find the oracle home

Similar Questions

• FMW: Portal Upgrade Advisor - video part 4 patch the Oracle Home "how to install Oracle Middleware 11 g Rel 1 portal and discoverer" should specify to use previous pfrd Oracle Home

  NOTE: from 'build base Middleware of Oracle 11 g Architecture. "
  Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"
  Part 4 patch the Oracle home (04:57)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1

  The verbal and demo explanation does not use the original location/Oracle HOme of the previously
  installed for the binary PFRD base.   It probably should.

  In addition, for some steps to follow to patch binaries PFRD, I'd put it:

  Step 4.  I am guessing that the patch will establish an another sub dir Disk1 and don't want to overwright
  installation of the initial PFRD, therefore, moves the Group of hotfixes as follows.

  CD/opt/web/install/PortalUpgradeAdvisor/pfrd
  960 ls - ltr
  Group of hotfixes mkdir 961
  Group patches 962 mv p11060983_111140_LINUX.zip
  Group patches 963 cd.
  Unzip 964 *.

  RE: of course, having unpacked the group created patches another subdirectory Disk1 with his own runInstaller
  VNC gui:

  I guess, all we are doing is patching of binary files, nothing should be running.
  Maybe an environment set in same, as when we ran last the PFRD install, however.  There we / I had
  run. / set_mid_clean after making sure the files property was oracle: oracle.

  Yes, VNC gui and
  / opt/Web/Install/PortalUpgradeAdvisor/pfrd/Patchset/disk1
  . / runInstaller

  Here again, we select Install Software - is not configured
  RE: Get the message again on this screen "installs the software only. After said is finished, use
  config.sh at ORACLE bin directory to configure the working bodies of these components installed.

  Specify the installation location.  Always to
  Oracle Middleware homepage: / opt/oracle/Middleware
  and
  An Oracle home directory: as_2 # I bet it must be as_1 because that is where the initial PFRD install binary files has occurred.

  NOTE: The summary of the Installation in the video screen escape the Oracle Home is the previous specified during the initial installation. That is to say. PFRD_Binaries.   I guess I should have named that instead of taking the default as_1. At least I would have to have done that.  Well.  Maybe this story might help the next guy.

  Also

  NOTE: The Installation screen is not "from" group of patches as in the video where it says
  Install Oracle Portal, forms, reports, and discover the Group of hotfixes.
  

  Hi Charlie
  I'm a little confused by this feedback. Especially when you say that you see the option "install - do not configure. Should this option is visible only when you run the Basic 11.1.1.2 PFRD the software installer. The Group of hotfixes 11.1.1.4 has his own 'runInstaller'... and this will display what you see in the viewlet. You definitely run the installer from the directory of stage in the Group of hotfixes? (I'll do my own validation test - if I find something strange going on... I'll report.)

  I now take the following action

  1. I will put the Viewlet so it is clear that the Group of hotfixes is staged in a different place from the base 11.1.1.2 media
  2. provide that nothing must be running (because at this point, no instance of 11 g of construction has been configured)
  3. There's a "slippage" that illustrates the Middleware and Oracle Home entries in the screen "Location of Installation to specify" IE

  Middleware homepage: / u01/alca_portal/middleware
  Oracle home: PFRD_Binaries

  However, you will see that this slide for 2 seconds (which is an error) and if you miss it probably.

  Just FYI - the House of Oracle 11 g correction is in general the same procedure as patching a mid-layer House AS10g i.e

  -You set the Oracle Home base using the installation of the basic software program
  -You patch the Oracle home using the installation program of the Group of hotfixes

• Where can I find the oracle.adf.view.faces.model.UploadedFile

  Using JDeveloper 11.1.1.4.0
  
  Where can I find the jar containing the oracle.adf.view.faces.model.UploadedFile, or has she been depricated? The trinidad version changes the name of file, eliminating the way she. I hope that the version of Oracle does not. If the Oracle version is not available, is there a way to keep the full path in the version of the Trinity?
  
