Final version of the provider managed with Oracle 12

Similar Questions

• What is the latest version of the role manager

  Nice day
  where can I download the latest version of the role manager, also if there is a patch for the latest version
  Very grateful

  Roles Manager Oracle (10.1.4.2.0) can be downloaded from

  http://www.Oracle.com/technology/software/products/IAS/htdocs/101401.html

  Doc:

  http://download.Oracle.com/docs/CD/E14592_01/index.htm

  All patches are available from My Oracle Support

• Setup error ODAC 12 c R4 client on the same machine with Oracle 11 g 64 bit for Windows database

  I have Oracle objects and mobile application development with:

  Windows 7 64-bit OS

  Base Oracle = C:\ORA

  Database Oracle 11 g 64-bit 201, home = C:\ORA\DB11G201

  I was running in Visual Studio 2010 and the ODAC customer Oracle 32-bit in another home = C:\ORA\DB11G201CLIENT32

  All was well for a few years on that set up.

  I decided to upgrade to Visual Studio 2013 and .NET 4.5

  Deletion of Visual Studio 2010 and installed Visual Studio 2013.

  I did a normal uninstall of the Oracle 11 g 32-bit client using the rebooted, Oracle Universal Installer.

  The customer old house was gone.

  I downloaded the ODP.NET12C 32-bit Oracle with VS tools R4 and began the installation of the client.

  I selected English and built-in OS account

  I chose Oracle base = C:\ORA

  I chose hone Oracle = C:\ORA\DB12CR4CIENT32

  But I encounter the error:

  [INS-32104] User Oracle Home specified is not the owner of the Oracle Base specified.

  The owner of C:\ORA's ADMINISTRATORS.

  When should I do?

  For guests of 12 c, opened a NEW BASE and a NEW HOUSE?

  Created an ACCOUNT to STANDARD USER and the select statement, but keep c:\ORA and the new C:\ORA\DB12CR4CIENT32 of the House?

  I'm a hold out for migration to Oracle 12 c database because they thrown into the very useful tool Oracle Database Control and replaced by something watered down.

  So I like to keep the Oracle 11 g 64-bit database.

  but Visual Studio 2013 support, use the 12 c R4 32-bit and 64-bit support drivers unmanaged.

  I would use (and use) Managed drivers, but they do not work in database 11g FIPS-140 active environments.

  Thank you for your help and comments.

  Hello

  This is expected because you install 12 c in Base Oracle who has home 11g.

  From 12 c, the installation program has promoted "Oracle Home User' where you can perform the installation with built-in admin user or a secure non-admin user.

  As documented at https://docs.oracle.com/database/121/NTCLI/install.htm#NTCLI1283

  "Oracle 12 c Release 1 (12,1) database client may not share basic Oracle with houses of the Oracle database versions, such as Oracle Database 11 g Release 2 (11.2) and sooner."

  Please see the information listed in the link above for more information.

  Bascially, you need to install in a different Oracle Base and can have all this work.

  Kind regards.

• Previous versions 11.2 database managed by Oracle Restart

  Hello
  
  SAGNA: AIX 6100-06
  
  Recently installed on the same system and user:
  * Oracle Database 11.2.0.2 Grid infrastructure from stand-alone server (Oracle Restart).
  * Oracle Database 10g R2 (10.2.0.5)
  * Oracle Database 11g R1 (11.1.0.7)
  * Oracle Database 11g R2 (11.2.0.2)
  
  Some questions have been raised.
  
  In the documentation says:
  
  Please note that Oracle Restart can manage existing resources of 11.2 and from where you can install the Oracle network infrastructure only for existing database 11.2. However, versions of Oracle database before 11.2 can coexist on the same server without managed by Oracle Restart.
  
  This means that DBCA (10g House) will not add the database in Oracle restart?
  
  I did some tests:
  
  I created a database using DBCA at 10 G of the database was created successfully with the ASM. But the database has not been added in Oracle Restart.
  
