 'Alarm 7' index value is 2, but when you look at the probe in the first image there shows that it is at index 0. Anyone know why this is happening and how to get the references to their actual index?

  1.

  

  2.

  

  
  

• Control vs control tree string: "changed value" calendar race?

  I develop a configuration dialog box that uses a tree control and a tabbed pane and I have problems with the timing of the event. The tree control presents the structure of the connected equipment and the tabs pane shows the configuration for the selected node. The tree control is used as a tabbed pane may not have additional tabs created during execution, and the connected equipment vary from installation to installation. Rather than write a pane tabs hardcoded for each deployment, I use a flexible class structure that allows an "m x n' configuration - m zones with n channels per area, but n varies by area. By selecting a node in the tree fills the tab corresponding to the values of the node. The number of zones is limited the number of configured system views (discrete monitors) and the total number of channels is limited to the number of installed channels A/D. To capture the configuration data, each control in the tabs pane is a 'value changing' event, which sets the value of the element in the class.

  Now that you know what it is supposed to do, here's the problem: it only works if you do not click on the tree after a value is changed. For example if you enter in a new 'ladder' and then click elsewhere on the tabbed pane, the value is correctly associated with the node. If you click another node in the tree before leaving the field, the value is assigned to the node clicked instead. I looked at the timestamps for events and field "changed value" fires first, so the value of the tree should still be the original node. On the contrary, the tree seems to update before the event to "change the value" of the field is managed, even if the event of the field were pulled everything first. I read the value of the tree inside the event handler for the field, but there is no way to get the 'previous' value is the field control in the tabs pane.

  So where should I go from here? Is this a legitimate race condition, or am I just not processing events properly? I prefer not to post the code because it is pretty heavy with all its dependencies, but I can try to do a simple example.

  

  Cranky wrote:

  It seems that it is not an event filter for the change of the tree: value.

  This kind of surprises me.  But I couldn't find either.

  My other thought (like Altenbach) would store in a shift of the currently selected item register.  Since the change in value of the tree that happens after change in the value of the parameter, you read the registry value of offset for the change of setting and then update the registry to offset with the change in value of tree.  Do not forget to connect the values directly but for any event except the change in value of tree.

• structure of the event recorded does not change value

  I have a VI that communicates with an FPGA via a telnet interface.  I have several Boolean controls on the front panel.  When you click a control, it sends a write command on the face i in telnet to the FPGA.  Similarly, if a process in the FPGA himself wrote the same registry (that control written when I clicked on it), an order is generated in the FPGA and returned to the VI and the control (via a local variable) lights or unlights accordingly (based on value).  In other words, these controls are read-write...

  It's all workers, except for one important thing.  I have the code that runs through a structure of event whenever the value of the control changes.  I can see that this code executes in fact when I click on the control via the front panel.  HOWEVER - when something is generated in the FPGA finally changes the value of the control, the structure of the event does not, even if I see the value of the change of control on my front.

  A specific example, I have a control named CLIENT_LB.  When I click on CLIENT_LB, I see it lights up, and I see the event structure code run.  Now, if I have the FPGA process to set CLIENT_LB to 0, I see unlight on my front, but does not run the code structure of the event.  I have probes in place who have checked the associated local variable CLIENT_LB evolving impact of values.  The structure of the event reads: 'CLIENT_LB': value change.

  Shouldn't an event structure "value change" run when the value changes, regardless of whether if it happened manually (i.e. me by clicking on the control) or automatically (i.e. the FPGA written in VI and changes the value of the control)?

  The VI is great, and you would not be able to test it in any case unrelated to the material, to remedy that I've attached 2 screenshots, I have described below.

  1. This is where the string from the FPGA analysis occurs.  The chain between the sub - VI, and then the data chain part is hidden to determine if the Boolean value of the control is true or false.  I put a probe on CLIENT_LB, and I see that as the FPGA changes the value of the register, CLIENT_LB passes from false to true as a result.  I checked this several times.

  2. it is the structure of the event.  This code runs when I click on CLIENT_LB on my face, but does not run when the peak CLIENT_LB #1 local variable is changed.

  Writing to variables never fires events to "change the value. If writing should raise this event, use the property "Value (follow the signs).

  Norbert

• Why my event structure reacts to an event of "change value"?

  Hello

  I created a VI with 2 while loops and structure 1 integrated event. The first while loop creates a square wave and the value of the pass signal periodically - this event is registered by a property node and also shown on an indicator. I've linked the second event called "Mode-number: changed value" so that the signal and tried in various ways to "activate" the structure of the event (I tried to use event dynamic registration, property nodes, event tool etc.

  Attached to this message is a png of the VI file.

