Financial statement for line above a certain value
Hello
How can I do for the analysis of an array of strings of x and are data and output the line containing the data exceeding a certain value. I have attached a vi that I started to work on, but don't know how to do for x and y of output data above - 80.
Any help will be greatly appreciated.
Thank you
hiNi.
LV82.
Tags: NI Software
Similar Questions
-
How to block a select statement for a table of the specified until validation line
Hello
How to block a SELECT statement for a specified row in a table until willingness to engage occure?
My procedure is part of a Stock request and if a user (X) get stock 1 piece, another user must wait for the user (Y) complete his reportoire.
So, let say my stock have 10 pencils.
When the X user starts the Stock_PLS procedure, in table Stock, line (e.g. R1) that user X should work with it, must be lock up to what the commit / rollback will appear.
procedure Stock_PLS...
Start
..
pencils: pencils-1 =;
..
End
Observation-> pencils: = 9;
This means that is a user there, run SELECT * stock of the table where rows_id = R1, SELECTION should wait the Stock_PLS started by user X will be completed (with commit or rollback) and his SELECT should return the value 9.
What I need, is that Oracle has something like LINE EXCLUSIVE TABLE LOCK, but in my situation the SELECT statement should be denied on the specified lines, until the end of the procedure.
Kind regards
MichaelHello
You can achieve this using the update with the Select clause.
You can write your select statement like this
SELECT * from stock of the table where rows_id = R1 for update; -
State of color lines based on a value in the same row
I would like to color report lines based on a value in the same row.
For bolting with the table 'EMP ':
I would like job = MANAGER and Red work = CLERK to be green etc etc.
The other example I found was the possibility of a single color either the nail or the default color.
I'm looking for a way to do multiple colors.Hello
In the model line, you can use #1 #, 2 # #, etc. to indicate where a field in the report should be released. It doesn't have to be clear - that is to say, you can use it in style tags if you wish.
So take a query such as:
SELECT EMPNO, ENAME, DEPTNO, DECODE(DEPTNO, 10, 'green', 20, 'red', 30, 'cyan', 'white') BG_COLOUR FROM EMP
You get the column 1 = empno, 2 = ename, 3 = deptno and 4 = bg_colour. In the model line, you can then do:
Before defining lines (implements the table):
<table> <tr><td>ID</td><td>Name</td><td>Dept</td></tr>
After setting (farm table) lines:
</table>
Model 1 (used for all lines) line:
<tr style="background-color:#4#;"><td>#1#</td><td>#2#</td><td>#3#</td></tr>
Then, for each row, the color that has been calculated by using the DECODE function is used in the style tag for color the background of the whole line.
How to determine the colors, it's you. I used DECODE here, but you can use a field on the DEPT table to hold and use it in your SQL statement.
Andy
-
Hello
I have setup a COM interface for TestStand (TS) to run some scripts in TestComplete (TC). Normally, when TestComplete has finished executing the script, it returns a 0 or 1 to designate the success/failure during the TestStand step (step test for example String value). It worked well.
However, now I need TestComplete to regain a vaule (e.g. 32) TS and TS need to assess this value in a while statement. So if the TC value is 32, I would have some statement in TS ike:
While (return value! = 30)
Do something...
Thank you
Jigg,
No, the program does not have a new thread. It's just a single sequential thread. She called other sequential files, and that's all.
I think I'll have some luck with the StationGlobal. It seems to work (for example by setting the StationGlobal a single sequence file automatically updates the Stationglobal in another movie file, sort of like passing the reference value)
Thank you!
-
I use JDev 12 c on Windows 7 Pro
I do a CreateInsert in ADF button on af:table. The model is set up so that T1 is one to many with t2, t2 is one to many with t3.
I have recordings in t1 and t2, and trying to insert a record into t3.
After I click the button, two of the three PK columns have values of t2. The third column is served by LOV. I open the LOV and select a value, and I get this exception:
oracle.jbo.InvalidOperException: Houston-34014: no child node not found for line with key:oracle.jbo.Key [79449 Xnnnn-nn-X-nnnn null] under parent node: root
at oracle.jbo.uicli.binding.JUCtrlHierBinding.bringNodeToRangeKeyPath(JUCtrlHierBinding.java:875)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding.bringNodeToRangeKeyPath(FacesCtrlHierBinding.java:121)
at oracle.adfinternal.view.faces.model.binding.RowDataManager.setRowKey(RowDataManager.java:131)
to oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$ FacesModel.setRowKey (FacesCtrlHierBinding.java:951)
at org.apache.myfaces.trinidad.component.UIXCollection.setRowKey(UIXCollection.java:553)
at org.apache.myfaces.trinidad.component.UIXTable.setRowKey(UIXTable.java:768)
at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:188)
more of the stack trace was stopped for brevity.
