Financial Incremenatl for Analyics load using Informatica-Performance problem

Similar Questions

• Can I use my iPhone for the load

  Can I use my iPhone for the load?

  Yes

• Using Flex Performance Profiler for profiling Flex with Java Applications

  Hello

  I intend to use the Flex Profiler to profile my request.
  I have developed a model of application using Flex MXML, ActionScript classes for events and Cairngorm, Java , Oracle database and Blazeds.

  Can I use Flex Performance Profiler to profile my request. ??

  I ask this question as I have ad read the threshold to Adobe site and my Application includes java methods

  "You can use the Profiler to profile ActionScript 3.0 applications.

  Can someone please tell me what this means? and I can use the Performnace Flex Profiler.

  Season me please.
  

  If you want to evaluate the response time when you call a service, you can use Charles Web Debugging Proxy as it is able to control the calls using the AMF protocol.

  If you want to monitor is the ActionScript objects from Java in the class that retrieves the result in the service, you can use the Flex Profiler.

• When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

  Original title: I'm loading Quciktime.

  When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

  Hi Tonyb13apb,

  ·         The issue is limited only during the installation of QuickTime?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Uninstall and reinstall QuickTime and check.

  http://support.Apple.com/kb/HT1925

   

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, select run.

  b. type msconfigand click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer.

  If the problem persists, you can contact Apple support for more help and information.

  http://support.Apple.com/kb/HE57

  Let us know if it helps.

• ODI 11.1.1.7 to connecing HFM 11.1.2.4 failed with the error 'error occurred in driver then the connection to the application of financial management [ApplicationName] on [HFMCluster] using the user name [admin]

  Hi experts,

  I'm trying use odi 11.1.1.7 to load the data in HFM 11.1.2.4 and it failed during the loading in the data store HFMData with the below error message:

  org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File '< string >", line 3, in < module >
  at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  
  com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: error occurred in the driver when connecting to the application of financial management [IFRSHFM] on [HFMCluster] using the [admin] username.

  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1930)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1073)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: Traceback (most recent call changed):
  File '< string >", line 3, in < module >
  at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  
  com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: error occurred in the driver when connecting to the application of financial management [IFRSHFM] on [HFMCluster] using the [admin] username.

  at org.python.core.PyException.fillInStackTrace(PyException.java:70)
  at java.lang.Throwable. < init > (Throwable.java:181)
  at java.lang.Exception. < init > (Exception.java:29)
  to java.lang.RuntimeException. < init > (RuntimeException.java:32)
  to org.python.core.PyException. < init > (PyException.java:46)
  to org.python.core.PyException. < init > (PyException.java:43)
  at org.python.core.Py.JavaError(Py.java:455)
  at org.python.core.Py.JavaError(Py.java:448)
  at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
  at org.python.core.PyObject.__call__(PyObject.java:355)
  at org.python.core.PyMethod.__call__(PyMethod.java:215)
  at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
  at org.python.core.PyMethod.__call__(PyMethod.java:206)
  at org.python.core.PyObject.__call__(PyObject.java:397)
  at org.python.core.PyObject.__call__(PyObject.java:401)
  to org.python.pycode._pyx11.f$ 0 (< string >: 6)
  to org.python.pycode._pyx11.call_function (< string >)
  at org.python.core.PyTableCode.call(PyTableCode.java:165)
  at org.python.core.PyCode.call(PyCode.java:18)
  at org.python.core.Py.runCode(Py.java:1204)
  at org.python.core.Py.exec(Py.java:1248)
  at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
  ... 19 more
  Caused by: com.hyperion.odi.common.ODIHAppException: error occurred in the driver when connecting to the application of financial management [IFRSHFM] on [HFMCluster] using the [admin] username.
  at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
  ... more than 33
  Caused by: com.hyperion.odi.common.ODIHAppException: error occurred in the driver when connecting to the application of financial management [IFRSHFM] on [HFMCluster] using the [admin] username.
  to com.hyperion.odi.hfm.ODIHFMAppConnection. < init > (ODIHFMAppConnection.java:56)
  at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:185)
  ... more than 38
  Caused by: com.hyperion.odi.hfm.wrapper.HFMException: error occurred in the driver when connecting to the application of financial management [IFRSHFM] on [HFMCluster] using the [admin] username.
  to com.hyperion.odi.hfm.wrapper.HFMConnection. < init > (HFMConnection.java:54)
  at com.hyperion.odi.hfm.wrapper.HFMServer.getConnection(HFMServer.java:87)
  to com.hyperion.odi.hfm.ODIHFMAppConnection. < init > (ODIHFMAppConnection.java:50)
  ... 39 more
  Caused by: com.hyperion.odi.hfm.wrapper.HFMException: error loading string resource for the code '103 '. Error code: 1813 (x 715)
  at com.hyperion.odi.hfm.wrapper.HFMDriverJNI.getConnection (Native Method)
  to com.hyperion.odi.hfm.wrapper.HFMConnection. < init > (HFMConnection.java:48)
  ... more than 41