  Thank you
  Troy

  I've written a series of blog on file handles lately. Part 2 http://wp.me/pcBZk-bi has a working example.

  Timo

• Find the ORACLE of OS binary version

  Hello
  
  I want to know the binary Oracle version/version of the operating system itself.
  
  
  Background: I am preparing steps for the upgrade of my customer base. After the installation of the oracle binaries, I need to check the version of OS database for confirmation. But I'm not able to find the command for this requirement.
  Please help me.
  
  
  Thank you

  You really don't know where 'oracle' binary file?

  CD $ORACLE_HOME/bin
  Oracle strings $ | grep NLSRTL

• Need to find the Oracle Session with high CPU consumption and process of the BONE

  Hello
  
  I find the high use of the processor by the command "prstat. The host is running Solaris 5.10 64-bit with a database of Oracle 10.2.0.4.
  
  The grid, the high command is not available. What is the best way to find Oracle sessions using high processor and operating system processes.
  
  Thanks in advance.
  
  -Asif

  naveed27c wrote:
  Thanks, Justin.

  I have alread think SQL from Google. Now the problem is that I find the process of operating system level of Solaris.

  You can join V$ SESSION on the SID. The column PROCESS in V$ SESSION is the ID of the client operating system process.

  Justin

• IE 11 and find the Oracle sample aplpication field

  Apex 5.0.1 on apex.oracle.com,

  Apex 5.0.1 on my own server.

  Universal theme.

  The browser IE 11 incorrect display a search box (search) on the home page of the sample database Application:

  

  Other browsers (FF, Chrome) do not have this problem.

  Does anyone have any ideas on this?

  Thanks in advance.

  --

  Yava

  Uncheck the box 'Stretch form Item' solves the problem.

  --

  Yava

• Why can I not find the oracle.dbtools package

  Hello
  Im trying to develop an extension for sql developer. To complete my post, I need oracle.dbtools in the application. Everywhere I have look on the internet shows a few people who use it and for some reason any my JDeveloper find not what so ever. Where can I find this or what can I do to solve my problem.
  
  Thank you
  David

  David,

  Have you tried to look inside the following jar file in both

  1. a JDeveloper Studio 11.1.1.4 installation:...\jdeveloper\sqldeveloper\lib\oracle.sqldeveloper.utils.jar
  2. a SQL Developer 3.1 installation:...\sqldeveloper\sqldeveloper\lib\oracle.sqldeveloper.utils.jar

  Both contain an oracle\dbtools\raptor\newscriptrunner\CommandRegistry.class

  I reference 11.1.1.4 since, as you probably know, the scope of the SQL Developer extension uses is based on this version of JDeveloper.

  -Gary

• where to find the Oracle libraries

  I have a pot that runs in Linux32, with a JDK that includes the JDK to Oracle.
  I then tried in Windows32. I do not have a JDK Windows32, so I got error:
  java.lang.NoClassDefFoundError: oracle/javatools/util/CommandParser
  
  When can I get Oracle libraries which include CommandParser and other classes of Oracle? I think that if I install JDev for Windows32, it will bring the libraries. But do not know which way I must add to the classpath.
  
  Can someone please advise? Thank you!

  I installed JDeveloper 11.1.1.3 on Windows XP 32-bit. class oracle.javatools.util.CommandParser is contained in this JAR:
  \oracle_common\modules\oracle.javatools_11.1.1\javatools-nodeps.jar

  I use a nice freeware utility called JarScan, which allows me to quickly scan directories trees together to find jars containing specific Java classes. I recommend this utility, you can get it from https://jarscan.dev.java.net/

  Dimitar

• 2 products installed in the Oracle home

  Our security scanner indicates that our Oracle 10 g install has a vulnerability that should be address with the installation of CPUApr2011.  Our server is patched with each 10g CPU until end of life in August 2013, so I know that it is a false failure.  But a question I have is the opatch lsinventory command indicates that I have 2 products installed in my house from Oracle:

  -------------------------------------------------------------------------------------------------------

  Installed products of higher level (2):

  Oracle Database 10g 10.2.0.1.0

  Oracle Database 10g Release 2 Patch Set 4-10.2.0.5.0a

  There are 2 products in this House of Oracle.