I've seen other posts related to this exception but no solid answers. I tried a few suggestions but nothing worked.
If I remove the 3rd key I can insert a line, but on the second row, I get an error indicating that the primary key violation. It's like the page checks the constraints of the entity before the validation.
Insert in this table works fine in the tester model.
Thank you
Dave
And by LOV you mean: af:inputListOfValues?
It usually works within the af: table if you VO with composite key.
Maybe you can set ChangeEventPolicy = none on your iterator, but it will probably not help.
Dario
-
Essbase Warning (1023135) skip certain values for the replication
Hello
When you replicate the complete data of a partition Essbase BSO in Essbase ASO (11.1.2.2),
thousands of warning messages are logged in the application log:
"Warning (1023135) skip certain values for the replication.
The partition (data of level 0) valid and the counties of cells in each area are exactly.
No idea of the possible causes and consequences?
Thanks for your help.
Philippe CuissetHello
Thanks to the contributors.
The contours of the source and the corresponding target, with the exception of 3 members with different names in the source and target.
My score has 2 spaces for these 3 members. Mapping advanced between the names of source and target members has been set in a field, but it was missing in the other (not detected by the validation of the partition!). I don't set it too and now no more warnings.Philippe Cuisset
-
I have a microsoft wireless 4000 keyboard when I try to use the question mark I get / can you tell me how to fix
or what is the problem, I received an e with a line above.
Hello
1. what was your keyboard last working fine?
2. you remember to make changes on your computer recently?Try the steps and mark for the question below.a. click the Start button, type region and language and press ENTER.
b. click the keyboards and languages tab.
c. click Change keyboards.
d. in the pop-up window, click Legeneralonglet.
e. under default input language, select English (United States) - US or any another language you use generally.
f. click on the OK button.
g. click OK button region and language.I hope this helps.Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Stats for taking the time to gather
All,
Below is a procedure of stats to gather allows us to collect statistics. Y at - it no changes to settings that can be done to optimize this?
CREATE OR REPLACE PROCEDURE PRESTG . SP_PRESTG_GATHER_TBL_STATS ()schema_name VARCHAR2()
AUTHID CURRENT_USER
AS
type of typ_tbl is table of VARCHAR2 (30)
index of by PLS_INTEGER;
typ_tbl tbl ;
IDX typ_tbl ;
n NOMBRE (10):= 0 ;
BEGIN
run immediate "SELECT table_name FROM prestg_tbl_xref" In BULK COLLECTION of in tbl ;
n : = SQL % Number of LINES;
dbms_output.put_line (n);
IF n > 0 THEN
FOR i IN tbl . First... tbl . Last
LOOP
RUN immediate ' start sys.dbms_stats.gather_table_stats (ownname = > "'| schema_name | ) "', tabname = >" ' || tbl (i) || "', block_sample = > TRUE); END;' ;
END LOOP;
ON THE OTHER
raise_application_error (-20001,'No Tables');
END IF;
run immediate ' select index_name all_indexes where owner = "' | schema_name | "' and table_name in
(SELECT table_name FROM prestg_tbl_xref)' in bulk collection of in idx ;
n : = SQL % Number of LINES;
IF n > 0 THEN
FOR i IN idx . First... idx . Last
LOOP
RUN immediate ' start sys.dbms_stats.gather_index_stats (ownname = > "'| schema_name | ) "', indname = >" ' || idx (i) || '''); END;' ;
END LOOP;
END IF;
END SP_PRESTG_GATHER_TBL_STATS ;
/
Kind regards
Narayan
Once you get a version well beyond the default stats collection, it becomes dependent on how you query the data and what you are. If you have a limited number of queries with a limited number of bind values sent in the settings, this might be different from that of a DSS system with all sorts of strange requests, which could still be different analytical system where the full score scans are the norm. The version determines what options you have to stabilize the query plans.
If you have good plans generated for lots of data which by default would be stale anyway, you might consider importing a standard set of stats for these data. If you have keys to index constantly growing you can always generate 100%. It depends on.
-
With the help of case condition for the date of distinct values is does not
Hello PL/SQL gurus and experts.
