find the best way to learn and begin to

Similar Questions

• What is the best way to import and work with mxf files in first CC2015?

  I am trying to find the best way to import MXF files in first, like many people there seem to be issues.

  I have already imported using first CS6 but I got cut short clips and audio dropouts. I decided to start over with CC2015 first, but this time I'd like to do things and once. Should I use prelude first?

  I run on a Mac Pro (mid-2010)

  OS X El Capitan version 10.11.1

  All good, got sorted. I use the prelude.

  Thank you!

• What is the best way to disable and uninstall Creative Suite 6 Master Collection?

  What is the best way to disable and uninstall Creative Suite 6 Master Collection. It is installed on the new MacBook Pro (OS X Version 10.8.2).) I sent the wrong Apple computer and have to uninstall the "master collection" and return the computer to Apple. Thanks, Gerard

  Activation, deactivation. Adobe products

  OS X Lion: install, update and uninstall applications : you can check for more documents on how to uninstall an application on Mac OS X.

  Thank you

  Nikhil

• What is the best way to move and organize records

  I recently bought a Mac Pro and have bought files across the FRO my windows laptop but what is the best way to organize the files iCloud or local drive and how do I move files in my list of "all files" in individual cases.

  In case you are not aware, all the files that you put in iCloud drive are on your disk local and iCloud.

  You can go to preferences in the Finder menu and specify whether you want iCloud drive to display in the sidebar of the Finder. I find that having it in the sidebar makes it easy to use. I also have other folders I used frequently in the sidebar; You can add the system ones (Documents, downloads, etc.) using this same preferences window. You can add folders that you created them by dragging to the sidebar of a Finder window.

  A way to move files into folders that you created is to open 2 windows in the Finder and drag it from one window to the other. Another option, if you move a file in one of the folders that is displayed in the sidebar is just do it from its current location in the main area of the Finder to the folder window in the sidebar in this same window of Finder.

• The best way to read and write?

  Hello

  I'm working on the project with labview.

  with this program I connect PC to MCU via modbus RTU sreial.

  in this program, there are some data must be read and some data they need to write.

  what I need is most of my reading polet exuted time except when some of the elements of control (as the edit box) changed by the user.

  every time something has changed by the user writing polet executed.

  now, what is the best way to do this?

  Best regards.

  Structure of the event within a while loop.  With the structure of the event, detect you the change of values and send the appropriate commands.  You can use the case of timeout for reading the State of the MCU.

• What is the best way to import and export images from the 5 d Mark II?

  Hello

  I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

  My questions:

  (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

  (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

  (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

  I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

  > used first lately

  A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

  1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

  - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

  2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

  1080 p http://forums.adobe.com/thread/995191 some work, some are not

  In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

  In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

  And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

• What is the best way to learn photoshop and other adobe products?

  I am an amateur photographer and all my editing was done in Lightroom. I know I have a unlimited creativity with my photos in Photoshop, and so the question comes up. I would like to learn how to use product to adobe as much as possible. What would be the best option? Graphic design of decision-making in a community college, to seminars, to youtube, books, day 2 courses etc... I know Adobe Tutorials but I would like to learn as much as I can out of Adobe.  Of the suggestions as to what type of courses or classes to take would be appreciated. Thank you in advance to Adobe and the Adobe community for your help!

  No doubt personal lessons are the best (short courses and colleges) - and the most expensive!

  There are some excellent books, such as quick start Guides and classroom in a book series.

  The tutorials of Trainsimple.com and Lynda.com online video training are also very good. You can get a free 10 day trial with Lynda.com to try.

  And you can always ask specific questions on the Adobe forums.

• What is the best way to create and release temporary CLOB parameters?

  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production on Solaris
  
  I have a procedure that calls another procedure with one of the parameters being an IN OUT NOCOPY CLOB.
  
  I create the temporary CLOB in proc_A, make the call to proc_B and then temporary free again.
  In proc_B I create a REFCURSOR and use with dbms_xmlgen to create XML.
  