  I added manually in Oracle 10g database restart using srvctl. And it works perfectly.
  
  Start and stopped at the database using srvctl including dependence diskgroup.
  
  I forced an ABEND in my database by killing the process LGWR Oracle Restart restart my database automatically.
  
  I know there is a difference between work and be certified.
  
  Management of Oracle database before 11.2 on Oracle Restart is certified or not?

  Hello

  Management of Oracle database before 11.2 on Oracle Restart is certified or not?

  Not certified.

  See this note:

  * 11.2 Restart oracle cannot handle alone 10.1.x instances [954552.1 ID] *.

  Oracle makes it quite clear:

  Do not use 'Oracle Restart' to manage Oracle 11.2 - no specific resources (database instances, etc.).

  Kind regards
  Levi Pereira
  http://levipereira.WordPress.com

• vGPU, being not recognized in Windows (but visible of all kinds in the Device Manager with!)

  Hello

  I hope I found the right place to ask this question.

  Im trying to configure with network cards K1 on esx vGPU 6 and windows 2008 R2.

  I managed to get the GPU passthrough works fine but I want to continue vGPU (last n more)

  That's what I've done so far.

  Installed esx6 on Cisco UCS C240 M4 (CPU value high performance max flow and mem)

  installed the last grid VIB Manager

  
  

  i.e. esxcli vib software install - no.-GIS-check-v /vmfs/volumes/ISO/vib/NVIDIA-vgx-VMware-346.27-1OEM.600.0.0.2159203.x86_64.vib Result of the installation: Message: operation completed successfully.

  
  

  NVIDIA-smi reports 8 x 4gig GPU

  
  

  Using the vmware webclient service, I create a virtual machine and assign it a profile of vGPU (180 in this case). He tells me that I have reached the maximum number of devices of this type (google was not helpful about this message).

  
  

  In the vSPhere console, I see a PCI Device 0 added to the new virtual machine, it is said he has not supported with a note saying "this virtual device type is supported but support it is not supported on the current host... »

  
  

  When I install windows on this virtual machine, I get a yellow! on the standard VGA graphics card with error device cannot start Code 10. Any attempt to install NVidia drivers cannot complain that it cannot detect the graphics hardware.
  

  
  

  The thing is, I'm sure I got this work before, but now it feels like Ive hit some limits as suggested by the message "maximum number of devices.

  
  

  I tested using vmware 5.5 and 6.0 tools
  

  
  

  Any suggestions aside from just rebuild again?

  Hmm, it seems that the comment on the unsupported PCI device may be an effect to use instead of the web client vSphere client. I created a new virtual from Windows 7 machine and used the provided in the package VIB of nvidia driver and it worked. In the console PCI device said still not taken in charge. I will try to update the driver in our w2k8 server now.

  Update: Yes, it seems that I used the wrong driver package. It seems that I can have tried to use another driver which I suppose was for use with vSGA or pass through.

  nothing to see here, move along

• Who will be the best option with Oracle 11 g dd loadbalancing and failover

  We use weblogic 10.3 with multipool with each source of data pointing to each RAC node. The Multipool manage failover and load balancing scenario. With 11g database now, we have the ability to use SCAN where weblogic will point to a service and load balancing/failover happen side DB.
  
  Published by: user1122 on April 12, 2010 10:47

  Stick with MultiPools for now. SCAN will confuse pools WLS and will harm XA if you
  using XA, because WLS assumes that all connections in a pool are identical. If some are
  bad, WLS assumes that all are and can kill all the. We try to ensure that all the work
  in a given transaction goes to a specific node of the RAC, but if the pool is heterogeneous
  We can spoil, and depending on the version of the DBMS, it will suffer performance
  questions to the best and can corrupt and if it gets worse...

• How to build the file manager with cascade?

