Find cell that caused the event change of value on table

Similar Questions

• When Firefox crashes and restart is necessary, Firefox always try to open the same tabs that caused the failure before.

  I use tabbed browsing all the time. When I open a tab of a Web site that poses a problem, freezing Firefox (but not the computer), I find that I can delete the Firefox problem only by restarting the computer. I am so appalled to find that Firefox then tries to recreate the same set of tabs that caused the problem in the first place, causing Firefox freeze again. Usually I can get it out by closing Firefox and very long wait for Firefox to close completely so that it can be restarted again.

  This problem occurs in version 4.0 as well as in the latest version of 3 that I had. I remember that in some versions previous Firefox asks if you want to recreate your tabs or open in a new browser window. I always took the second option. This choice is no longer makes its appearance.

  Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about: config to get page the on: sessionrestore page immediately with the first reboot after a failure has occurred or the Task Manager was used for the closing of Firefox.

  Which allows to deselect the tabs that you do not want to reopen, but will reopen the other tabs.
  
  See:

  • http://KB.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen

  I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen randomly with the screen turned on (I mean everything is black and I can't see a thing, but can still see the light of the LCD screen). This often happens when I open/close a window, browsers web example, the records, or even during the boot. I want to know how to solve this problem and if the upgrade to Windows 10 works for her.

  Hi Haolin,

  Thanks for posting your query in Microsoft Community.

  I do not understand that the screen goes black randomly, and I'll be happy to answer your query. Let me ask you;

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time it worked?

  Video card problems are the most common cause of this problem.

  Try the following troubleshooting procedures in the order. If the steps described in the first procedure does not resolve the problem, continue to the next procedure.

  Step 1: Reinstall your video driver

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click file, and then click new task (run).

  4. In the text box open, type explorer.exe, and then click OK.

  5. Click on the Start button , go into the Device Manager in the start search box, and then, in the search results, click on the peripheral Manager.

  6. Double-click on display the cards, right click the display device, click Update driver software, and then follow the steps in the wizard that appears. You can also visit the website of the manufacturer of the computer support and install the latest available graphics cards for the same model of computer you have.

  Note: After the driver is re-installed, you may need to restart your computer to complete the installation. You may also need to adjust the resolution of the display to its previous value. For more information, see change your screen resolution.

  Step 2: Search for registry problems

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click fileand then click new task (run)

     In the text box open, type explorer.exe, and then click OK.

  4. Click on the Start button , type regedit in the search box, and then, in the search results, click on regedit.exe.

  5. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  6. Click to select the WinLogon key and then in the right pane, click on Shell. The value of shell in the data column must be explorer.exe. If the value of Shell is not explorer.exe, double-click Shell, and then, in the value data text box, type explorer.exe, and then click OK.

  7. Close the registry editor and restart your PC.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  If this procedure resolves the issue, you are finished. If this is not the case, proceed to the next set of steps.

  Step 3: Start the computer in safe mode and run system restore

  1. Click on the Start button , click the arrow next to Shut Down, and then click restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. In the Advanced Boot Options screen, use the arrow keys to select Safe Mode, and then press enter.

  4. Log your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

  5. Click on the Start button , type "System Restore" in the search box, click System Restore, and then click Next. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. Choose a restore point when your PC worked as expected, click Next, and then click Finish.

  7. Restart your computer normally.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  If these steps resolve the issue, you are finished. If not, try to repeat the steps and chooses an older restore point (if available). If that does not resolve the problem, contact your computer manufacturer or the technical support for further assistance.

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Cell that contains the formula paste between spreadsheets

  How do I paste the value of a cell that contains the result of a spreadsheet formula has, in a worksheet cell B and still have the operation of the formula? OS 10.11.14, numbers 3.6.1.

  Hi dad,

  It depends on what you mean by "still have the operation of the formula."