  To make the code look like at bottom
  

  CREATE OR REPLACE PROCEDURE client_xml( p_client_id IN            NUMBER
                                         ,p_clob      IN OUT NOCOPY CLOB   ) AS
     v_rc         SYS_REFCURSOR;
     v_queryCtx   dbms_xmlquery.ctxType;
     
  BEGIN
     OPEN c_rc FOR
        SELECT col1
              ,col2
              ,col3
          FROM clients
         WHERE client_id = p_client_id;
  
     v_queryCtx := dbms_xmlgen.newContext(v_rc);
     p_clob     := dbms_xmlgen.getXML(v_queryCtx, 0);
   
  END;
  
  -------------------------------------
  
  
  CREATE OR REPLACE PROCEDURE my_proc AS
     v_clob       CLOB;
     v_client_id  NUMBER;
  BEGIN
     v_client_id := 123456;
  
     dbms_lob.createTemporary(v_clob, TRUE, dbms_lob.CALL);
     
     client_xml( p_client_id => v_client_id
                ,p_clob      => v_clob);
  
     dbms_lob.freeTemporary(v_clob);
  END;

  However, I just learned the hard way that IN OUT NOCOPY is a hint and Oracle sometimes creates a local variable for the CLOB in any case.
  One solution is to change the procedure of client_xml above
  

  CREATE OR REPLACE PROCEDURE client_xml( p_client_id IN            NUMBER
                                         ,p_clob      IN OUT NOCOPY CLOB   ) AS
     v_rc         SYS_REFCURSOR;
     v_queryCtx   dbms_xmlquery.ctxType;
     
  BEGIN
     IF NOT NVL(dbms_lob.istemporary(p_clob),0) = 1 THEN
        dbms_lob.createTemporary(p_clob, TRUE, dbms_lob.CALL);
     END IF;
  
     OPEN c_rc FOR
        SELECT col1
              ,col2
              ,col3
          FROM clients
         WHERE client_id = p_client_id;
  
     v_queryCtx := dbms_xmlgen.newContext(p_refcursor);
     p_clob     := dbms_xmlgen.getXML(v_queryCtx, 0);
   
  END;

  My concern is that in the case of Oracle creates a local variable, 2 temporary will be created, but there will be only 1 freeTemporary.
  This led to a memory could flee?
  Or should I be secure with the above solution because I am using dbms_lob. CALL?
  
  Thank you
  
  Arnold
  
  Published by: Arnold vK on January 24, 2012 11:52

  Why don't you:

  1 use a function instead of a procedure
  2. have the function create the temporary CLOB and fill
  3. what return them temp

  This way a copy of the CLOB object is created.

• Find the best way

  Hi all: after reading these articles, I could walk the circumference of a cheerio in half an hour. Well here it is

  With all of these programs to do what we want. Well, I chose Acronis then what is the difference between the perception of the copy; The cloning.

  Hello, kmann.

  Then, first I must point out that different providers define things a little differently. They are not far from each other, but in the end, it's really easy to get lost in the terminology from one vendor to another.

  On this basis, I felt I should do a little research of the good people of Acronis and found that they had a large enough base of knowledge (kb).

  This is the closest thing that I could find an answer to your question:

  KB.Acronis.com/.../1540

  So, in short, cloning IS copy and a "clone" is a copy of their definition. However, they distinguished a clone and a backup. (as explained in this article)

  I hope that answers your question.

  Have a great rest of the day!

• What is the best way to learn more about the storage of photos on my mac

  I have a few thousand pictures on my old Macbook Air in 2 years.  Also, I share my computer with my husband, so are some of his photos on it.  How I learned to organize the subsequent use?

  You will need to develop - there is no possible response to your current question and generally organizing Photos is purely personal - there is no way to 'best' - but most users agree that the use of pictures to organize is very powerful

  What exactly are you looking for?

  LN

• Help to find the best way to interior design (Nested Loops of sliders?)

  Oracle 11G

  First here the table I work with, for example data

  ID	FID	ANNOTATION	DESIGNATION	LOW	HIGH	SEQ
  1	1008755360	FC1053, 81-82	FC1053	81	82	1
  2	1008755360	XD, 3-24	XD	3	24	2
  3	1008756293	FC1053, 81-82	FC1053	81	82	1
  4	1008756293	XD, 3-24	XD	3	24	2

  Each FID is a different line, these two lines are connected physically, that's why I've shown them here on the table. Each line has a 'meter', in this case, each line has 2 lines of account that are the same.

  

  From there, we can say that FC1053, 81 and 82 are connected between the 2 cables. XD DESIGNATION means that cables are connect not really so I can't ignore those.

  We have a different way to show that they connect other than only those data and I need to connect each other too much. For this I need the Info

  FID1	LOW	HIGH	FID2
  1008755360	81	82	1008756293

  So my first design was the hepatitis hase sliders 2 with the data in the table, as shown above. I would then have a nested loop. The first slider to select the first record, then go down to the second loop where I compare all other records the first record and then go back in the outer loop to move to the next record, then return once again to the inner loop to compare the values again.