  Guy of Halo,

  How can IM new with waterfall, I build a file manager with cascade? is there a lesson or sample

  Thank you

  concerning

  Hello

  Can you clarify a little more what you mean by FileManager? Do you want the opportunity to browse and select files? If so, take a look at this thread. http://supportforums.BlackBerry.com/T5/Cascades-development/using-native-FileBrowse-and-FileSave-dia...

  See you soon

  Swann

• Want to know primary and secondary configuration to the call, Manager with the voice gateways

  Hi all

  Hope you all are doing well, I wanted to know that we have two other PRI service provider and we want one of them are primary and secondary schools on the other. We have two supplier dedicated 4-4 finish lines. Please provide me with the part of configuration that are required in this case and how to re a SP for primary education and another SP for secondary lines.

  Thank you

  Arjun keita

  Hello Arjun,

  For the full bridge configuration you can check the guides below, but for the PRI redundancy, you create dial-peers and specify the feedback:

  https://www.Google.co.in/URL?SA=t&source=Web&RCT=j&URL=http: / / www.cisco...

  Voice POTS dial-peer 1

  Destination-pettern 0 t

  Port 0/0/0:15

  Preference 0

  Dial-peer voice 2 pots

  Port 0/0/1:15

  Preference 1

  Dest-model 0 t

  Dial-peer voice 3 pots

  Description incoming only

  Incoming called-number. T

  Direct inward dial

  Aseem

  (Please rate if useful)

• Targeting different versions of the operating system with the same code

  Hello again,

  I'm looking to use some features of the OS 5.0 such as the transitional API.  Is there sort of having a base code that will compile in different versions of the JDE, but exclude the code blocks if the OS does not meet the requirements?

  For example, transitions on a device to OS 5.0 but not appear on device OS 4.5.

  Ideally, I'm looking for a solution that would integrate directly with Eclipse and debug without any extra steps in the two versions of the operating system.

  Try to do research on the "preprocessor directives", you can use this to do what you need.

  Basically, you wrap the code OS 5.0 in the guidelines such as:

  #ifdef VER_5
  System.out.println ("This compile for 5.0");
  #else
  System.out.println ("This compiles for no 5.0");
  #endif

  Then, enable you or disable directives in the compiler generate COD versions for each platform.

  Jason

  www.lcamobile.com

• Opening of a newer version of the Captivate file with an older version

  Hello

  Can someone explain the basic rule about open projects that were created with a different version of Captivate.

  For example - I work with version 5.5 and if someone sends me a project created with v7 or v8 or v9 (although there's a v9), I will be able to open them?

  Even - if I send to someone who has the v7, v8, v9, will a project I created with v5.5 - be able to open it?

  Thanks a lot for a (simple) explanation.

  NEL

  ++++++++++++

  You can open a file created with an earlier version to a newer version, but you'll be never sure that it will work as expected, especially if you skip several versions. Answer to your second example is YES BUT!

  It is not possible to open a file created in a newer version with a previous version, has never been possible with Captivate files. Response to your first example is no.

• Cannot change versions of the Tablet/phone with editing in the browser?

  Hello! I can't edit in the browser. The website is transferred to an FTP host and I'm editing of the site with inbrowserediting.adobe.com.

  The desktop version works great – when I fly over areas of text, I get the blue highlight and 'Edit' button, etc - but when you view the versions of the Tablet and phone I can't modify any text or replace images at all. It just seems to view the site with no editing features.

  Any help would be appreciated!

  Thank you

  Ben

  Hey Ben,

  We have also received your request for support on this issue and we are now looking at the issue.

  It is probably related to a custom HTML Widget, which performs the slide in animation for the pages of the Tablet and phone, somehow affecting the functionality of the editor.

  Thank you

  Hug

• How to integrate the glass fish with Oracle JDeveloper application server

  Hello
  is someone's idea on... can we integrate server with Jdeveloper glass fish...
  I have to use the application server with the oracle Jdeveloper glass fish,
  If one achieve this feature before... Please suggest me the steps... How can I do this
  
  thanking you :)
  Nikhil

  Hello

  There is no support yet as server integrated into JDev Glasfish currents

  Frank

• Multiple instances of the APEX version share the same House of Oracle?