  I've referenced Doc ID 1379286.1 copied below files ODI_HOME\agent\drivers and HFMDriver64_11.1.2.dll renamed to HFMDriver.dll and the file added to the variable 'path ': env

  odihapp_common.jar

  odi_hfm.jar

  HFMDriver64_11.1.2.dll

  msvcr100.dll

  MSVCP100.dll

  And I don't know that HFMDriver.dll is accessible by the studio of ODI (because I can't rename it when ODI studio was opened).

  So can someone please give me some advice? Thank you.

  Eric

  Hi CPR1,.

  Sorry for the late reply (I probably missed the system message), yes I asked the support of oracle and got the answer: KM for HFM 11.1.2.4 module is no longer supported. If I can choose only to customize the interface using the JAVA API or use FDMEE.

  Thanks for all the help, but it seems using ODI to load the data in HFM version 11.1.2.4 + will is no longer supported.

  Eric

• How to find the reason for the high use of the processor - shared server process?

  Hello

  I have a Linux server with instance and an oracle 11.2.0.3. The database is configured for shared server. I do not know the application using the database, but they have performance problems. When I check the server I see, that ora_s001 use a processor Core with 90 to 100%. Is there a way to know the reason for the high CPU load? I'm not very adept at finding bottlenecks or bad sql statements. What I found ist, that some users have very high logical_io and the same users have much cpu_usage.

  What can I do next? Thanks for the tips.

  You must Server multi-user shared for this number of sessions. The main objective os using MTS is reducing the memory usage on the server for the UGA and PGA of sessions.

  About the CPU usage, you must session which uses this server shared at the time, with process $ v and v$ session to trace. From there, check the SQL_ID running and then get his stats. This is probably one or two SQLs with large number of I/o logic. This happens most of the time due to incorrect cardinality estimates and/or bad statistics on the subject which causes suboptimal plans to generate.

• 'Command for incremental load' DAC contains @DAC_ *.

  Hi Experts,
  I work on 10.1.3.4.1 DAC and uses the OOB repository. The Informatica version 8.6.1.
  I came across several tasks with the additional orders and support is entered as @DAC__CMD.
  Can someone let me know what it does stand?
  
  Thank you
  Anamika

  You can watch note Metalink 973191.1 ID (see below). If it is useful, please check the response accordingly.

  Cause
  The 'Source Dimension loading", has the following definition:

  -Customer DAC > Design > tasks > load in the Source Dimension > order for incremental load = "@DAC_SOURCE_DIMENSION_INCREMENTAL."

  and

  -DAC Client > Design > tasks > load in the Source Dimension > order for full load = "@DAC_SOURCE_DIMENSION_FULL."

  instead of the actual names of the Informatica workflow.

  The CAD parameter is not substituted with the appropriate values in Informatica for ETL

  This is caused by the fact that ORDERS for FULL and INCREMENTAL fields in a task of DAC are not specific texts of database as described in the following bug:

  Bug 8760212 : FULL AND INCREMENTAL ORDERS SHOULD ALLOW DB SPECIFIC TEXTS
  Solution
  This problem has been resolved after you apply the hotfix 8760212

  The documentation says to apply the Patch 8760212 to DAC 10.1.3.4.1 according to the requirements of the systems and the Guide of platforms supported for Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1.

  However, Patch 8760212 has become obsolete, recently, in this platform and language. Please see the reason mentioned below on the "Patches and update" tab on My Oracle Support.

  Reason of Obsolescence
  Use rather cumulative Patch 10052370 .

  Note: The most recent replacement of this patch is 10052370. If you download Patch 8760212 because it is a sine qua non for another patch or group of hotfixes, you must check whether or not if the Patch 10052370 is appropriate as a condition before substitute before downloading.

