2 products installed in the Oracle home

Similar Questions

• FMW: Portal Upgrade Advisor - video part 4 patch the Oracle Home "how to install Oracle Middleware 11 g Rel 1 portal and discoverer" should specify to use previous pfrd Oracle Home

  NOTE: from 'build base Middleware of Oracle 11 g Architecture. "
  Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"
  Part 4 patch the Oracle home (04:57)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1

  The verbal and demo explanation does not use the original location/Oracle HOme of the previously
  installed for the binary PFRD base.   It probably should.

  In addition, for some steps to follow to patch binaries PFRD, I'd put it:

  Step 4.  I am guessing that the patch will establish an another sub dir Disk1 and don't want to overwright
  installation of the initial PFRD, therefore, moves the Group of hotfixes as follows.

  CD/opt/web/install/PortalUpgradeAdvisor/pfrd
  960 ls - ltr
  Group of hotfixes mkdir 961
  Group patches 962 mv p11060983_111140_LINUX.zip
  Group patches 963 cd.
  Unzip 964 *.

  RE: of course, having unpacked the group created patches another subdirectory Disk1 with his own runInstaller
  VNC gui:

  I guess, all we are doing is patching of binary files, nothing should be running.
  Maybe an environment set in same, as when we ran last the PFRD install, however.  There we / I had
  run. / set_mid_clean after making sure the files property was oracle: oracle.

  Yes, VNC gui and
  / opt/Web/Install/PortalUpgradeAdvisor/pfrd/Patchset/disk1
  . / runInstaller

  Here again, we select Install Software - is not configured
  RE: Get the message again on this screen "installs the software only. After said is finished, use
  config.sh at ORACLE bin directory to configure the working bodies of these components installed.

  Specify the installation location.  Always to
  Oracle Middleware homepage: / opt/oracle/Middleware
  and
  An Oracle home directory: as_2 # I bet it must be as_1 because that is where the initial PFRD install binary files has occurred.

  NOTE: The summary of the Installation in the video screen escape the Oracle Home is the previous specified during the initial installation. That is to say. PFRD_Binaries.   I guess I should have named that instead of taking the default as_1. At least I would have to have done that.  Well.  Maybe this story might help the next guy.

  Also

  NOTE: The Installation screen is not "from" group of patches as in the video where it says
  Install Oracle Portal, forms, reports, and discover the Group of hotfixes.
  

  Hi Charlie
  I'm a little confused by this feedback. Especially when you say that you see the option "install - do not configure. Should this option is visible only when you run the Basic 11.1.1.2 PFRD the software installer. The Group of hotfixes 11.1.1.4 has his own 'runInstaller'... and this will display what you see in the viewlet. You definitely run the installer from the directory of stage in the Group of hotfixes? (I'll do my own validation test - if I find something strange going on... I'll report.)

  I now take the following action

  1. I will put the Viewlet so it is clear that the Group of hotfixes is staged in a different place from the base 11.1.1.2 media
  2. provide that nothing must be running (because at this point, no instance of 11 g of construction has been configured)
  3. There's a "slippage" that illustrates the Middleware and Oracle Home entries in the screen "Location of Installation to specify" IE

  Middleware homepage: / u01/alca_portal/middleware
  Oracle home: PFRD_Binaries

  However, you will see that this slide for 2 seconds (which is an error) and if you miss it probably.

  Just FYI - the House of Oracle 11 g correction is in general the same procedure as patching a mid-layer House AS10g i.e

  -You set the Oracle Home base using the installation of the basic software program
  -You patch the Oracle home using the installation program of the Group of hotfixes

• find the oracle home

  Hello
  
  DB: 8i and 10g and 11g
  OS: Redhat 5 and AIX 6
  
  We have 5 db in a test server with the same user name and is home to different oracle. People sometimes mistakenly launched the db to another oracle home. How to find an instance using what kind of welcome in the oracle server?
  
  How to find?
  
  
  Thank you and best regards,
  VN
  
  Published by: user3266490 on April 24, 2012 16:41

  Hello
  1. find the pid of a process instance
  2. / Proc //DLG is a link to $ORACLE_HOME/dbs
  Kind regards
  Franck.

• How to check if the discoverer is installed in the oracle application server?

  Hello
  
  I'm a developer, and I had an obligation to prepare a few reports of discoverer.
  
  However, I am new to Discoverer and as a result, I am facing problems during indexing of discoverer as Oracle Applications users.
  