  Hello

  I'm working on the database oracle 11.2.0.2

  I have 2 instances DEV and PROD sharing the same oracle home.

  For the moment, the apex version is identical to 2 instances (4.2.1.00.08) and installed together with the embedded PL/SQL gateway.

  is there a potential problem for upgrade only version apex for the dev to 4.2.6 instance?

  concerning

  JM

  jmniard wrote:

  I'm working on the database oracle 11.2.0.2

  I have 2 instances DEV and PROD sharing the same oracle home.

  For the moment, the apex version is identical to 2 instances (4.2.1.00.08) and installed together with the embedded PL/SQL gateway.

  is there a potential problem for upgrade only version apex for the dev to 4.2.6 instance?

  An instance of the APEX using EPG exists entirely within the database once it is installed. External dependencies only would be on the scripts of utility provided with the installation media. Extract the installation files to the version files in a subfolder of the APEX of the ORACLE_HOME (apex/4.2.1, apex/4.2.6 etc.), to ensure you have access to the 4.2.1 and 4.2.6 install files so that should need you to execute a utility script (apxchpwd.sql for example) that you are running the correct for the involved database version.

• Installed Adobe CC Suite can is more updated with the Application Manager with VISTA 64?

  My system to my Win 7 Pro Office, but my home system is Vista 64 bit. After several weeks of work in the office and finally one day open my home office, I find that subsequently installed Adobe CC is no longer may be signed or updated with Application Manager. I can't open the application (Photoshop, Illust...) to allow the so I can put Win 7 on the system and reinstall without support me running on Ember and suck up all of my time to get the tools I pay to work.

  Some update finally final straw and I can't you connect, open, allow or use my CC tools. Was it a "planned obsolescence", they did not announce this with any effort?  In fact, Manager application can not find even the internet to connect to the server, so you can connect! What?

  Adobe has lost its way, or is now inhabited by demons? Now that the company has itself isolated from "responsible" buyers of their investment, we, public and customer contact and so they pull the plug on operating systems inherited without sufficient warning. This saves millions of programmers coding timing going all in mainly supporting latest versions of OS. What happens then?

  I was an early user of Photoshop in the beginning of the 1990s, and before that in 1984 Lumina 16 and 32, so I saw it happen. I was a beta for Illustrator rises too much.

  Really bummed to de-soulling of a machine tool company.

  Any application that is creative cloud should not be disabled as CS6. It is best that you can, but it is not necessary. When you install these applications on another computer, you will get a warning saying that you have exceeded your NSO sign, then invites you to sign other computers. It's so MUCH EASIER to have to disable the old program. I would turn off CS6 and all other CC pre apps. CS6 really is not supposed to work even on Vista, it kind of works on XP, but not well.

• Latest version of the Power Manager

  Hello

  I have problems with the management of feeding on VISTA SP1 RC Refresh and would like to know if v8.03 is the latest driver.

  Specifically, the latest version of SP1 crashes when you have Toshiba Power Management and Wireless Lan to operate. Deactivation of the Intel PRO/Wireless 3945ABG driver in Device Manager solves the problem.

  Hello

  As far as I know at this time SP1 for Vista is still beta and now Toshiba offers not preinstalled Vista SP1. I guess that after installation of SP1 problems may occur but before Toshiba offer recovery with SP1 image implemented all problems must be fixed.

  It also means that all drivers of most recent, tools or utilities will be available on the support page. This was the case in the past and I'm sure that the same thing will happen in the future. Because of that I really don't think that someone can give you instructions specific how to handle problems after the installation of SP1.

  In any case, it will be interesting to know exactly what is happening, and if you have time please let us know if there is a problem.

  Bye and good luck!