Similar Questions

• How can Iget the security/password code to set up my wireless printer. I had wireless for years, but I can't find the security code

  my laptop is part of my network with my office.  When I set up the network last year, I don't know where I put the password security code.  I need to install a wireless printer and it is looking for the security/password.  Where can I find it in my computer that should have kept this info?

  Cancel, I found the information I need.  Thank you

• iCloud often ask a security code 4 digits.  I have no idea what it is, my code is six digits.  What is the 4 digit version and where I put or find it?

  iCloud often ask a security code 4 digits.  I have no idea what it is, my code is six digits.  What is the 4 digit version and where I put or find it?

  Have you implemented 2-step audit on your Apple ID? If you do this, then whenever you connect to icloud.com you are likely to be asked for the security code, which will be sent by SMS to your device of 'trust' - mainly the mobile phone you have registered with Apple.

  The six-digit code that you think is probably the password in your iOS device, which is quite distinct.

• where can I find the security code to access my wireless network

  security key

  where can I find the security code to access my wireless network.

  Hello

  Check with the manufacturer of the router's support and most have forums and excellent documentation online.
  You should be able to access the router to set a new SSID and password if necessary.

  You must know the SSID (name of the router) and the password.

  If you do not know these you can find in the running on the WiFi system now with this
  free tool. This is not a crack, it should be run on a local computer that has access (or access)
  to your router. Sure, the information will not be there if Windows was reinstalled or information
  has been deleted otherwise.

  -FREE - WirelessKeyView recovers all the wireless network security keys/passwords (WEP/WPA) stored
  in your computer by the service 'Wireless Zero Configuration' of Windows XP and by the 'autoconfiguration WLAN service.
  service of Windows Vista. It allows you to easily save all keys to text/html/XML, or copy a single key to the
  Clipboard. (Works on XP, Vista or Windows 7).
  http://www.NirSoft.NET/utils/wireless_key.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I try to add a credit card to pay Apple for Apple Watch, field security Code only allows three characters, but my password for my Apple Watch is four.  What is the problem?

  When I try to add a credit card to pay Apple for Apple Watch, field security Code only allows three characters, but my password for my Apple Watch is four.  What is the problem?

  He is not asking for the PIN for your watch, he wants the security code 3 digits on the back of the credit card.

• find bios password for hp pavillion code # 68459741 dm4

  find bios password for hp pavillion code # 68459741 dm4

  Hello

  Try to enter: 77531387

  Kind regards

  DP - K

• How can I find the password for the secure on my computer network?

  How can I find the password for the secure on my computer network?

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Either you knew the password and have forgotten (in which case we cannot help you), or ask the person who set up the assistance network

  See you soon.

• whenever I sign in Skype, it does not except my password.they send me an email with a security code, I put that in, and he said: error

  my password ive tried signing in Skype.I do not remember that they send me a security code, in which I put that in, then he said: error?

  Could someone help me please

  It would be best if you contacted Skype support team regarding this issue.

  They are experts in the field of your request and would be in a better position to answer your concerns. You can contact them through this link:
  

  
  

  You can also join the community of users here:

  
  

  How can I contact Customer support https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service?intcmp=SN-Mods
  

• I get a request to (maybe) MS to find out where to send a security code on my hotmail account. The choices are my phone (not smartphone) or comcast email. Is - is this legitimate?

  I get a message that looks like it's from Microsoft on my Hotmail account. I am connected, but I can't yet see one of my mail until I answer the email from MS asking where to send a security code (if I need one).

  The choices are my home (landline) phone or my other email which is with Comcast.net account.

  I was finally able to access my mail after by checking a box saying to remember in 6 days. Was it really from MS? What is phishing?

  It's really true.  This security feature is that many companies use now, including Microsoft, Google, Facebook, Twitter and many banks.

  Basically, it protects you by making sure no one can access your account unless they have two things:

  1. Something you know (your password)

     and

  2. Something you have (your phone or to another e-mail account)

  Even if someone were able to guess or steal your password, they couldn't always access your account.

• mouse without border. Ask for a security code. where can I find

  I installed mouse without border. Ask for a security code. where can I find

  Help, please

  Hi Keyna,

  Thanks for posting your query in Microsoft Community.

  I understand that after I installed the mouse without borders to ask his security code.

  1. What is the brand and model of your computer?

  Please visit the links.

  http://blogs.technet.com/b/next/archive/2011/09/09/Microsoft-garage-download-mouse-without-borders.aspx

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35460

  Please do not hesitate to contact us if you need additional assistance. We would be happy to help you.

• How to find the security code seen

  Unable to connect to the network as don't have original security code

  Many routers appear the wireless encryption key/password in clear text. Copy on the wireless computer. Check the router site users manual or support to help manufacturers to enter the config pages.

  If the router does not display the key/password you can also see in the properties from another wireless computer Windows 7 wireless. Open network and sharing Center and click on Manage wireless networks left. Right click on your wireless network and select Properties. Click the Security tab and check Show characters . Provide the administrator password to display the key/password.

  http://sdrv.Ms/Spor94

  Finally if you have another wireless Windows 7, Vista or XP computer on your wireless network you can use Windows Connect Now [WCN] to copy the profile to a flash drive wireless.

  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html#Windows_Connect_Now

  Once the profile is located on the drive flash simply plug into the computer to transfer the profile.

• How can I get a security code on my wifi neighbors are tapping into my use

  the neighbors are tappin celine my wifi how can I put the security on my computer setting to stop it.

  \

  Hi Becc,

  Essentially, the procedure is to configure the router for the specific appropriate for your router, and your ISP and your computers and intranet security settings.  You do not block your computers, you encode router transmissions so that others cannot use it without the username and password.  Then you configure your computers (or other devices connected) so that they know the appropriate codes and can communicate with the router.