  When I give the credentials, it asks me to choose a responsibility, and then he throws me error like "invalid username/password".
  
  applied patches according to metalink notes.
  
  but before that, I would like to know if I can really see whether or not the discoverer has been installed on the server of Oracle Applications.
  
  As my DBA also ignorant of the installation of discoverer, he also could not help me in this.
  
  How can we check if the discoverer has been installed on the server side and if not, how do install us it?
  
  Sorry for the stupid question.

  Hello

  The owner EUL is APPS and I might be able to connect to the Admin with this database user.

  I think you have an installation of database in mode EUL. You may not use APPS as the owner of the END user license. Therefore, you need to create a new mode of EUL requests in a separate schema.

  Is it possible that we can connect to Disco Admin/Desktop tool as a user of the database even though Disco is not installed on the server of Oracle Applications

  Yes, no problem. You only need server discoverer of applications if you want to use more or spectator.

  Rod West

• Patches to install for the oracle 11.2.0.2.0 database to serve as a repository

  Hi all
  
  This is the first time that I was installing oracle 11g grid control on suse linux x86_64 11.
  Documents, I came to know that we need to patch the database and weblogic server.
  IM, consider using the 11.2.0.2.0 database as repository.can you please let me know y at - it patches that should be applied to this version of the database.
  also, it would be great if someone share all the questions that may be raised during oracle 11 g on suse linux.i grid came to know that this is prerequsites.
  
  Undo tablespace must be at least 200 m in size.
  log_buffer must be minimum 10485760
  session_cached_cursors should be 200 or higher
  processes should be 500 or higher
  open_cursors should be 300 or higher
  
  are there others apart from that?
  
  
  Thank you

  Yes... You should apply these patches.

  Also check the MOS for more details:

  Required patches for Grid Control 11g (11.1.0.1.0) [1101208.1 ID]

  Concerning
  Rajesh

• Oracle Home is not valid on the TOAD

  Jin
  
  I installed Oracle Database 11 g (64-bit) on my computer of Windows Server 2008 R2 64-bit (Machine A).
  On my PC (Machine B) ' TOAD for Oracle Version 8.6 "has been installed. I could easily connect my database using the
  This TOAD. However after installing the TOAD 8.6 (or higher version 10) v. on my Machine (database server).
  TOAD gave the message that the * 'Oracle Home is not valid' * when I tried to connect the database.
  
  I couldn't have managed to fix this message, and for this reason, I could not connect my database locally my database server (Machine A)
  using TOAD 8.6 or v.10 v.
  
  Y at - it one thing miss me about TOAD or ORACLE?

  As already said TOAD is not a product of Oracle. See the system requirements for your version of TOAD (or ask Quest) that they already support 11 GR 2 in general and in particular the 64-bit version.
  GR 11, 2 on Windows was released a few days ago, I guess that 3rd party products need a little more time.

  Werner

• Give advice about uninstalling the database Client Oracle under Windows with multiple Oracle homes

  Hi all.

  Probably a Client of Oracle database uninstall will arrive in a Windows box, where there are several houses of Oracle:

  (1) the Oracle Database 11 g Client is.

  (2) the House of Oracle Oracle database server.

  (3) oracle 6i Oracle Home.

  I have these concerns:

  (1) do I stop Oracle Services NOT related to the Oracle Home being deleted? I guess that's not necessary, but it is recommended?

  (2) the YES program to run must be or is better to use the YES program located at removed Oracle (Oracle Client to Database 11 g in this situation)?

  "(3) I see there are additional post - installation according to section 5.3 steps"manually remove the Oracle database Client components remaining' the Oracle Client Installation Guide for Windows.

  Could someone provide the additional steps or recommendations?

  Sorry but I do not trust the windows plataform much!

  Thanks in advance!

  Best regards, Luis!

  Hello myluism,

  You can use the oracle supplied binary dinstall to uninstall oracle binaries that you can download from this url of Oracle Database 11 g Release 2 for Microsoft Windows (x 64) that looks good in your context.

  In addition, you can also uninstall the binary files by running the dinstall respecitive houses Oracle located in the path: ORACLE_HOME\dinstall.

  Please go through the url: https://docs.oracle.com/cd/E11882_01/install.112/e47959/deinstall.htm#NTCLI1326

  I hope this helps.

  Thank you and best regards.