  No idea what could be the problem?

  Thanks much :-)

  Bruno

  You must use "user events. You should also look at some of the examples/tutorials on how to use them, see here: http://zone.ni.com/reference/en-XX/help/371361K-01/lvhowto/creating_user_events/

  What you have done is to try to enter a value in both structures change event - this is not actually generate a value change event. Value change events are generated when you (as a user) change a value of a control on the front panel.

  Alternatively, you can use the 'Value (signalling)' property that will allow you to update the value of an indicator and also generate the event changes its value. I think in your case if you are better to use user events.

• Masses of jpeg files, unwanted in "recently changed".

  file can not find hereMasses

  Masses of jpeg files, unwanted in "recently changed".  Impossible to delete, get the message that they are no longer at this location.  Where did they come from?  How can I get rid of them?

  Do you mean recent items on the Start Menu, or do you mean C:\Users\\Recent?  Are these these files recognize you or are they all strange to you?  I don't know where they came from-maybe there was a mistake in the Vista program or maybe they came to the temporary internet files or it could be a variety of reasons - it is very difficult to say.  It would be useful to know if you all recognize.

  First of all, I would make sure that the original files are all where they are supposed to be and do not have somehow been transferred.

  Try using one of the following free products to remove the files.  Unlocker to:http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.  After back if none of these programs does not work to remove the files either.

  I do one and then confirm that it has been also removed from its normal location.  Then try a couple just to be safe.  Once you are sure that the originals are not as well removed, then you can delete everything else.  If the originals ARE deleted, we have a different problem.  Post back and we'll try to solve it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to update the table when change list item in the classic report

  Hello
  I worked with apex 4.2 and I create normal classic report with list (named loved) select a column, now I want to update the table when the user changes the list with the new value, I can't create a dynamic action to do this, I create checkbox with the primary key and the loop for check point to update the table but I can not get the value of the list item. and for more speed, the user want to do it when changing the value from the list.
  
  My question
  1. how to do it in javascript and get the value of the list item and update the table with the new value
  2. do I have to use the API to create the list item so I can get the value of the report item or what.
  
  
  
  
  
  Thank you
  
  Ahmed

  You can find a lot of information in this forum (and outside in google) when you search for AJAX processes and demand. However, the tutorial in the link below should be useful:
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/hol08/apexweb20/ajax_otn.htm

  BTW, if we answer your question, don't forget to mark the appropriate post as correct. It will help all of us in the forum.

• Data affinity: Duplication of entities when the value of associatedKey?

  I'm trying to implement data affinity. I have a domain of the FootballClub and player model. A player is held by a FootballClub. Players and Clubs are cached in separate NamedCaches and I use serialization of java base.
  
  Affinity seems to work - I connect the partition using a BackingMapListener and you can see that a player is going to the same partition as the club owner. If I start a new data node, and the score moves to the new node, that the player and the Club move together.
  
  The problem I have is that if I change the owner of an existing player and put in my reader updated in the cache of the drive, I don't update the existing player entry in the cache - I get a brand new player. This is the expected behavior?
  
  If it is not planned, anyone have any suggestions as to where I could go wrong? I tried with a KeyAssociator and by setting up KeyAssociation on Player.Id.
  I also tried excluding the clubName (associatedKey), in the methods Player.Id.hashcode () and equals() and make the transitional clubName in this class.
  
  I connect MapEvents and you can see that the toString() of the binary version changes key player when the value of KeyAssociator.getAssociatedKey () changes slightly, but convert the key to original format using BackingMapManagerContext.getKeyFromInternalConverter () always returns the same value.
  
  I'm new on consistency so quite possible something basic wrong I.

  user6871200 wrote:
  I'm trying to implement data affinity. I have a domain of the FootballClub and player model. A player is held by a FootballClub. Players and Clubs are cached in separate NamedCaches and I use serialization of java base.

  Affinity seems to work - I connect the partition using a BackingMapListener and you can see that a player is going to the same partition as the club owner. If I start a new data node, and the score moves to the new node, that the player and the Club move together.

  The problem I have is that if I change the owner of an existing player and put in my reader updated in the cache of the drive, I don't update the existing player entry in the cache - I get a brand new player. This is the expected behavior?

  This is the expected behavior: If you have actually changed the key, it's a different key, and you put the same player with a different key in the cache. Why it would affect old Scripture?

  A key in the plan is considered as immutable and you violate this principle.

  The problem is that your modeling is defective: owner should not be part of the key, or must be immutable. In your case, it should not be part of the key (but then you can't affinity). Question is: why do you want to have an affinity between the owner and player, anyway?

  Best regards

  Robert