• Could not load the pack performance (Solaris 10)

  Hi all
  
  I had started a BEA wlss 3.1 on Solaris SPARC10 (Solaris 10 5/08 s10s_u5wos_10 SPARC). Although the wlss managed to start properly, there was an error:
  
  < 26.mar.2009 kl 18.35 THIS > < error > < Socket > < BEA-000438 > < cannot load the pack performance. Use instead of Java IO. Make sure that a native performance library is in: "/ opt/bea/sipserver31/Server/native/solaris/sparc.
  >
  
  However, all performance libraries are already there in the folder "/ opt/bea/sipserver31/Server/native/solaris/sparc.
  
  1496 total
  drwxr-xr-x 2 root root 512 12 March 15:04.
  drwxr-xr-x 3 root root 512 12 March 15:04...
  -rw - r - r - 1 root root 360304 March 12 15:04 libjmsc.so
  -rw - r - r - 1 root root 43736 March 12 15:04 libmuxer.so
  -rw - r - r - 1 root root 16720 March 12 15:04 libnodemanager.so
  -rw - r - r - 1 root root 5232 March 12 15:04 libterminalio.so
  -rw - r - r - 1 root root 16800 March 12 15:04 libweblogicunix1.so
  -rw - r - r - 1 root root 7176 March 12 15:04 libwlenv.so
  -rw - r - r - 1 root root 23000 March 12 15:04 libwlfileio2.so
  -rwxr-xr-x 1 root root 270336 March 12 15:04 wlauth
  
  Has anyone had the same problem before?
  
  Thanks for your help.
  
  Best regards
  Kirati

  I sit past with sunjdk?

  If you install the 64-bit version of the application server in Oracle Communications converged on Solaris installation package, you must add the - d64 with Sun's JDK option to specify 64-bit. If you omit option - d64, the Sun JDK automatically by default in 32-bit mode, and the installation program is unable to install the required 64-bit native libraries.

  It will be useful.

  Anurag Ballester

• After upgrading to IOS 9.1 my iPad2 crashes constantly and Safari takes more than 30 seconds for the loading of the page.  When Apple will solve these problems, given that the downgrade isn't possible?

  After that the IOS upgraded to 9.1 on my iPad 2, the unit has switched navigation performance and each app is lagging, and then crashes the device, to be hard restarts.  Changing such settings recommended in many articles does not improve these problems of performance or speed.  Given that the downgrade is possible, when Apple will release 9.2 to solve all these problems of performance?

  These are performance problems widespread in the complaints I've seen on many articles, even in this community and discussion forums.

  Uh, no.

  iPad 2 questions are far from "widespread".

  Each user who has problems with their brand of Apple devices claimed that their problems are widespread disaster.

  users of iPad 2, 3 and 4, like me, don't post troubleshooting forums if their iOS/updates updates update succeeded.

  Here are my updated list of corrections suggested for a model slow iPad 2, 3 or 4.

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

• Search for compounding and return processor &amp; Performance

  Hi all

  We must use Lookup from 2 to 5 and processors return in each of our 16 lots. A couple of batch processing about 700K records per day.

  To reduce clutter, I think create a processor research and personalized return (containing 5 processors Lookup and return and processor attribute merge at the end to combine the outputs of each processor search/return).

  In some of the processes, I can't use all the 5 research as input for the custom processor. My understanding of article - creating processors , all stages of the research will be always executed for all records even if some of the entries have the value NULL in accordance with the instruction-

  "the value of the attribute will be considered as zero in the logic of the processor.

  Can I create more than one processor for each research/back number 1 2, research/back 3, etc and use them in my process or compounding of processors will have a negligible performance impact?

  Also think about composition processors to add an attribute, believe this won 't a lot of impact on performance if I use not all entries.

  Kind regards

  Vivek

  1. research and return is generally effective in performance. If the research is external, make sure that you have indexes on columns of search.

  2. 5 searches in a batch is not uncommon.

  3 5 to put in a composed robot research is fine and will have no impact on performance.

  4. If you do not every 5 to run according to the given conditions, you can model this in your process of / processor, for example by using no. Data Check not to records of the road to one of the controls. Make sure that you join all records after passing different paths (the attributes of fusion will be this beautiful.)

  5. as you say, adding attributes will not add any significant performance overhead. What makes them in a processor made up makes no difference to performance.

• Collapsed bridge camera of conclusion for the loading of pictures.

  Collapsed bridge camera of conclusion for the loading of pictures. Good connection.  Low pictures load in 'Photos' in my iMac, but not on the bridge on the same computer.