• Install issue with the Oracle database Client in Hyperion 11.1.2.4

  We had problems try raising the EPMA server. I found digging that odp.net was necessary. It seems that we had missed client installation Oracle database on the machine. So I stopped the services and tried to install the client. It always ends with error:

  
  

  
  

  INFO: Loading file:/G:/Hyperion_Installation/Hyperion_11124_Installation/db64/Disk1/install/... beanstore/internship/shiphomeproperties. XML

  INFO: Translating the external format in raw format

  NEWS: Restoration of class file:/G:/Hyperion_Installation/Hyperion_11124_Installation/db64/Disk1/install/... oracle.install.driver.oui.ShiphomeMetadata/internship/shiphomeproperties. XML

  INFO: Loading Xml Bean store beans. [BeanStoreName:shiphome - metadata]

  NEWS: Development of the property: properties in the bean: shiphome-metadata

  INFO: the inventory location isC:\Program

  INFO: the inventory location isC:\Program

  INFO: Retrieve ASM Cluster File System information...

  INFO: the inventory location isC:\Program

  INFO: the inventory location isC:\Program

  INFO: estimated size for Administratorinstall is 1126.4000005722046

  INFO: Access path is: == > C:\Users\_HYPER~1\AppData\Local\Temp\OraInstall2015-07-16_08-27-52AM\jdk\jre\bin; C:\Windows\System32; C:\Windows; G:\Oracle\Middleware\dbclient32\bin; G:\Oracle\Middleware\dbclient64\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0; G:\Oracle\Middleware\ohs\bin; G:\Oracle\Middleware\ohs\opmn\bin; G:\Oracle\Middleware\ohs\opmn\lib; G:\Oracle\Middleware\ohs\perl\bin; G:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;.

  GRAVE: Name host [FATAL] [INS-32053] the specified Oracle already exists.

  CAUSE: The Oracle home name specified on the command line is a name of House of Oracle in the Central inventory.

  ACTION: Choose a different name at Oracle. Abandon this installation session and try again.

  INFO: Tips are ABORT

  INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set

  INFO: Completed state validating < getOracleHome >

  NEWS: Put an end to all operations in the background

  INFO: Finished all operations in the background

  INFO: Find the status of output more suitable for the current application

  INFO: Exit status is - 2

  NEWS: Stop Oracle Client install

  Now it looks like the issue is located here:

  GRAVE: Name host [FATAL] [INS-32053] the specified Oracle already exists.

  CAUSE: The Oracle home name specified on the command line is a name of House of Oracle in the Central inventory.

  ACTION: Choose a different name at Oracle. Abandon this installation session and try again.

  INFO: Tips are ABORT

  That means ODP.net cannot be installed in an existing home to Oracle. If this is not the case, how can I install it separately to get the job of EPMA.

  OK got it works by manipulating inventory. It seems that there is an old facility that was causing the problem.

• [INS-32104] User Oracle Home specified is not the owner of the Oracle Base specified.

  10 years of a row to install Oracle client, but not now.

  It is written error on step specify installation location

  [INS-32104] User Oracle Home specified is not the owner of the Oracle Base specified.

  Action - Make sure you specify the Oracle Home user who is the owner of the selected Base Oracle.

  I tried and different user to install, appropriating on c:\app\user

  authenticates users and led by different users, I tried all ways,

  but it won't start!

  Any ideas what to do?

  

  I want to use Dev of PL/SQL that uses the 32-bit client only.

  I do not have Oracle Support account, sorry.

  In fact I just fixed problem by changing the ORACLE_HOME again that is not yet created HOME

• EMP 11.1.2.3 System Installer fails to install the Oracle DB, 32-bit and 64-bit Client

  Hello

  We are trying to do a fresh install of Oracle Hyperion EPM 11.1.2.3 on Windows 2008 Server R2.

  Its a standard deployment with a Foundation Server and an Essbase server.

  When you try to install on the server of the Foundation, the EPM System Installer fails to install Oracle database customers.

  The first Question we have is, we have decided using Microsoft SQL Server for the repository of Shared Services and therefore would like to know if it is safe to ignore this error and move on.

  The second question is, if we need the error pending, we want to know why the installation system fails. Looking at the newspaper, ORACLE_HOME is on something that is not valid or is longer than 128 characters.