  If simply paste you it into a new table in another document, the formula will be stuck more or less intact, but it will not reference all the cells on the original table. If he refers only the cells on the table where he came from, he can refer to these same cells or cells in the same position relative to the new location on the table to which it is glued. You will have probably the best success with her work on the new table, if you copy and then paste the formula itself, rather than the containing cell.

  Repeat what I have not quite clear in the first line: the numbers documents cannot reference cells in other documents of numbers.

  Kind regards

  Barry

• How to create a formula that highlights the cell that contains the same data that I type in another cell

  Hi, can someone help me make a formula which detects and highlights the value of the cell that contains the items of data that I entered in another cell? Thank you

  resolved to myself

• What shared variable caused the event?

  Hello

  I save the shared variables to trigger the event (see attached photo). How is it possible to detect which shared variable triggered the event, but not analysis of chain of the shared Variable in the terminal dynamic event of the structure of the event?

  Thank you.

  Hello Martin,

  Looks like you have access to the shared variable that raises the event, take a look at the photo in the following link:

  https://decibel.NI.com/content/docs/doc-4375

  Michel

• My pages to scroll. I have the items pinned to the top left, that causes the problem?

  My pages to scroll. I have the items pinned to the top left, that causes the problem?

  I thought about it. I had to UN-pin of each element, let them float. Thanks for your reply.

• Buttons that cause the window to close in IE8

  Hello

  I have a weird bug that seems like it should not be possible.  I use 6 Captivate and SCORM 2004 edition as a .swf.

  I created a presentation of captivate with several software simulations incorporated in it as animations.

  The slides containing these simulations are break through a mostly empty widget hidden behind the animation.

  Each simulation starts with a button start this progress simply to the next slide and ends with a button continue with a javascript function that moves the presentation of the parent to the next slide.  That javascript is:

  function nextSlide() {}

  var objCP = document. Captivate;

  objCP.cpEISetValue ('rdcmndNextSlide', 1);

  }

  nextSlide();

  Each of the six software simulations has the Start button and keep even that was copied and pasted from the first.

  All works perfectly in Chrome, except that JavaScript works only when the project is published on the LMS.

  However, in IE8, I encountered a very strange problem.  Some buttons work as expected, but a few of them cause the window IE8 containing the presentation to close without warning or error.  Non-working buttons remain consistent and continue to have problems even after many republishings, and even after recreate both the buttons and the slides containing simulations.

  When I run it locally, he throws the following errors when I click on one of the buttons to bad:

  49:Wed July 3, 10:44:06 EDT 2013 - unloading

  50:Wed July 3, 10:44:06 EDT 2013 - ClearErrorInfo

  51:Wed July 3, 10:44:06 EDT 2013 - ExecFinish, ExiType = SUSPEND

  52:Wed July 3, 10:44:06 EDT 2013 - ClearErrorInfo

  Anyone has any ideas on this?

  Thank you

  Brian

  Looks like you hit the JavaScript bug found here:

  http://captivatedev.com/2012/12/17/display-the-students-name-from-your-LMS-using-Adobe-cap market-6-x.

  and more info here:

  http://www.cpguru.com/fix-for-the-Adobe-Captivate-6-JavaScript-bug/

  This problem has been resolved in Cp 7.0.  What version do you use?

• Step that caused the UUT to Fail

  Hello

  Can someone tell me if TestStand stores step which caused the UUT to fail anywhere which is easily accessible in the loop of PostUUT?

  Thank you best regards &,.

  Shane.

  Hi Shane,

  It is under Parameters.Step.Name in the SequenceFailPostStepFailure callback.

• How to capture the event of selection of a table on the side line client (JavaScript)

  The example is:
  < af:table >
  < af:column >
  < af:outputText... >
  < af:clientListener... / >
  < /... >
  < /... >
  
  However, the text does not fill to the top of the cell. So, if I click on the on the empty area, the event handler is not called.
  I hope, even if I click on the empty area of the line, the event handler will be called.
  In fact, if I click on a row of a table at any location, including the empty area, the line becomes blue. How to capture this select event row on the client side?