I use Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64-bit Production version
I followed two tables
TT3-
TT4create table TT3(FeesCntlr,CommCntlr,LatePayCntlr,Name,Age) as select 1,11,21,'Mike',25 from dual union all select 2,12,22,'Clark',26 from dual union all select 4,17,27,'Ussan',28 from dual union all select 5,13,21,'Linda',29 from dual union all select 6,14,24,'Obrek',35 from dual union all select 7,15,25,'Batty',45 from dual union all select 8,16,26,'Nicky',38 from dual;
Now, if I use the following DML for the year 2012, then the result is as follows-drop table TT4; create table TT4(TRNID,BlockID,FeesCntlr,CommCntlr,LatePayCntlr,BookDate) as select 221,625,1,11,21,20121101 from dual union all select 223,625,2,12,22,20121101 from dual union all select 224,625,1,11,21,20121101 from dual union all select 225,627,4,17,27,20111001 from dual union all select 226,628,5,13,21,20120701 from dual union all select 227,628,6,14,24,20120701 from dual union all select 334,628,7,15,25,20120701 from dual union all select 339,629,8,16,26,20120701 from dual union all select 393,629,1,11,21,20120701 from dual union all select 432,629,2,12,22,20120701 from dual union all select 347,629,1,11,21,20120701 from dual union all select 556,629,4,17,27,20120701 from dual union all select 558,629,5,13,21,20120701 from dual union all select 974,629,6,14,24,20120701 from dual union all select 976,629,7,15,25,20120701 from dual union all select 980,629,8,16,26,20120701 from dual union all select 1223,650,2,12,22,20110415 from dual union all select 1224,650,1,11,21,20110415 from dual union all select 1225,650,4,17,27,20110415 from dual union all select 1226,650,5,13,21,20110415 from dual union all select 1227,650,6,14,24,20110415 from dual union all select 1334,650,7,15,25,20110415 from dual union all select 1339,710,8,16,26,20120115 from dual union all select 1393,710,1,11,21,20120115 from dual union all select 1432,710,2,12,22,20120115 from dual union all select 1347,710,1,11,21,20120115 from dual union all select 1556,710,4,17,27,20120115 from dual union all select 1558,711,5,13,21,20111231 from dual union all select 1974,711,6,14,24,20111231 from dual union all select 1976,711,7,15,25,20111231 from dual ;
Now, if I use the following DML for 2011, then the result is as follows-SQL> select t3.Name,t3.age,count(t4.TRNID),count(distinct(BlockID)) from 2 tt3 t3,tt4 t4 3 WHERE t3.feescntlr = t4.feescntlr 4 AND t3.commcntlr = t4.commcntlr 5 AND t3.latepaycntlr = t4.latepaycntlr 6 AND t4.bookdate between 20120101 and 20121120 7 GROUP BY t3.name, t3.age; NAME AGE COUNT(T4.TRNID) COUNT(DISTINCT(BLOCKID)) ----- ---------- --------------- ------------------------ Mike 25 12 3 Mike 27 12 3 Batty 45 4 2 Clark 26 6 3 Linda 29 4 2 Nicky 38 6 2 Obrek 35 4 2 Ussan 28 4 2 8 rows selected.
But by using the condition if I use the following dml and results do not match-SQL> select t3.Name,t3.age,count(t4.TRNID),count(distinct(BlockID)) from 2 tt3 t3,tt4 t4 3 WHERE t3.feescntlr = t4.feescntlr 4 AND t3.commcntlr = t4.commcntlr 5 AND t3.latepaycntlr = t4.latepaycntlr 6 AND t4.bookdate between 20110101 and 20111120 7 GROUP BY t3.name, t3.age; NAME AGE COUNT(T4.TRNID) COUNT(DISTINCT(BLOCKID)) ----- ---------- --------------- ------------------------ Mike 25 2 1 Mike 27 2 1 Batty 45 2 1 Clark 26 2 1 Linda 29 2 1 Obrek 35 2 1 Ussan 28 4 2 7 rows selected.