  --------------------------------------------------------------------------------------------------------

  What is making say me?  Should I actually 2 installs Oracle in this House?

  Thanks in advance

  You have installed the 10.2.0.1.0 released and during this 10.2.0.5 basis. You release is 10.2.0.5.

  You can check this by

  (i) run sqlplus command line 'sqlplus-version '.

  (II) in the database "select * from version$ v.

  HTH - Antonio NAVARRO

• Find the Oracle data source...

  I inherited a ColdFusion 10 app with a backend Oracle 11g; Windows Server.    I am especially a DBA and not an expert in ColdFusion.  In the application code, they have the hardcoded data source.  In other words, when I move to Test I have to change the source data, load the modules and test.   After a successful test, I need to change the data source, once again, to download and the promoted to production.   I seem to remember in the old application, I used to support, the code was generic and the data source depends on what server you were lit; If the development, testing or production, you don't have to worry.  I don't remember how it was done.   What would be the best way to eliminate this hard coding and make it more automated?   I know I'm probably missing something, but you were all very helpful to me in the last few weeks, so I hope that he is not a stupid question.   Thank you.

  I do not have Admin CF

  You can specify that?  Do you mean that you do not have access to the CF Admin?

  Not having access to the CF Admin, I'm not sure you can do something differently as you are now., unless you're writing a logic to examine the server host name or the domain name of the site and set the source of data accordingly.

  If you can access the CF Admin, create two data sources: one for production and one for testing.  Then in application.cfc, you can write logic to examine the server host name or the domain name and indicate 'this.datasource' to whatever datasource is appropriate.

  -Carl V.

• Where can I find the Oracle 11 g R2 binary to upgrade on Windows Server

  Hi all
  
  I m trying to test external components with Windows Server and I want to test Oracle 11 g R2.
  
  The only resource I have is this Web site and the binaries only seem to be for Linux OS.
  
  Anyone know how I can upgrade my version of Oracle 11.1.0.7 to the R2 release?
  
  Thank you
  Bertrand

  user11869477 wrote:
  Thank you people for the quick response.

  Can I get an official contact of Oracle? You have no time to support for Windows Server?

  Thank you
  Bertrand

  No information has been provided. Just visit periodically http://www.oracle.com/technology/software/products/database/index.html

• Just installed ODT 11.1.0.6.20 but could not find the Oracle Explorer

  I downloaded and installed the latest ODT, but there is no Oracle Explorer under the menu option view in VS2008. Installation went well without error. I could see the new options under the Tools menu option debugging. I even uninstalled just the developer tools and reinstalled and it's the same thing.
  
  On my PC it has VS2003, VS2005, VS2008 and I chose VS2008 only for the ODT.
  
  Thanks for any help.

  Hello

  'Oracle explorer' has the old way worked what ODT. The current versions now directly integrated as a data source in the built in Server Explorer instead.

  It will be useful,
  Greg

• Give advice about uninstalling the database Client Oracle under Windows with multiple Oracle homes

  Hi all.

  Probably a Client of Oracle database uninstall will arrive in a Windows box, where there are several houses of Oracle:

  (1) the Oracle Database 11 g Client is.

  (2) the House of Oracle Oracle database server.

  (3) oracle 6i Oracle Home.

  I have these concerns:

  (1) do I stop Oracle Services NOT related to the Oracle Home being deleted? I guess that's not necessary, but it is recommended?

  (2) the YES program to run must be or is better to use the YES program located at removed Oracle (Oracle Client to Database 11 g in this situation)?