  When I came across this myself, I discovered that the manufacturer of the router charged; However, I discovered that my ISP supports this particular router and they helped me as well with the router and my computer for free as part of their service - so I'd personally start with your ISP to see if they will help you.

  The following article gives the basic instructions for the router (and a few different), but it only covers the router (and not your connected devices) and it indicates the options to use but sometimes 'the best' is not appropriate or accessible with your ISP or router and the computers (which means that it's OK to learn about it in a general sense (, but you need to communicate with people to get the correct settings).  For example I would use WPA2 but my ISP doesn't support WPA is what I use (and if I tried the other it wouldn't work and I would have had no. clue what I was doing wrong and be stuck and confused). http://www.ehow.com/how_6942409_set-up-wireless-router-security.html.  So think of this as simply a presentation guide but use the following instead.

  In short, to access the router, go to any computer connected and click on start / all programs / accessories / right-click on command prompt, and then click Run as administrator.  Then type IPCONFIG/all.  For your first login, you should see a group of settings as a gateway by default (and possible other inputs) referring to a TCP/IP address (usually 192.168.0.1 or something similar to that).  This is the address of your router.

  Open now IE (or your browser) and in the address field where you can type www.microsoft.com, sometimes rather type the address of the router (for example, 192.168.0.1) and enter.  This should connect to the router where it will ask for a user name and password (almost certainly).  If you know, very well.  If this is not the case, the access provider manufacturer or router can help.  Many use default common (which you should change once get you it, but remember).  Certain combinations of username/password common name include admin/admin, admin/password, administrator/administrator/admin password, simply administrator or with any other admin for the password.

  There must be a security section.  Need you probably to get a security Type (WPA-Personal, WPA2-Personal,...), a Type of encryption (for example, TKIP, AES,...) and a security network (password thinking) key.  The first two depend too much from your ISP and the installation program to help me (and you may have different options or more also)-they need to tell you what to use.  The manufacturer of the router can probably help with this - but the ISP knows and can tell you.  Use a key strong you want it is hard to break.  Here is an article on the creation of strong passwords - for this and especially since you know that you used, I would out max and go even a little further than they suggest: http://www.microsoft.com/security/online-privacy/passwords-create.aspx.  I would choose one with 12 numbers which is a random set of letters lowercase, uppercase, numbers, and symbols - but also one you won't forget but that is anyone's guess (that you don't really want to not have to reset it).

  Once set, so even if not recommended by the router or the people of the ISP because if you forgot your password again, they will not be able to help the router becomes a paperweight (but it prevents a person to reset the router using the same stuff, I suggested above to find one that works - if they were not working and you don't need help to identify it) I would consider changing the default user name and password reset so no one can use this method ignores everything and get (even if you notice that and eventually be locked out yourself - and quite well, they will have to have physical access to the router to reset it because I don't think that this can be done remotely).  I did it with mine.  Others choose not to bother because they assume that nobody's going to such extremes and it would make things easier if you needed help more later and I forgot the password.  It's your choice.  I did it because I'm a little paranoid and know that I forget - but for the most part, I suggest they leave alone that can be a bit going overboard.

  Then go to all devices connected wireless or another for the router and configuration, security codes to enable this device (your computers and perhaps a printer or other devices) to access the router and don't not blocked everything as your neighbors now will be.  Go to network connections and sharing, then the list of wireless connections and select the connection of your router and right click and click Properties.  Click Security and three above options should appear.  Change them to match what you used for the router and save the settings.  Now close the connection to the router (if it doesn't what shouldn't be) and re-establish a connection and you may in.  Do same for all devices (printers and other devices probably have special methods to change these settings and you may need help with these providers to find a way to review the security settings to connect to the router - but usually it's really not hard and you can probably work yourself or using self-help on the Web site of the device or the manual if you still have it).

  That's all.  You have now completed and you are sure.  Again, you will need help from the ISP with the parameters (and they can also help you with everything if you ask and you need), but with this exception, most of the time I think that you can usually do it on your own.  Go into the router manufacturer only if absolutely necessary and the ISP will not or can not help and you can't find try it yourself since many of them charge for this kind of thing (unless it is brand new and some even then) and you need information from the ISP in any case as the router manufacturer probably does not know the right settings for each provider (even if they do for many is not reasonable to assume that they know not just less likely to the ISP).

  I hope this helps.  Assuming that this has not already been moved on Windows Networking Forum, and if that didn't do the trick and you need more assistance, please repost it here: http://answers.microsoft.com/en-us/windows/forum/windows_other-networking?page=1&tab=all&tm=1300700638376.

  Good luck!

• lost my iCloud security code help

  Lost my iCloud Security Code, Help!

  Are you talking about the access code specifically for your iOS device? The page you came here from - linked at the top of this page - tells you what it takes (basically delete the device).

  But you said "iCloud", which has nothing to do with the password. You have 2 steps enabled audit? (Otherwise, the rest of this post is not relevant.) This requires you to have two of the three things - your password, a "trusted device" where code can be sent or received when you configure the recovery key. If you lose two of those three things no one can help you, including Apple. I hope you meant password, which means simply wipe the device and restore your data from your backup.

• I have to get a new security code every time?

  I'm mystified by the new security code, six numbers, which must be entered in iTunes and here even every time I sign my Apple ID and password. I thought it was a done deal in obtaining a security code. I never if I receive a new security code to each time.

  This is part of the two verification step for Apple ID - Apple Support two-factor authentication

  If you cannot connect with two-step verification using your Apple ID

• I need to find a password for a bookmark page

  I have three Scottrade accounts and I do not remember the a passwords.

  If you set Firefox to save passwords, you should be able to find this password in the Options > Security > saved passwords > show passwords.