Find colors to the screen/system

Similar Questions

• Satellite L300 - I do not have 32-bit colors on the screen

  Hi all

  I just bought a new laptop Toshiba Satellite L300 and after Vista initial installation it doesn t show the colors of the screen properly. I set up the resolution, but also the 32-bit color, but on the screen, it shows just something like 256 colors.

  Everyone he knew similar, any idea where I should look like or change something to have own 32-bit colors.

  Thanks Zeljko

  Hello

  To be honest, it's really strange.
  What you could do is to repeat the HARD drive recovery.

  Turn on the laptop, press the F8 key and choose fix my computer.
  Then choose Toshiba Recovery and you start the resettlement process.

  The laptop must be set to the factory settings, and you can check if the display problem would persist.

  Good bye

• Satellite L850D - lines of color on the screen of the BIOS

  Hello

  I have a q L850D-12 (PSKGAE) and sometimes when I try to boot in the BIOS by pressing F2, I get vertical and horizontal lines and colorful on the screen some time, I get a beep sound while its weight this and other times I just get the line that I usually remove the battery and put it again and it will enter the bios setup.

  Any ideas what the cause?

  It s just an idea, but maybe it s a graphics card problem.
  In your case, I would ask the authorized Toshiba maintainer for the verification of the material.
  It is best to do while the laptop is always protected by the guarantee.

• background color: I want to change the background color of the screen of the monitor

  I have a web image in my Office I want to change the background color of the screen of the monitor without a change in the office itself

  could you let me know how to do this?

  Thank you

  I have a web image in my Office I want to change the background color of the screen of the monitor without a change in the office itself

  could you let me know how to do this?

  Thank you

  Hello

  To change the color of the desktop background, follow these steps.

  Click on the desktop and select personalize.

  At the bottom of the window, select the color of the window.

  In the next window, select the Advanced appearance settings.

  In the element , select Office.

  Click the drop-down color 1 menu and select your favorite color. ClickApply/OK.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How can I change the color of the screen on the websites?

  While ' messing around ' in the center of control & with stuff I know nothing about, (Duh...). I changed the color of the screen on the sites I visit, to green color. This makes the text in blue on the screen of the site impossible lo read, especially on the areas where they are needed to fill the void. Thank you for your time & expertise!

  I'm not sure I'm 100 percent, but you hear hyperlinks?

  If so,

  The "Windows color and appearance" window should open.

  Under "Item" click "hyperlink."

  Is that what you changed?

  If his watch as green, change it to blue and press [OK].

  If it isn't, press [Cancel].

  If it's not her, can give you a more precise description or maybe after a screenshot of the problem (without giving personal data address / email etc.).

  Note: Depending on the browser you are using, its possible to change the colors in the browser itself. For example with Firefox - FireFox Menu, Options, content, [color], will reach same choice specific to Firefox.

• Setting the background color of the screen

  Hai...

  When my application running in the Simulator, it shows only a small portion with the bgcolor that I gave in the html file. I think that the bgcolor simply encapsulates html content. So, what should I do to view the entire screen with the bgcolor.

  The problem is that in WebWorks (which uses a control called BrowserField) to view the content, the size of the display of web pages grows to the size of the content in your HTML code.

  So if height of your HTML below the screen, it will show the background color of the screen.

  To change this, you can set the window of the display using tags or set the height of the body to the size of the screen.

• To get the background and foreground color of the screen title

  Currently the title screen background color is black, and foreground color is white.

  But when we use custom theme then it can have different background and foreground colors.

  That's why I need to pick up the color of the screen title properties.

  How can I achieve this?

  Thank you

  I think you want to color your application according to the background and foreground color! Override the paint of the main method and use instance graphics for call getColor () and getBackgroundColor ()... Save it to integer variables and use it anywhere where you need...

  See you soon...

• Windows 7 system restore is impedes on the screen "system restore is initializing.

  Thanks for the response back...

  I was excited to your idea to check services and services to load... I didn't know about services of dependant' for the Volume Shadow Copy service and windows backup services... I check them and the services required and dependent services are all started and running...

  There is no error all messages when the system restore runs... it's just not always... (Even running overnight).    When I eventually give up and reboot the pc, I get an error message that the system restore did not complete...

  FYI... my device manager also shows as being very well... and I gave you on a previous message in the event log errors...

  Thank you for all this help and information... even if I have not fixed my problem, I've learned a lot about Windows 7...     :-)

  Bill

  I have a very similar problem with a Windows7 Ultimate x 64 system.

  Services run, my drive is ok, I have a lot of space (> 10 GB), I suffer from any other anomaly/Windows error, but the system restore will not end but freezes on the screen "system restore is initializing. The event log is not shine any light on this because the last event in the newspaper it is that the event log service was stopped, some hang up after the fact and did not get connected.
  Even system restore seems to work, there is a lot of activity of the disk for 5-10 minutes, then the disk activity stops and then the system just rest it seems doing nothing, rather than the SR. I have no problems to paralyze this system there may be something that simple.  Running in Mode safe is without help.
  I ran SFC/scannow in Windows (3 times in fact) but this does not help, either.