  "(3) I see there are additional post - installation according to section 5.3 steps"manually remove the Oracle database Client components remaining' the Oracle Client Installation Guide for Windows.

  Could someone provide the additional steps or recommendations?

  Sorry but I do not trust the windows plataform much!

  Thanks in advance!

  Best regards, Luis!

  Hello myluism,

  You can use the oracle supplied binary dinstall to uninstall oracle binaries that you can download from this url of Oracle Database 11 g Release 2 for Microsoft Windows (x 64) that looks good in your context.

  In addition, you can also uninstall the binary files by running the dinstall respecitive houses Oracle located in the path: ORACLE_HOME\dinstall.

  Please go through the url: https://docs.oracle.com/cd/E11882_01/install.112/e47959/deinstall.htm#NTCLI1326

  I hope this helps.

  Thank you and best regards.

• [INS-32104] User Oracle Home specified is not the owner of the Oracle Base specified.

  10 years of a row to install Oracle client, but not now.

  It is written error on step specify installation location

  [INS-32104] User Oracle Home specified is not the owner of the Oracle Base specified.

  Action - Make sure you specify the Oracle Home user who is the owner of the selected Base Oracle.

  I tried and different user to install, appropriating on c:\app\user

  authenticates users and led by different users, I tried all ways,

  but it won't start!

  Any ideas what to do?

  

  I want to use Dev of PL/SQL that uses the 32-bit client only.

  I do not have Oracle Support account, sorry.

  In fact I just fixed problem by changing the ORACLE_HOME again that is not yet created HOME

• opatch 10.1.2 Oracle Home - ERROR: OPatch failed due to problems in the area of patch.

  Hi all

  DB: 11.2.0.3.0

  EBS:12.1.3

  Operating systems: Solaris SPARC 64-bit

  I get the following error message on the command below:

  opatch $ apply - invPtrLoc $ORACLE_HOME/oraInst.loc

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  Oracle home: /d001/test1/apps/tech_st/10.1.2
  The Oracle Home Inventory: /d001/test1/apps/tech_st/10.1.2/inventory
  Inventory Center: / export/home/applmgr/oraInventory
  from: /var/opt/oracle/oraInst.loc
  YES location: /d001/test1/apps/tech_st/10.1.2/oui
  YES shared library: /d001/test1/apps/tech_st/10.1.2/oui/lib/solaris/liboraInstaller.so
  Location of Java: /d001/test1/apps/tech_st/10.1.2/jdk/jre/bin/java
  Location of the log file: /d001/test1/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.log

  The patch directory field must be a number.

  ERROR: OPatch failed due to problems in the area of patch.

  $ opatch version

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  OPatch Version: 1.0.0.0.64

  Tried the underside of the notes but the error persists. Even tried several times 'p6880880_101000_SOLARIS64.zip' to download and unzip on the server, but of no use. This question took place now for a few days.

  (Error: OPatch failed due to problems in the area of the Patch [ID 1281504.1]).

  Opatch error: The Patch Directory area must be a number [258650.1 ID]

  O patch 1.0 . 0.0.55 fails with the error 'the Patch directory field must be a number' [ID 394601.1]

  Patch Directory area must be a number: Opatch returns with the Code error = 170 [369555.1 ID]

  Please let me know any other suggestion is appreciated as the runinstaller from Patch 5983622 -Upgrade to Forms 10 g OracleAS and statement 10.1.2.3 (437878,1) fails after running root.sh Run specific tasks.

  I'm upgrading to 10.1.2.3.0 forms using - reclassification OracleAS g 10 forms and States to 10.1.2.3 (437878.1)

  Thank you for your time

  Kind regards

  user10088255

  Hi user10088255,

  Please follow the procedure under the section 'How to check the contents of the inventory Central' (Doc ID 742477.1) to check whether or not 10.1.2 ORACLE_HOME is registered in the central inventory. If it is not registered then follow one of the methods in the same doc to add.

  Thank you

  Hussein