As the expected output, that I expect - isSQL> select Name,Age,sum(Trn),sum(CurYrOrdr) "2011 Order", sum(LastYrOrdr) "2012 Order" 2 from 3 ( 4 select t3.Name,t3.age,count(t4.TRNID) Trn,(case when t4.bookdate between 20110101 and 20111231 then count (distinct(BlockID)) else 0 end) CurYrOrdr, 5 (case when t4.bookdate between 20120101 and 20121120 then count (distinct(BlockID)) else 0 end) LastYrOrdr 6 from 7 tt3 t3,tt4 t4 8 WHERE t3.feescntlr = t4.feescntlr 9 AND t3.commcntlr = t4.commcntlr 10 AND t3.latepaycntlr = t4.latepaycntlr 11 AND t4.bookdate between 20110101 and 20121120 12 GROUP BY t3.name, t3.age,t4.bookdate 13 ) 14 group by Name,Age order by Name,Age; NAME AGE SUM(TRN) 2011 Order 2012 Order ----- ---------- ---------- ---------- ---------- Batty 45 8 2 2 Clark 26 8 1 3 Linda 29 8 2 2 Mike 25 14 1 3 Mike 27 14 1 3 Nicky 38 6 0 2 Obrek 35 8 2 2 Ussan 28 8 2 2 8 rows selected.
I sincerely thank each of you in advance for the input/comments that I fight with it for some time now.---------------------------------- Expected Output - NAME AGE "2012 TRNID" "2011 TRNID" "2012 ORDERID" "2011 ORDERID" ----- ---------- --------------- ----------------------------- ---------- ------------ Mike 25 12 2 3 1 Mike 27 12 2 3 1 Batty 45 4 2 2 1 Clark 26 6 2 3 1 Linda 29 4 2 2 1 Nicky 38 6 2 2 1 Obrek 35 4 2 2 1 Ussan 28 4 4 2 2
Kindly help.user555994 wrote:
Hi JAC
Thanks for the comments and certainly once I comment out the following line.
- AND t4.bookdate between 20110101 and 20111120then the values are adapting, but at the same time why do we need to comment the date range condition as case is just a filter and not the condition.
filter should be-
AND t4.bookdate between 20110101 and 20121120 --"made it 12"
-
Hello
I have the following table:
create the table pp_status (ppid number (10), ppdescr varchar2 (20),)
(1) number, varchar2 (4)) bordered;
The ppid is the primary key.
where: the ppid Gets the values of a sequence, status may have values (0, 1, 2) and bordered of... years.
Thus, some values of line may be as follows:
insert into pp_status values(1,'XX',0,'2009');
insert into pp_status values(2,'XXY',0,'2010');
insert into pp_status values(3,'XXT',1,'2009');
.....
Now, I want to impose a business rule in which declaratively:
If and only if both lines have values of shell (as in row 1, 3 in the example above lines) but different data values in the neck of status (and specifically the values 0 and 1 (not 2), as in the lines of the sample 1 and 3) then the second row (that is, the third row in the whole of the sample) is permitted , otherwise not. For example, the following lines:
insert into pp_status values(3,'XXT',2,'2009'); {because of the whole first line was inserted}
insert into pp_status values(3,'XXT',0,'2009'); {because of the whole first line was inserted}
should not be allowed...
Is it possible to achieve without writing code... I mean the declaratively.
Note: I use DB10g v.2
Thank you
SIMSIM,
It's an interesting challenge, which requires two unique indexes to solve declaratively:
SQL> create table pp_status(ppid number(10),ppdescr varchar2(20), 2 status number(1) check (status in (0,1,2)),firstyear varchar2(4)); Tabel is aangemaakt. SQL> create unique index ui1 on pp_status (firstyear,decode(status,2,0,status)) 2 / Index is aangemaakt. SQL> create unique index ui2 on pp_status (firstyear,decode(status,2,1,status)) 2 / Index is aangemaakt. SQL> insert into pp_status values(1,'XX',0,'2009'); 1 rij is aangemaakt. SQL> insert into pp_status values(2,'XXY',0,'2010'); 1 rij is aangemaakt. SQL> commit 2 / Commit is voltooid. SQL> insert into pp_status values(3,'XXT',2,'2009'); insert into pp_status values(3,'XXT',2,'2009') * FOUT in regel 1: .ORA-00001: Schending van UNIQUE-beperking (RWIJK.UI1). SQL> insert into pp_status values(3,'XXT',0,'2009'); insert into pp_status values(3,'XXT',0,'2009') * FOUT in regel 1: .ORA-00001: Schending van UNIQUE-beperking (RWIJK.UI1). SQL> insert into pp_status values(3,'XXT',1,'2009'); 1 rij is aangemaakt.
Kind regards
Rob.PS: why the hell proclaim the year varchar2 (4) instead of number 4?
-
How to put the line above the footer area?
In Microsoft Word, it is very intuitive.
But for the Page, even an engineer has trouble understanding...
Anyone?