  LOOP1

  LOOP 2

  If LOOP1. IDF! LOOP2 =. IDF THEN

  IF LOOP1. ANNOTATION = LOOP2. ANNOTATION THEN

  -CONNECT THE DATA

  ON THE OTHER

  IF LOOP1. DESCRIPTION = LOOP2. DESIGNATION THEN

  IF LOOP2. LOW BETWEEN LOOP1. LOW AND LOOP1. THEN HIGH

  IF LOOP2. HIGH BETWEEN LOOP1. LOW AND LOOP1. HGH THEN

  -CONNECT THE DATA

  END IF;

  END IF;

  END IF;

  END IF;

  END IF;

  END LOOP;

  -Open and close done to reset the cursor to the front/top

  CLOSE CURSOR LOOP2;

  OPEN CURSOR LOOP2

  END LOOP;

  The problem with this approach is once the outside loop moves the next value of the IDF, that logic will connect them once again, but this time with the FIDs reverse which is essentially the same thing as it does not matter the direction in which they are connected. I almost feel that once I found the link I need to remove that line from the cursor (which isn't possible).

  FID1	LOW	HIGH	FID2
  1008755360	81	82	1008756293
  1008756293	81	82	1008755360

  I was able to

  1. make a list of all those I have connected and check against that

  2 use some kind of collection

  3. use a temporary table to hold the data

  4 something that I have not yet thought

  I really appreciate in advance for any help I get.

  If your query mapping is correct, this is the result of your query with the addition of the values of sum for the strand/down running.  Manually change the incorrect in the output bit numbers so that we can move on to find another solution.

  with gc_count like)

  Select

  Sum(current_high-current_low+1) on strand_high (g3e_fid seq order partition),

  Sum(current_high-current_low+1) more (partition of g3e_fid order of seq).

  strand_low (current_high-current_low),

  t.* from b$ gc_count t

  )

  Select

  a.g3e_fid, a.current_designation, a.current_low, a.current_high, a.strand_high, a.strand_low,

  b.g3e_fid, b.current_designation, b.current_low, b.current_high, b.strand_high, b.strand_low

  gc_count a, gc_count b

  where a.g3e_fid in (1008757155,1008757159,1009999655)

  and in b.g3e_fid (1008757155,1008757159,1009999655)

  and a.g3e_fid > b.g3e_fid

  and ((a.count_annotation = b.count_annotation)

  or (a.current_designation = b.current_designation

  and a.current_low b.current_low and b.current_high and a.current_high between b.current_low and b.current_high)

  order of b.seq

  /

  G3E_FID CURRENT_DESIGNATION CURRENT_LOW CURRENT_HIGH STRAND_HIGH STRAND_LOW G3E_FID CURRENT_DESIGNATION CURRENT_LOW CURRENT_HIGH STRAND_HIGH STRAND_LOW

  ---------- --------------------- ----------- ------------ ----------- ---------- ---------- --------------------- ----------- ------------ ----------- ----------

  GAGA GAGA 1008757159 1008757155 1 1 2 2 1 2 2 1

  1008757159 3 8 8 3 1008757155 3 8 8 3 F1DM F1DM

  1008757159 9 10 10 9 1008757155 9 10 10 9 F2 F2

  1008757159 11 14 14 11 1008757155 11 14 14 11 F1DM F1DM

  1009999655 17 18 6 5 1008757155 15 18 18 15 F2 F2

  1008757159 15 16 16 15 1008757155 15 18 18 15 F2 F2

  1009999655 21 24 4 1 1008757155 21 24 24 21 F2 F2

  7 selected lines.

  Elapsed time: 00:00:00.06

• The best way to manage and maintain the VM_Template VM using ESXi 3.5

  Hello

  I would like to know, how people do this by creating a guest VM to a VM_Template in ESXi 3.5?

  Previously I was using VMWare Server 2.0 and it worked by just copy paste the directory and then rename the file directory and the most important thing is the customization of the. VMX file

  is there a simple way to do?

  I use right now to copy - paste from my machine to the ESXi Server Veeam FastSCP 3.5u4.

  Thank you

  Kind regards

  AWT

  No, you can not - USB is not supported... Well, it may be, but you must use a USB to the device of the IP.

  http://www.VMware.com/PDF/esx_anywhereusb2.PDF

• ? the best way to test and calibrate a flow using a PCI-6602 meter?

  I don't see.  I want to take an E + H Promag 53 meter readings to a 6602 after a steady flow is reached.  store about 4 values in registers a minute apart.  compare to ESA and get the correction factor.

  So I can read the pulses flow and/or charges.

  in any case, I thought example would be much clearer and therefore I have modified your code shortly. have a look at.

