final trigger for lightbox seems to load in Active state

Similar Questions

• Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

  Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

  Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

  Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.

• Help design a trigger for an analog voltage signal

  Hello guys,.

  I have a real problem one design trigger for an application, what I do is to power a motor and measure consumption current and voltage during each operation. What I would do is to begin to acquire the signal once the voltage rises to a certain value and finish when it falls to a certain value. The equipment I use is a cDAQ 9178 with a NI9205 and 9221 modules.

  Any help / samples / detailed explanation will be really appreciated. I have no idea on how to work with the outbreak of the vi in Labview.

  Concerning

  SergeArmz

  Finally after a lot of research, tests and many developments, this is a VI that I developed and who is able to do what I was looking for. Thanks to the guys who helped me out to understand how solve my problem.

  For all those who may have the same problem I had, I enclose the VI.

  And of course if you can improve on what I did will be great, I think it's the purpose of this forum

  See you soon!

  SergeArmz

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

  Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

  The white flash indicates logic receives an order of what it can not do... Its like a visual error msg.

  I suspect a device connected to your Mac sends an error msg... or even your keyboard typing accidentally pressed causes the white flash error...

• Trigger for USB-6251analog

  Hello

  Generate a rectangular signal of AO on AO0 (white) while playing a Sin on AO1 (red) signal. I want to record on AIx, while the tension of the rectangular signal is max.

  

  Currently I physically route AO0 to PFI0 and use it as a trigger for the analog input:

  

  But the VI fails because AIx does not detect the edge of the PFI0 of the trigger. How to fix the VI to work proberly?

  Thank you

  VI can be found here: http://forums.ni.com/t5/Discussions-au-sujet-de-NI/USB-6251-router-Analog-output-pour-trigger-Analog...

  Hafiz asean.support solution:

  I looked at your code and there was a problem with the installation of the acquisition of the chain to HAVE.

  Acquisition of analog input has been configured incorrectly
  In your code, you set the program to use calendar settings based on a waveform. However, when you build the waveform, I believe you accidentally used the frequency instead of the dt of the waveform to build. Removal of the inverse function ensures that the correct values are passed in. Originally, the AI sampling period was put at about 4000 seconds, which in turn causes the trigger to expire.
  

  Take note that the production and the acquisition is not exactly at the same time. You can see the following diagram:

  

  Thank you haha!

• I'm considering buying a computer with Windows 7. Is there a driver for my Canon Multipass F50 printer? I have Office Professional for XP - can I load office software on the new computer with Windows 7?

  I'm considering buying a computer with Windows 7.  Is there a driver for my Canon Multipass F50 printer?  I have Office Professional for XP - can I load office software on the new computer with Windows 7?

  Page drivers Canon MultiPASS F50 & the downloads shows nothing for Windows 7 (or even for Vista), so I doubt that it works.

  Microsoft Office XP is not compatible with Windows 7.  Office 2003 and Office 2007 are.

  I wish I had better news for you.  :-(

• Visual Studio Plugin: Waiting for Simulator to complete loading... forever.

  Win 2K 3, Visual Studio 2 k 8

  I created a Web Site (does change all the files - just left default.aspx).

  Then I changed to browse with default for blackberry.

  Then I pressed the green button of debugging.

  Beginning BlackBerry MDS - CS has been rapid.

  Then it opens emulator "BOLD" BlackBerry, and after awhile, I clicked on 'Détails' on the dialog box 'start debugging '. This is what he had:

  [Start BlackBerry MDS - CS] From BlackBerry MDS Connection Services...
  [Start BlackBerry MDS - CS] FACT!
  [Starting Device Simulator] Launch Fledge: Throwing file - C:\Program Search Plugin VS9 Motion\BlackBerry 1.2\handheld\simulator_4_6_0\fledge.exe, settings - / app = Jvm.dll / Pocket = 9000/app-param = DisableRegistration/app-param = JvmAlxConfigFile:9000.xml/app-param = JvmDebugModeOff/session for partner = 9000/app-param = MdsDebugn/app-param = BrowserDebugPort:5557/app-param BrowserDebug =n/app-param = NoTutorial/Dungeon-lcd-on/pin = 0x2100001A/app - param = BrowserDebugPort:5557, skin - BlackBerry 9000, PIN - 0x2100001A
  [Starting Device Simulator] Waiting for Simulator to finish loading...

  The device was done loading some time ago and I can even open the web browser in Microsoft device emulator and go to bing and even my http://localhost:xxxx / website1, or whatever.

  Any ideas?

  I have only 1 network card.

  I tried with my firewall and turn off.

  I got further away now though.

  I realized that if I hit F5 and then launch and I click 'Cancel' and then go to Task Manager and instead of killing the user interface process that loads the emulator instead of this I close the RIM.NET.XXX or whatever the process.

  Then wait for the emulator to access the main screen then press on F5 again to join occurs but the emulator can't hit google or my local host.

  A companion of mine office has been able to operate its box with the same approach "kill process".

  It is running Win XP with Visual Studio 2 k 8 (without service pack 1 even if the requirements say it needs service pack 1)...

  Do you think its because my OS is Win 2 k 3?