  You can try file the client listener as a child under tag instead of the ?

  
  ...
  
  
  
  

  The above code should call a function in your js file called "handleTableDoubleClick", which, in turn, queued a ClientEvent that can be attached to a Backing Bean method. Something like:

  ...
      public void handleTableDoubleClick(ClientEvent ce) {
         //do something when the table is double clicked.
      }
  ...
  

  hope that helps

• Running query when the display changes of value of box

  Hello everyone, I have a little problem. In my form, I have 2 rematch, the first will contain only a display element that is filled with a lov when a user presses a button. The second poster datablock a list of items that should be queried depends on the value of the LOV above. What I thought I could do are on a trigger after change of the displayed element is:
  
  go_block ('block_name');
  do_key ('execute_query');
  
  However, I am told that I can't do these in a trigger of change, someone would have suggestions on how to get what I'm looking for. I should maybe create my own trigger somehow or is their most simple way.
  
  Thank you
  
  
  
  
  
  
  
  
  
  
  I have 1 datablock consisting of 1 single view point which is filled when a user presses a button that displays in turn a LOV for the user to select a value of. When the value of the displayed item changes,
  
  Published by: 786733 on August 24, 2010 01:28

  Hello

  Try to use the KEY-LISTVAL trigger in the element where the lov is attached. Something like that...

  LIST_VALUES;
  IF :item_name IS NOT NULL THEN  -- Here item_name is where the LOV will return value.
    GO_BLOCK('block_name');
    EXECUTE_QUERY;
  END IF;
  

  -Clément

• the display of ssize_t value in table cell

  Hello

  I want to display a number of type ssize_t in a digital table cell. In the user interface editor, the cell has been set to intptr_t.

  Runs the code in debug64 works fine, in debugging I get the error message:

  FATAL RUN - TIME ERROR: Invalid argument type: found "int", "__int64" expected.

  I have to add: in the user interface editor, I created the table with one row only, I have add as many rows programmatically using InsertTableRows (but the cell types need to be inherited). The error appears when filling out the cell in the last row.

  Ideas?

  
  

• Is there a virus that causes the "cannot find server" message for any website?

  Having had no problem at all with firefox, after that my brother found himself on a "questionable" site that has closed the browser suddenly, any time I opened my browser to look at any page on my home pc I got the message 'server not found '. My laptop and phone are sailing very well without any problems. Thanks for your help.

  Make a check of malware with a few programs to scan for malware.
  You must use all of the programs, because each detect different malware.
  Make sure you update each program to get the latest version before doing a scan.

  http://housecall.trendmicro.com/ - Trendmicro online

  http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware

  http://www.superantispyware.com/ - SuperAntispyware

  http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free

  http://www.Microsoft.com/Windows/antivirus-partners/Windows-XP.aspx

  See also for a rootkit TDSSKiller infection.

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Thanks again

• While working in the Live moving photos to a new folder Photo Gallery, I changed accidentally something that caused the list of folders to the left of the screen to disappear

  Also not remain the main toolbar that appears when you click HOME. The entire screen is taken up with the pictures, and I can't continue what has been a simple exercise of copy and paste into a new folder as it is no longer listed. Nothing I've tried will return the screen that I served.

  Also not remain the main toolbar that appears when you click HOME. The entire screen is taken up with the pictures, and I can't continue what has been a simple exercise of copy and paste into a new folder as it is no longer listed. Nothing I've tried will return the screen that I served.

  Hello

  Move the cursor of the mouse on the left side of the window. You will see a line from the top to the bottom of the screen. There is a blue arrow in the center of the line. You can click on the blue arrow or drag the line to the right to view the Navigation pane with files.

  For the Ribbon toolbar, look on the left side of the title bar where it shows the Windows Photo Gallery. Click on the arrow down on the Quick Access toolbar and remove the check mark to reduce to a minimum the Ribbon option.

  Concerning