• The best way to learn performance optimization?

  An area that has been lacking in my DBA knowledge was instance tuning. I'm pretty adept at SQL statement tuning (at least, to interpret plans and change SQL or a structure to make them better), but quite ignorant of the instance listening - how to set the good numbers of parameters, what to watch to make sure that everything is balanced, etc..
  
  Someone at - it care to recommend a book on this subject?
  
  I would prefer something that deals with 11g, but I guess that a book of 10, 2 - old era would be nice. I hope ever return to 9i ;-)
  
  Ideally, something that deals with approaches non - OEM - Oracle seems to assume everyone has bought OEM (and the pack of D & T), but this isn't always the case.
  
  Thank you!

  The 11g R2 Performance Tuning Guide (free, but sometimes does not indicate when a cost extra license is required, probably completely ignores Statspack and might be too focused on the OEM):
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16638/TOC.htm

  Troubleshooting book Oracle Performance (did a very good job of telling this property which requires costs of licenses and the good and bad, what can happen when you implement a suggestion - few initialization parameters is discussed, if I remember, you can read a mini essay I wrote about the book on Amazon's site):
  http://www.Amazon.com/Troubleshooting-Oracle-performance-Christian-Antognini/DP/1590599179

  If you have access to Metalink (MOS), take a look at 390374.1 Doc ID Oracle Performance Diagnostic Guide (there were a few errors in the guide when I checked a year previously, but overall very good reference).

  -------------------------
  Edit:
  I just took another look at the book of Troubleshooting Oracle performance via interface of Google Books - there are several pages that describe the function/impact of various initialization parameters:
  http://books.Google.com/books?id=b3DIkYO2gBQC&PG=PA179#v=onepage&q&f=false
  -------------------------

  Charles Hooper
  Co-author of "Expert Oracle practices: Oracle Database Administration of the Oak Table.
  http://hoopercharles.WordPress.com/
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

  Published by: Charles Hooper on November 17, 2010 13:39
  Provided the link to Google Books.

• ESXI hosts 5-2 and the best way to configure vSwitch and Nic redundancy

  Hi all

  Could someone help me find the best way to configure the vNetwork on 2 5 ESXI host for redundancy.  Once I managed to correctly configure the 2 hosts I will seek to use the same installation process for 6 guests.  3 sites with 2 hosts on each site managed all of vCentre Server

  I have 2 DL380 G7 servers 5 ESXI installed on a class 10, 8 GB SD card, I'm looking to install VSA on the 2 hosts on each server with 4 TB of internal storage (8 * 600 GB 10 k SAS).  Each server has a gigabit integrated 4-port NIC and I installed a 2nd NIC gigabit PCIe 4 ports, I also x 2 16 switches of port with Layer 3 routing.  I use vSphere 5 Standard acceleration Kit I am looking to use vCentre server for managing, vMotion for maintenance, HA for the failover and VM 10/15 (vCentre Server Std, DB SQL to vCentre Server, Exchange 2010, SQL Server 2008 R2, IIS Intranet, Helpdesk, 1 DC, 2 Domain Controller, AV Server, WSUS, SCCM Server, and Terminal Server server).

  What would be the best way to install and configure the network for performance and redundancy and am I missing something?

  My thoughts are, Teaming: -.

  vCenter - vswitch0 - port1 on NIC1 and port1 on NIC 2 - port1 on NIC1 to physical switch 1 - port1 on NIC2 to physical switch 2

  vMotion - vswitch1 - port2 on NIC1 and port2on NIC 2 - port2 on NIC1 to physical switch 1 - port2 on NIC2 to physical switch 2

  HA - vswitch3 - port3 on NIC1 and port3on NIC 2 - port3 on NIC1 physics 1 - port3 on NIC2 to physical switch 2 switch

  VM - vswitch4 - port4 on NIC1 and port4on NIC 2 - port4 on NIC1 to physical switch 1 - port4 on NIC2 to physical switch 2

  or do I need an additional NIC on each server to hit the VM 12-6 VM for 2 ports on 2 NETWORK interface card, or maybe something else I missed?

  Thank you

  In your case, to keep it simple and what I can say here is what would be my recommendation:

  3 standard vSwitches

  vSwitch0:

  • Management - vmnic0, vmnic2

  vSwitch1:

  • vMotion - vmnic1, vmnic3

  vSwitch2:

  • VM network - vmnic4, vmnic5, vmnic6, vmnic7

  The only reason why that I didn't split the VM in other network adapters shipped is because the difference in the types of the DL380 adapter shipped and the PCIe quad.