  The Diagnostics show the below error message:

  NEWS: Will copy both pre and post copy copy files C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Install Properties filename: C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Value oracle.install.customdeinstallcommand %ORACLE_HOME%/deinstall/deinstall

  INFO: Oracle.install.customizedeinstall set to true

  INFO: The value oracle.installer.ORACLE_BASEvar ORACLE_BASE

  INFO: The value oracle.installer.LibPerms 0755

  INFO: Value oracle.installer.summary_expand_nodes NewLangs, Global, space, Langs

  INFO: The value oracle.installer.LibExtns .sl,.sl.11.1, .so,.so.11.1,.sl.1.0,.so.1.0

  INFO: oracle.installer.mandatorySetup set to true

  INFO: oracle.installer.useORACLE_BASE set to true

  INFO: Oracle.installer.removeallfiles set to true

  INFO: Oracle.installer.additionaltool_continue_onerror set to true

  INFO:

  Specify Home Details Page *.

  INFO: Setting the property "OracleHome (ORACLE_HOME)' ' D:\Oracle\Middleware\EPMSystem11R1\... \dbclient32'." Has received the value of the command line.

  INFO: Setting the property ' OracleHomeName (ORACLE_HOME_NAME)' to 'OraClient11g32_sa-essbaseapp '. Has received the value of the command line.

  INFO: Definition of the 'OracleBase (ORACLE_BASE)' property ' D:\Oracle\Middleware\EPMSystem11R1\...------'. Has received the value of the command line.

  GRAVE: The Oracle Home name is not valid. Oracle Home names must be 128 characters or less and contain only alphanumeric characters and underscores.

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: User selected: Yes/OK

  INFO: Closing OUISetupDriver.JobExecutorThread

  GRAVE: [FATAL] [INS-10008] Session initialization failed

  CAUSE: An unexpected error occurred during initialization of the session.

  ACTION: Contact Oracle Support Services or view logs

  SUMMARY:

  - .

  See associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1096

  INFO: Tips are ABORT

  GRAVE: Unconditional exit

  INFO: Add ExitStatus FAILURE to exit status set

  INFO: Find the status of output more suitable for the current application

  INFO: Exit status is - 1

  NEWS: Stop Oracle Client install

  I got my answer in the newspaper.

  The ORACLE_HOME_NAME is the question.

  Our deployment account has a hyphen -, and so the Yes program is unable to initialize.

• opatch 10.1.2 Oracle Home - ERROR: OPatch failed due to problems in the area of patch.

  Hi all

  DB: 11.2.0.3.0

  EBS:12.1.3

  Operating systems: Solaris SPARC 64-bit

  I get the following error message on the command below:

  opatch $ apply - invPtrLoc $ORACLE_HOME/oraInst.loc

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  Oracle home: /d001/test1/apps/tech_st/10.1.2
  The Oracle Home Inventory: /d001/test1/apps/tech_st/10.1.2/inventory
  Inventory Center: / export/home/applmgr/oraInventory
  from: /var/opt/oracle/oraInst.loc
  YES location: /d001/test1/apps/tech_st/10.1.2/oui
  YES shared library: /d001/test1/apps/tech_st/10.1.2/oui/lib/solaris/liboraInstaller.so
  Location of Java: /d001/test1/apps/tech_st/10.1.2/jdk/jre/bin/java
  Location of the log file: /d001/test1/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.log

  The patch directory field must be a number.

  ERROR: OPatch failed due to problems in the area of patch.

  $ opatch version

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  OPatch Version: 1.0.0.0.64

  Tried the underside of the notes but the error persists. Even tried several times 'p6880880_101000_SOLARIS64.zip' to download and unzip on the server, but of no use. This question took place now for a few days.

  (Error: OPatch failed due to problems in the area of the Patch [ID 1281504.1]).

  Opatch error: The Patch Directory area must be a number [258650.1 ID]

  O patch 1.0 . 0.0.55 fails with the error 'the Patch directory field must be a number' [ID 394601.1]

  Patch Directory area must be a number: Opatch returns with the Code error = 170 [369555.1 ID]

  Please let me know any other suggestion is appreciated as the runinstaller from Patch 5983622 -Upgrade to Forms 10 g OracleAS and statement 10.1.2.3 (437878,1) fails after running root.sh Run specific tasks.

  I'm upgrading to 10.1.2.3.0 forms using - reclassification OracleAS g 10 forms and States to 10.1.2.3 (437878.1)

  Thank you for your time

  Kind regards

  user10088255

  Hi user10088255,

  Please follow the procedure under the section 'How to check the contents of the inventory Central' (Doc ID 742477.1) to check whether or not 10.1.2 ORACLE_HOME is registered in the central inventory. If it is not registered then follow one of the methods in the same doc to add.

  Thank you

  Hussein

• 11 GR 2 Oracle home path

  Hello
  
  It is a matter of design rather than a technical problem.
  