  Have been loading photos in my Mark III Bridge. It worked automatically in the past.  Now "no device is found" works very well for pictures in the PC and iMac

  If you use Bridge CC please updated for the latest version of the CC bridge, see Adobe Bridge does not some devices on Mac OS 10.11

  Kind regards

  Assani

• Accrual accounting reconciliation executed load performance problem report.

  We have significant performance problems when you run the reconciliation of charge accumulation report run. We had to cancel after having run for a day. any idea on how to solve it?

  We had a similar question. As this report runs depends on the input parameters. Remember, your first round of what this report will take a lot of time and subsequent executions will be much shorter.

  But w had to apply the fixes mentioned in the MOS article to solve the performance issue.
  Accrual accounting reconciliation Load Run has slow performance [ID 1490578.1]

  Thank you
  MIA...

• No option for a loading screen

  I use the TCS2, Captivate 4.0.1

  I've created a demo and you want to add a loading screen. When I go into Preferences, project - I see start/end with AutoPlay and Preloader options. I see no checkbox or option for the loading screen. Help!

  I don't know that it should be there...

  Thank you

  Adriana

  Hello

  You are in the right place, but just don't realize.

  Preloader is what you are looking for.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Best practices for deferred loading collection once but ensuring there?

  I'm confused on best practices for managing the "setup" of the form, where I need a remote call to occur once only once for the form, but I also need to make use of this collection for a combobox that will change when different lines in the DataGrid or clicked. Easier if I just explain...

  1. You click on a row in a datagrid control to modify an object (for this example we will say it is an "employee")
  2. The form you go must have a collection of objects 'Department' charged by a remote call. This collection of departments should only occur once, since it is not common for them to change. The departments collection is used to fill a combobox in form.
  3. You need to understand what Department of the comboBox control is the property selectedIndex by iterating over the departments and find one that fits the employee.department.id

  Individually, I know how I can do all of the above, but because of the asynchronous nature of Flex, I'm having hard time setting up things. Here are a few questions...

  My first thought was just put the loading of the departments in an init() method on the employeeForm who would load as an event on the form creationComplete(). On the component page grid when the event handler by clicking a line of fire, I then calls the setup() method on my employeeForm which stands at which selectedIndex to set to the combobox control looking at the departments.

  The problem is the resultHandler for the load of the departments could not returned (so departments could not be there when "setUp" is called), but I can't put my business logic to determine the correct combobox in the departmentResultHandler because it would mean that I would always have whenever I don't want the fire of the call to the remote server object.

  I have to miss a single best practice? Suggestions welcome.

  Hi there rickcr

  It is pretty rough and you need to make a few storage upward, but take a look below.

  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
     
          Import mx.controls.Alert;
  Import mx.collections.ArrayCollection;
             
  private var comboData:ArrayCollection;
             
  private void Setup (): void {}
  If {(comboData)
  Alert.Show ("data are present")
  populateForm()
  } else {}
  Alert.Show ("data not '")
  getData();
  }
  }
             
  private void getData (): void {}
  comboData = new ArrayCollection();
  The result of this call, the installer again
  }
             
  private function populateForm (): void {}
  fill out your form
  }
  ]]>
     
     
     
         
         
         
         
     
  

  I think this example type of watch you want.  When you first click on tab 2 there is no data.  When you click on tab 2 once again, there is. The data for your combo will be stored in comboData.  When the component gets created first the comboData is not instansiated, just romance.  This allows you to say

  If (comboData)

  This means that if the variable contains your data, you can fill out the form.  Initially it is not so now the else condition, you can call your data and return the result of your data then you can say

  comboData = new ArrayCollection(), put the data in it and remember the installation again.  This time comboData is populayed and is so it will run the method populate the form and you can decide which selected item to affect.

  If it is on a large scale you want to look into the creation of a suitable handler class to handle this, but this simple demo shows you can test to see if the data is different.

  Hope it helps and gives you some ideas.

  Andrew

• I use iWeb for my website (use Go Daddy) but I would like to move to something different and easy even as iWeb (what you see is what you get) any suggestions?

  I use iWeb for my website (use Go Daddy) but I would like to move to something different and easy even as iWeb (what you see is what you get) any suggestions?

  Yes, why not take a look at EverWeb.  It has been designed to be very like iWeb, but with everything you wanted iWeb joined, as a form of contact, drop-down menus etc and much more.

  The layout is very similar to iWeb, and it was deliberately designed to be - have a look here EverWeb.