  And why did kill Rim.Net process also?

• How to write the trigger for update or delete multiple columns in a table?

  Hello

  I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.

  Header 1	Header 2	Header 3	Header 4	Header 5	Heading 6	Heading 7	8 header	Header 9
  EMP_ID	EMP_NAME	DESIGNATION	TEAM_ID	TEAM_LEADER_ID	EMPLOYEE	MANAGER_ID	HIRE_DATE	RELIEVED_DATE

  --

  Thank you.

  Hi Joel,.

  Venky_prs wrote:

  Hello

  I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.

  Header 1	Header 2	Header 3	Header 4	Header 5	Heading 6	Heading 7	8 header	Header 9
  EMP_ID	EMP_NAME	DESIGNATION	TEAM_ID	TEAM_LEADER_ID	EMPLOYEE	MANAGER_ID	HIRE_DATE	RELIEVED_DATE

  --

  Thank you.

  You can try something like this given below to complete the historical table on update and delete.

  create or replace TRIGGER  "CLONE_EMP_UPDATE_DELETE"
  BEFORE DELETE OR UPDATE ON EMP
  FOR EACH ROW
  DECLARE
      PRAGMA autonomous_transaction;
  BEGIN
  INSERT INTO JOB_HISTORY("EMP_ID","EMP_NAME","DESIGNATION","TEAM_ID","TEAM_LEADER_ID","SUPERVISOR_ID","MANAGER_ID"
  ,"HIRE_DATE","RELIEVED_DATE")
    VALUES(:OLD.EMP_ID,:OLD.EMP_NAME,:OLD.DESIGNATION,:OLD.TEAM_ID,:OLD.TEAM_LEADER_ID,:OLD.SUPERVISOR_ID,
  :OLD.MANAGER_ID,:OLD.HIRE_DATE,
  :OLD.RELIEVED_DATE);
  COMMIT;
  END;
  

  Hope this helps you,

  Kind regards

  Jitendra

• Some time ago I bought Adobe Acrobat 9 Pro for my Samsung but have now moved to a Mac. Now the sftware (disk) won't laod on the Mac. Adobe 9 is quite adequate for me - how I load on my Mac please?

  Some time ago I bought Adobe Acrobat 9 Pro for my Samsung but have now moved to a Mac. Now the sftware (disk) won't laod on the Mac. Adobe 9 is quite adequate for me - how I load on my Mac please?

  Hey Barrie,

  Acrobat IX is no longer available for download. Acrobat 9 Pro license is platform specific, so it does not work on your Mac in any case.

  You buy Acrobat DC for your Mac.

  Kind regards

  Rahul

• Wait for the window to load acrobat pro dc

  I get this error when trying to install acrobat pro dc: timeout for the loading window.  It has already been downloaded, and I clicked Yes when asked for permission to make changes.

  Please check:

  • Timeout for the window to load?
  • https://helpx.Adobe.com/PDF/acrobat_reference.PDF

  Concerning

  Stéphane

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• What is the alternative of F5 BIG - IP LTM for OEM 12 c load balancing

  We want to apply the service load balancing, however recommended to oracle

  F5 BIG - IP LTM for OEM 12 c load balancing

  How much does it cost? and is there a free alternative, we can use which supported by Oracle?

  Thank you

  I doubt that my company will pay for the SLB.  If not buy one of these solutions, which can set up?

• Once you buy CC for AE can you load on two machines?

  Once you buy CC for AE can you load on two machines?

  Yes.

  This is discussed here:

  Creative cloud / Common Questions

• Create the trigger for multiple users

  I am trying to create a trigger for a DDL event which gives an error for 2 users when they try to create a database object or a table.
  
  Here is my code. When ran it gives me the following error: "WARNING: trigger created with errors of complication."
  
  Any idea would be appreciated.
  
  Thank you!
  
  CREATE OR REPLACE TRIGGER trigger_before_create_object
  BEFORE YOU CREATE ON THE DATABASE
  
  BEGIN
  
  IF USER = USER OR "VPD_CLERK1" = "DBSEC_CLERK."
  THEN
  RAISE_APPLICATION_ERROR (' you do not have the privilege to create tables or other database objects.) Contact your administrator if you need the privilege. ") ;
  END IF;
  END;
  
  Published by: mkmety on April 20, 2013 12:10

  Welcome to the forum!

  Whenever you post provide your Oracle version 4-digit
  >
  I am trying to create a trigger for a DDL event which gives an error for 2 users when they try to create a database object or a table.

  Here is my code. When ran it gives me the following error: "WARNING: trigger created with errors of complication."

  Any idea would be appreciated.

  Thank you!
  >
  And to alert you to the need to view the errors you got. If you did you will see this:
  >
  PLS-00306: wrong number or types of arguments in the call to "RAISE_APPLICATION_ERROR.
  >
  Oracle cannot raise your exception if you:

  1. do not define an exception to throw
  2. don't tell Oracle how exception to throw

  See the section "Defining your own Error Messages (procedure RAISE_APPLICATION_ERROR)" in the doc of the PL/SQL language
  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/errors.htm#i1871

  This article has examples that show how to raise your exceptions.