Engineer, I expect you to be more explicit about the version of OS X and Pages you are currently using. Because not specifying these means to guess between several requests for Pages and their behavior, I offer a current solution for v5.6.1 Pages.
It is possible to place a line above your footer of document, but it is not automated.
- In the display of Pages menu, select display layout. Now, you have a fixed footer visible.
- Click on the Forms toolbar item and choose the regular line segment.
- It will go down in your selected document plan. The right Format Panel now displays the tabs Style and suits. Click on the latter and text wrapping set to None.
- You can click on each end of the segment of the line and turn it to 0 °, or use the rotation dial in tab reorder. You can also directly enter the 0 ° in the Angle box.
- Above and repeating your line segment to the width of your footer and in the Style tab, positioned the segment thickness line and color to your liking.
- With the selected line segment, visit the menu arrange: Section Masters: move Section Master object.
- Now, this line above your footer will appear on each page of your current section. It is a background object and is not editable, except if you select the menu arrange: Section Masters: make Master objects selectable.
-
Does anyone know how to put a bar above a certain number?
I need to insert a small bar above a certain number, which indicates a negative value in a system of coordination. Does anyone know how to do?
Thank you!
In Pages, type your number. Select the Edit menu: Emoji & symbols. This will launch the character Panel. In the search table, type "combining macron" without the quotes. The first character to appear on the central display is the macron combining. Your insertion point is always behind the number (or letter) that you typed, click twice on the macron combining symbol in the Middle character Panel. The number will instantly receive a macron (bar) above him.
-
I have the latest version of OS X and numbers. I followed the instructions for line alternating colors but numbers using just the color or shade that was in the previous row. I'm puzzled!
Select the table, then select all of the cells, then open cell formatter and make sure that the filling is not activate. Look at the lower right of each of the screenshots.
Cell fill color, White value, then no other line if on same shading in Table formatter:
Fill color set to "No fill" of cells, shading line replacement is now visible:
-
change a State of buttons based on another value of buttons
do not remember how to change a State of buttons depending on the value of another button.
I think it was a structure of the event?
can someone point out an example?
Thank you
There are several elements to your question:
In response to a status change button: this can be done with either a structure of the event in a loop, or by querying the button in the loop. Examples are provided with LabVIEW on the use of the structures of the event.
Changing the value of another button: this can be done with either a local variable or a "Value" property node (Cue the crowd of local variables at this stage.). Note that the lock of your button action will affect if you can do it. See this article for more information: why is my property a Boolean node a Variant?
-
can how I stop letter from 1 to another or Word in the line above or below the line as I type
When typing the characters of the jumps in other words words, back at the beginning of the line when I have finished typing to the end of the line, or in the line above or below the typing and I must keep my typing.
Hello
Check with the manufacturer of system support, documentation in line, or forums as there probably
are shortcut keys that enable and disable the touchpad functions.Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.==========================================
If necessary: (make sure that you have restarted at least once, if the above did not work)
Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
(drivers), now right CLICK on the touchpad and UNINSTALL.Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
RESETThis will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
of work.The similar procedure on XP, Windows 7 and Vista is the same, except that we must
Clear the specific device if present.
http://support.Microsoft.com/kb/310575Then go to the system manufacturer's website and get the latest touchpad drivers.
Download - SAVE - go to where you put it-click on - RUN AS ADMIN.
==========================================
This utility also allows to control the TouchPad:
TouchFreeze
http://code.Google.com/p/TouchFreeze/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
Satellite click Mini L9W - b: Touchpad is reversed in Windows 10
Hello I've updated my Mini click for Windows 10. I encountered a problem where sometimes my touchpad does not work correctly. Rather than make the pointer up and down when you are prompted, the pointer will go left and right. When you perform the mov
-
Hello In my Yoga pro 2, Intel wireless-n 7260 chip is hardware disabled when using linux. I checked with fedora, ubuntu and suse. The release of "rfkill list" is always the same: 0: ideapad_wlan: wireless network Soft blocked: no Hard blocked: Yes .
-
Windows does not run in a reboot loop
-
I just bought a new HP Pavilion pc model: P6 - 2220t is: Windows 7 Home Edition and my question is, How to clone my entire hard drive, including the recovery on a larger hard drive partition? elcoppo
-
What is the number of attempts to "Auto-connect" in MSDS.
Hello I would like to know, how many times a TMS would attempt a point of termination/MCU while trying to send shout information - before you say 'Allocate failed, the Conference is not automatically connected. The type of conference is auto connect