  With Oracle OFA paper [http://download.oracle.com/docs/cd/E11882_01/install.112/e17162/appendix_ofa.htm#BABHAIIJ].
  
  The grid and the Oracle Home are suggested to be:
  /*/app/Oracle/product/11.2.0/DB* for Oracle Database 11g oracle directories
  /*/app/Oracle/product/11.2.0/grid* oracle home directory for the Infrastructure of grid of Oracle 11 g for a stand-alone server for the oracle user
  
  
  However, I have read that there 11.2.0.2 group of patches, which is a new full version.
  Oracle recommends to have the upgrade of Out-of-place (this is Oracle recommended to apply a patch to the game. You install the hotfix in a new, separate Oracle home location) and this is Oracle approach in the future.
  Grid, it must be upgraded out of place.
  
  So does make sense that I should install the Oracle home /*/app/oracle/product/11.2.0.x/grid* and '/*/app/oracle/product/11.2.0.x/db* '?
  
  
  Thank you.
  
  Rocky

  Welcome to the forums!

  This is a valid and good question. I think that your approach is logical, given that future update sets (11.2.0.3 etc.) would be also (I hope) released that installs complete and will very likely need to be installed in separate houses.

  HTH
  Srini

• Why ORACLE HOME USER 12.1.0.2 LIMITED to SINGLE INSTANCE?

  Thank you for taking my question!

  
  I installed my first database 11g to 12.1.0.2 under windows (no cars).  I need help understanding new ORACLE HOME of the USER to affect my c 12 databases.

  
  The documentation below States "when YES creates the account of USER ORACLE HOME it can only be used by a database unique instance".  I don't understand why I can't add another instance and use the same YES program created the USER account to the HOME of ORACLE page?  Why choice is (1) differs from the number of choices (2) given that both can be local accounts?   In addition, if you are unable to sign the USER ORACLE HOME, how that affects the OEM or OEM agent running on the database target?

  Thank you!

  Kathie

  When installing YES offers three options to associate a user Oracle Home of the Oracle home:

  1. leave YES create a new user account to do as a user in the Oracle home page.
  This option of the newly created user has the rights to connect to the server.
  This can only be used for Single Instance databases.

  
  2. Select an existing local or a domain as account being the user Oracle Home.
  If the existing account has login privileges, then Oracle Home user will have login rights to the server.
  This must be a nonadministrator user.

  
  3. Select a built-in account as the user Oracle Home.
  In this local Service option / built-in account Local system will become user Oracle Home.

  So if you do not use CARS, so it's no problem. The documentation seems to say that Option 1 cannot be used with CARS, not Option 1 cannot be used with multiple instances.

• Version of the Oracle client

  Anyone help Pls!
  How to check the version of the oracle client installed on my local pc (windows xp)?
  I went to start all programs, I can see oracle 10g, 81,92 on my pc.
  At the command prompt, I entered sqlplus /nolog it shows the version, but they say it's the version of the server.

  If we are talking about an Excel spreadsheet with a macro in VB using ODBC to connect to the Oracle database, which ODBC driver are you using? Assuming you are using one of the ODBC Oracle driver path is irrelevant. The driver name should include the name of the Oracle House (that is to say, the ODBC driver will be named 'Oracle in OraHome92' If you use the ODBC driver in the Oracle home "OraHome92" which, no doubt, would be the home Oracle 9.2 (if there are multiple Oracle homes on the machine with the same version of the Oracle client or if you chose the default names for your Oracle homes that do not include the version number , you can search the registry - that is to say the path of specific directory for a particular Oracle home HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST. INI\Oracle in OraDb11g_home1\Driver will be the full path to the SQORA32. DLL which corresponds to the ODBC Oracle driver OraDb11g_home1 hospitality Oracle on my machine - but that is probably farther in the herbs you want to go). If you use the (long) since depricated Microsoft ODBC driver for Oracle, then the PATH comes into play because this driver is not consistent stream.

  Justin

• Messenger of the Oracle

  Hi all.
  I'm testing the functionality of Oracle beehive.
  
  I installed the hive 1.4.3.0 + beekeeper 1.4.3.0 on windows 2003. I tried to find in the documentation and the oracle home page, where to download messenger to oracle to use with Oracle Beehive, but without success. Where can I download Oracle Messenger?
  
  Concerning
  
  Groxy

  Oracle Messenger is not part of the hive of Oracle.
  To test the IM feature, there is a wide range of XMPP client, you can try. Pidgin, exodus, Psi and iChat on the Mac are all customers, I used.

  Richard