• My colors to the screen have changed - how can I change them back?

  My child was able to change the color of the screen on my Dell desktop computer. When I go to Word, the screen is black and the letters are white. I need to redefine white with black letters. Can someone help me with this problem?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a query.

  I would like to know some information.

  1. Are you facing this problem with Word?

  I suggest to refer to the Microsoft Articles help below and try the steps.

  http://Windows.Microsoft.com/en-GB/Windows-8/get-best-display-monitor

  http://Windows.Microsoft.com/en-us/Windows-8/personalize-PC-Tutorial

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Changes in color of the screen when I launch the bridge, as if change ICC profile

  I use the native lcd profile on my macbook Pro 17 "under Yosemite 10.10.5.

  For the moment, I launch Bridge (CS5) my screen changes as if I would change to a profile as "adobe RGB (1998)" (blue gray)

  While the bridge is open, it remains the same at all levels, wathever if I'm in the finder or another application, when I leave it turns its back to normal.

  If I try to edit profile in the meantime Bridge is open simply rotate yet more blue if I select another profile as "adobe RGB (1998).

  He returned to normal when quiting greys Bridge. I run it with the hold option key and clean all cache and prefs, but it does not help

  I did fix the permission and clean most of the system and other caches, not useful either.

  This does not happen with photoshop CS5 or other adobe applications.

  He has even changed during an attempt of "extensions Manager" and select bridge to install (not to open deck), when clicking back on photoshop b.e.the screen made it back to normal.

  Where is the bug?

  Thank you ~ Mohit,

  but this isn't because of the calibration. He gets as a 'blue layer' above everything and can not get corrected by calibration.

  I found the solution on apple discussions:

  https://discussions.Apple.com/message/21532737#21532737

  It was in fact not an Adobe apps problem, even though to me it seems so it's a matter of dedicated auto-commutateur video card problem (or something like that) and the solution

  is: cleaning the cache of ColorSync, I have done as recommended with Onyx app and has worked well for me.

  It seems also come back after a correction of permission, but then just re--clean the cache color Sync.

• OSX suddenly stopped and restarted but does not restart. Lines of color on the screen

  Hello

  I'm on OSX 10.10.5 (I think) at least, I use EL Capitan. I can't tell the exact version, because my computer does not start correctly. The software is installed on an I mac for some time around mid-2011.

  The day began like any other day. I turned on the computer. Opens the web browser and lightroom. All of a sudden my screen turned gray and my second was a line downwards in the Middle, almost as if two screens of office have been posted on a monitor. Screens flashed several times with some funky patterns and then the system restarted with a carillon.

  When he did, white vertical bands turned towards the bottom of the screen while the Apple was displayed at startup. Sold turned screen gray, then rebooted again. This time, the bands were purple. It's the same thing again but next time the lines were orange and the system restarted a third time. At this point, I turned the computer off and tried again, but I was immediately greeted with several orange bands.

  Can someone help me find a solution or help me pin point the problem?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• Can I change the color of the screen when I open a new tab (I hate yellow)?

  On my iMac old when I opened a new tab, the screen was white. Now on my new iMac with Firefox 12.0, it is yellow. Since I like to leave a free blank tab so I don't accidentally lose an existing registered site, I see good yellow time. Possible to change the default screen color?

  Judge, with no luck, but thanks, I learned something new.
  Eureka! I just found in the preferences-> content-> fonts and colors. (now I think choosing a nice blue). Thannks, everyone for the encouragement...

• Satellite A300 - grayish colors on the screen

  Where to play games on my Satellite A300 (PSAGCA-02W010) and looking at photos of all colors seem a bit dull and grayish. When I called they said them it could be "limits the display" and I could have looked but I would be charged $120 if it was because of the limitations, I was wondering if anyone else has had similar problems with screens.

  It looks like my companion of hewlett packard LCD display which is very old.

  Any advice would be helpful!

  I have Satellite A300 and colors on the display are clear and bright.
  What games do you play? Something in the dark?
  Have you noticed the same thing if you use Vista OS for the daily work as Web-based applications or in the office?

• Re: Satellite L300 - vertical lines of color on the screen

  Hello
  All of a sudden my Satellite L300 has many colored lines running up and down the screen.
  have never seen this before on any pc, so do not know what could be the cause.

  have tried a search on this forum but found nothing relevant.

  need to know if its worth trying to fix...

  Failed to contact Toshiba other than the robot which is useless.

  Thank you

  I can't say for sure, but it might be faulty display.
  What you can try is to connect the external monitor or TV to the laptop and check if there is a problem on an external device. In case contrary it comes to the display and it should be replaced.

  Googling around you can check how much you must pay for the display again and do a rough estimate, if Exchange is the right option or not.